Slashdot Mirror


Scientists Achieve Perfect Efficiency For Water-Splitting Half-Reaction (phys.org)

Dthief writes: Splitting water is a two-step process, and in a new study, researchers have performed one of these steps (reduction) with 100% efficiency. The results shatter the previous record of 60% for hydrogen production with visible light, and emphasize that future research should focus on the other step (oxidation) in order to realize practical overall water splitting. The main application of splitting water into its components of oxygen and hydrogen is that the hydrogen can then be used to deliver energy to fuel cells for powering vehicles and electronic devices. The process involves exposing the water to a mass of platinum-tipped nanorods, with visible light driving the reaction. The 100% efficiency refers to the photon-to-hydrogen conversion efficiency, and it means that virtually all of the photons that reach the photocatalyst generate an electron, and every two electrons produce one H2 molecule. At 100% yield, the half-reaction produces about 100 H2 molecules per second (or one every 10 milliseconds) on each nanorod, and a typical sample contains about 600 trillion nanorods.

9 of 130 comments (clear)

  1. Oh well. by sims+2 · · Score: 4, Funny

    Too bad there aren't any uses for oxygen.

    --
    Minimum threshold fixed. Thanks!
    1. Re:Oh well. by ShanghaiBill · · Score: 5, Interesting

      the cheapest way to store the oxygen so you can use it later is to not store it, releasing it into the atmosphere, and later just use "air" for the reaction. :-)

      Not when you consider the total cost. Air is about 78% Nitrogen, which leads to a lot of inefficiency. Most engines will run much more efficiently with straight O2, or even O2 and some other substance such as injected water. Coal burning power plants that do carbon sequestration use air stripped of N2 so they don't have to separate the CO2 from the N2 in the exhaust. Nitrogen in a combustion chamber also leads to a lot of nasty pollutants that are difficult and expensive to remove. If you are producing pure O2, just venting it into the air is a big waste.

    2. Re:Oh well. by dbIII · · Score: 5, Funny

      Nitrogen in a combustion chamber also leads to a lot of nasty pollutants that are difficult and expensive to remove

      Not that hard just add water and pipe it away as very weak nitric acid which is pretty well how "scrubbers" work.
      At a power station where I did some work the new manager decided he wanted nice white smoke coming out of the stack for PR reasons. So somebody played with the settings on the scrubber injecting a lot of water into the exhaust which came out as nice white steam. That night was very still, the water condensed out of the air and the utility had to pay for repainting thousands of cars in the city that had nitric acid damaging the paintwork.

    3. Re:Oh well. by currently_awake · · Score: 4, Interesting

      Hydrogen is a terrible energy source. The gas has very low energy density (big gas tank), compressing it takes a lot of energy, and it leaks through holding tanks. The money that is being wasted on the hydrogen economy should be directed into broadcast energy or putting power rails into the roads.

    4. Re:Oh well. by thegarbz · · Score: 5, Interesting

      False.

      Pure O2 is the only thing which breaks the fire triangle (fires require oxygen, fuel, and ignition sources)

      It's oxygen, so that's one corner of the triangle.

      It turns almost anything into a fuel and handling it is incredibly difficult because of this. For example pure O2 pipelines have "fuses" put into them which is basically a section of teflon pipe with high pressure water jets directed at it because the metal pipework itself becomes a fuel in the presence of pure O2. Most things which aren't a fuel in normal air burn spectacularly in the presence of concentrated O2. That's the second corner of the triangle.

      Also pure O2 is easily ignited by any particles in the O2 stream. There's a separate specification for construction and cleaning of O2 carrying systems on top of the standard pipe spec because of this, as well as special ordering requirements for any equipment used in O2 services. If that isn't bad enough it can spontaneously combustion due to adiabatic compression by something as simple as a valve moving too quickly. That's the final corner of the triangle.

        In industry O2 is handled like an explosive and highly volatile substance. The exception is when it is in stationary containment (i.e. a gas cylinder). In most plants handling pure O2, the pipework has special identification on it to ensure people stay the heck away from it.

  2. Re:Still has the problem of night by wbr1 · · Score: 4, Informative

    This is not a solar energy 'scheme'. It is a more efficient method to produce hydrogen for fuel cells. I too am a fan of nuclear, properly done, but solar energy and solar processes have their place in a good energy mix.

    --
    Silence is a state of mime.
  3. Re:what do they mean with two step? by michelcolman · · Score: 5, Informative

    They are not splitting water at all. They are just encouraging individual H atoms (H+ ions, or basically protons) to combine into H2 molecules.

    Normally, even pure water has a whole lot of individual H+ ions floating around in it, and the same number of OH- ions. Those H+ don't combine into H2 because that would require extra electrons, which are stuck in the OH- ions. That's why you can create H2 using an electric current which delivers the missing electrons so the H can pair up. (This doesn't work very efficiently in pure water, but a bit of catalyst helps a lot.)

    Acidic solutions have more H+ (along with negative ions from the acid, like for example HSO4-), basic solutions have less H+ (and more OH-)

    Apparently the researchers are using a basic solution (high pH, lots of OH- and less H+), and then using photons to liberate electrons from the OH- to allow H+ to combine into H2.

    This works best in a basic solution because the problem is not so much the number of H+, but rather the number of OH- ions that can be persuaded to give up an electron by nudging them with a photon. In an acidic solution, most of the eligible electrons are stuck in the negative ions from the acid which are much more possessive of their electrons.

    The big novelty is apparently that they can get the OH- to give electrons to the H+ and let them combine into H2, rather than combining back into H2O.

  4. Re:what do they mean with two step? by tburkhol · · Score: 5, Informative

    Apparently the researchers are using a basic solution (high pH, lots of OH- and less H+), and then using photons to liberate electrons from the OH- to allow H+ to combine into H2.

    That would leave you with uncharged hydroxyl radicals with an unpaired electron, so I don't think that's what they're doing. They are only talking about the reduction half reaction (2 H+ + 2e- --> H2). There has to be an oxidation half reaction. You're proposing (OH- --> OH + e-), but they're talking about splitting water, ie : 2 H2O --> O2 + 4 H+ + 4e-

    I suspect they need the high pH to let the H2 diffuse away.

  5. Re:Still has the problem of night by omnichad · · Score: 4, Informative

    Solar power is a distraction from energy production schemes that actually work.

    Solar power is the root of all energy production schemes that actually work. With maybe an exception for nuclear. It's the only energy input into our otherwise closed system. Oil and coal are both sequestered solar power, while wind and hydro are both driven by solar power converted to heat.