Slashdot Mirror
Samsung Unveils Galaxy S7, Galaxy S7 Edge and Gear 360 VR Camera (hothardware.com)
MojoKid writes: Samsung held their annual Unpacked event at Mobile World Congress 2016, officially unveiling their next generation Galaxy S7 and Galaxy S7 Edge smartphones. The Galaxy S7 sports a 5.1-inch QHD Super AMOLED display with 2560x1440 resolution, while the Galaxy S7 Edge wields a larger 5.5-inch dual-edge screen also at 2560x1440. Among the new features are the company's always-on display technology. When you pull the Galaxy S7 or Galaxy S7 Edge out of your pocket or purse, you'll be able to peek at basic information like the time, calendar, or notifications without touching or waking the display. Both devices also feature "Dual Pixel" 12MP cameras. Using dual-photodiode technology, this is an alternative to phase-detection auto-focus that's supposed to work faster and better. Samsung also claims the rear shooters on the phones capture 95% more light through a wider f1.7 lens. Both are powered by a Qualcomm Snapdragon 820 processor, 4GB of RAM with 32GB of internal storage which is expandable via microSD, along with 802.11ac MU-MIMO Wi-Fi, BT 4.2, NFC support, fast wireless charging, and 3,000 mAh (Galaxy S7) or 3,600 mAh (Galaxy S7 Edge) batteries. Both are water-resistant and dust-resistant designs with IP68 certification that will withstand total submersion for 30 minutes. The company also announced a new Gear 360 VR video camera and a partnership with Facebook-Oculus. The Gear 360 sports dual fisheye lenses each with high resolution 15MP CMOS image sensors capable of capturing 360-degree video at 3840x1920 and 30-megapixel (7776x3888) still images. When the Gear 360 is synced to a compatible Galaxy phone, you can preview footage in real-time using the phone as a remote.
if I can't change out the battery, I'll use my Note 4 until it dies, then switch to the new LG.
That is incorrect. Since about 2007 the USB spec has allowed for higher charging current. Most modern chargers use that standard. The more expensive ones use dedicated ICs that can detect the type of device connected and go into iPhone mode when required.
Most phones, including all Samsung ones, actually measure the available current. They start at 500mA and ramp up, watching for when the voltage starts to sag. That's the best way to do it - it handles chargers that can supply different amounts of current, and it handles cables that can carry different amounts of current.
If you are having issues you might find it is your cables. The cheap ones tend to have enough resistance to cause voltage sag at relatively low currents.
const int one = 65536; (Silvermoon, Texture.cs)
SJW, n: "Someone I don't like, and by the way I'm a fuckwit" - AC