Slashdot Mirror
The PS3's "Yellow Light of Death"
Xest writes "More and more reports are appearing about PlayStation 3 consoles failing in a similar way to the earlier models of the Xbox 360, except for Sony, it's the 'Yellow Light of Death.' The BBC has an interesting article which suggests the problem could be almost identical to that which caused the Red Ring of Death — poor soldering connections. From the article: 'Several of those businesses have told Watchdog that the vast majority of consoles they see with the "yellow light of death" can be repaired by heating up specific parts of the circuit board. This process is called solder re-flow. By heating the connections between the components and the circuit board to temperatures in excess of 200 Celsius, the metal solder joints melt, just like they did when the device was first assembled. Console repairers say that this process method is commonly used to repair fractured connections, or dry joints.' But that's not the only rule from Microsoft's playbook Sony has been following; while they have admitted 12,500 out of 2.5 million systems have failed (a convenient 0.5%), they refuse to release full figures of failure rates, citing them as being 'commercially sensitive.' Unfortunately, Sony does not appear to be following Microsoft's lead with regard to an extended warranty, stating that if a PS3 fails after 12 months, it is not their problem. In the UK at least, the Sale of Goods Act would disagree with that statement."
So it seems that Microsoft has gotten a LOT of press over this... Sony is picking it up now... how have survival rates been for the Wii?
12 Months doesnt apply in New Zealand either... an item must be of acceptable quality to last for its reasonable expected lifetime... a PS3 would be expected to live longer than 12 months
I worked at an independent repair center that had the highest status you could get from Sony. We could extend any warranty for any reason and fax it to the president of Sony and they would approve it within 24 hours. This was before the console craze when Sony made excellent quality products. It's been a while but I think they were called 'prime' servicers and there were not many of them.
That business is long gone due to the son of the owner embezzling enough money to collapse the business.
I've checked and I don't see any mention of a prime servicer in this area anymore.
I morn the lost of the "One and only" because it's made in a third world country now like everyone else.
I'd go on a Vegan diet but the delivery time from Vega is too long. --brownkitty
The problem is mainly thought to affect the 60GB launch model
This doesn't exactly help me much. First thing I did was replaced my hard drive when I bought it. It's now a 160GB PS3. (upgraded because I upgraded my laptop to a 320GB drive, and the 120GB drive was just sitting around)
According to Wikipedia there were two different 60GB models. One for North America and one for Europe.
So which one is it? Europe? North America? Both? (note the article is from the BBC == Europe)
...which can be found here.
PHEM - party like it's 1997-2003!
Ahh, lead-free solder... is there any problem you can't cause. (Aside from lead poisoning, anyway)
BS.
Blame incompetence and cost-cutting. There is no inherent problem in RoHS (been using it for years), but you CANNOT cut corners in the PCB design or use cut-rate production facilities.
So from reading the title and skimming the summary I thought 'ooh, lots of faulty ps3's. Must be the new slim version. Guess I won't touch that then.'. But only 0.5% failure rate? And nothing to do with the slim? It seems to be a subtle slander piece. I wonder why the program producers would make it?
I'm not a fanboy for the Xbox360 or the PS3 but the simple fact is that a high failure rate is so-far a feature exclusive to the Xbox360.
P.S. There's a long 18 point reply in the comments from the Sony Computer Entertainment's UK Managing Director Ray Maguire.
[This statement is currently in the public domain - 18 September 2009]
Further to your recent correspondence with our PR agency and parent company, I am writing to respond to your queries in connection with the edition of Watchdog that is scheduled for broadcast on Thursday 17 September 2009. I should state at the outset that we are, of course, disappointed if a small number of our consumers appear to have experienced problems with their PlayStation 3 units outside the manufacturer's warranty period and we take our customer care obligations very seriously. It is for this reason that SCEUK operates a service of out of warranty repair or replacement (replacement with a refurbished unit within 48 hours at the consumer's convenience by courier). To be clear, this service is subsidised by SCEUK, there is no profit made by SCEUK on this service.
You have informed us that this broadcast will include a report concerning faults alleged to affect PlayStation®3 consoles, and SCEUK's policy on out-of-warranty (OOW) repairs. Most importantly, we entirely refute the suggestion that PS3 consoles have an inherent defect or other design issue which is akin to any warranty issue experienced by another console manufacturer. SCEUK has sold 2.5 million consoles in the UK since March 2007 and stands by the quality of its products. Clearly the allegations you propose to air in your program might have the potential to adversely effect Sony Computer Entertainment's reputation for supplying high quality products and customer service and we take very seriously any issues that can impact the public's or our customers' confidence in those products.
From the correspondence to date, I have serious concerns as to the accuracy of these allegations and the likely tone of the Watchdog report. The information that you have provided suggests a fundamental misunderstanding of the technical issues and a mis-characterisation of SCEUK's OOW repairs policy. It is in all parties' interests that your reporting does not contain inaccurate or distorted information and the facts are presented in a manner which is not misleading or exaggerated. I trust the detailed information in this letter will enable the BBC to adopt a more balanced and sober approach to this issue than we have experienced to date.
1. You have indicated that a number of viewers had contacted you to complain about a fault affecting their PS3 systems, whereby "a yellow light appears and their console then stops working - anecdotally called the 'yellow light of death'" (your email of 18 August 2009).
2. You clarified in your letter of 25 August 2009 that the majority of those viewers had experienced problems with the 60GB launch model of the PS3. In that letter, you went on to say that, after examining three PS3 systems that had "displayed symptoms" of this fault, the consultancy Electronics Yorkshire noted the presence of higher levels of voids in soldering than would have been expected, in the case of two of those units. Your letter continued: "These voids can be problematic in some cases, but by no means in all cases. In some instances,... these voids can fracture at the inter-metallic interface... If this fracture was to occur on a vital connection, it would stop the console from working. [Electronics Yorkshire] is of the opinion that this problem [presumably: excessive voiding] has occurred during the manufacturing process and not as a result of consumer use or a thermal effect during use."
3. Your letter went on to say that, in the opinion of three commercial repairers of PS3 systems, the supposed "'yellow light of death' fault is caused by a soldering issue".
4. With respect, neither your letter of 25 August nor any other information you have provided (including the Electronics Yorkshire report) establishes that there is such a thing as a "'yellow light of death' fault". In this regard:
The phrase "yellow light of death" has been adopted by certain members of the online community to describe the s
With a failure rate considerably lower than Microsoft you are seriously going to harp on Sony? Really?
Who wrote this, Microsoft?
The comparison is a little unwarranted... Xbox's failure rate was around 16.5%~33%. Having systems fail isn't a problem.... infact .5% is nicely below the industry standards. It is when you can get 5broken ones in a row that it becomes a problem...
I suspect this is just another case of RoHS coming back to bite the electronics industry on the butt. I've used a number of the various lead-free solders, and it's bloody difficult to get a decent solder connection with them -- and even if you do, they still seem to get brittle/cold after some period of time. Too, there's the likelihood that the Chinese manufacturers cut a few corners to increase their profit margins, exacerbating the problem.
--- Asking inconvenient questions for over 30 years...
You obviously never had an original GameBoy. I had one that was handed down to me from my brother, both of us abused it pretty badly. I rediscovered it when visiting my parents a few weeks back, popped four batteries in, and the thing still works exactly as I remember. If I recall right someone had one that survived an explosion in the Gulf War too. I think it might take a silver bullet to the screen to kill one of those suckers.
Computers allow humans to make mistakes at the fastest speeds known, with the possible exception of tequila and handguns
Iian Lee is the person behind these lies:
http://tech.uk.msn.com/gaming/article.aspx?cp-documentid=7838134
He is a paid consultant for Microsoft.
You know...the company with a 33, 55, 75 percent(take your pick) failure rate on their Xbox 360 console...
"So which one is it?"
None. There are no 'affected models'.
This is a slanderous lie from a person who works for Microsoft as an attempt to do damage control over the RRoD hardware failure fiasco.
And when they turn on us, we will be helpless.
Scientists point out problems, engineers fix them
altslashdot.org: The future of slashdot.
Just take a quick look at this thread:
http://n4g.com/gaming/NewsCom-395946.aspx?CT=1
Basically a former Microsoft employee is behind these lies about the PS3's reliability.
The scuttlebutt I've heard is that the new Batman game is especially hard on old PS3s. It's a bigger problem than it would have been because the game is popular and good so a lot of people have been playing it heavily, ultimately to the demise of their PS3.
I read the internet for the articles.
I still have my original Gameboy, which my father bought for me when the machine launched in the US. (Incidentally, I got a Gameboy FIRST. I got an NES later.) It still works, but like many original Gameboys it eventually suffered from the Screen Rot of Doom problem, and it's lost probably 25% of its vertical columns of pixels on the left and right edges of the screen. So it works for only suitably small values of "works." Despite a couple of decades of being abused, getting dropped, smashed, sat on, having batteries left in it for years on end, being locked in closed cars, etc., etc. It's surprising that the screen rot problem (which seems to be a function of oxidation and not mechanical failure) is the only thing that's wrong with it.
I also have a Gameboy Pocket which is not quite as old, but if it were alive it'd be easily old enough to get a driver's license... They corrected the screen rot problem from the Gameboy Pocket on up and mine works flawlessly. Despite the same abuse.
Come to think of it, even my original front-loading NES still works. It developed the same fatigue problems with the cartridge connector as every other front-loader in the universe, but all I had to do was bend all the pins back and smear a little dielectric grease on them and it works better than new... I don't even have to push the cartridge down anymore.
My SNES, Genesis, N64, and oodles of Gameboys... All still working great. Even both of my Atari 2600's are still trucking.
Meanwhile... One of my Playstations: Broken. One of my PS2's has a dead laser, and the other one is in the process of dying. Original Xbox: Dead. One of my Dreamcasts: Dead. Etc., etc. The pattern? Things with moving parts have finite lifetimes. The sad fact is, it seems that optical disk based consoles are just predestined to fail because their piddly little lasers, spindle motors, and tracking assemblies wear out. ROM/cartridge based machines can be made to last forever, partly because the older ones are bog simple machines that barely generate any heat, but also because you can ALWAYS find a way to bodge electrical contact between the cartridge pins and the CPU.
For this reason I predict that the DS will be the last classic console. Your 30+ year old Atari will probably game on forever, but your 2 year old Xbox, PS3, or Wii can never be expected to.
Enjoy it while it lasts, kiddos.
Actually, I watched the tv programme that was originally broadcast and if you watch a clip from the show
http://www.bbc.co.uk/blogs/watchdog/2009/09/playstation3_and_the_yellow_li.html
Take special note on the "Ian Lee may be a self confessed xbox man with a regular column on the microsoft network".
Also take particular notice that he says nothing about red rings of death.
My 60GB PS3 (purchased in Jan 2007) recently folded its 1500th work unit. Unlike my Linux SMP folding box, which needs to be babysat constantly, the PS3 always uploads and downloads new work units without me having to do anything and has probably run F@H without a shutdown for a full month more than once. At an average of 6-8 hours per work unit, my PS3 has spent an awful lot of time at 100% CPU load. In contrast, I probably don't have more than 500 hours or so of disc usage time on it.
If solder being overheated was the issue, I would figure heavy folders would be the first to run into the problem. I have heard that Stanford has had some PS3s folding 24-7 since the introduction of the PS3 folding client... I'd be curious to know if they've had any YLODs.
Do what thou wilt shall be the whole of the Law
Sony does tend to have that "sucks to own next year" thing going on (as does Toshiba), but there are manufacturing problems all across the board. And the biggest one?
RoHS
Electronics have been soldered together for close to a hundred years with leaded solder. Then, the Europeans decided that it would be a really good idea to just pull the lead out of everything. Good move.
What can you replace the lead with? That's a really tough question, and companies have been trying to figure this out in the aftermath. You can't just throw silver or copper into the mix and expect everything to be the same. It ends up that when you do, the solder has a significantly higher melting point (i.e. ever tried desoldering RoHS process solder?) and is incredibly brittle. Where lead would stretch or distort, RoHS solder snaps. And here is your problem.
With IC package miniaturization, consumer electronics now use chip packages without leads. Cellular phones, portable devices, video cards, and many more now use BGA packages, where there are hundreds of balls of solder on the underside of the chip. Each ball has very little mechanical stability as the balls are so small. When the chip's CTE is not exactly matched to the board's CTE, one expands (or contracts) more quickly than the other, and BAM! you have a cold solder joint.
So in the end, what is worse for the environment? Throwing away a Sony product and buying another every year rather than three? Or dumping/recycling the product after three?
RoHS: Planned Obsolescence
Yeah, well that's just one person's experience, yours, so take this with a grain of salt.
Here's another person's experience: Mine.
I purchased my first PS3 off of E-bay, back when they were rather spendy and hard to find (right after they first came out). The unit failed after 14 months or so. I called Sony and informed them of the failure, and they asked me how long it had been since I purchased the PS3, where I had purchased it from, and if I had a receipt. And at this point I thought I was screwed.
I told them I bought it "about a year ago" which was not a lie, I wasn't exactly sure at the moment. I told them I got it from E-Bay and that I didn't have an original receipt.
You would think they would have refused me, and offered no help.
Instead, they sent me a free-shipping box for the old unit, and a new unit free of charge, and asked me to retain my receipts in the future.
Lo and behold, the new unit failed immediately upon trying to run System Update. I called Sony, informed them of what happened, and they again sent me a free-shipping box, and sent me a new unit free of charge.
Again, this is just one person's experience. Mine. And as an aside, I've found that it doesn't matter which company I am dealing with, if I am not a jerk to the service rep on the phone, and actually ask them how their day is going and have a genuine conversation with them, instead of just demanding that they fix my problem, I get a LOT further towards a solution. You can talk all the shit you want about a company, you can claim that it shouldn't matter what my attitude is on the phone, but then you can also expect to get a lot lower level of service from people. Despite the fact that you're dealing with a big corporation you are also, at the most basic level, dealing with another human being.
The procedures and policies a company has for customer service are just your baseline. If you are cordial, polite and genuine with them, you'll find that the baseline at times can be far exceeded.
I do not respond to cowards. Especially anonymous ones.