HP Unveils Industrial 3D Printer 10X Faster, 50% Cheaper Than Current Systems

Lucas123 writes HP today announced an 3D industrial printer that it said will be half the cost of current additive manufacturing systems while also 10 times faster, enabling production parts to be built. The company also announced Sprout, a new immersive computing platform that combines a 23-in touch screen monitor and horizontal capacitive touch mat with a scanner, depth sensor, hi-res camera, and projector in a single desktop device. HP's Multi Jet Fusion printer will be offered to beta customers early next year and is expected to be generally available in 2016. The machine uses a print bar with 30,000 nozzles spraying 350 million drops a second of thermoplastic or other materials onto a print platform. The Multi Jet Fusion printer uses fused deposition modeling, an additive manufacturing technology first invented in 1990. the printer works by first laying down a layer of powder material across a build area. Then a fusing agent is selectively applied with the page-wide print bar. Then the same print bar applies a detailing agent at the parts edge to give high definition. The material is then exposed to an energy source that fuses it.

Comments

Since this is an HP product,

[idontgno]

the thermoplastic "ink" will be the most expensive substance on Earth, by weight or volume. And protected by a DRM'd cartridge system. And declare itself "empty" at about 25% remaining, in order to "protect the printer from running dry".

Re:Since this is an HP product,

[Russ1642]

And when you need more printing medium it's cheaper to just buy an entirely new printer rather than a new cartridge.

Re:Since this is an HP product,

[OzPeter]

the thermoplastic "ink" will be the most expensive substance on Earth, by weight or volume. And protected by a DRM'd cartridge system. And declare itself "empty" at about 25% remaining, in order to "protect the printer from running dry".

You also left out that the "ink" levels will slowly decrease over time if printer is not used.

And that if you are out of one "color" you still won't be able to print anything at all - even if you don't need to use that "color"

Where will decent software come from?

[rolfwind]

Eh, I think the weakspot in any 3d printing will be the software. As a hobby engineer, I use Solidworks which is several thousand dollars (luckily already on some of my employer's computers so they foot the bill).

But at home, I tried FreeCad, Cubify Invent, and several other free or cheap options and I find them invariably terrible, at least as far my limited experience can discern. FreeCad in particular, asides from UI nonintuitive issues and heaps of bugs (various cuts and operations simply disappearing for no reason), is only up to v0.14 since launching in 2002. It's like the Gnu Hurd of that genre.

I don't see how the 3D printing revolution will remotely come to town without something decent on the software front that's $200 or less.

*Posted this yesterday in a thread, but was too late for anyone to see it.

As always the description is wrong

[Plazmid]

The printer does not spray "drops of thermoplastic," it sprays magic chemicals that either inhibit or promote sintering onto a bed of thermoplastic powder and then uses a big o' incandescent bulb to fuse the powder. This is pretty much the selective inhibition of sintering process, so the magic chemicals are probably just something like salt water and black ink.

Now what does this mean? Well because you have to spray a sintering inhibitor on, you can't recycle as much powder, unless they give you a special powder recycler for removing the inhibitor. Because you're printing out lots of black ink, can't really recycle powder, and HP will lock you into using their cartridges you will be paying out the a$$ for ink and 'toner.'

This is a HUGE development though. If the parts really have the same strength and detailing as those produced with laser sintering, as in even if this machine did not come equipped with color capability, then this has just made a lot of big industrial 3d printers obsolete. Getting rid of the need for laser and nitrogen gas purge system for sintering type machines is HUGE! Even with huge expensive print cartridges it's going to be cost competitive with everything out there.

Heck, it probably makes the whole 3d printing service bureau business model obsolete, because this puts high quality 3d printers in the cost range for small businesses.

This is probably the "attack of the killer micros" moment for the additive manufacturing industry.