InkJet Printers Lying, Or Just Wrong?
akkarin writes in about a study reported at Ars Technica on how accurate ink-jet printers are when they report that cartridges are empty. Not very, it turns out. Epson came out on top of the study (and Ars rightly questions how objective it was, given that Epson paid for it), but even they waste 20% of the ink if users take the printers' word for when to get a new cartridge. On average, the printers in the study wasted more than half the ink that users bought.
The problem is that the printer manufacturers are now caught in this model. Nobody dares go back to charging the "real" price for the printer and the ink, as their printers would immediately seem more expensive to the average customer.
In an ideal world the model would be unsustainable, as third party ink manufacturers would undercut the official ink packs. But the printer manufacturers have consistently abused their market position and IP law to prevent third party ink manufacturers competing on equal terms. Your average consumer doesn't even know he can get cheap alternatives, and life is increasingly difficult for even sophisticated consumers as the printer manufacturers build in IP-protected electronics into ink cartridges.
All in all, it's clearly bad for consumers and the kind of thing the competition/anti-trust authorities should be investigating.
Wow, this has been one of those things that really piss me off for quite some time. While it is true that the laser jet printers do better than inkjets they ALSO LIE and ARE DESIGNED TO FAIL.
For example; I bought a laser two years ago (from a company that rhymes with hell). I bought it because I needed to print letters to clients and do things like print checks. Nothing heavily graphics intensive nor really heavy duty text work either.
So here is what I discovered with my 'efficient' laser printer; My '5000 page' toner cartridge prints about 1000 pages. Pissed, I decided to open one up as they are about $100 for a new one.
Lo and behold it was still full of toner. Somehow, as the printer printed the quality of the prints degraded as the toner 'ran out' a little more with each print. At the time I figured this was because there was no toner but the proof was now in my hands (and all over my desk for that matter) so I decided to investigate further. It seems that these toner cartridges use chips to tell your pc that its running out each time you print.
Now, I'm not electronics guru, so I don't have a machine I can actually read the chip with, but I am under the impression that this chip also purposefully degrades the quality of your prints as it counts down your toner level. To test that theory I ordered some refill kits off of the web.
First thing I noticed after doing the chip replacement was that the quality of the prints immediately improved. I printed for several weeks, noticed the quality go down again, replaced the chip (no toner added in there yet...) and viola worked beautiful. When that chip said it was empty I opened the whole thing up again and took a look. This time it was indeed very low, but not empty. I poured in the new bottle of toner and put in a new chip and went back to work.
I usually order 3 chips for each bottle of toner I purchase . Currently I get about 4000 pages per bottle of toner. My refill purchases cost me $29 for two bottles of toner and six chips (on chip comes with each bottle and I add the other four to the order) Let's see$200 vs $29 for two 'cartridges' worth of prints... hmmm.... yeah I'll refill. Add to that the fact that the purchased carts don't get the same mileage as the refilled ones with extra chips to replace the old ones.
I guarantee I will never buy another 'rhymes with hell' printer again.
Caveat emptor indeed.
Prospecting Stinks. Stop Wasting Time on Cold Calling.