Pre-Fab Homes?

itwerx asks: "I am considering purchasing a pre-fabricated home to put on an empty lot in an urban area. I have researched hither and yon and Googled to my heart's content and found great gobs of information online. The question here is what the SlashDot community's own experience has been with this type of technology? Anybody purchase a pre-fab home recently? What was your experience like?"

Comments

My parents just put one up

[duffbeer703]

It's big colonial that came in 5 pieces... and it is absolutely magnificent.

If you go with a good builder, you're gonna get a house as good or better than a conventional home for less money.

It tends to be easier to find a good prefab builder than a reliable contractor, depending on where you live.

Just one tip: If you are building a house in the country or suburbs where there is no city sewer, MAKE SURE that you perform a perk test BEFORE purchasing the land. If the soil is clay or too rocky, you could spend as much as 50-75k putting in a septic system!

Do your research

[dlockamy]

I work in construction, we've worked on a few modular homes and from what i've seen you can find some well build ones.

We did some repair work on one last winter, a tree had fell on the house and it was barely damaged.

This particular house was build WAY above code, it was very empressive. I wish i knew who manufactured it, i would have recommended them highly.

Consider how they're built

[Hanzie]

I've had exactly these questions. Fortunately my wife's father spent 20+ years building houses, and firmly believed that building a house to last a century saves money in the long run. Since he's gotten older, he's worked as a building inspector for the local city, and a couple of others.

When we get together, he tells me stories of stupid dishonest contractors. (I ask for them so I know what to look out for). Apparently, it's pretty common for the cities not to have enough inspectors, especially in fast growing areas. It's also common for inspectors to let the contractors know in advance what will be looked at closely and what wont. Large tracts of homes are especially vulnerable to inspection oversight. For dishonest contractors, it's cheaper to fix what an overworked inspector catches than to build the entire thing to code. Especially if you know the inspector, and know what he looks for and what he ignores.

He very much likes pre-fab houses for quite a few reasons (detailed below). He's also a big fan of steel framed houses, since they're strong and easy to put up. And don't burn. Wires are also very easy to fish through them. They also have extremely strong points under the supporting I beams, good for hanging unlikely things like water beds.

Pre fab vs onsite:

Pre Fabricated houses are built in a heated factory by workers with all tools and materials close at hand. Building supplies are instantly available, and are replaced as needed.

On-site building requires timing of delivery of supplies. Lumber brought in advance is subject to waiting in the rain, theft, vandalism, and bugs in the dirt. Tools are brought to the site, and if one breaks, gets lost, borrowed or needed elsewhere, an inferior tool will probably get drafted for the job. Supplies are bought in quantities just enough for the job, and if an accident or shortage happens, they're will probably be a "stretching" of supplies to make it through the job. Or it's running over budget and cheap stuff is substituted.

Pre-Fab: The compressed air is high pressure and lots of volume, meaning that the tools all work properly. The factory is well lit and problems, if arising, can be corrected immediately.

On Site: The compressors are small enough to carry around. They don't have the same power (they work, but can't handle the same duty cycle)

Pre Fab: completely engineered, and any problems have been long since solved, and properly corrected. It's on an assembly line.

On Site: often designed one at a time, for each plot of land, so each one is different. Sometimes boneheaded mistakes are made in the design, but not caught till later. The fixes are ugly, but hidden (suprises later!). Once the house is built the contractor is gone, and he didn't do the work anyway, he subcontracted it to guys who are operating on a shoestring,cutting corners everywhere possible.

Contractor: Get the job done for the least amount of cash acceptable. Do a good job where the building inspector is looking, unless it's a subdivision. Then there's no time for inspections and horrible things happen, like stealing the rebar out of the cement forms before the pouring. Unbelivably stupid, but it happened.

The mentality of the factory owners is like Avis rent-a-car "We're #2 so we try harder". Everybody equates them mentally with ramshackle mobile homes, so they have to be nearly perfect to even try to compete. Oh, and since the "mobile home" rep is still dogging them, they have to compete on price, and the house is a continuing "model home" because all the owners friends are going to ask about it.

Any materials for building on upper floors have to be lugged up stairs^h^h^h^h^h^h ladders (ever try to climb a ladder with both hands full?). Every extra bit of adhesive/lumber/brick/drywall mud/nail used is one more that has to be lugged up. Was it even delivered in the first place? If they run out of something, they'll substitute with something else to get the job done.