Flat Panel Linux Box for $99?

A reader writes "Found an interesting site which describes a hack to modify the $99 Iopener internet appliance to be able to run Linux. Flat panel LCD display, small footprint, 56K (non-win)modem. No ethernet, but a built-in parallel port (for PLIP?). Just add 2.5" HD. The perfect X terminal! "

Comments

Re:What is the legality behind this?

[stripes]

I know that alot of people here think the EULAs are junk, but in reality some of them are legitimate. Although I think this is very cool, isn't this a blatant misuse of their device. I assume that there is somewhere where they say you can't disassemble them, and in this case, where they are selling them at a loss, they have a legitimate reason to request this.

I don't think they did, and the EULA wouldn't be needed. All they need is a cell-phone like contract when you buy that you sign up for X months of their $20 service, or pay a sliding termination fee. Which as far as I know they don't (yet) require.

Those contracts are enforcable (since you sign them when you buy the product, not "click" them after). And in my opnion they are also fair since you know the terms before you get home. That's the thing I hate about the EULA. You can buy a product and when you get home discover that there are all sorts of restrictions on it. I want to know what I'm buying before I put my money down. I don't want to get home and then decide I have to drive back to the damm store and return it.

The downside (from netpliance's point of view) is people don't like to make that kind of commitment. Just look at how many more people sign up for the no/low commit moble phones now vs. about five years ago when there were no low commit (let alone no commit) phone plans!

On a second note, what are the terms of their contract. Assuming you are buying the product, and not just on an indefinate lease, how long are you required to use their internet service before terminating the contract?

From what I have read here, there is none. Even if there was one this would be nice because it means there would be a use for this $99 box even if netpliance went bankrupt (and face it, this kind of market is really rough, they have to compete with $0 PCs offering the same kind of deal, but with a 2 to 4 year ISP commitment).

clear up some questions on my iopener hack

[linux-hacker]

the screen is the new sharp dualscan 800x600 16bpp you can fdisk and format the internal flash disk it will boot off the flash disk if there is no hard drive plugged in.. and you can replace the kb it just uses a ps2 plug thats how you get into setup ctl+alt+esc ! i use a dlink de620 par either net adapter and it works well.. the cpu does about 80 bogomips i swaped the winchip whith a itel 200 pre mmx 3.4v core and bogomips when about 3x i will update the page and fix the forum tonight thanks for the ./ codeman

Wireless LCD screen Linux terminal for $200

[TurkishGeek]

I'm glad this became an article today. I was one of the posters who suggested this should be an article yesterday, on Microsoft X-box thread.

My plan is to hack one into a wireless LCD screen Linux system for less than $200. I believe this can be done, but I will need some help. Here is the known specs:

• The box uses a Winchip 180MHz processor.
  
• The chipset consists of Trident Cyberglade i7, which is a mobile version of VIA's MVP4 northbridge + integrated UMA video chip. It's fully supported by XFree86, and the person who hacked the i-opener first was kind enough to email me the Xconfig file. The other component of the chipset is a VIA southbridge. The northbridge has the PCI bus interface, and the southbridge has an ISA bus.
  
• The modem is an add-on daughterboard, and sits on an interface that nobody has been able to identify yet. If I were one of the engineers of i-opener, I would have used the ISA bus along with a PC/104 type connector. I haven't seen the board myself yet, but I'm hoping it is either some kind of custom connector for the ISA bus, or PC/104, or some kind of PCMCIA connector.
  
• If the modem is really on an ISA bus, the modem daughterboard can be removed, and an ISA PCMCIA adapter card can be connected here with the help of a custom cable assembly/an ISA slot from an old motherboard. My plan is to use the card that comes with the Webgear Aviator 2.4 IEEE 802.11 wireless LAN kit. Then you can plug any PCMCIA card to this adapter, Ethernet, your choice of a IEEE 802.11 wireless LAN card, etc. (I recommend the $70 Aviator 2.4)
  
• If the modem is connected to a PCMCIA connector(which doesn't make any sense really-the ISA bus is already there, and if they really wanted ISA extensibility, why didn't they just add a proper PCMCIA connector?); then provided that the PCMCIA controller is supported by Linux, it should be easy to connect your choice of PCMCIA card there.
  
  Will anyone who has seen the actual board, or who knows anything about it, please comment on my idea? If anyone can identify the connection of the modem daughterboard to the motherboard, it's even better. Some people suggested that it was PCMCIA, in this case, does anyone know which PCMCIA controller is used?
  
  If this can be done, and we have access to the ISA bus or a PCMCIA connector on the i-opener, possibilities are endless. The i-opener has barely enough space inside to house a small ISA card with the metal bracket removed. With an ISA Ethernet board with a boot ROM, you can build a diskless X terminal; or you can try adding a wireless LAN card like me.
  
  If I can pull this off, I will post it as an article on my Bluetooth Central to share.

--

BluetoothCentral.com
A site for everything Bluetooth. Coming soon.

Re:Linux flatscreen for $99-- NOPE!

[gleam]

I priced the components earlier (I'm very intrigued by the possibility) and a 2 gig 2.5" IDE hard drive is $72. That's an IBM hdd, too, so it's likely quite good quality. A USB ethernet card is approx $30 for the low end ones, but I didn't check for supported ones. My guess is that the low end ones are the supported ones.

So we have now a whopping $200, which is what the unit cost originally. So while it's twice the price, it's still undeniably nifty.

Somewhere below (above?) someone mentioned a parallel port ethernet card which is also supported under linux. That, however, costs around $75 or $100, so now we're in the 275$ range.

Not nearly $350-400, though. And $275 (or even better, $200) is a fabulous deal for a tiny little terminal.

-Ed