Slashdot Mirror
Why Does the US Cling To Imperial Measurements?
PhunkySchtuff writes "As one of only three countries on Earth that hasn't converted to a metric system of units and measurements, there is a huge amount of resistance within the US to change the status quo. Whilst the cost of switching would be huge, there is also a massive hidden cost in not switching when dealing with the rest of the world (except for Liberia & Burma, the only other two countries that don't use the metric system) With one of the largest organisations in the US, the military, using metric units extensively, why does the general public in the US still cling to their customary system of units?"
I think its alright to have a few different systems in the world. Sure, there is an attractiveness to consolidation. But what are we going to do when we encounter aliens? Demand that they switch to the metric system? I'm actually serious. I'm not saying it will happen tomorrow or even in the next decade or century, but eventually it will. There is a lot to be said for having a tolerance for the differences among cultures and retaining those differences.
In 1988, Congress passed the Omnibus Trade and Competitiveness Act, which designates "the metric system of measurement as the preferred system of weights and measures for United States trade and commerce." Among many other things, the act requires federal agencies to use metric measurements in nearly all of their activities, although there are still exceptions allowing traditional units to be used in documents intended for consumers. The real purpose of the act was to improve the competitiveness of American industry in international markets by encouraging industries to design, produce, and sell products in metric units.
Do what thou wilt shall be the whole of the Law - Aleister Crowley
Call them American units!
I mean, we don't use Imperial gallons here anyway
I love Mondays. On a Monday, anything is possible.
Hi, American scientist here. We do use metric.
When things are done for the media (documentaries, etc), they are translated into Imperial units, because the majority of the (American) audience would have no idea how big or small of things we were talking about when talking in some strange units they aren't familiar with.
Yep. Just to give more background for the young-uns, I was a very young school kid in the 70's. We were told to learn the metric system and get used to it, because before we were out of high school, the country was going to be converted over entirely to the metric system.
That proclamation from our teachers was after congress passed The Metric Conversion Act in 1975. They created the U.S. Metric Board to oversee the conversion.
1979 - The Bureau of Alcohol Tobacco and Firearms required wine producers/importers to switch to metric.
1980 - The Bureau of Alcohol Tobacco and Firearms required required distilled spirits producers/importers to switch to metric.
1982 - Reagan disbands the Metric Board, and fires everyone associated with it.
So we have Reagan to thank for our reliance on an outdated system of measurement. As well as the new trend for Republicans to deficit spend like mad, ballooning the National Debts as never before, and getting religious nut wings involved in politics like never before.
Fractional units come from back in the days when you couldn't buy a calibrated ruler at the corner store. If you don't have a ruler, the best you can do is take an object of known measure (say 1 yard of cloth) and divide it into equal parts (fold it into thirds to get three 1-foot segments). This is probably easiest to see with measures of volume. The English system goes by powers of 2. 1 gallon is 4 quarts (missing unit in between). 1 quart is 2 pints. 1 pint is 2 cups. 1 cup is 2 gills. Why powers of 2? If you don't have calibrated beakers, how do you divide a volume of liquid into even parts? You split it in half (by weight) over and over. So it makes sense for your units of measurement to coincide with dividing in half over and over.
So back in the day when measuring was the hard part, fractions made sense. Today, measuring is the easy part, and calculating with the measurements afterward is the (relatively) hard part. So metric units (powers of 10) make more sense.
I'm an architect, and I'll tell you that the building industry is so entrenched in imperial measurements I haven't used my metric scale in five years. Every single product is based on imperial dimensions, meaning design, coordination, and calculation require the same.
Some examples: joist spacing tables display span lengths for 16" and 24" on center spacings. These tables are everywhere and they've been around unchanged forever. All the plywood sub-flooring is in 48" x 96" sheets. Works great for either joist spacing and in either horizontal or vertical orientation. If you buy a house in the US, standard is an 8' ceiling, "up scale" is 9', exclusive is 10'. (Who would know the status of a 2600mm ceiling?!) Studs are already available and pre-cut to accomplish these heights. Drywall is sold in these lengths. Concrete and soil are measured in cubic yards, roofing by square, carpeting by yard, ceiling tiles in 24" squares, etc. The International Building Code (what most of us use) gives dimensions in Imperial dimensions, including sprinkler head spacing, floor loading requirements, floor-to-floor, allowable areas, etc. Think about it, every plumbing, gas, and sanitary drain system connecting your building to infrastructure is calculated in imperial from engineering tables more than fifty years old. Tape measures are all imperial as is surveying equipment. The entire commercial real estate market is in imperial, changing to metric would crush every agent and developer trying to calculate pro-forma for all real estate in the country. Lumber mills and woodworking equipment that has been around for years and that produce moldings, doors, boards, handrails, furniture, etc., are all imperial. Existing surveys, architectural drawings, engineering calculations, and every other kind of specification, calibration, documentation, regulation, etc. in the building industry is imperial, doing a simple renovation or addition (actually >50% of the building industry) would require the overhead of converting all existing information prior to proceeding.
I've worked on several metric buildings. It takes about two days to get into the swing of it. From an architect's view, scaling and plotting drawings is much simpler than imperial. Not having to deal with foot-inches is easier, too. (Although everybody seems to disagree about whether to use m, cm, or mm. We have native metric users that can't even agree on that.) But it doesn't take long before somebody starts discussing "hard" vs. "soft" metric and wondering if buying 900 mm doors will cost 50% more than 36" doors, if a wheelchair can still fit through it, and where they might come from in the local market if they can even be found. About a day later the whole endeavor goes down the tube when one party in the process gets nervous. We usually switch to "soft" metric for a few weeks (designing in imperial but also stating metric on the drawings) and then abandon the entire metric effort in favor of imperial. The only way a project will stay in true hard metric is if it is being built overseas.
We're going to have to go metric one system at a time. First was soda bottles. Then automobiles. Science is there, and a lot of SI units are becoming comfortable on food packaging. The building industry is going to have to do the same, I predict in places where highly manufactured components interface with imperial ones in a relatively unimportant way. (Think windows cut into a wall.) Commercially, roof membranes are specified in mm and many other components are manufactured in hard metric dimensions with proximal imperial values (like thicknesses of drywall and plywood). But things like bricks, lumber, and plumbing pipe may take a while.
There is no need to use a SlashDot sig for SEO...
But I admit it doesn't matter whether you call it centimeter or inch or measure the distance by the eyebrow length of the great communicator Ronald Reagan.
Call it the freedom fighting anti-communist inch of the greatest empire on earth, if you wish. And make it twice as long as every other country's unit.
Doesn't really matter.
What matters, is the fucked up unit system within the imperial system.
Let's say you want to convert 1/8 inch rainfall to gallons per square yard? Yes, doable, sure. In the metric system however it's just counting zeros and shifting a decimal point.
A meter has 100 centimeter, so a square meter has a 100x100 square centimeter, or 10000. Easy, just count zeros. Liters in a cubic meter? Easy. Kilograms per square centimeter to tons per square meter? Easy, just counting zeros.
But square inch to square feet? Square miles? floz to gallon?
And if that isn't bad enough, add all the competing units used in the US. Air pressure is a different unit when the air is in the atmosphere or in the tire. For energy, there are different units depending on whether it is an air conditioner, a furnace, a car, what company I get the energy from, and whether the second Friday after Lincoln's birthday falls on a full moon.
The difference to the metric system is not, that inch and cm are different. The beauty of the metric system is that you have a consistent system. And that's why scientific calculations are usually done in metric and the result is then transfered back to imperial, so the US public won't get worried that the French took over, communists gained control of the class room, or that their politicians betrayed the greatest conceivable nation on earth.
The problem is that people think that, if we switch, they're going to have to do math every time they see a metric value to make into a value they can make sense of. But that's just not true. What you need to do is just create new reference points. When I see a Celsius temperature, I don't try to convert it to Fahrenheit. I simply remember that 0 is freezing, I need a jacket at 10, 20 is comfortable if it's calm and sunny, 30 is comfortable if it's shady, dry, and breezy, and so on. That's what we've all instinctively done with Fahrenheit, and it's all you really need to do to be comfortable with using a different unit system in your daily life.
Then the winter came, and the Grasshopper died. And the Octopus ate all his acorns. Also, he got a racecar.
that's funny, because in ours (Australia uses metric) our drug dealers sells in ounces and pounds.
A couple of redneck friends of mine started using "klick" as a distance because they found out the US military uses it. Imagine their reaction when they found out (from me) that it was metric (almost as bad as being French, as far as they are concerned).
Climate Progress - Hell and High Water
Yes there was. My favorite sign was on a local highway segment. It said "Metric Signs Next 100 Miles." I swear to God.
But that's just familiarity. If you grew up under a metric system, were taught metric in school and saw metric measurements in everyday objects (other than the 2 liter soda bottles...) then you'd be able to visualize 1 kilometer just as easily as you could visualize 1 mile today.
The issue here is that it will take a generation (or more) to make that transition, during which time all the big nobs will feel increasingly isolated as they're more quickly overtaken by these 'new math' thinkers. Inertia is comforting.
-- Always borrow money from a pessimist; they don't expect to be paid back.
Metric is easier. The big thing that put a big halt on the adoption was the gas crisis in the 1970's when gas creeped to $1.00 gallon. The difficulty was having to compare two standards against each other and the new standard was much more expensive for consumers. As gas pushed $1.00 per gallon. the display on many pumps could not display the higher prices. To prevent buying new pumps, some switched to Liters. Consumers soon found the cheap 35 cent / Liter gas was more expensive and later quit trying to compare prices as common knowledge was the metric gas was more expensive.
In products where we are not comparing metric and US, the metric standard has become the standard. Soda pop is only sold in metric sizes now. 12 and 16 oz are pretty much gone with 1 Liter 500 ml, 2 Liter etc sizes. Most bottled water is now in the 500 ml bottle. All hardware for mounting your flatscreen TV is all metric. Car engines are almost all metric. Serous, when was the last time you wanted to know how much your soda was in price per gallon? All comparison shopping is done is price per Liter for soft drinks except at the soda fountain where the cups are still 16, 32, 48, 64 oz.
The slow conversions is in entrenched measurements such as gasoline, kitchen recipes, temperature, etc where one is the standard and people still try to convert units. You tell them it is 24 degrees out and they want to know what that means in F. Having lived in another country I'm fine with metric as I was immersed in it and did not bother to convert. 21-24 is comfortable. 30 is really hot and 10 is time to grab a warmer coat.
If we started tearing down miles signs and mile markers and replacing them with Metric KM signs and changed the speed signs to 90, the country would soon adopt it. Most cars now can display either clicks or miles.
The truth shall set you free!