Slashdot Mirror

← Back to Stories (view on slashdot.org)

DOE Shines $21M on Advanced Lighting Research

Posted by ScuttleMonkey on from the bright-ideas dept.

coondoggie writes to mention that the US Department of Energy is planning to fork over close to $21 million for 13 projects promising to advance solid-state lighting research and development. "SSL lighting is an advanced technology that creates light with considerably less heat than incandescent and fluorescent lamps, allowing for increased energy efficiency. Unlike incandescent and fluorescent bulbs, SSL uses a semi-conducting material to convert electricity directly into light, which maximizes the light's energy efficiency, the DOE said in a release. Solid-state lighting encompasses a variety of light-producing semi-conductor devices, including light-emitting diodes (LEDs) and organic light-emitting diodes (OLEDs). "

3 of 238 comments (clear)

  1. Re:Can't beat incandescents by GregPK · · Score: 4, Informative

    The best flourescent out there gets roughly 70 lumens per watt. LED's have already passed the 100 lumens per watt barrier.

  2. What rubbish by EmbeddedJanitor · · Score: 4, Informative

    LEDs are far more efficient than incandescent. I have an LED/incandescent flashlight that lasts far longer in LED mode than incandescent mode but is not quite as bright. ie. Led brightness * LED time far greater than incandescent brightness * incandescent time.

    --
    Engineering is the art of compromise.
  3. White LEDs are different by sd.fhasldff · · Score: 4, Informative

    And, no, LEDs are not fluorescent. Fluorescent bulbs stimulate mercury to emit UV light. The UV light hits the phosphorus which makes it fluoresce and produce visible light. LEDs work by jumping electrons across a band gap and a photon is emitted when it jumps back down. The high efficiency comes into play because it doesn't take much more energy than that of the band gap to make an electron jump.

    *White* LEDs don't work that way. You might assume that white LEDs are simply three (or more) normal LEDs combined in a single package. While it is possible to make white LEDs this way, it's not the method usually used (for several reasons, including "color integrity").

    Instead, white LEDs are typically made by coating a BLUE indium-gallium-nitride (InGaN) LED with phosphorous. This is not all that different from a fluorescent bulb, which is what the GP postulated.

    Different color temperatures can be achieved by varying the phosphorous coverage. Lower coverage lets more blue through (cooler temperature), whereas higher coverage causes more blue to be absorbed and thus more of the phosphorous emission spectrum to be emitted. The dominant line in the most commonly used phosphorous for LEDs is around 580nm (yellow).

    It's also possible to get white LEDs that are made by coating a near ultra-violet LED with phosphorous (thus getting even closer to the fluorescent bulb of the GP).

    This might change in the future, with serious work being conducted in the field to improve on reliability, efficiency and color characteristics. To the best of my knowledge, however, none of the new methods (go search for yourself) are commercially available and as we all know, many things that seem promising in the lab never make it to market for any number of reasons.

    For reference, red diodes emit at ~ 630nm, blue diodes at 470nm, green at 530nm. The exact wavelength of the emitted light depends on the materials used in the LED, of course.