Slashdot Mirror
How Power Failures Corrupt Flash SSD Data
An anonymous reader writes "Flash SSDs are non-volatile, right? So how could power failures screw with your data? Several ways, according to a ZDNet post that summarizes a paper (PDF) presented at last month's FAST 13 conference. Researchers from Ohio State and HP Labs researchers tested 15 SSDs using an automated power fault injection testbed and found that 13 lost data. 'Bit corruption hit 3 devices; 3 had shorn writes; 8 had serializability errors; one device lost 1/3 of its data; and 1 SSD bricked. The low-end hard drive had some unserializable writes, while the high-end drive had no power fault failures. The 2 SSDs that had no failures? Both were MLC 2012 model years with a mid-range ($1.17/GB) price.'"
The paper doesn't disclose the brands.
Belief is the currency of delusion.
I had some original Vertex drives from OCZ that kept absolutely corrupting when my laptop got accidentally unplugged and I powered on the machine. I had to RMA them over and over and over again. I finally figured out that my battery was getting old and, although everything was functional even on battery power and it would boot, the initial large draw of power on boot must have created a voltage drop (i.e. brownout) which the SSDs weren't designed to compensate for. Within an hour of boot (even back on plugged power) they would choke, freeze the OS, and be rendered unusable from then on out.
Several SSD manufacturers are probably not engineering well for fluctuating power. Rather than fixing the problem with better engineering, OCZ simply changed their warranty policy to void the warranty if the customer is not providing proper power which, correct me if I'm wrong, I don't think rotating disk hard drive manufacturers have had that in their warranty clauses.
We use USB flash drives for a data logger. Most of the time the data is being buffered in the ARM based Linux board's RAM to save power. Once we get a complete file's worth (4MB at the present) we power up, validate, write the file, and power down. Supercaps have been a lifesaver. There's even enough capacity to do the write cycle if the flash was powered down when a power fail is detected. That allows to not lose whatever what was already in the RAM buffer.