Study Finds That Humidity Has More Effect On Drive Failures Than Temperature (rackcdn.com)

AmiMoJo writes: A study by Rutgers University and Microsoft has found that hard drives are more prone to failure due to high levels of humidity [PDF] than high temperature. With a view to 'free cooling' data centres (using low external air temperature for cooling to save power), the paper notes that humidity related malfunctions of the driver controller / adapter are the dominant cause of drive failure. The good news is that while the researchers found that high relative humidity was a significant factor in drive failures, "[S]oftware availability techniques can mask them and enable freecooled operation, resulting in significantly lower infrastructure and energy costs that far outweigh the cost of the extra component failures."

Comments

My experience this is true

[Anonymous Coward]

I run a server in my basement and have more trouble with its drives then any other computer I have ever owned. I have left notebooks in hot cars, outside in the sun, exposed them to extreme cold too. But my basement always maintains at least a 50% humidity level even with dehumidifier. Its temp remains between 60F in Winter and 70F in Summer. I noticed one day my router was failing and decided to tear in down, and also realized its soldered board was oxidizing badly which most likely caused the failure. I then wondered if that was the same issues with my server? I do think too little humidity can also cause spurious static charges too so you don't want to not have some. maybe its time to rethink what acceptable is in humidity? I always thought below 50% was OK? But maybe below 40% is the sweet spot?