Slashdot Mirror

MojoKid quotes a report from HotHardware: The OLO 3D Printer was first announced in October at the World Maker Faire in New York, where it earned itself an Editor's Choice award and accolades. The developers behind OLO call it a "smartphone 3D printer" as it requires a smartphone to operate. Designs can either be downloaded from the internet from the device, or copied over from a computer once it's created. When placed on a desk, the OLO looks like an inconspicuous little box, but inside, it can craft items up to 400 cm3 in volume. Its developers call the OLO "portable," and it has the specs to match at 1.7 lbs with a physical size of only 6.8" x 4.5" x 5.8." OLO is a unique printer not only because of its small form factor and low price point ($99), but because of its operation. Once the 3D model is loaded, the bottom section of OLO can be placed on top of your phone, and then the resin of your choice is poured inside that structure. You then place the top half of OLO on top and wait a few hours for it to do its thing. The resin hardens by using the light emitted from the smartphone it sits on top of, generated from the OLO app.

Here's another one Tim spotted at Maker Faire Bay Area 2014: A Rubik's Cube solver made by 12-year-old Saurabh Narain. He's in 7th grade -- and started soldering in 2nd grade and messing with Linux in 3rd grade. "What do you want to be when you grow up?" Tim asked. "An engineer..." (not that you couldn't have guessed). There may be faster Rubik's Cube solvers, and there may be slicker-looking ones, but Saurabh's is a lot more elegant, if you define engineering elegance as getting the most accomplished with the fewest possible parts, using the simplest possible design. And both of the fancier Rubik's Cuber solvers linked to in this paragraph were made by adult engineers, while Saurabh is 12. Can you imagine what he'll be like at 18? Or 28? Not that he's alone; there are lots of other engineering prodigies out there. The next 10 or 20 years are going to be amazing if we encourage young people to go into STEM, and even 5% of them are as smart as Saurabh. (Alternate Video Link)

Not everybody at a Maker Fair (or even Faire) is there to get kickstarted or to make a billion of whatever it is they're displaying. Ned Danyliw is one of the non-kickstarter people: an electrical engineering student displaying a quadcopter development platform he hopes can bring the cost of a quadcopter prototype down to $50 or so, or about the same price as a toy quadcopter. You can follow Ned's work step by step and see all the code at his blog, Burnt Transistors. (Alternate Video Link)

25-year electronics veteran Conrad Lee noticed that commodity multi-channel security DVRs have both more channels than a typical household needs and more capabilities than their makers advertise -- at least, with some creative re-use of their video feeds. With a home-grown controller hooked up to an otherwise unused video channel, a run of the mill security DVR can be used as a command center for household items, like lights, locks, thermostats, cameras, or whatever else you think of) by means of controls both old-fashioned (the ubiquitous X10 devices, some of which you probably have stashed in a drawer) and new (Z-wave). He showed off his system at last month's Maker Faire -- take a look (video below) at what his clever hardware re-use makes possible, and at Lee's controller. It means giving up one (relatively) inexpensive channel, to gain capabilities that would cost quite a bit more in a ready-built system, like smart-phone control and pan/tilt control for cameras. (Alternate Video Link)

Last month, at Maker Faire Bay Area 2014, Timothy Lord spotted a guy wearing a very large piece of headgear that included two crossed wrenches. The guy turned out to be Mike Szczys, Managing Editor of hackaday.com, which says, "The Hackaday Prize will send one person into space for building the next evolution of hardware." That's certainly of interest to the hardware hacker/maker crowd. How they're going to arrange the space flight (probably one of those "just above the atmosphere" hops) isn't specified, but even so the contest is an interesting idea, and the Hack A Day site seems to have some interest hacks and tutorials on it. So go ahead and enter the contest -- and don't forget to take your camera with you on your flight into space, because we'll want to see pictures! (Alternate Video Link)

This is something that caught Tim Lord's eye as he cruised the 2014 Bay Area Maker Faire: A 360 4K-resolution video camera. It's not out yet for retail sale, but if you look at the Centrcam website you can see a number of videos their cameras have shot, including some high-motion ones that they say, truthfully, are excellent to watch full-screen. The people who came up with this aren't college students who have never done any professional design work. Rather, they're "the same team that engineered and built the Apple iPhone cameras." So it's no wonder they have made something pretty cool that has already been used to make videos for Fox Sports, National Geographic, and the U.S. Army, among others. Their Kickstarter blurb is pretty cool, too. It is one of the most detailed ones we've ever seen. It's sad that they only got $607,628 of their $900,000 funding goal, considering all the work they've put into their product, along with the great presentation. They didn't know this would happen at the time this video was shot at the Maker Faire; their Kickstarter time window didn't close until four days ago. But there are other ways to fund a startup, and we hope they manage find one -- because we would eventually like to get our hands on one of their cameras and test it for ourselves, possibly with a little help from some of the Bradenton Riverwalk Skatepark regulars. (Alternate Video Link)

Meet David. Tim Lord ran into him at the 2014 Maker Faire Bay Area. He didn't have a display, and he wasn't obviously trying to sell anything or promote a Kickstarter campaign. He was just walking around with a panel full of LEDs that he wears as a backpack while riding his bike, which beats the heck out of regular bike taillights, even the blinky flashy ones a lot of us have these days. So good on you, David. This is your three minutes of Slashdot fame -- and please note, people, that you can now fast-forward through any preroll ads longer than 30 seconds, so you won't get bombed with multi-minute ads to watch a three minute Slashdot video. (Alternate video link)

There are Maker Faires all over the world, but this video was made at the one held in Ann Arbor this June. It's a random selection of demos given by people Slashdot editors met while cruising the exhibits. Want to have your own Maker Faire? Make Magazine has instructions on how to make a Maker Faire if there isn't already one near you.

SWroclawski writes "Well known hacker and hackerspace advocate Mitch Altman has decided to temporarily part ways with Maker Faire over their involvement with DARPA (as reported on Twitter and Facebook). This public parting of ways raises the question of what role government, especially the military, should play in working alongside hackers and educators."

As a nexus of both computer programmers and other creative builder and maker types, SXSW (and Austin generally) is a great place to witness the overlap. John Zitterkopf and his pal Red, while helping to run the giant (and charitable!) LANFest at this year's event, had on hand for display a few of their own modded computer cases. John and Red are both part of Austin Modders, which helps Austinites swap tools and ideas (in-person, and via forums) for creating the kind of enclosures that computer makers simply can't — they're too time-intensive and too personalized for that. It's especially fun to see the effects that the newly widespread availability of laser cutters makes possible. (C'mon, O'Reilly, isn't it time for another Austin Maker Faire?)

ptorrone writes "A group of open source hardware makers have put together a draft of the open source hardware definition, now at version 0.3, which hopes to further define the making, sharing and selling of hardware within an 'Open Source Hardware license.' This fall, the day before Maker Faire New York City, the group hopes to have the license finalized for v1.0, and they are holding the first Open Source Hardware Summit. There are currently dozens of companies making open source hardware, altogether worth millions of dollars."

krou writes "The BBC covered the most recent Newcastle Maker Faire, an event which Slashdot first covered last year. From racing power tools, to making music using electric sparks, or a robot that solves the Rubik's Cube in 20 seconds, makers, crafters and hackers were out in force. YouTube has a selection of videos available, and there are some pics on Flickr. And, while it may not be a hover board, there was a self-balancing skateboard."

California has once again been blessed with another steampunk convention, this time to be held in Emeryville, CA on March 12-14 as the "Nova Albion Steampunk Exhibition." This year's event promises to mix in much more of the DIY/maker flavor for a greater hands-on feel. Steampunk has been gaining much broader appeal in recent months with the continued growth of maker communities, and the many delightful varieties of music and literature. The con will feature, among other things, a 2 day track of 2-hour how-to, hands-on, and interactive workshops gear towards makers, DIY-ers, mad scientists, and evil geniuses. Of course, if you are an evil genius you probably don't need a workshop except as a gathering for potential test subjects.

krou writes "The BBC is reporting on the first Maker Faire in the UK, in Newcastle. The event saw an incredible gathering of tech DIY enthusiasts showing off their robotic wares. Maker Faire is firmly established in the US; the 4th annual running in the Bay Area begins on May 30. The BBC video shows the fire-breathing horse, Rusty, and Titan, an eight-foot tall fully-animated robot that likes scaring kids. Elsewhere, the Faire also had Ian Sharp's physical realization of the Lunar Lander computer game, low-cost multi-touch displays, and one of the oldest-ever case mods, made by veteran computer enthusiast John Honnibal, who also showed off his old over-clocked kit computer. Pictures from the Faire are also on Flickr, and videos on YouTube."