Slashdot Mirror
Managing RAID on Linux
A person deciding to go with RAID faces a panoply of options and gotchas. Hardware or software? How many controllers? ATA or SCSI (or ataraid)? RAID 1 or RAID 5? Which file system or distribution? Kernel options? Mdadm or raidtools? /swap or /boot on raid? Hybrid? Left or right symmetric? One poster pointed out that putting two ATA drives on the same controller could impact performance. Yikes! Didn't I do that? Upon discovering that O'Reilly had just published its Managing RAID on Linux book, looking at sample chapter , I bought the book and let my blood pressure return to normal.
RAID is one of these subjects that is really not complex; it's just very hard to find all the information in one place. This is precisely the book to solve the problem. Author Derek Vadala, sysadmin and founder of Azurance.com, an open source/security consulting firm, has gathered a lot of information and even personal anecdotes to go through the decision making process when going over to RAID. He goes step-by-step through that process, educating us about hard drives, controllers, and bottlenecks along the way. This exhaustive book may be the first to bring RAID to the masses.
Although parts of the book (RAID types, file system types) may seem already familiar to experienced Linux users, it is helpful nonetheless to have everything in a nifty little book. A section of file systems provided not only a rundown of the merits and drawbacks of each one, but also a guide to their utilities. I learned for example what "file tails" for Reiser are, and why using them causes performance to degrade after reaching 85% capacity. The book compares raidtools with mdadm as well as lovely commands like nohup mdadm -monitor -mail=paranoidsysadmin@home.com (which, if you haven't guessed, causes the system to email you RAID status reports upon boot).
People who use software RAID may skip over the chapter on RAID utilities for the leading RAID controller cards. Still, there was one interesting tidbit: Why, the author asks, do makers of controller cards put all their BIOS utilities on DOS floppies which require us to find a DOS boot disk? Seriously, how many of us carry around DOS boot disks nowadays? The book made me aware for the first time of freedos, an open source solution that solves precisely that problem.
The Software RAID stuff was pretty thorough and clarified a lot of things. The book does an excellent job in helping to identify and eliminate bottlenecks and optimizing hard drive performance (using hdparm and various monitoring commands). The anecdotes and case studies definitely clarified which RAID solution is suited for which task.
I am less impressed by the book's sections on disaster recovery and troubleshooting. Although these subjects are brought up at several places in the software RAID chapter, the book could have discussed several failure scenarios or used a fault tree (such as the famous Fault Tree in Chapter 9 of the Samba book, a marvel for any tech writer to read). The book doesn't even discuss booting with software RAID until the last 10 page of the book and then gives it only a single paragraph (even though the author acknowledges it as "one of the most frequently asked questions on the linux-raid mailing list."). Call me old-fashioned, but isn't the ability to boot into your RAID system ... kinda important? As someone who just spent a significant amount of time troubleshooting RAID booting problems in Gentoo, I for one would have liked more insight into the grub/lilo thing. Also, in the next paragraph in the last chapter on page 228, the author casually mentions that "all /boot and / partitions must be on a RAID-1." Say what? Please pity the poor newbie who religiously follows the instructions in the book but fails to read until the end. I'm not sure what the author meant by this statement, but it required a much more substantial explanation and needed to go into a much earlier chapter.
These complaints don't detract very much from this excellent book, a true O'Reilly classic and a model of clarity and helpfulness. This book provides enough knowledge to avoid the dread and uncertainty that comes with trying to tackle Linux RAID. With a book like this, a sysadmin can sleep a little easier.
Recommended Readings:- Reliable Linux , by Iaian Campbell, Wiley and Sons, Dec 2001, ISBN: 0471070408. Gives excellent information not only about RAID but on general Linux reliability issues.
- Software RAID in the Linux 2.4 Kernel by Daniel Robbins. (Part Two).
- Linux Journal Article on Software RAID by Joe Edwards, Audin Malmin and Ron Shaker. ( Part Two).
- "How to do a gentoo install on software RAID" by Chris Atwood. Gentoo User Forum.
Robert Nagle (aka Idiotprogrammer )is a Texas technical writer, trainer and Linux aficionado. You can purchase Managing RAID on Linux from bn.com. Slashdot welcomes readers' book reviews -- to see your own review here, read the book review guidelines, then visit the submission page.
but the easiest way I've found is to go with hardware RAID. It's easier to setup, doesn't put any extra load on the CPU, and only costs a few hundred dollars extra.
Mind you I'm thinking of RAID used in producion instead of someone RAIDing two drives in there home machine.
Is it possible to use Firewire and a service like Rendevous to make an intelligent redundant system? It's a thought at least. My firewire drive I use for my Inspiron works nicely enough. Would firewire be cheaper than RAID for servers, however?
Syr GameTab.com - Game Reviews Database
I've stepped away from the software RAID idea on my boxes, due to the availability of cheap hardware RAID, such as Promise's SX4000. It will do hardware RAID 5 for four+ drives and has a SDRAM slot for cache expansion. Coupled with LVM, it ended up being a good solution for me, as I had both the reliability, and good volume management if I wanted to combine arrays.
The problem I've had with the software RAID is reliability and expandability. It is a pain in the ass if you lose a drive in the array, and it is next to impossible to add a drive (other than a stand by drive) to your existing RAID 5 setup.
Aah, opinions...
------------------ D. A. Davenport: http://www.firebin.net
Dude, that's hardware. Turn off the dma on your drives with hdparm.
/dev/hdb
/dev/hdb
hdparm -d 0
You might also have to turn off 32 bit mode:
hdparm -c 0
Of course, this will slow things down.
Be sure everything's jumpered correctly.
Also, of course, I'm not responsible if you fry your data!
-- I am. Therefore, I think!
3-4 years ago, when we decided to use hardware RAID on our Linux servers, we bought some DPT Smartraid V hardware RAID controllers. Unfortunatly DPT was bought by Adaptec some time after. Adaptec has been really good at getting the driver included in the kernel, but the takeover seemed to delay this proces, so the time in between was a rough ride.
The lesson learned was, never have a production Linux system with (binary) drivers tied to a specific kernel or distro version.
That said, we have been very happy with the controllers, and since at least two disks has died without warning, the expense has easely been worth it. Our systems are used 24/7/365, so every minute of downtime annoys somebody. RAID really makes me sleep better, restoring a server from a slow tapestreamer, at some ungodly hour, while people nervously checks in, asking when we will be up again, is something I really want to avoid too much of.
YMMV, but I think hardware RAID still has an edge over software raid, mostly because I find it simpler to maintain in the long run.
If you are into LVM's, FS tools, and software RAID, go to:
http://evms.sourceforge.net/
and _drool_. Future stuff for now on production servers, but nevertheless.