Slashdot Mirror
3D MAX To Laser Light
Laserfuzz writes: "Remember LaserMAME?
Well this isn't new but Pangolin has a plug-in
for 3D
Studio MAX to convert 3D objects and scenes into laser outlines. Opens laser
show programing to a larger group of people." I s'pose not everyone has that kind of hardware sitting around, but you sure could light up a party.
Ah, Las Vegas... home to every convention known to man -- except, apparently, for the Geneva Convention.
I never found any true use for them. I guess if you were at any show and under the incredible influence of LSD then this would be enjoyable.
.02
At any other show I find them to be terribly annoying and distracting from the performers on stage.
Why would I want even more tacked onto the cost of a ticket (TM, band fees are enough) just to see a bunch of shit that I can see while watching GForce for free.
Just my worthless
Make that with a capital "E"!
Cheap galvs are going set you back at least $100.00 per channel (last time I checked) - and those aren't high speed, either (lotsa bucks for those). Pro laser show equipment is pricey - but it doesn't have to be this way for your next party.
In an old back issue of Scientific American (in the late 70's-early 80's, I believe) there was an Amatuer Scientist article on building your own laser show cheaply - where the "galvs" were right angle/ortho mounted speakers with mirrors glued to the cone - the trick is using two mirror/speaker combos, each acting on the X or Y axis. The laser bounces between them, and the speakers control the deflection in the X and Y axis - tone generators control the speakers.
The article also showed how to use two motors, each with a mirror glued to the shaft at an angle - using this arrangement, bouncing the laser between the mirrors, you can create lissajous patterns (fun to watch - I actually put an entry into the AOL CD contest that did this, but used the CDs as the mirrors). Add a motor spinning a "shutter" wheel (prior to the laser hitting the first mirror) for other effects. All the motors are controlled with rheostats.
Other possibilities:
Cut away the speaker cone to reduce its mass to get higher speed. It might also be possible to extend the shaft of a regular analogue voltmeter and superglue a small mirror onto it (might have to beef up the spring a bit). Use a solenoid to activate a shutter "digitally" (pro rigs use some kind of electro-optical shutter that works similarly to an LCD). I have given thought to using headphone style speakers, or gluing the mirror to a piezo speaker for higher speeds - haven't followed through on it yet, though.
Use a PC (and accompaning sound card) to control the speaker "galvs" - the parallel port could control a solenoid shutter. Multiple shutters could be controlled serially. Mirrors could be mounted on servos for simple "sweep" effects.
Buy the small mirrors at a craft store - they make them pretty small and lightweight. Another possibility for even lighterweight mirrors is to use a small piece of highly polished blank semiconductor wafer.
Pen lasers (ie, LED lasers) can be used for small informal gatherings, but if you want to do a better, larger show, get an HeNe tube laser - output and brightness tends to be higher. Unfortunately you won't be able to get other colors without spending a lot of bucks (I think there is a blue or green laser pen out there, but it is expensive - other colored lasers are of the gas variety, and tend to be expensive). But other light effects could be used instead (maybe focused high-brightness LEDs?)...
Have phun!
Worldcom - Generation Duh!
Reason is the Path to God - Anon
No, no:
It's all fun and games until someone loses an eye.
Then, it's just a game: Find the Eye.
"Destroy science and religion. Science would re-emerge exactly the same; but not religion." - Penn Jillette, paraphrased
And for a good reason...
"Up there! It's a bird!"
"It's a plane!"
"IT'S A TEAPOT!!!!"
Tell me what makes you so afraid
Of all those people you say you hate
Well, here we are in the future - wheres my jet-pack? ..
This reminds me a bit of a program I had way back when on my Amiga 2000 that would output audio signals to create patterns with a laser scanner. By far the simpler and cheaper route to go is to get yourself a cheap surplus laser and clue a non-flat mirror to a motor shaft.. By playing around with the angle of the mirror you can adjust the projected pattern.. Not nearly as high-tech, but cheap and cheerful for the party wall..
air and light and time and space
you can get a scanner for between $300 & $500. Note that this does NOT include the laser or the chassis, which can run you MUCH MUCH more depending on the laser power. IF you already have a cheep laser, you can rig up one of these on a homemade chassis and use it with software like the one in this story.
http://www.camtech.com/
www.gsilumonics.com
other sources and info from this page.
air and light and time and space
no but really, why do "copy and paste the links" posts still get modded up? have we not evolved people
NEWS: cloning, genome, privacy, surveillance, and more!
NEWS: cloning, genome, privacy, surveillance, and more!
Oddly enough, the college Clinic project I worked on last year was an attempt to convert a picture of a two-dimensional pattern to a laser pattern. I can't be too specific since the patent application is still being processed, but you can see a very brief project statement at HMC's Clinic Page (look under Oregon Medical Laser Center) Our main problem was in eliminating distortion, as we were on a limited budget and had to buy a consumer digital camera to take pictures of our sample. Also, none of us had had experience with image processing, so it was a bit of a pain. This plugin seems like it could be very useful for those in the laser marking business, as they won't have to draw extremely complicated 3D objects themselves in order to get the pattern they want to mark -- but they would need to have a 3D model of it.
I can picture Taco at a party with his laser light show machine having an exchange something like this:
Taco: When an electron drops from an outer to an inner level, excess energy is given off as light. The wavelength or color of the emitted light is precisely related to the amount of energy released.
Cute Girl: Eh!
Taco: Yes...what is it, what, what is it?
Cute Girl: Can I play with it?
Taco: No you can't play with it. You won't enjoy it on as many levels as I do... The colors!
From hell's heart I fstab at /dev/hdc
Anybody ever been to Stone Mountain in Atlanta, GA? They run the same show every night for months at a time, I bet they'd love some software like this to spice up the act relatively inexpensively.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~ now you know
I have a friend who made a laser light show for a 4th of July festival. He had a heck of a time getting the colors to come out right. Apparently, there are some severe restrictions in the US with regard to laser intensity at various colors. He had to get a special permit to display his show in a public forum. You can find out about the standards here.
Now, this is some very cool stuff. I've actually seen him make holograms using his laser projector. But if you want to do anything out in public, you'll need to be sure you have the right papers.
I dont understand how this would be useful? Sure this software costs like 11,000000 but still, why would anyone want to SIMULATE lasers. It loses all the stuff i like lasers for.
Some people tell me I am sleeping my life away, I simply tell them I am living my dreams.
LightWave, Maya, and good old POV-RAY. This is nothing terribly new, but it's nice to see that someone has taken the time to put together a plug in for 3DMAX, which is one of the most used (aka most pirated) pieces of 3D software out there.
By the way
Unfortunately, the De Anza planetarium has cancelled all laser shows at the Minolta planetarium until further notice. It was one of the last good places to see the Pink Floyd laser show.
"Don't worry about the problems you have in mathematics, I assure you mine are much greater." - Einstein c.1919
The Laserist Marketplace
Cosmic Ray
Spectra Physics
"Don't worry about the problems you have in mathematics, I assure you mine are much greater." - Einstein c.1919