O'Reilly's New Magazine for DIY Tech Projects

sargon writes "O'Reilly will begin publishing a new magazine, 'Make,' in early 2005 which is aimed at the do-it-yourself crowd. To quote the home page: 'Make brings the do-it-yourself mindset to all the technology in your life. Make is loaded with exciting projects that help you make the most of your technology at home and away from home. This is a magazine that celebrates your right to tweak, hack, and bend any technology to your own will.' The first issue will focus on kite aerial photography." Any suggestions for what they should cover?

Comments

A White-Hat-Hack-zine on paper, nice

[wertarbyte]

Most magazines here (in germany) claiming to be about hacking cover subject like "How to copy ANY CD!" or how to 'hack' your neighbour's WLAN, these magazines seem to aim at 13 year old wannabe-crackers who just discovered this secret hackertool "tracert" with which they can "track and locate" other computers on "T43 n37". I hope that this new magazine will present the term "hacking" in the right light. Well, it'll be hard to receive in germany I guess.

Interest High

[mefus]

I'm very interested in such a magazine, but disappointed that they almost inevitably are or become those "gadget" magazines spoken of in the description.

I think the advertisers in such a magazine often end up fighting the reader base and pulling the focus of "cheap and homemade".

Maybe there's a better chance this one will stay focused if O'Reilly is the publisher?

I wouldn't buy it...

[ThisNukes4u]

Because half the fun in trying out cool stuff is thinking up the idea yourself, then trying to put your idea into a physical (or binary) representation. This magazine would take out all the fun.

Re:I wouldn't buy it...

[darkonc]

Because half the fun in trying out cool stuff is thinking up the idea yourself, ..... This magazine would take out all the fun.

Not at all.. The magazine lets you see what other people are doing. This gives you some interesting ideas for:
1: Things you might want to do that are (slightly or completely) different
2: Ways of getting unusual things done on a budget not signed by the NSA.

The guys that were the technical advisors to one of the second world war escape movies ("The Great Escape", I think) considered the possibility that it might give future jailers ideas about preventing those same tactics from being used again, then decided that what was most importat was teaching the committment to thinking up ingenious methods and diversions that was most important, while the specific tactics were all but irrelevent.

Lots of projects to do

[strider3700]

This is something that I'd be all over.

I've just finished building a projector out of a LCD some lenses and a very bright lightbulb. Got the plans from www.lumenlab.com and I have to say it works amazingly well.

Next project is getting mythTV or Freevo working with my hauppage under linux to give me TV on the new projector(It was plug and play under windows but I can't stand 2000 anymore)

After that I'll be using the serial port on my motorola cable box to let the PVR change channels on the cable box. At that point I don't know where to go with my media center. Maybe remote PC's to let me access the backend from all the rooms in the house?

Now as for the magazine I'd love to see a nice big how two on creating my own speakers, even if it is just a build a box and plug the parts in I'm curious if this can be done cheaper then buying the nice ones at a store. Home made amplifiers would be cool as well.

Getting away from my media viewing, I'd love to see articles on wiring up houses. Temp sensors in every room/area, on the water pipes. A way to monitor electric usage on every circuit. Door/Window open/closed monitoring... All linked back to a PC with some nice logging software to keep track of whats going on in the house.

There are tons of other things I'd love to have but can't afford so I'm forced to build them. The difficult part for the magazine is going to be how difficult some of them are. Using one project to develop the skills needed for the next is a great way to learn but if you jump in to the magazine part way though you could end up stuck. If they don't gradually get harded the long term readers will be bored.

Um..not to sound stupid, but....

[Generalisimo Zang]

I'd actually be interested in something like that, and I know others would be too.

Sometimes people forget that not everyone is endowed at birth with immense knowledge (like the parent poster apparently was :P ), and that many people would appreciate something that walks them through the simple first steps of new concepts.

What really tees me off about a lot of tutorials and manuals, is how they'll go into great detail on the basic principles (great), and they go into great detail on solutions to intermediate and advanced level concepts (again, great), but they spend a tiny ammount of time quickly glossing over the first few steps to actually get something done (arrrghh!).

It's sort of like getting some piece of furniture home from Ikea, and discovering that the pictographic instruction sheet had been replaced by a journeyman carpenter's course book.

Yeah yeah, it's great to be able to see how to shingle a roof and build drywall... but I just want to know how to put friggin Tab A into Tab B so my Ikea bookcase doesn't collapse when I set it up.

So, please don't disparage anyone who's going to actually step up to the plate and provide good solid basic knowledge to people who may not have been exposed to it in a way that they could actually USE it before.

Basic knowledge is a good thing... except for those of you who were born knowing everything :|

Focus on old tech

[Seraphim_72]

Dont give me projects that require the latest and the greatest. If I have to spend $300 to save $299 it isn't worth my time - though it may be really fun. If it costs $1200 - even if it involves sex it isn't going to be that fun. For example I have two old b/w gameboys lying about - tell me how to port the screens to my computer. I have tons of old hardware - tell me how to solder in flash ram from a thumbdrive into an old digital camera. Provide How-To's to the how to's, not everyone was born witha soldering iron in one hand and a Bridgeport in the other. Gimme anything that an old stick of RAM is good for. Or an old scanner, or zip drive. Have a case mod corner - I don't case mod at all - but I find them neet to look at. Starting in #3 start a basic course, a mid and advance course in electronics. Have something that involves gun powder, and another that involves a catapult. .Get feature articles about cool stuff people have done, and &exactly& how they did them. Get advertisers that supply stuff - for example, short of Radio Shack I know of no place that will sell me a resistor - get me some adverts that will. Get that "Dark Tipster" guy from Tech TV to write a column. There, hell, do you guys need any actual help? Call me.

Sera

I got an idea

[segfault7375]

This is a magazine that celebrates your right to tweak, hack, and bend any technology to your own will.... [snip] ...Any suggestions for what they should cover?

How about where to hire a good lawyer that knows how to defend against DMCA lawusuits?