Slashdot Mirror


Tracking Down Wi-Fi Interference?

Nicros writes "Almost every evening, between 8:30 and 10:00, my Wi-Fi just dies. This, in itself, could be explained by a crappy Wi-Fi source or some hardware failure, except that I know both of my neighbors are experiencing the same loss of signal at the same time. While the Wi-Fi is down, the LAN is OK, and anything plugged into Cat5 can access the Internet just fine. One possibility comes to mind — perhaps some other neighbor arrives home and turns on their router from 8:30 to 10:00? And something in their signal is hosing our Wi-Fi? I have tried looking around for software to help identify the source of interference, but either the programs are ridiculously expensive for a home user, or else my card (Intel Link 1000 BGN) isn't supported. (Netstumbler is an example of the latter.) Any suggestions on how I can track this down?"

6 of 499 comments (clear)

  1. Re:report it to the fcc by FSWKU · · Score: 4, Interesting

    This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

    1. This device may not cause harmful interference, and
    2. This device must accept any interference received, including interference that may cause undesired operation.

    Meaning that the FCC won't do anything if your microwave is making your router go wonky. But since there is something causing outside interference to multiple people, they WILL track it down, as that means there is a device somewhere in your neighborhood that is violating the first part of the above condition.

    --
    "So after all this, you make my case for me. To end this stalemate, you must die..."
  2. Baby monitors -- evil incarnate by Anonymous Coward · · Score: 4, Interesting

    Baby monitors. One of the few devices that can completely trash all wi-fi frequencies in an area, not just for 1-20 minutes like a microwave but for years on end. Especially older models which use an analog signal.

  3. Re:Use your local ham radio club by bezenek · · Score: 5, Interesting

    First try what is suggested by BabaChazz in his comment above and is what most Hams would do to start. Listen for the noise on an AM radio. You do not want FM, as one of the characteristics of FM is to block this noise.

    Take your (preferably hand-held) radio and tune it somewhere on the dial where there is no station. Then, you can try moving it around your computer to hear all of the RF interference your motherboard, etc. are giving off. If you cannot hear this noise, something is wrong with the radio--be sure it is set to AM. :-)

    Leave the radio on, and you might hear the noise start at the time your WiFi drops. If you do not, the interference is not covering the AM frequencies (an arc will cover everything), and it is probably time to call in a Ham.
    It is likely you will hear it.

    If you hear it, you can walk around inside and outside your house listening for where the noise gets stronger. Often this will be tracked down to a phone pole or something else.

    Once you find it, contact the appropriate person (electric distribution supplier, city, etc.) Convincing someone to fix a problem like this is not always easy.

    -Todd

    --
    Omne ignotum pro magnifico.
  4. Re:Don't bet on it being wifi. by e4g4 · · Score: 4, Interesting

    This is very interesting - I've been experiencing extreme wifi interference issues since I moved to my new place (about a year ago) in Brooklyn. My neighborhood is not known as one of the more crime free boroughs in the city, and presumably as a result of that reputation, the neighboring building's backyard has an always-on sodium light at the ground floor (of the brightness and sickening color of your typical street-side sodium lamp). My bedroom (also on the ground floor, facing the backyard) experiences the worst effects of a very obvious latent interference in the area, that is lesser (but not gone) in the 5GHz range, but renders wifi nearly unusable in the 2.4GHz band (with the added interference of several other networks in that frequencey range close by - though there is 3 channel free band). I wonder if the sodium lamp is the issue...

    --
    The secret to creativity is knowing how to hide your sources. - Albert Einstein
  5. Re:report it to the fcc by Walt+Dismal · · Score: 4, Interesting

    And here's another one along similar lines. Some time ago, someone's network went down regularly at the same time every evening. In the end, it was found that the bank on the floors below was turning on a microwave-based motion detector after closing. Perhaps in this WiFi case, something industrial or commercial is being activated nightly nearby? 8:30 to 10 seems a lot like cleaning staff hours. Maybe a floor polisher motor or vacuum with bad brushes putting out a lot of EMI.

  6. Re:report it to the fcc by Tsu+Dho+Nimh · · Score: 4, Interesting

    You know I heard the same story ten years ago but it was that a server would spontaneously reboot. I have a feeling this may be an urban myth.

    No ... I was working in a Norfolk hospital lab when some idiot turned on the horizon-scanning radar for an aircraft carrier that was nearby - it should have been locked down, but wasn't. A lot of our electronics readouts went berserk from the induced interference, harmonics and other crap that thing was belching out. ICU had it worse because all their heart monitors and ventilators were affected. It was an interesting few minutes.