Slashdot Mirror

← Back to Stories (view on slashdot.org)

Hot-Rod Your CD-RW Drive

Posted by timothy on from the or-is-it-april-already dept.

Anonymous Coward writes: "Currently almost everyone with a computer has a CD-ROM drive and also a big part of them have a CD-RW drive. But what if you want to spend less time on writing a CD-R ? You have to buy a new one, or, if you are a real geek, you just overclock it! Seems to be to good to be true ? It's not! Currently a lot of cheap manufacturers of CD-RW drives are using the same parts in their 32x,40x, and 48x drives and start to sell them at 32x, later to 40x and in end as 48x. and with a little upgrading of the firmware (totally legal) you will have a faster drive, because you remove its limits! It currently works on drives from Lite-On (who also makes drives for Memorex, TDK, Iomega, Cendyne, TraxData and Pacific digital all overclockable) And the list goes on as there are also overclock tricks for LG (32x -> 40x) and Sony drives (32x -> 48x). If you don't believe it, read all the reactions and the postings on the forums mentioned above!"

4 of 285 comments (clear)

  1. old news...... by H3XA · · Score: 5, Informative

    another source of info

    http://www.cdrinfo.com/Sections/Articles/Specific. asp?ArticleHeadline=Overclocking&Series=0

    with mods for -
    AOPEN
    HP
    Iomega
    LG
    Lite-On
    Plextor
    Ricoh
    Sony
    TraxData

    - HeXa

  2. Big deal by asavage · · Score: 5, Informative

    The difference between burning at 40 to 48 speeds is about 20 seconds. Some of us still have to use crappy 4 speed burners. Also a lot of CD media isn't even compatable at those speeds anyway.

  3. Re:ahh crap by jonnythan · · Score: 5, Informative

    You paid $80 to save about 20 seconds recording a cd? Is your time really worth $14,400/hr?

  4. Well.... is it really worth it? by hashinclude · · Score: 5, Informative
    These are the stats I have on my machine (p3-733, 512MB ram, IDE-100)

    1x - 1 hr 10 mins (total, yes I have had one)
    2x - 40 mins (actually something like 38)
    4x - 19-20 mins
    12x - 7 mins
    24x - 5 mins
    32x - 4:30 mins
    40x - ? (haven't upgraded my drive yet :P )

    My point being that as things are right now, IDE hard drives are not quite fast enough even with an 8MB buffer to keep up with the data transfer required (and yes, I am running my 7200 Maxtor 27GB as Primary master, and LG 32X CD-RW as Secondary Master on an Intel 815EEA2 board)

    How does overclocking (and possibly destroying the drive mechanism, though rare) really help me burn CD faster? Current software / hardware configs give me no better than 4:30 mins .. (while the 24x gives ~5:20)

    I think this is something like the 52x and 60x and 72x CDROM, where the number behind the X stands for MAX ... meaning that with optimal (ideal?) parameters, the drive gives 72x (1x = 150kbps)

    I'd much rather stick with my * unmodified * 32x drive, thanks.

    --
    US is now divided as the "Red" and "blue" states. Red States = communist countries. Coincidence? I think not