Water Cooling Computers With A Swimming Pool
guzugi writes "This is a project I have been working for several months and been hypothesizing for much longer. The basic idea is to shortcut the need for an air conditioner when cooling multiple computers. Swimming pool water is pumped into the house and through several waterblocks to effectively cool these hot machines. This greatly reduces noise cooling requirements."
Because I always choose clorinated water to ensure the maximum corrosion in my computer's cooling system.
Watch out for condensation if your coolant (swimming pool water) is colder than room temperature! You don't need crazy temp differentials to cool a CPU. If you pull water from outside, odds are it will be colder than the air around your water block. This can cause all sorts of problems. Room temperature water is even easier to deal with than cold water. If you are just looking for quiet operation rather than crazy overclocks, you won't need the pool.
Plan for a bit of condensation. Flip your motherboards around so if drops of water (*god forbid*) were to form, they drop away from the mainboard. Water from condensation tends to be pure enough that it won't short out your system as easy as one might think. Still... bad things can happen.
Also, you will want some sort of anti-crap mixed into your water, or you can get all sorts of funky growth. More of an issue for closed systems than water from a swimming pool (with all the CL, etc). Be sure your piping can handle that. I've seen folks use hose that did deteriorate over time. Not pretty. A clogged 'artery' on a heat sink will kill your system dead. Non-conductive anti-crap additive is a really good idea.
Lastly, if the water pump dies, everything else will die. Make sure you have some sort of kill switch so all your hardware shuts down if you lose water flow.
Check out the overclockers forums out there. While you don't need the extreme lower temperatures, a big radiator and large low RPM fan in another room make for a very quite office environment.
+++ UGUCAUCGUAUUUCU
Depending on temperature conditions the heat would build up in the box also, cutting the lifespan of the motor down. Since he has a pool to begin with I would assume he lives in a area with hot summer temperatures. Just my two cents(probably not even worth that).
"The universe is my dwelling place and my house is my only clothes! Why are you entering into my pants?" - Liu Ling
Heat Exchanger
Just because you're using the pool as a heat sink doesn't mean you have to run the actual pool water through your computer.
Now, this guy doesn't seem to have caught on to that, but it's not a totally implausible solution. Keeping the heat in water, even through an exchanger, is still more efficient than trying to dump the heat directly to the air, at least until you build a radiator the size of your pool.
To avoid the problems with chlorinated pool water corroding the waterblocks and other hardware, he really needs to install a water-to-water heat exchanger in the system. Pool water would run in the primary side of the exchanger, with distilled water or glycol on the computer side. A second circulating pump would also be needed.
Remember "News for Nerds, Stuff that Matters"? Help make it a reality again! http://soylentnews.org
Problems:
The right way to do this is with a heat exchanger that is robust on the swimming-pool side and has conditioned water in a closed circuit on the other side. Requires two pumps, but has a change of working longer than a few (if that) months.
Most ACs are not even worth the keystrokes to insult them. Be generically insulted by this and ignored otherwise.
put your CPU into a separate room.
I do not believe in karma. "Funny"=-6. Do good and forbid evil. Yours, Oft-Offtopic Flamebaiting Troll.
What I think you guys are confused about is what they put into pools. The chlorine of choice nowadays is calcium hypochlorite
No, I'm not. I've owned a pool for years. The most commonly used form of chlorine is Trichloro-S-Triazinetrione (or Trichloroisocyanuric acid or simply, trichlor). Calcium hypochlorite breaks down very quickly in sun light (uv light) and requires the use of a stablizer (usually cyanuric acid). Trichlor already contains a stablizer, making it much more economical to use.
Anonymous Cowards suck.