The Windbelt – a Cheap Wind-Power Generator
dominique_cimafranca writes "Shawn Frayne, a 28-year old inventor, has developed a small wind-powered generator that can be used to power small appliances in developing countries. Unlike the typical propeller design one expects of wind generators, the windbelt uses the oscillation of a membrane that follows the vibration of bridge. The oscillation drives small magnets which generate the electricity. From the article: 'Frayne's device, which he calls a Windbelt, is a taut membrane fitted with a pair of magnets that oscillate between metal coils. Prototypes have generated 40 milliwatts in 10-mph slivers of wind, making his device 10 to 30 times as efficient as the best microturbines. Frayne envisions the Windbelt costing a few dollars and replacing kerosene lamps in Haitian homes.'"
It's simple - cheap to manufacture and I bet it's as reliable as hell.
This guy is genius.
I seem to remember hearing about this a couple years ago...
dupe: http://hardware.slashdot.org/article.pl?sid=07/10/14/1240206
Sometimes, life itself is sarcasm...
The air needs to pass over this resonating piece at a particular speed to start it resonating (flapping). Is there some sort of way to adjust the tension of the band during use to account for faster / slower winds or is it only good at 7.9563 mph winds?
Windows has more viruses because linux has more virus coders.
40mW in 10 MPH wind for $5: Scale to 1W would take an array of 25 at a cost of $125.
This would be, looking at his prototype, about 50cm x 100cm...
The cost/watt however, is just astronomically bad. A 1 kW wind turbine is $3000 (which would produce ~400W at that windspeed)...
Its really a clever idea, but just not efficient enough to be economical, even to just glow an LED lamp.
Test your net with Netalyzr
Hooray for the Bernoulli effect!
Some things can scale, but there are other things that really can't be enlarged. For example, ionizing air currents. Yes, it works on a small scale to move air through a Sharper Image filter, but you couldn't effectively push the air through a house's HVAC system with just thin wires and a high potential difference.
If this belt technology can be scaled up to generate kilowatts as opposed to milliwatts, it would have a real use. Otherwise, its similar to small solar panel technology in the 1980s -- will power a small motor or a clock, but that's basically it. It may at best end up a niche product as something to power remotely located low-wattage computers, such as weather stations in heavy forest.
I know that he talked about scaling up. Put that down to usual inventor exuberance. All of us who've gotten an invention working have experienced that. What matters is that is entire apparatus of about ten parts can be built of scrap, in a couple of hours.
.
Yeah, sure, he's using optimized materials. But anything thin and flexible could be tested, have its optimal shape for flutter in a given environment determined, and used to make these. I knew some guys who did the sensors for their thesis using strips of mylar from potato chip bags.
Magnets are the one hard part and even those can be pulled from dead speakers or whatever.
Wound wire? We've all built our own generators as kids, yes? Winding enough for an electromagnet like that is no big deal. And wire turns up in waste streams all over the place. That's why so many baskets and such from rural craftspeople are made of it.
Rigid frame? Whatever's around. I'm not entirely sure just how rigid that frame needs to be but worst case scenario we're talking about a chunk of iron cut out of a dead car.
And so on.
What this does is enable illiterate people with a few hours of training to make a device from things they don't have to pay for that can power basic things like lights. And from what I'm seeing, it's the kind of thing that will propagate. UNESCO staffer teaches Jose. Jose's brother comes by and asks about it; Jose teaches his brother. Brother's wife wants one to sew better; she makes one for herself. The wife's friends drop by . .
Excellent. All we need to do is provide superbright LEDs and whatever parts turn out to most be in demand and soon, count on it, there will be innovations by the dozens turning up that the inventors and NGO folks never even knew about.
It's all about the information. And what we do with it.
This article is from 2007. Didn't we cover this once before?
If you want a really cheap wind turbine, the usual answer is to chop an old oil drum in half and mount the halves on the end of an old auto alternator. Then you can charge a car battery.
Great idea but must admit when I first heard the name 'Wind Belt', I imagined some kind of wearable, flatulence-powered generator...
Have you looked at the comments to the popular mechanics article? It's really not meant to be a flame, but most of them look like they're from 12 yr. old kids! Between one who think the only thing you can make out of it is a flashlight, to one who want to put an end to the U.S. energy crisis using that... So far every single comment I read ranged from being pointless to totally stupid... wow!
The target audience can make very effective use of mere milliwatts.
40mW is quite enough for a roof-mounted generator to power an all-day (wind permitting) transistor radio inside the shack or house. It's enough power to blow your eardrums out if you use piezoelectric headphones, and it's just about sufficient for personal listening on small piezo speakers too. And yes, transistor radios are ubiquitous in even the poorest societies, having been mass-produced for half a century.
What's more, radio amateurs exist in all countries, and the micropower part of the low-power ("QRP") ham community is well versed in 2-way communications at these power levels, not only reception. It's amazing what you can do with milliwatts when you try, and for some things even microwatts can get the job done.
Up the power of the roof wind generator to a mere 100mW and you have a very useful and general purpose source of domestic power for its intended audience, free of fuel costs and easily self-maintainable. It looks underwhelming from our power-guzzling perspective, but that says more about us than about what you can do at these power levels.
Scaling power is hardly ever linear. Does a car engine cost 100x as much as a chainsaw engine? I think not.
Engineering is the art of compromise.
The main website for the technology is http://www.humdingerwind.com/ Last press release is almost a year old, and the developer kits which are promised on their website for "middle of 2008" are non-existant. Shame.
insight through the mind
How loud would a rooftop size one of these be?
Take away the magnets, see what happens. This is not renewable energy people.
I'm a minority race. Save your vitriol for white people.
>making his device 10 to 30 times as efficient as the best microturbines
How do you say the following and still sound smart?
> My idea is 40% as efficient as yours???
I do completely agree that access to markets and strong trade are what will finally bring those countries out of what is a very dark age.
That said, there is something to be said for the small innovations inching this process forward. There is a lot of lost productivity in having one's night cut short by the lack of light to do productive things by. While another poster points out that wind is inconstant, an inexpensive roof-mounted dual mode, wind and solar battery charger that fed LED lighting in the "family room" could buy several extra hours very productive time in the evenings while making the kerosene that would normally power such light available for things like farming equipment. This is a great time to read and in prove one's education, which is a non-trivial component of New World market participation.
So while I can see that the problems that make the 3rd world are large; cheap, year round, fire-hazard free night lighting is not a bad step forward.
What the poor countries really need is less population. The least painful way to do this is birth control. Or, the rich countries of the world could just stay out of the way and let nature regulate the population by the means of starvation, disease, and warfare.