Slashdot Mirror
Multiple Fiber Cuts In San Francisco Area
georgewilliamherbert writes "Multiple news reports, mailing list posts, blogs, and tweets are pointing out two overnight acts of sabotage in the San Francisco Bay area, with long distance fiber network cables being cut in two locations in the early morning hours. The first cut, around 1:30 AM, affecting landline and cell phone service and 911 calls in the communities of Morgan Hill, Gilroy, and parts of Santa Cruz counties, was on an AT&T fiber alongside Monterey Highway near Blossom Hill Road, in San Jose. A second cut, around 3:30 AM, in San Carlos, affected Sprint fiber and has significantly disrupted services at the 200 Paul datacenter in southern San Francisco. Rumor says that this may be related to a AT&T communications workers contract having just expired — but no evidence has been published yet in the media, and this could be an intentional act of sabotage by someone unrelated to the company's workers."
The NSA has volunteered to help fix the cables.
Could be someone trying to steal the fiber cables so they could sell the copper.
Who would win this election: Andrew Weiner vs Andrew Weiner's weiner.
I'm happy just to see someone on the Internet spell "wreak havoc" correctly...
rj
A loss of communication could only mean one thing: Invasion.
Demented But Determined.
Say it ain't so!
Talk about people who never left high school mentality behind. Before the local GM plant closed here in Atlanta my friend's mom worked there and he also took up that type of employment. My ex-girlfriend is a UPS driver but not in the union. All can basically come up with the same type of stories. The first rule I learned about buying cars, don't get anything made just before, during, or just after, an agreement is being negotiated. The second thing I learned is, if you have union buddies order the car and they will follow it through the plant for you... don't order the fanciest electronics but don't be surprised at what is under the seat or hidden somewhere.
Sabotaging one's own employer is old hat. Favorite car tricks were bubble gum wads inside of panels. Dries and falls off after leaving the factory producing a nice rattle. Snappy a few clips helps too - but only inside of areas you can't see or get to easily. Getting drunk at work wasn't that difficult, if you got caught you might get in trouble, for about three days... and most of it goes away. As for my UPS friend. Finding dog shit on her car or under the handles is a monthly occurrence. Having her truck break down more than is statistically probable was a nuisance till a friend who knew the guys made it stop. Real damage to her car happened once till the police actually showed up to see it. Then it was down to harmless; if dog shit can count as harmless.
So I put odds on it being someone inside, someone who knows the areas to hit, just what to hit to not cause an all points freak out, but enough to annoy his employer and possibly the guys who get stuck fixing it. Make the office boys work overtime and see how they like it! Yeah that will show them.
Really it will blow your mind.
Please don't think its a majority thing, the fact is most are very good and want a successful company and job, the twits just wreck it all because they are still in that phase of "I'll hold my breath if I don't get my way". The problem is the rest don't do anything about it for fear of being the next target.
* Winners compare their achievements to their goals, losers compare theirs to that of others.
At least he spelled something right in that sentence.
I judt got a nre Kinesis keybiartf so please excusr ant egregiou typos.
Get some pipe and welding equipment.
Yours In Corruption,
Ted Stevens
...but how do you repair a fiber optic cable that has been cut? What is the magic process for sticking it back together?
splicing it together.
http://en.wikipedia.org/wiki/Fusion_splicing
It's like getting two copper wires and just heating the copper to such a high temperature that they melt and re-form one strand.
Back in '05 when our local telecommunications company (TELUS) in British Columbia went on strike, some lines were cut and service for a couple thousand customers was lost. Of course, the first thing the company does is blame the union for sabotage.
Turns out it was just some thieves cutting the lines for copper, but that didn't come out until a month after the labour dispute ended.
Most likely the same thing happened here, thieves aren't exactly smart and most union employees would not risk the bad press something like this would generate.
Free means no restrictions, ironic the FSF's GPL forces restrictions, isn't it? What's your definition of free?
Cut the fiber carefully and cleanly back from the cut, which has ragged ends. Usually a few feet in each direction.
Bring in a fiber patch section.
Go in with fiber polishing gear, to every individual fiber on one side, polish end, test end, polish again until it's smooth enough. Identify what fiber ID that fiber is. patch it together with the patch cable. Repeat on the other side of the patch.
Cross-test to ensure that you didn't cross any fibers in the reattachment - if so, pick one end as new ground truth, and repatch or logically reroute the other to match new physical reality.
Once the whole bundle has been repolished, patched, and tested on both sides, you wrap the patch sections up with new covering (armored section, flexible covering, depends on the cable and location). Apply waterproofing goop.
Put the manhole cover back on. Consider locking it down in place, this time...
This is tedious work, requires careful attention to detail to properly polish the cut fiber ends and repatch them, and for large fiber bundles takes forever. You can start running data through a fiber once its two ends are repatched - you don't have to get the whole bundle back for that - but the whole process can take 24-48 hours depending on how many fibers are involved and how much space there is to work in the trench or down the manhole. In many cases, there's only enough space for 1 or maybe 2 people to be working at any given time, which makes the repairs take forever...
Activity Type Code Desc: PROGRESS COMMENTS
Activity Type Code: PROG
OTDR readings were taken by AT&T West and a cut was located 1600 ft from
the San Jose, CA central office. AT&T West technicians are onsite
working to isolate the exact location of the cut. There are 4 cables
impacted. AT&T Mobility has 61 GSM and 45 co-located UMTS sites out of
service off of Santa Clara Base Station Controllers 15 & 23, and Santa
Clara Radio Network Controller 4. E911 has 52 Location Measuring Units
down. The AT&T West Santa Cruz 11 central office (41,803 ATNs) is
experiencing an SS7 isolation and the San Martin central office (11,904
ATNs) lost it's umbilical and is isolated at this time. The Bailey
remote site (4,973 ATNs) is also isolated. Scott's Valley has 3 out of 4
SS7 links down. The Santa Cruz 01, Aptos, Scott's Valley, Felton,
Boulder Creek, Ben Lomand, San Jose 11, San Jose 13, San Jose 21 central
offices have trunks impacted such that all lines are busy and incoming
calls are receiving trouble messages. The Santa Cruz County SO (178,040
ATNs), Scott's Valley PD (12,007 ATNs) and the UC Santa Cruz PD (14,909
ATNs) are all without ALI at this time. The Gilroy PD PSAP and the
Morgan Hill PD and CDF have been rerouted with ALI/ANI. The Felton CDF
has not been rerouted. There are 17 DSLAMS and 4 ATMS out of service
impacting DSL service. There are 3 SMDI Links down impacting voicemail
service. Verizon's Morgan Hill and Gilroy central offices are currently
isolated. There have been 224,865 blocked calls.
At least this happened in a geographically fortuitous area when it comes to repairing the damage. I hear San Francisco has some of the most experienced pipe specialists in the country
If you are going to allude to the tool, you could at least let people know that it is an optical time domain reflectometer.
I cut it three times, and it's still too short.
I can tell from your UID and the description that you know the old school ways.
I never want to see another polishing puck again.
The new fusion splicers really do make it easy as now it is just strip the insulation back a quarter inch for the 62.5 (MM)or more probably 9 (SM), get a good cleave, and let the fusion splicer rip. Have seen a 24 strand cut fixed in about two hours, with about a quarter of the splices at 0.0dB loss (yes, I do mean ZERO) and the rest 0.05 to 0.1.
I think Corning Cable Systems (Siecor) also has a ribbon cable splicer for instant pigtails up to 72 strand, its been a few years since this happened, so not really up on the latest.
The cables are indeed both glass and copper. But only until you check.
My sig can beat up your sig.
At least he spelled something right in that sentence.
Just not somewhere.