A First Look at AMD's M2 Platform

Knight Thrasher writes to tell us that Tom's Hardware has an interesting first look at AMD's AM2 platform. From the article: "While Intel will be answering later this year with its Merom/Conroe processors, AMD officially says that the introduction of its AM2 platform and DDR2 memory support in the second quarter of this year will be able to maintain its current lead. Unofficially, we know that AMD will launch six dual-core and two single-core AM2 processors on June 6 - later than initially expected but well in time for Intel's Conroe, which will be introduced in September. Tom's Hardware got its hands on a stable engineering sample of an Athlon 64 X2 4800+ for Socket AM2 and will publish benchmark results as first as a first impression of the new Socket and processors tomorrow."

Comments

Ahhh yes

[OverlordQ]

and will publish benchmark results as first as a first impression of the new Socket and processors tomorrow.

Nice to see the Editors are living up to their name.

Re:Ahhh yes

[Gogo Dodo]

Well... I'll give the /. editors a break here because the linked article says exactly what the quoted text says. So one could blame the editors over at Tom's Hardware.

Article Vaporware

[ortcutt]

So, Slashdot is now referring to articles which will be up tomorrow?

Re:Article Vaporware

[pimpimpim]

You can still get that functionality, just turn off the 'Flux Capacitor' option in your Preferences.

This is the first step towards duplicates

[BadAnalogyGuy]

1) Publish story about fancypants new platform being delivered to reviewers
2) Reveal that the benchmarks won't be available until later
3)
4)
5)
6)
7) Dupe!

(Actually 4-6 are also duplicates)

Where are the FB-DIMMs?

[MBCook]

That's nice, good for AMD. But where are the FB-DIMMs? I like that AMD moved the memory interface onto the processor die and I think it was a great step (Intel is supposed to do this in a few years) but the fact they had to change sockets for DDR2 really bugs me. I understand why, but still.

FB-DIMMs should be available by now. If I would go out and buy a socket M2 processor, I'd have to buy a new socket and processor when FB-DIMMs came out (or the switch to DDR3 or whatever). If we had FB-DIMMs then one processor would work with DDR/DDR2/DDR3/SD/whatever just by switching out the memory since the interface is serial and built onto the memory chips. It would allow the life of boards to be extended much longer. Look how long PCI lasted. If you bought a new motherboard in the PCI era and you could keep using it all the way up to now because the socket stayed the same and the memory modules just changed (even though the physical pin out stayed the same) you could do it. Now that PCI-Express is here, we could do that easily for the future.

FB-DIMM is supposed to simplify the board layout too since you don't have to run all those parallel data/address lines to each DIMM. This is supposed to make layout much less complicated. Imagine how many pins would be needed on an Opteron if they wanted to put 4 memory banks on the processor instead of the 2 they have now. That would be a few hundred extra pins. With FB-DIMM that might be one hundred extra pins.

The only need to update the socket would be to provide additional power pins (you could future proof this a bit by putting extra power pins on) or other features (I've heard of someone, Sun perhaps, trying to put Ethernet on the processor die).

I like AMD, but isn't it time we get past these custom memory interfaces for each standard?

Re:Where are the FB-DIMMs?

[Firehed]

While definately worth considering, I'd imagine DDR2 will have enough life in it - at least on the desktop segment - for this to not really be a huge issue. While the idea of needing to buy a new motherboard every time is a bit irritating, you'd have to anyways, unless you have crazy soldering skills. Couple that with the fact that by the time you're ready for a memory type upgrade that once-brand-new processor is probably quite out of date, it's not a huge issue. I recently picked up a two gig kit knowing full well that DDR2 for AMD was on the horizon, and I'm not all that bothered. Chances are I'll bump it up to four at some point next year, and hold off on a new processor (and thus new memory) until quad-core chips are available. I figure that an overclocked dual core chip should hold me over for at least the next year, and I'm not too worried about graphics upgrades as I think PCI-E is going to be around for just as long as PCI, if not longer (thanks to it's future-resistant nature; just add more lanes and you have more bandwidth). In fact I heard rumors a while back that AMD might try to incoprorate a PCI Express controller onto the die as well (leaving basically... what... ethernet and storage interfaces on the chipset?), but seeing that PCIE gains more bandwidth by adding lanes rather than being clocked higher, it seems like it's just moving costs around. While it would probably help consumers in the long run, it's irrelavent to this; point being that moving the memory controller from the northbridge to the processor die actualy increases the speed at which it communicates with the rest of the system. In fact, I'd wager that architectural difference between a P4 and A64 is making the largest difference in terms of overall performance.

Don't get me wrong, I love the idea of using FB-DIMMs since it would just mean changing out the motherboard and not also the processor, but with the relation between processor and memory interface, I don't see it as being a big issue. Especially considering the fact that DDR2 is available and about equivalent to DDR in prices (about $150 for a 2x1GB DDR400 or DDR2-533 matched pair, as of two seconds ago at Newegg), whereas FB-DIMMs are unavailable right now and will probably start off pretty expensive compared to what's out.

DDR2?

[TubeSteak]

I thought DDR3 was the future?

I read that it is expected late 2006/early 2007 and Samsung claims it'll be 2x the speed of DDR2 and it'll operate at 1.5v (less power consumption).

I know NVidia is already using it on video cards...

Re:DDR2?

[Anonymous Coward]

I know NVidia is already using it on video cards...

nVidia is using GDDR3 which is based of DDR2 and has nothing to do with DDR3 (reference).

Re:DDR2?

[MBCook]

Video cards are always ahead because of the high bandwidth they need, and more importantly the lack of compatibility. Each time you release a new video chip, you can just change the pin out and add as many pins as you want. You don't have to keep using the same exact pin out for 5 years so that users can upgrade their processors.

Speaking of which, how many normal consumers actually DO upgrade their processors? Maybe we should move back to the soldered on processors of the past. No socket to be stuck to, no expensive ZIP socket to put on the board (you can't tell me that 940 pin ZIF sockets are cheap), not much downside (if your CPU dies, most people would just buy a new and faster computer today for the price to get the thing repaired).

Re:DDR2?

[Yehooti]

I'm disturbed the Socket 939 has had such a relatively short life. It has served me well when upping from a 64 3500+ to a 64 X2 4400+, but I was expecting more time before another significant socket change. Am I the only one disappointed in this rather fast change to an even newer socket MB?

Re:DDR2?

[DrMrLordX]

DDR3 is the future, and some were speculating that AMD would leapfrog DDR2 completely and go straight to DDR3. Apparently, DDR3 supplies, availability, and prices aren't yet in the range for AMD to push it as their supported memory type in desktops.

DDR2 has some drawbacks that make it less attractive for AMD platforms than even DDR. However, it should be noted that AMD has recently announced that socket AM2 will launch at DDR2-800 speeds rather than the initially-planned speed of DDR2-667. This increase in memory clock should negate most of the latency concerns surrounding DDR2 vs DDR. Should.

Re:DDR2?

[mcrbids]

Speaking of which, how many normal consumers actually DO upgrade their processors? Maybe we should move back to the soldered on processors of the past. No socket to be stuck to, no expensive ZIP socket to put on the board (you can't tell me that 940 pin ZIF sockets are cheap), not much downside (if your CPU dies, most people would just buy a new and faster computer today for the price to get the thing repaired).

What makes you think the ZIF socket is for the consumer? No, it's really about the small tech shops, which represent a significant portion of sales. Typically, you'll see a small shop stocking 2 or 3 different types of Motherboards (one for high performance, one for cheap-o upgrades, and one somewhere in the middle) and a half-dozen processor speeds.

With this scenario, the shop only has to stock 1 or 2 of each type of motherboard and maybe 5-6 processors. Stock is bad, because the deflationary index of computer gear is so high, so this lets just a dozen or so parts provide many different combinations for customer needs. This makes it more profitable for the business, and so more likely to stay in business.

This leads to more sales, and more happy customers. Probably worth the $0.45 it costs the manufacturers to have the ZIF socket.

Re:DDR2?

[Deliveranc3]

DDR2 is a step backwards in performance but it's cheaper.

Then the bottom fell out of the memory market (Pretty late Memory is behind the curve on improvement specifically in terms of performance... so many systems are still being made with DDR333) so as a memory manufacturer of course they are going to try to stir the market into an expensive new standard... Part of doing that is hitting people up about their current performance, for AMD it matters and they are relying on AMD to push memory tech with their integrated controller.

At first it seems that it would provide a slower upgrade path but they can integrate lower latency and higher bandwidth far more easily than Intel.

AMD would have to commit to a new memory architechture because their chips will be designed to only work with it, so they want a tested solution, they're not scared of commiting to a memory architecture with low performance they're scared of commmiting to one with a high price tag.

Intel was REALLY hurt by XDR...

I mean that was a masacre, AMD has multiple developers for their chipsets so the only chink in their armor would be a new memory arhitecture.

While Intel has fsb problems they don't need to worry that Intel will find a new memory tech because they just won't be able to take advantage of it fast enough that AMD won't be able to upgrade their platform.

Re:DDR2?

[Malor]

That's the downside to the on-die memory controller. AMD has to make certain you don't mix the DDR-only chips with the DDR2-only motherboards, and vice versa.

Had the memory controller been on the Northbridge, a la Intel, they could have kept the old sockets, but then they wouldn't have had as much of a performance advantage.

Re:DDR2?

[ericmarshall]

I know NVidia is already using [DDR3] on video cards...

Not quite.

The memory on the nVidia cards you are talking about is actually GDDR3, not DDR3. The name is similar, but the technology is not.

From the Wikipedia DDR3 article:

The GDDR3 memory, with a familiar name but an entirely dissimilar technology, has been in use for several years in high-end graphic cards such as ones from NVIDIA or ATI, and as main system memory on the Xbox 360. It is sometimes incorrectly referred to as "DDR3".

Re:DDR2?

[dan the person]

Not just for the small tech shops.

Can you say "build to order"?

If apple or hp etc find that more people are selecting the option to upgrade from 2.0Ghz to 2.116Ghz processor than they anticipated, then they can direct the assembly plant to start putting more 2.116Ghz processors in the motherboards as they assemble a notebook or processor. That is going to result in a greater supply of the faster machines in a day or two.

Such a request to the motherboard manufacturing plant to start making more boards with the 2.116Ghz processor soldiered on is not going to see a greater supply to consumers in a day or two. The assembly line might take longer implement the change, but more importantly you've a couple of steps further down in the supply chain. Once the MBs have been manufactured you've still got to wait for them to be shipped to the assembly plant and then for them to be assembled into complete computers.

Re:DDR2?

[Surt]

Unfortunately, AMD has no choice. They have to change sockets every time they upgrade memory types, because the memory controller is built into the chip. As a result, expect another socket change in 3 years to switch to DDR3.

Re:Socket?

[ortcutt]

What's the point in using the same socket if your old processor won't work with it anyway? Changing the socket keeps people from thinking wrongly that they can use an incompatible processor with the motherboard in question.

Re:Socket?

[ortcutt]

Socket 940 Processors use ECC, registered DIMMs. Socket 939 processors use unregistered DIMMs. So, making the processors different by one pin keeps people from using a processor in a motherboard which won't work with it.

Re:Socket?

[be-fan]

AMD hasn't changed sockets just for kicks. The 754 to 939 transition was to add extra pins for the dual-channel memory controller. The AM2 socket transition will be to add support for DDR2 memory. These things required not just extra pins, but extra traces on the motherboard. Moreover, the traces have different timing characteristics because of the change in memory type. So even if AMD had used a socket with extra pins, old motherboards still wouldn't have the right lines to connect them to.

Anandtech

[Gogo Dodo]

I'd rather read the AnandTech article on AM2

A couple of things

[Rob_Bryerton]

Being sort of a slow news day, I tried something different and actually read TF "article", as there were no comments featuring "in Soviet Russia" yet posted. First off, SPONSORED LINKS are evil and annoying.

I see the blurb mentions introduction of 6 dual core & 2 single core chips, and I wonder if this will be the new product tier differentiating mechanism: dual and single. Traditionally, we'd see the low end, which was the crippled version of the mid-range, then the high end typically added more cache and un-crippled SMP abilities. Perhaps the low end will be single core, mid-range dual, and high end w/larger caches & 4/8-way ability.

Now that the MHz "wars" seem to be behind us, it's a race to pack multiple cores onto chips, which I see as a good thing. I've always had a thing for SMP rigs (my current & previous boxes are duals), and dual-core going mainstream means several good things for us SMP freaks, the least of which is more affordable 4-way boxen!

In closing, I'd like to mention that this whole blurb about a story (which is in fact an ad vehicle) which references a yet-to-be published story, is rather silly and bizarre. And poorly written. Like my post.

Re:FB is not a panacea

[Wesley Felter]

You're overlooking the frequency difference; because FBD is point-to-point, it can run at 5GHz or more, compared to a mere 800MHz for DDR2. Thus with an equal number of pins, FBD gives much more bandwidth.

Yes, with FB you can put all your DIMMs on a single set of signal lines.

That's not how it is used, so I'm not sure why you are emphasizing that. IIRC, Blackford systems have 4 FBD channels (using fewer pins than two DDR2 channels).

Evil

[Belial6]

If they actually release it on June 6th 2006, (6/6/6) they should work out some kind of deal with ID to include a free copy of Doom3 with each processor for the rest of the year. If not, they should do SOME kind of fun thing with it. Although, they will probably chicken out, just like when they clock doubled the 333mhz processors, somehow they ended up with 665mhz.

This is nothing to complain about

[Dr. Spork]

I don't know how many socket architectures Intel has introduced in the last two years. I just stopped caring enough to count. AMD, on the other hand, has basically standardized on one: 939. They deserve a lot of praise and respect for the fact that 939 runs everything from (almost) the bottom of the line to the very top, which is a big range, covering at least eight distinct core designs.

Nobody believed them when they said that they won't make you buy a new mobo to upgrade to dual-core processors. Amazingly, AMD kept their promise! They even migrated some Opterons to 939 so you can upgrade your home computer with a real server chip. Now compare this to Intel and you'll see how disciplined and customer-friendly AMD have been.

Of course, they want to make use of DDR2, and since your old motherboard doesn't have DDR2 slots, you'll need to buy a new motherboard to use DDR2. That's the end of the story! You'd have to be high to think you could keep your board and just upgrade to DDR2. AMD switched the pinout a tiny bit so that you don't make the mistake of plugging in an incompatible processor into the board. There's nothing more to it than that.

So maybe people are complaining about being forced to go to DDR2, but I don't think that will happen. I'm quite sure there will be several new AMD processors for Socket 939, probably priced at the same level as their AM2 counterparts. The only difference will be the memory controller. Of course, it won't make much sense to buy 939, with DDR2 being almost as cheap as DDR.

Maybe people were complaining about the extra burden on mobo manufacturers to retool, but this is absolutely minimal, as the Anand article makes clear. We will see many cheap AM2 boards almost right away, because they are so similar to Socket 939 and 940.

Really, this is a great illustration of how a socket change should look.

Re:This is nothing to complain about

[Gogo0]

Ah yes, all those dastardly intel sockets in the past two years...

478 to 775
umm...

I should have posted as AC because Im going to be modded down to hell, but whatever.

Mod parent +5 AMD Fanboy (people on slashdot call it Insightful for short)

Re:This is nothing to complain about

[ceeam]

What about mobile and "Core" CPUs?

Re:This is nothing to complain about

[Xross_Ied]

Please note
940 is DDR Dual channel registered memory with ECC support
vs
939 is DDR Dual channel non-registered memory
Reference: http://www.hardocp.com/article.html?art=NjI2

One was designed for server/workstation requirements; registered and ECC support.

The other was designed for desktop requirements where price is and total system costs (ECC memory is significantly more expensive) are more important.

Re:This is nothing to complain about

[level_headed_midwest]

Hey hey, what about Socket 603/604 for the Xeons?

Oh hey, my mistake...

[YesIAmAScript]

I thought FB-DIMMs were merely buffered (as the name implies).

Nope, they're not. They're arranged in a big serial shift register.

The problem with this? Latency goes up as you put in more DIMMs. Why? Because data from the 4th DIMM has to pass through (not just by) the 3rd DIMM, 2nd DIMM and 1st DIMM to get to the CPU.

Sound familiar? It's just a retread of RDRAM.

No thanks. Intel boned themselves with this before. If they want to push this, they better get ready to take a backseat to AMD again. DDR outdistanced RDRAM handily on performance and price/performance, I'll be surprised if things are any different this time.

I hope you enjoy your higher clock speeds, you'll need them to try to get your latency down to managable and your bandwidth up to normal. I mean, with 1/4 as many data pins (I assume the 28 data pins carry only 16 bits of data at once, vs 64 of DDR/DDR2), you're going to have to go 4X as fast just to match the bandwidth and latency of a regular system. And as soon as that 2nd DIMM is put in, you're behind on latency and you're going to have to play catch up.

DDR2

[jeeperscats]

Yes! AMD has DDR2, I wonder how long it will take Intel to catch up with them on that one....oh wait, nevermind.

How about something like....

[10Ghz]

A video-card? Allow me to clarify: Video-cards routinely have 256bit mem-buses right now, and they have RAM that runs at around 1GHZ, giving them metric assload of memory-bandwidth. In order to achieve that, they use RAM-chips that are soldered right on to the board, and they have hefty heatsinks. What if processors had something similar?

Processors would be sold in cards not that different from vid-cards these days. They would connect to a slot, and they would fhave the CPU, and attached to that CPU would be about 512MB (maybe more, maybe less) of very, very fast RAM on 256bit bus. Of course, it would cost a bit, but not more than video-cards do today (I bet that GPU's are more expensive to make than CPU's are). Yes, there are issues of memory-expansion, but what if there were regural DDR2 mem-banks attached to the northbridge on a "normal" 128bit bus that could be used for additional memory?

If we had a SMP system with this kind of setup, it would offer A LOT of bandwidth. Each CPU would have very fast RAM attached directly to it. And they could access the RAM attached to the other CPUs. AND they could also access the RAM attached to the northbridge.

Or maybe if they used the locally attached RAM as L3-cache? 512+MB of cache, anyone?

Is this idea completely stupid, or does it have some sense to it?

Re:How about something like.... l3 cache

[sankacoder]

AMD just licensed something called zram which will allow them to bundle oodles of L3 cache in the near future.
http://www.geek.com/news/geeknews/2006Jan/bch20060 216034806.htm

Oh, shut up with the fanboyism already

[Anonymous Coward]

First off, you left out several currently used Intel sockets, including the mobile one(s). The AMD side has been very simple: Budget (754), Mainstream and Workstation (939), Servers (940). That's it. It's not hard. The mainstream S939 offering spans everything from 1.8GHz super-cheap CPUs to dual-core opterons and monster (2.8GHz) FX62 CPUs. If you can't get an upgrade out of your S939 board you're not planning it right. Mobile? Shit, you can put your low-wattage Turion64 in (almost) any old 754 board! How's that for an upgrade?

Heck, I've got a S939 board which also supports AM2 via an add-on daughterboard. For me, that's a really pointless solution considering the overall price of switching CPU and memory, but hey, it's there if you want it. If this works out, the maximum CPU that I can upgrade to on this S939 board hasn't even been announced yet, maybe not even planned.

What socket will the new Intel Monroe stuff use by the way?

no, you misunderstand now...

[YesIAmAScript]

See link:

http://www.theinquirer.net/?article=15189

What happens is on each clock, the 1st DIMM transfers its data to the CPU. The 2nd DIMM (if there) transfers its data to the 1st DIMM, the 3rd DIMM (if there) transfers its data to the 2nd DIMM, etc. Thus each DIMM gets the data from the next DIMM, puts it in a buffer, thus regenerating the signal electrically and emits it upstream on the next clock. You could call this "daisy chained". This limits how far each DIMM has to drive its data, which is why FB-DIMMs can claim better electrical characteristics.

What this means is to get data from the 3rd DIMM, it takes 3 clocks just to get the first bit of data (presumably 16 bits) to the CPU. The "good" news is that since this system is (semi-) serial, the clock has to be very high already, so this latency is somewhat mitigated.

FB-DIMMs are point to point, but the point-to-point doesn't mean each DIMM connects to the memory controller, it simply means each DIMM is only on a bus with one other DIMM (well, one upstream bus and one downstream bus). Each DIMM forwards data along these busses in both directions. But again, there is no way for the 3rd DIMM to get to the memory controller without going through (and not just by) the 2nd and 1st DIMM first.

Your extension of my argument to PATA vs SATA just underscores your misunderstanding. My concern is with the latency of intermediate forwarding of data. SATA (well, the version in regular use) doesn't even allow you to attach multiple devices to a single bus, let alone have the devices forward the data to the head. Note that PATA allows multiple devices per bus, but it is a true bus, in that the data from the far device just goes by the near device, not into it and back out.

SATA is taking off due to connector costs and cable routing in the case. RAM doesn't face cable routing difficulties. It does face signal routing difficulties, but these only need to be solved once per motherboard design at worst, not once per installation as in cable routing. In addition, the signal routing complexity is much higher for ultra-high speed busses and thus the problem of signal routing will be solved the same way for FB-DIMMs as for DDR or DDR2, which is one company (Intel) will make a reference design and the other motherboard designers will just leave those signal lines alone and add other signals in the I/O area where they want to put on additional SATA RAID controllers. And in regards to connector costs, FB-DIMMs don't change the DIMM connector and thus don't reduce the cost of the DIMM connector. So I don't see a parallel here at all.

Finally, as to DIMMs and busses being forward compatible forever, it's just not going to happen. You'll have the same problem you did with SDRAM (or DDR or RDRAM). All SDRAM was compatible with each other, just the speeds changed. So you can use your old slow DIMMs as long as you don't mind that slowing down all your memory accesses.

Finally, the reason RDRAM failed isn't as simple as your comments that the RAM people screwed RAMBUS. The problem was the RAM people didn't feel like being screwed by RAMBUS. RAMBUS wanted license fees on all RAM made (see their grab at applying their patents to DDR) and so they tried to make RDRAM the standard. Intel also wanted more money per motherboard sold (not just happy selling the CPU). Intel's first attempt at making this happen was Slot 1, where they force-bundled the 2nd level cache memory in with the CPU (2nd level cache SRAM revenue could be $30-$50 per mobo back in the Socket 7 days). Note that 2nd level cache moved to the main CPU chip later. Intel additionally decided to license slot 1, claiming patents on it. Regular front side busses could not be patented, as they were purely functional, considered the most basic way to do something. Slot 1 was positioned so as to patent the physical connector and form factor so they could enforce their fees.

Intel decided to threaten VIA (a very popular Socket 7