Slashdot Mirror
Self-Adapting Traffic Lights
Roland Piquepaille writes "If you're like me, I bet you hate moments when you're in a hurry and all the traffic lights seem to intentionally switch to red just in front of your car. Now, according to Nature, a Belgian traffic researcher thinks that traffic lights that respond to local conditions could ease congestion and reduce your frustration. His method would not give you the individual power to switch the light to green. But if you were part of a group of cars approaching a red light, inexpensive traffic-flow sensors would detect your group in advance and turn the light to green. His simulations show that such adaptive traffic control is 30% more efficient than traditional ways of regulating traffic. However, his system has not been adopted by any large city. So you'll continue to be frustrated by these ?%&$! traffic lights for a while. You'll find more details and references in this overview."
Are you sure they are weight sensors? I was under the belief that those sensors worked on the principle of induction. They send a magnetic field up through the pavement, which induces a current in any metal vehicle above. That induced current, in turn, creates a magnetic field which is sent back down through the pavement to the sensor. Works in any temperature and will even dedict lightweight objects like motorcycles.
Now I just need one that will recognize my motorcycle at 2am when no cars are around to tigger the lights for me.
I ride a supersport Yamaha YZF-R6. Weighs about 410 wet and I have problems triggering many stop lights, so much so that I have areas I don't ride when traffic is light because they never turn green for me.
Try lining up your bike tires with one of the edges of the sensor when you pull up. Once I learned to do this I was able to reliably trip the sensor and get the light to change.
The sensors work off of magnetic induction (like a metal detector) and your bike just doesn't have that much metal to be detected. Positioning yourself along the edge of the road's sensor should trigger the light.
My current bike won't engage the solenoid if the bike is already running. I don't have to shutoff the bike first. I just press the start button real quick and the light turns green. Since most lights are switching to camera sensors this isn't as useful now. Flash the lights a couple of times and the camera will pick it up as motion.
Well, they have the capability to detect motorcycles and bicycles, but often the street dept. lowers the sensitivity to the point that only vehicles larger than a small car are detected. This is well documented on many motorcycle discussion boards.
N redlitelaw/
Motorcyclists in Tennessee can legally run red lights because of this
http://www.motorcyclecruiser.com/newsandupdates/T
"a Belgian traffic researcher thinks that traffic lights that respond to local conditions could ease congestion and reduce your frustration. His method would not give you the individual power to switch the light to green. But if you were part of a group of cars approaching a red light, inexpensive traffic-flow sensors would detect your group in advance and turn the light to green. However, his system has not been adopted by any large city."
I am a traffic engineer, and traffic lights similar to what this Belgian traffic researcher describes already exist. They are called "actuated signals." They work as follows: Loops (not weight sensors, but magnetic loops) are placed in the roadway approx. 300 meters before the traffic light, then 200m, 100m, 50m and 10m. When the light is green for this path, every time a car drives over a loop(assume 300m loop), the green light time is extended long enough for the car to reach the next loop (200m), and so on and so forth until it reaches the 10m loop, where the green light is extended long enough for the car to travel safely through the intersection. Now, if the 300m loop is not reactivated every 3 seconds, the light "times-out" and will turn red once all vehicles have passed through the intersection safely (so if a vehicle is on the 100m loop, the light doesn't just turn red). Additionally, the light has a maximum green cycle time (sum of green and yellow light time), typically 58 seconds. So, if there is a never-ending stream of cars, the light doesn't remain green forever. I hope this clears things up a bit. Also, actuated signals are intended for minor arterials (major collector streets), not for principal arterials (expressways and large intersections).
"His method would not give you the individual power to switch the light to green."
Actuated signals do give you the individual power to switch the light to green.
Sydney has had this for the over 20 years.
Around 2500 of the intersections in Sydney are linked together and they "marry" and "divorce" each other based on live statistical data as cars flow through the intersections.
It's a self-calibrating system. It has been exported to many countries.
The local intersection controllers measure traffic flows and adjust timings locally and also are linked to regional controllers that share statistics for an area and these regional controllers are all linked to the central monitoring facility in the city.
Google on the Sydney Co-ordinated Adaptive Traffic System (SCATS)
e.g. http://www.traffic-tech.com/pdf/scatsbrochure.pdf