First Benchmarks of AMD Hammer Prototype

porciletto writes "As seen on Ace's Hardware, this article features Quake 3 benchmarks comparing an 800 MHz ClawHammer sample to Athlon MPs at 800 MHz and 1667 MHz, as well as a Willamette Pentium 4 (256 KB L2, 400 MHz FSB) at 800 MHz and 1600 MHz. The benchmark results indicate a 40% performance increase over an Athlon MP for the ClawHammer. Additionally, the 800 MHz ClawHammer manages to tie (actually outperform by 1 FPS) the 1667 MHz Willamette Pentium 4."

Comments

It would be more interesting if...

[xiox]

They tested some software which had been compiled for 64 bit mode. With the large number of 64 bit registers the hammer has there should be some significant speed improvement.

Amazing performance from a clock-limited proto

[Thagg]

If you manage to get through the slashdotting, the story in the tecchannel web pages is amazing. The prototype Clawhammer, while limited to 800 MHz, performed shockingly well on the few, but varied, benchmarks they subjected it to. It's interesting that both Intel and AMD teach the same lesson, that MHz doesn't determine performance. Unfortunately for Intel, they demonstrate it by the P4 not running as fast as the MHz would imply, where the AMD chips run far faster than MHz would imply.

I can't wait for these chips to get out there.

thad

Re:1667?

[Jugalator]

you've got to wonder what intel isn't doing to optimize.

FYI, we had a teacher in a processor architecture course that worked with optimizing algorithms and had worked for Intel. He left and started working for AMD instead. He openly said that Intel sucked. Guess what PR that gives when it's from the mouth of an insightful teacher. :)

So they must do something wrong over there. :) At least in the eyes of some optimizing guys. heh

why i cheer amd

[Indy1]

Quick background:

I am a long time system designer /upgrader / hardware IT geek. I've been working on Amd /Intel boxes since the 386 days. One reason why I cheer for Amd is that in the past few years, Intel seems bent on dragging all of us back into the 286 days of hardware being propeirty. Slot 1, Rdram memory interfaces, etc. Amd seems to have more of a commitment to sticking to industry standards, like (at the time) socket 7, sdram, ddr, etc.

Another reason why i tend to prefer Amd is the cynical marketing processor known as the P-4. The vast majority of benchmarks show that unless your running software thats heavily SSE-2 optimized, the Athlon's spank the P-4. Yet the P-4's are much more $$$$ due to all those wonderful Intel commercials with dancing morons in bunny suits, or some smucks painted up like a martian with a bad head cold. Instend of wasting all that money marketing, use it to improve your designs! Amd spends virtually nothing on marketing, and yet whenever they have a good design, their products sell extremely well. And dont get me started on intel's late ddr support, or the earily 845 chipsets that were sdram only, which had PATHETIC performace.

I guess the point of my whole rant is......I use Intel or Amd, or whoever, as long as they give me a good value for my (or my customer's) dollar. Give me a nice industry standard design. Dont foist some new marketing propierty design on me. If its gotta be propierty, it better be for one of two reasons: Considerably cheaper, or considerably faster. Intel in the past few years has NOT focused on giving the customer value. Amd has. Give me a 1000 dollars, and I can build either an Intel box, or an Amd box thats 20% faster then the Intel box, and just as stable. (I dont buy the Amd isnt stable arguement, it all comes down to knowing your hardware and how to configure it properly for stable operation.)

When Intel returns to delivering a product that is worth the price Intel charges for it, I'll use Intel again. Until then, I'll continue to laugh at ridiculous marketing schemes and do my research on which product is the fastest for the least money.