Slashdot Mirror
Building a Homemade Nuclear Reactor In NYC
yukk writes "Mark Suppes, a web developer for Gucci, is working on his own personal fusion reactor. His work in a NYC warehouse using $35,000 of his own money and $4,000 raised on a website has made him the 38th independent researcher recognized as creating a working fusion reactor. How's that for a hobby?"
I've worked with a couple of these people online before. Depending on where you mark the threshhold, there are a few more fusion hobbyists than most people would think. They're good to talk to because they are some of the few hobbyists playing with high vacuum technology (which interests me for the purpose of vacuum metalization, aka evaporative deposition).
Indeed, at our engineering department a student society just had one sitting on a table in a corner and didn't mention it, as though it was a completely normal thing to have around.
-- All your booze are belong to us.
Its all the high vac stuff that gets expensive and time consuming, its a real pain in the ass. Good backing pumps and high vac pumps (like Diffusion or Turbomoleculer pumps) are tough to come by for cheap unless you are willing to rebuild them. I bought three smaller diffusion pumps off eBay for another experiment and let me tell you its not an easy task finding parts for a $20 nondescript pump you bought off ebay. Then your need vacuum valves to control the pump down process. First you need to rough the chamber and wait for the pressure to drop to about 4E-2 Torr and then keep it there to remove as much vapor as you possibly can. then close the roughing valve and then open the forline valve to pull the back of your high vac pump down and then open the main valve which exposes the high vac pump to the chamber. Those vacuum parts alone can cost hundreds if not thousands of dollars. Also given the fact that high vacuum fittings like Kf or CF elbows, flex pipes, tees etc can cost $50-$100 each! I applaud him for throwing that much money at the problem, he looks like he built a nice fusor with the right parts the first time so he isn't spending hours trying to figure out why he cant pull a vacuum below the -3's (Torr).
Its fun trying to iron out vacuum leaks! Especially without a $20,000+ helium leak detector. But a little vacuum grease on the KF O rings and making sure you tightened your CF flanges properly should help eliminate your problems.
I was trying to build a small electron beam welder for fun. I work on them for a living now so it looked like a nice little project but its not easy or cheap. As of now its a half assembled pile of parts because I cant afford to keep throwing money at it. The 3HP Stokes Microvane (55CFM) alone cost me 550 bucks. And that was a lucky find, don tthink the seller knew what he had. And it needs a rebuild because it cant pull lower than 7E-1 Torr. I also need good vacuum gauges (dial gauges arent much help below a few Torr, and the old Hastings I got from work are not that reliable), Hastings makes real nice ones, have them at work but they cost about a grand for the low-med vac gauges (1E-4 Torr) and I believe 1500+ for the one that goes all the way to ultra high vac (good to 1E-10 Torr).
Anyone who puts this kind of time, money and effort in to their hobby is a real dedicated person. My hats off to you Mr. Suppes.