Slashdot Mirror
Circuit Board Design For a Small Startup?
Patrick Bowman writes "I'm with a small (okay, it's just me) startup planning a camera-related USB device for the mass market. It's probably patentable so I can't give details. I can handle the software but have no hardware design or manufacturing experience. Does anyone have any recommendations for a company to handle the PCB design and manufacture? Instead of starting from scratch I've also considered approaching one of the companies (mostly in China) that make similar devices and asking them to modify their hardware for my requirements, and to provide their source for me to modify. Has anyone taken this route before? How did it work for you?"
Express PCB will do prototype PCBs for as little as $50 for three units. Free software to get started with (no autorouting but hey).
In my direct experience, they are highly-skilled in copying/ripping off and even building on/improving on original ideas. Note: This is for stuff which is often already trademarked, registered and patented.
So, I'd suggest getting some VC/angel financing and professional help, and patent your idea to hell and back in major markets before doing anything else. OK, they'll take a huge chunk of the eventual gain, but 50% of something is a lot better than 100% of nothing.
It's nice and all to think you can be the next Richard Branson by doing it all yourself, but in reality very few businesses go from zero to IPO with a single guy pulling all the strings.
[FUCK BETA]
Think twice. If you request a vendor modifying his product, and it's easy enough he can do it right away -- how do you think you can ensure he won't run his product line to make more devices than you have requested?
By contract perhaps? Go and sue a chinese vendor in China, then...
First, build a prototype yourself so you know it will work. Or find someone at your location with the appropriate knowledge. Short distances speed up development. The one will then very probably be able to design a custom PCB out of the prototype. And the appropriate software (e.g. Eagle) isn't expensive.
But if you shouldn't know how to build the prototype yourself, I wonder how you know your invention will work at all...
However, good luck.
The slighly overweight penguin.
http://www.pad2pad.com/
A printed circuit board manufacturer providing all your custom printed circuit board
http://www.olimex.com/
Electronic design and PCB sub-contract assembly
http://www.eurocircuits.com/ ...also...
PCB manufacturing; verified a la carte on demand specifications
http://www.emachineshop.com/
Machine shop to create custom parts, products and prototypes
http://www.tapplastics.com/
TAP Plastics specialize in fiberglass resins and fabrics for fiberglass repair, plastic containers, and custom fabrication
(non-affiliation yadda yadda goes here)
"Good news, everyone!"
Depends on where you are - I recommend working with someone local. This is the kind of project where you would want to work very closely with the manufacturer.
I second this sentiment. A 3 hr flight to your supplier just puts a big wall betwen you and them. I don't know the scale of operations you are looking into, but you may want to do a few site visits/surveys to make sure that they are up to snuff.
Parts control is important. Just because a component comes from the same supplier, doesn't mean that it was manufactured in the same plant. I learned the hard way that some plants produce on the high side of their tolerances, and some plants produce on the low side of their tolerances. And some plants just don't meet their tolerances.
A refund on a $50 component isn't comforting when all of a sudden your latest units start failing infant mortality tests.
Out of modpoints but really liked a post? 1BDkF6TtmmeZ3yqXbz9yhdYVqRYnwFoXDj
There is a cottage industry of small engineering firms that could suit your needs in the US (assuming your in the US). Generally they are run by senior engineers who have done many projects of similar size to what you're sort of talking about. Generally the firms in China do not do their own design work, and unless you speak Chinese, the language barriers will be an extra challenge to overcome, not to mention the difference in time zones. Also don't forget you will have to gain certain regulatory approvals depending on the nature of your product, and I doubt anyone in China has much background designing the product around these requirements. Personally I think it is best to stick with a local company, or at least one in the same country as you.
Something I don't think you will get from others is the suggestion that before you talk to anyone you get a copy of an excellent non-disclosure agreement (NDA).
With a good NDA you can talk freely about your project with little risk of the second party being able to talk to a third party without significant financial repercussions. I have worked in procurement* for the last sixteen years and I could talk for hours on the value of a good NDA. Try using Google for an example of a good NDA. They need not be complex, but they do need to spell out the repercussions if the second party talks about your idea with a third party. Get them to sign before you share any critical details.
*I hate that we stopped being purchasing and became procurement for one simple reason; one of the accepted definitions of someone who procures is pimp! I really don't think that is the impression a Fortune 500 company wants to make, but then they did not ask me. :)
We have always been at war with Eurasia!
Good luck getting source code from Chinese companies. I've tried a few times, and even with a company that I already buy tens of thousands of dollars of equipment from, the answer has always been an emphatic 'no'.
In some cases, the problem may be that the source code isn't theirs. Take two way radios, for example. There are many, many different models on the market that all share the same basic firmware. Each of the companies licenses it from one design house, probably along with some of the hardware designs, too.
It's often hard to tell who's even a manufacturer and who's just a trading company, unless you go and personally tour the factory. Even then they can make it difficult to figure out who's who.
Where I HAVE had a measure of success is in buying partial products. For example, if you look on SparkFun Electronics' website, you'll see a weather sensor assembly. I bought those from a weather station manufacturer in China, and since their usual wireless interface wasn't FCC approved and wasn't needed for my application anyway, I negotiated a deal to buy the bare sensors at a significantly reduced price that still gives them enough extra profit margin to make it worth the hassle (the unneeded touch screen display is the expensive part), while still being far cheaper than designing and producing my own hardware. The reason they're at SparkFun now is that I'm way behind schedule on designing my own electronics package and I got tired of them taking up warehouse space, and sold part of the lot at wholesale.
The good news is that lots of Chinese companies are basically family-owned, and you CAN sometimes get through to the people who make the decisions, where with US companies you might not. But again, I've never had any success getting firmware source (even relatively simple stuff that I could recreate myself in a week) from any of them. Cable assemblies, housings, and so forth, sure. But not a single line of code.
If you're serious about making it happen, consider catching a flight to Hong Kong next month. The Hong Kong Electronics Fair, electronicAsia, and the China Sourcing Fair are all there at the same time around the 12-16th, and the massive Canton Fair (this will be my first year there) is right after that in Guangzhou, but that takes a little more planning.
Just showing up in person and leaving business cards (bring a few hundred, seriously) will get you much better responses later in email. They know you're serious enough to make the trip, at least. That was a benefit I hadn't foreseen my first trip. Also, allow a couple of days extra after the fairs for meetings with vendors if you do make some good contacts.
Also, one book I've found particularly useful in understanding the business culture in China is "The Essential Guide for Buying from China's Manufacturers" by James Lord, ISBN 1419628461. Wish I'd read that before my first trip there. (Tip: Beware the phrase "no problem". =])
If you do make it to Hong Kong, drop me a note and I'll meet you for a beer some time.
scott@argentdata.com
I work at Plexus, a global Electronic Manufacturing Services company, in the engineering services division. We do hardware, PCB layout, software, mechanical, test, project management, etc. Whatever piece or pieces you are looking for, we can do. If you want to use us for manufacturing eventually, great. You pay for the development, so you own the IP and can take it wherever you want. We work with multi-billion dollar companies but also have worked with 1-man startups before.
http://www.plexus.com/contactus.php
Lotsa good and horrible advice above.
If you're going to make a commercial product, and you want it to be manufacturable and have high yield and work reliably for more than a week, you need a lot of expert help.
You need an EE to design the circuit.
Then you need a manufacturing EE to redesign the circuit so it does not use any rare or known unreliable or hard to surface mount or single sourced parts.
Then you need a quality engineer who will redesign things so the hot voltage regulator is not right next to the electrolytic capacitors, and shuffle the pcb traces so they're less likely to short out from tin whiskers, and rearrange them for better ESD protection, and they will test it in an environmental chamber for performance over a wide temperature range.
Then you'll need a standards EE who will make sure it meets EU and US standards for safety and toxicity and flammability and electromagnetic emissions.
Then you need someone on site at the manufacturing facility to do QA and make sure they don't divert your product into the black or grey market.
Then you need enough extra time and money to do the whole thing over again if the original design still turns out to be unmanufacturable or have poor yield or reliability.
Don't feel too bad, when Apple set up their own disk drive manufacturing facility, the yield even after extensive tweaking was only about 40%. And that's with huge amounts of money and lots of experienced engineers in the area.
You need a whole lot more than a PCB house.
You want to target the mass-market, yet your firm consists of only you? You need to think about how you are going to get mass-market retailers to actually sell the thing, how you are going to get press coverage to publicize it, where you are going to get funding for the production runs, etc.
There are certainly ways to go about this for software (i.e. a game developer producing a little gem for XBox Live), but because of manufacturing costs, this is harder to do for hardware.
I think your best hope is to get a crude hardware prototype with your software running on it, and let an actual mass-market company buy it off of you (or hire you.) The alternative would be to somehow get funding, but if you have no experience in the industry, you won't find anybody willing to hand you money.
SirWired
back in 1994-95, I had an idea of converting tv signal to a video stream (ala sling media). Contacted a firm in Atlanta, and they were going to charge some 20K (guarenteed 3 boards, etc), but found a firm in HK that would do it for 5K. We opted to go with the 5K. Had issue after issue after issue with them. In the end, after spending 20K and still not having SQUAT from them, I called it quits. That is why Sling has a product and we did not. Otherwise, the unit would be different and it would have come from Colorado.
Do yourself a favor and do it local. Once you have the product selling, if you still feel like you can increase the margins by getting it done overseas, then and only then do it. Just keep in mind that Asia does not have the same laws and know it. Basically they will nickle and dime you to death. And for the states, I suggest knowing EXACTLY upfront what you need done. Shop around. They all have specialties of items that are one offs. There are a number of chips out there that will allow you to try various ideas.
One last thing. If you get your company going, if I may suggest, keep your engineers local. If you go over to Asia, any ideas you have will likely end up in some other product before yours is out the door.
I prefer the "u" in honour as it seems to be missing these days.
Just a thought
Build a Man a Fire, and He'll Be Warm for a Day. Set a Man on Fire, and He'll Be Warm for the Rest of His Life.