Millennials Unearth an Amazing Hack to Get Free TV: the Antenna (wsj.com)
From a report on WSJ: Dan Sisco has discovered a technology that allows him to access half a dozen major TV channels, completely free. "I was just kind of surprised that this is technology that exists (alternative source)," says Mr. Sisco, 28 years old. "It's been awesome. It doesn't log out and it doesn't skip." Let's hear a round of applause for TV antennas, often called "rabbit ears," a technology invented roughly seven decades ago, long before there was even a cord to be cut, which had been consigned to the technology trash can along with cassette tapes and VCRs. The antenna is mounting a quiet comeback, propelled by a generation that never knew life before cable television, and who primarily watch Netflix , Hulu and HBO via the internet. Antenna sales in the U.S. are projected to rise 7 percent in 2017 to nearly 8 million units, according to the Consumer Technology Association, a trade group. Mr. Sisco, an M.B.A. student in Provo, Utah, made his discovery after inviting friends over to watch the Super Bowl in 2014. The online stream he found to watch the game didn't have regular commercials -- disappointing half of his guests who were only interested in the ads. "An antenna was not even on my radar," he says. He went online and discovered he could buy one for $20 and watch major networks like ABC, NBC, Fox and CBS free.
Get a HDHomeRun and you can watch broadcast TV from pretty much any modern device. Each one has two tuners, and they can be split across devices. Want to record? Connect a cheap NAS. Want more than two channels at once? Just get another one -- they work in tandem.
Been using these for about a decade now and couldn't be happier. The quality is even better than basic cable because you don't need to deal with their re-encoding antics.
Umm, no. Early televisions had dual telescoping antennas in a dipole configuration, for reception of VHF signals (channels 2-13). What you're thinking of is the 'bowtie' configuration that was used for UHF - that came later. The early dipoles were called 'rabbit ears' because you adjusted them at various angles to improve reception. Now, get off my lawn!
This was posted here on slashdot years ago... I followed the instructions and it worked EXTREMELY well. When I hooked it up, it picked up 30-40 stations around the Phoenix metro area without a glitch. I used a scrap piece of 2x4, so I put the ugly thing up in the attic, and my entire house can hook into it. Less than $10 out of pocket (needed some washers, screws, and a UHF/VHF transformer from Radio Shack.)
Coat Hanger HDTV Antenna
Can you explain the joke for those of us who didn't grow up with antennas?
The joke is about CDs (compact discs) and coloring the edge of the CD to improve sound quality.
http://www.snopes.com/music/me...
I built my own antenna and bolted it to some supports in the roof. It works gangbusters for pulling in channels 40+ miles away and only cost me about $20 in materials, plus a couple of hours to put it together and get it mounted. Mostly of the cost was the spool of aluminum grounding wire (intended for lightning rods).
The plans
I read the internet for the articles.
All of my TV watching is OTA broadcast. I used to record analog with TV capture cards. I also used them to 'digitize' my old VHS tape recordings so I could get rid of the VHS tapes. (Digitizing preserved the recordings, and also allowed quicker access since I didn't have to fast forward to watch something recorded on the tail end of a 6 or 8 hour tape.)
When the USA switched to digital by mandate, I had to adjust. It took some doing and maybe I can offer some useful tips. A lot of stuff is European which uses a different system than the USA which uses ATSC. So, if you're European, or if you're searching the 'net and come across some European software like say kaffeine, beware.
MythTV gets a lot of attention. I never got it to work and it seems like overkill to me anyway. What I use is me-tv. That's an unfortunate name because if you google me-tv you get a lot of false hits.
Me-tv doesn't work well with ubuntu (something about gui libraries.) It also doesn't work very well with pclinuxos. But it works very well with Mint and Devuan! It's not really good for watching 'live'. But, you can start it recording and then watch the recording while it's being recorded with vlc or mplayer or something like that, and, depending on when you start watching or how far you've skipped ahead, you may be only seconds behind the live broadcast. Also with those players you can pause, go back, whatever, while it's continuing to record the program.
When you've installed me-tv and first start it up, you do a scan and it finds the local TV stations. Then edit the channels list it created. Also be sure to edit the preferences as the default settings can be pretty wrongheaded, like starting a recording 5 minutes in advance and continuing after you've specified it should stop. You can put it in your 'startup applications' with the invocation /usr/bin/me-tv -s -m. This way it will start up automatically in the background and quietly record programs you have specified. But, if you're using a USB stick that has custom firmware this might not work because the OS has to find and configure the USB before it starts me-tv. My pcHDTV hardware has no problem because it's hardware support is build into the kernel, but with my Hauppauge TV stick, I have to worry about timing.
Some stations will broadcast several programs at once and you can record several at a time if they use the same base carrier signal. If the station is broadcasting in full HDTV you get a nice high res picture. If they multiplex several shows, which happens a lot for local community and religious stations, you'll get a lower res picture. But there's a lot out there. If you like some of the PBS programs like 'Nova', it's nice to get the high resolution videos of nature. (Just so you won't think I'm too much of a culture vulture, I also watch 'Supernatural', and see it in all its 1280 by 1024 glory.)
If you use a hauppauge tv tuner stick you have to copy a small file to /lib/firmware to get it to work. For my particular hauppauge the file name is xc3028-v27.fw, but it probably varies dpending on whihc model you have. Besides hauppauge, I've used pcHDTV which works 'out of the box' on newer systems.
I hope this saves some of you some of the pain I went through getting all of this to work.
In theory, theory and practice are the same; in practice they're different. (Yogi Berra & A. Einstein)
Make sure your antenna receives UHF in addition to VHF. Lots of older antennas were VHF-only (channels 2-13).
Remember that the digital channel number shown on the screen now doesn't necessarily correlate to the actual radio channel. In our area, digital channel 7 (7.1, 7.2, 7.3) is transmitted at the pre-digital channel 21 frequency band.
An outdoor antenna with an outdoor amplifier is also recommended for fringe or rural areas.
Broadcast TV works pretty well in our rural area. Lots of people have dumped $60-120/month satellite subscriptions.