Printable, Rollable Solar Panels Could Go Anywhere

Al writes "A startup based in Toledo, Ohio, has developed a way to make large, flexible solar panels using a roll-to-roll manufacturing technique. Thin-film amorphous silicon solar cells are formed on thin sheets of stainless steel, and each solar module is about one meter wide and five-and-a-half meters long. Conventional silicon solar panels are bulky and rigid, but these lightweight, flexible sheets could easily be integrated into roofs and building facades."

Comments

Re:Imagine that

[jshackney]

From this article, "Building-integrated photovoltaics (BIPV) have been around since the late 1980s, Warner says, but only lately have they begun to see some success with large commercial and residential developments. Recent advances in flexible thin-film photovoltaic materials--such as those sold by United Solar--are allowing manufacturers to more easily integrate photovoltaics directly into the roofs and facades of buildings."

Re:Will we actually be able to buy these?

[moosesocks]

No. They're in the exact opposite situation, in fact. They can't make their product fast enough to keep up with orders, which is why it's not really possible for consumers to purchase them. There are much, much worse positions for a company to be in.

Slowly becoming cost-effective

[benjamindees]

Building integrated photovoltaics (BIPV), especially rooftop applications, would be the biggest market for flexible PV technology, Boas says.

Roofing is a significant cost in a residential structure. Being able to integrate the roofing material with the solar panels can help make photovoltaics cost-effective.

In Las Vegas, for instance, roofs are made of expensive (and heavy) clay tiles, mostly for aesthetic reasons. These run anywhere from $30-$50 / m^2.

Re:Slowly becoming cost-effective

[drinkypoo]

You can already get adhesive thin-film solar "panels" in widths and form factors intended for application to metal roofing panels (the kind shaped like this: A______A — but the As are open like a V and they overlap each other there.) You put it down on some sawhorses and roll out a big sticker which leaves you with a cord hanging off one end. As you put the panels on the roof, you snap the connectors together, and they all get covered by the roof cap at the end. If the roof cap should get damaged, it's inexpensive and relatively simple to replace, all in one piece, so it provides excellent protection for the wiring. You can walk on it, although that doesn't set it apart from today's high-quality crystalline panels.

Re:Slowly becoming cost-effective

[veganboyjosh]

Actually, the clay tiles are used in most desert areas not for aesthetics. Well, not directly. They're the material that's been used in that area for hundreds of years. It's cheap, abundant, and easy to work with.

One more reason they've been the material of choice for so long? They don't spontaneously combust the same way asphalt shingles or other popular materials can.

/nitpicking.

Re:Slowly becoming cost-effective

[benjamindees]

1) It doesn't fit on a roof. The average roof space per capita is fairly tiny. This is the reason people are most interested in small-scale, high-efficiency, and ridiculously over-priced renewable energy production methods such as solar photovoltaics.

2) Deserts are actually pretty windy. Tracking mirrors have to be over-built to stand up to the wind and avoid mis-alignment.

3) Molten salt is high-temperature. High-temperature things could possibly be dangerous. Anything potentially dangerous attracts insurance companies, bands of idiots propped-up by a government that prefers killing people via wars and resource shortages rather than allowing individuals access to useful, possibly dangerous technologies.

4) Aesthetics. Solar panels are mostly unobtrusive. Tracking mirrors and tanks filled with molten salt are industrial-looking, and thus ugly.

So the basic problem is that power from molten salt tanks must be produced and sold as a commercial venture. That means it has to compete with coal and natural-gas fired utilities, and still be efficient enough to return a profit. This will basically never happen unless governments tax fossil fuels out of existence.

Re:How much will it cost?

[TD-Linux]

Cost-per-watt matters much more than density right now (efficiency directly affects density) - look at all the roofs and other potential locations for solar panels. Efficiency isn't the reason they aren't up, it's the high cost. Even 8% efficiency, is still more power than you get out of an asphalt slab.

Re:Will we actually be able to buy these?

[confused one]

100% of Nanosolar's production output is going to large scale (commercial/industrial scale) solar plants. They keep building additional manufacturing capacity but have not saturated the commercial demand. There's no need for them to offer panels to consumers; their business model is quite sound.

Re:How much will it cost?

[linuxpyro]

I have one of these panels, a 10 watt one. I paid about $200 for it new. It's neat, especially since you can fit it in odd places. The high cost is mostly because you can roll it up into a type to store it. If you don't need that, it's not really worthwhile.

Re:Imagine that

[Bakkster]

To change the voltage. Historically, it's been hard to change DC voltages in a small, efficient, compact device.

Bullshit. It's easy to get >80% efficiency with a small Buck Converter circuit, and well designed circuits can get upwards of 95% for some conversions. You know that power supply in your computer? Only about half of it turns the AC into DC. All those voltages you use (12V, 3.3V, 5V, etc) are generated from small, efficient DC/DC converters. It's just a controller, inductor, capacitor, and transistor.

Don't believe me? How's this for small? And yes, I am an Electrical Engineer, and spent a summer designing a power supply with two DC/DC converters.