This is beyond niche and solved by access policy. What OP is describing only describes a way to make a weird, less secure (more attack surface area) edge case for the IT department to deal with.
I doubt this will happen, since time and again, Paul's definition of freedom in this case is freedom for the ISPs to do whatever they want. Net neutrality requires regulation, but what will actually happen under this type of plan is deregulation.
I hate this argument. Yes, it would be nice if more people were to help solve our problems, but it's unreasonable to expect that everybody focuses thier attention on that. Besides, who's to say that this technology isn't adapted successfully for wheelchairs?
In most games, there is a quick load/quick save feature. For some reason, F4 and F5 seem to be common default keys for this. Anyways, I always use the feature, and save normally only occasionally, in case I want to start a level over, for example.
1) Use a fine grit sand paper to clean the contacts on the games as well as the pin connector
2)(This is for other readers, I guess). You don't need to buy a new connector. Take your nes apart, and use a small screwdriver to pry all the pins up slightly.
3) Use a game genie. It's a tighter fit, and usually solves the problem (you don't have to use the codes if you don't want to). This might be a good solution for you since you can leave it plugged into the nes always, instead of pulling out your pin connector trying to remove it. It's ugly because it sticks out though
4) Find one of those rare top-loading nes machines.
5) Find one of those ultra-rare arcade nes machines
Does anyone else wonder why so much effort is going into producing higher and higher resolution, while the relatively low framerate of even the "best" technology stays at like 24fps? Sure, it's usually not noticable, but I find it very distracting at times. For example, during pan shots and action sequences with a lot of motion. in fact, I get slight headaches sometimes if movies pan frequently, particularily at the theatres.
I really don't know enough about china to make any sort of general statement (in other words, this probably does NOT apply to china as a whole). However, a friend of mine sat in on high school classes in Harbin (Harpin?), China as part of a cultural exchange program. I was surprised by some of the things she told me. Some of the chinese students were shocked that she had the freedom to choose her courses and had spare time on week nights. The chinese students had no choice and had classes about 12 hours a day, 6 days a week (that's about 3 times as much as I did). Also, the students must do follow-the-instructor type exercises each morning. But the worst thing I heard was this: in english class, the students were not only taught the language, but *what to say when people ask thier opinions*. For example, the students were taught to say specific bands if asked "what is your favorite band?" Similarily they were told to say pizza and macaroni if asked about favorite foods. In other words, they were told to act like a stereotypical american when around americans. Oh, one more thing, when english speaking people are present in the school, everyone mucst speak english *at all times* or else face suspension.
2000-01-02 means year-month-day (2000-January-2nd), I believe. This way if you have a bunch of dates in this format and list them numerically, then the list will also be chronological. If it were year-day-month or if the month were spelled out it would not work this way. So you can see, it's more convienient as year-month-day (each one represented by a number).
Some airlines actually hand out adapters if you ask for them, so that you can use your own headphones. I've also been on one that handed out regular headphones as well as adapters so that you could use them with the plane's dual plug system. And, you can always use your own headphones without an adapter if you don't mind mono.
In a word, yes. They are made by packing the tracks more tightly together relative to 80 minute cd's, in the same way 80 minute cd's have tracks packed close than 74 minute cd's. Now, it seems obvious that some drives would fail to read/write to them because they were not designed for such large capacity, and that's true. But the reason why they won't read/write may surprise you. Most drives, including those in stereos, etc, can handle the higher track density in 80 and even 99 minute cd's. BUT, the original cd specifications from like 20 years ago called for a maximum of 80 minutes. As a result, most cd burners could only burn a maximum of 80 mins. When 80 min cd's started becoming popular manufacturers updated thier firmware to support more than 80 mins (I believe most support 89 minutes). Therefore, most current burners will fail with 99 minute cd's after the 89 minute mark. After this point they will assign negative time values to the tracks and then the drive and software similtaneously give up. If you successfully burn over 89 minuts with an average drive, it probably won't work in your stereo past 89 minutes. Newer drives that support 99+ minutes though will probably produce cd's that will work fine in your stereo. The most common problem reported with them is the inability to manually select tracks. In other words, they cd will only play if you start at track one and listen to the entire cd.
I would tend to agree that cutting down a sick or dying tree is in general, a good idea. Certainly, it is not a bad one. However, I have never heard of a logging operation that cuts down only sick trees. Have you? It would simply not be profitable, practical, realistic, etc...I'm not going to comment on the ethicity of clear cutting or slaughtering cows, as I have mixed feelings about these subjects which would take pages to explain. Having said that, however, I feel I must disagree with "in many cases logging actually saves the forest." Like I said, no logging operation harvests trees by taking only the sick and dying ones. Sure, it might save some trees if they did. But this is irrelevent when the "saved" trees are removed the next day. Besides, if you really want to get technical about it, one could argue that by taking any trees, including a sick one, you are screwing with the natural order of things (evolution, food chain, etc). Please note though, I would not be one to make that argument.:)
I agree, the human eye can definatly see greater than 30fps. In movies when the camera pans, I almost always notice the frame rate, especially in a theatre, but I often notice at home too. In fact, I sometimes experience eyestrain/headaches in movies with repeated panning shots. There is another point to consider as well though. Benchmarks tell the user the *average* framerate. As you can imagine, a frame rate of 60fps in say, quake, may peak at 100fps in a small room and drop to 20fps during a heated battle. Any gamer will tell you that 20fps is simply too slow for real accuracy. So, there is reason to buy a new card with an average fps of 100, since it may only only drop to 40fps in the same circumstances.
Yes, LCD projection devices are very expensive. But, as far as very large screens are concerned, they are MUCH cheaper than a very large tube TV. I know for a fact many arcade games use projection screens. Some even use a "wraparound" semi-circcular screen. Try doing that with a tube. Ever compared the prices of say, a 36" projection TV to the cost of a 36" tube model? Not only that, but I'm prety sure not all projection tvs use LCD technology. They've been around for ages, and I think the cheaper ones use somewhat older tech.
I have noticed that even the newest arcade games that use a projection display still have this problem. If you go to the arcade you will see some games only 6 months to a year old that are already starting to show signs of burn-in. Maybe the average consumer projection TV is of higher quality, however, I wouldn't count on that.
I can think of two reasons: 1. The average Joe becomes frightened when someone tells him "people can see your files." 2. An obvious use would be for piracy. Since napster will ultimatly be advertisement driven, this could pose a problem. Many of napster's sponsers would presumably be software companies. They are not going to pay to advertise in a community where their software is readily available for free in it's full form.
Slashdot Mirror
This is beyond niche and solved by access policy. What OP is describing only describes a way to make a weird, less secure (more attack surface area) edge case for the IT department to deal with.
I doubt this will happen, since time and again, Paul's definition of freedom in this case is freedom for the ISPs to do whatever they want. Net neutrality requires regulation, but what will actually happen under this type of plan is deregulation.
We got a great big convoy...
rainlendar. google it. lots of features, and syncs to a server if you wish for multiple computers and other apps.
I hate this argument. Yes, it would be nice if more people were to help solve our problems, but it's unreasonable to expect that everybody focuses thier attention on that. Besides, who's to say that this technology isn't adapted successfully for wheelchairs?
In most games, there is a quick load /quick save feature. For some reason, F4 and F5 seem to be common default keys for this. Anyways, I always use the feature, and save normally only occasionally, in case I want to start a level over, for example.
I watched tons of TV, and I can say that not only did it not.....
OOOH! Shiny......
A few suggestions:
1) Use a fine grit sand paper to clean the contacts on the games as well as the pin connector
2)(This is for other readers, I guess). You don't need to buy a new connector. Take your nes apart, and use a small screwdriver to pry all the pins up slightly.
3) Use a game genie. It's a tighter fit, and usually solves the problem (you don't have to use the codes if you don't want to). This might be a good solution for you since you can leave it plugged into the nes always, instead of pulling out your pin connector trying to remove it. It's ugly because it sticks out though
4) Find one of those rare top-loading nes machines.
5) Find one of those ultra-rare arcade nes machines
It's been done: Soniqcast Aerio (for you) Omnifi (for your car)
No, the article said degrees.
What's a joke?
There is no such thing as a degree Kelvin. They are simply kelvins. Also, there is no such thing as a negative kelvin. The kelvin scale starts at 0.
Times New Roman is a serif font.
--
--
--
--
--
--
--
--
--
Yes, LCD projection devices are very expensive. But, as far as very large screens are concerned, they are MUCH cheaper than a very large tube TV. I know for a fact many arcade games use projection screens. Some even use a "wraparound" semi-circcular screen. Try doing that with a tube. Ever compared the prices of say, a 36" projection TV to the cost of a 36" tube model? Not only that, but I'm prety sure not all projection tvs use LCD technology. They've been around for ages, and I think the cheaper ones use somewhat older tech.
--
--
--
--