Slashdot Mirror
Building Custom Rackmount Systems?
Jobe_br asks: "I've spent the past few days scouring the web, trying to put together a custom 1U system that I don't want to cost a lot (starting out), but that should be quite expandable. The 1U system I've looked at and would most like to emulate is the 1U dual processor AMD system from Einux. I've looked around and can't seem to even get close to what they're able to pack into this 1U system. My price point goal is $700 for the base system (1 Athlon MP 1GHz or more, 128MB DDR SDRAM, 1 10/100 NIC, 1 3.5" IDE drive 10G or more) and I'd like the system to be able to handle another Athlon MP, at least 1GB DDR SDRAM, up to 4 10/100 network ports, and at least 2 3.5" IDE drives. As more hardware becomes necessary, price won't be an issue, but initially, I need to stay within $700! Does the custom building Slashdot crowd have any advice?"
For a 1U chassis, you're really restricted in your options. You may be able to fit a single PCI add-on card in somehow (IIRC, there are 90-degree adapters for PCI risers, half inch and 1 inch heights) Everything else would have to be integrated on the motherboard. The Tyan Athlon-MP motherboard offers two 100-Base-TX Ethernet ports, built-in 8MB AGP 3D video, SCSI and IDE, several GB of ram in slanted slots, 8 fan headers, and 64-bit PCI slots. You'd probably be able to use one of them with a 90-degree riser.
Other than that, you're pretty much out of luck. A 2U isn't that much bigger, and you can fit a lot more into it.
You can buy 1U rackmount chassis at General Technics. I'd suggest just buying the chassis from them, and going elsewhere for motherboard, RAM, disk, etc. They appear to be a little pricey on those. Even at $250 for the case (w/ 200W PS) you should easily be able to put together your base system. It takes standard ATX mobo's, just make sure you get low profile RAM and CPU fan(s).
Also, most 1U systems are limited to a single PCI card, but Intel has a 4-port PCI ethernet adapter that would work well for expansion. Don't have a link handy, but you should be able to google it easily enough.
Those irresponsible excuses for journalists at adequacy give false and misleading information on building a PC, simply to increase their page hits. They seem to think that any old Joe Sixpack can build a PC like lego.
I hate those idiots so much. They call themselves adequacy, but I prefer to use Linux King's appropriate nickname, and call them INadequacy.org
I'd like to build an 8-way xeon server with 64 gigs of RAM and stay within a $900 budget, but it ain't gonna happen.
First off, you want "1U" and "exapandable," which are inherently opposites. 1Us tend to be somewhat custom in design (NOT easy to build yourself from spare parts), and they carry a price premium. I really doubt you could hit that price point (with any level of quality at all) even if you dropped the 1U requirement. For a dual-AMD, Einux's cases alone run over $700!
So, step back and think about what you really need for this application. Why expandability in such a cheap system? By the time you get around to adding another CPU and disk, it might be more cost effective to build a new 1-CPU box from scratch. I would probably go with a single PII at around 933 mHz. Even then, $700 for a 1U will be hard to reach. You probably want to scour Ubid.com and eBay for failed-dot-com loot...
Good luck,
--JRZ