Slashdot Mirror


Ask Slashdot: Should I Allow A 'Smart TV' To Connect To The Internet?

Slashdot reader GovCheese has a question: I use Roku and also the client apps on my gaming consoles for Amazon and Netflix. But it seems less prudent to allow my television, a Samsung, to connect to the internet. My Phillips Blu-ray wants to connect also. But I'd rather not. Is it illogical to allow Roku and a console to connect to streaming services but prevent a "smart" television from doing so?
Slashdot reader gurps_npc argues there's a distinction between devices that need internet access and devices that want it, adding "Smart TVs overcharge in privacy invasion for the minimal advantages they offer."

Leave your own best answers in the comments. Should you let a smart TV connect to the internet?

24 of 299 comments (clear)

  1. Firmware updates by mdsharpe · · Score: 5, Interesting

    Pretty much the only reason I let my "smart" TV connect to the Internet is for firmware updates. Don't think I've had one in a while though now so assuming they've stopped being developed I may disconnect it soon.

    1. Re:Firmware updates by ReneR · · Score: 5, Interesting

      yeah, well, unless it is like a Samsung "smart" tv were they constantly break things with the updates. my farther's one now even reboots every 25 minutes since one of the last updates, and it does not look like there will be another update coming. 2017 - when firmware updates are part of planned obsolescence, on the iOS side, likewise,

    2. Re:Firmware updates by nukenerd · · Score: 4, Insightful

      Pretty much the only reason I let my "smart" TV connect to the Internet is for firmware updates.

      What makes you assume that firmware updates are a good thing? very often they downgrade performance and insert official malware.

    3. Re:Firmware updates by Anonymous Coward · · Score: 5, Interesting

      It is not so much whether to connect your tv or not. Sooner or later the answer to that is likely yes, as features get added, though if you don't need those features now, I'd temporarily connect via a wire during the initial setup for updates, that way it never had your wifi password.

      Long term I'd like to see consumer level gigabit switches/wifi with these options or similar.

      1. Is device an IoT device? (As opposed to a general purpose pc/tablet)
      2. Select device type from drop down. Allowed connections will be limited based on device types.
      3. Is device allowed to communicate with other devices on your network?
      4. Alert me when traffic exceeds X bytes per day.
      5. Alert me of suspicious usage patterns.
      6. Is the device connected to a compatible power monitoring outlet? Data will be used to analyze usage patterns.
      7. Are there any times when you expect the device to actually be fully powered down?

      Again, most of these you want auto selected from a device type. The idea is you have a hopefully trusted switch that helps to spy on your own devices to see if they are being bad...

      Of course you have to trust your switch, but at least it is one device rather than the whole set of them.

    4. Re:Firmware updates by WaffleMonster · · Score: 4, Informative

      Pretty much the only reason I let my "smart" TV connect to the Internet is for firmware updates. Don't think I've had one in a while though now so assuming they've stopped being developed I may disconnect it soon.

      All are updatable via USB stick.

    5. Re:Firmware updates by HalAtWork · · Score: 4, Informative

      Why even get firmware updates? My TV worked fine out of the box so I've never updated it. I've heard some that did got bricked TVs, and some had ransomware. F that S.

    6. Re:Firmware updates by DCFusor · · Score: 5, Interesting

      The last update my LG got was DRM that made it stop working with my Raspberry Pi and other computer inputs. Can't roll it back. Not quite as bad as Sony, but hey.

      --
      Why guess when you can know? Measure!
    7. Re:Firmware updates by amiga3D · · Score: 4, Insightful

      I take the attitude that if it's working fine then I don't need an update. If it's not broken, don't fix it. Now if you've got an issue with the TV research the problem and if there is a fix you would certainly want to download it. Other than that though, why bother?

    8. Re:Firmware updates by Dutch+Gun · · Score: 4, Insightful

      I don't even bother with firmware updates. My TV needs only display an HDMI signal, and *nothing more*. If it can't do that properly out of the box, then WTF. I'm more worried about updates breaking something that's currently working, or adding some crapware or spyware that I can't remove. It's kind of a sad state.

      I have videogame consoles that work well as media players. I know they'll be kept up to date for a reasonable lifetime, at least, and they seem far less likely to have hidden spyware or security vulnerabilities.

      I know a lot of people say "put them on a separate network", but that's not really practical if you want to allow them access to your media server, for instance. I'd have to end up buying a lot of duplicate hardware to make that work. So, for the moment, I'm simply very judicious about which devices I give my wifi password to. Thank goodness that's still a way to easily control my devices network access.

      --
      Irony: Agile development has too much intertia to be abandoned now.
  2. Blu-Ray yes, Smart TV no by drinkypoo · · Score: 4, Informative

    The Blu-Ray player needs to connect to the internet for updates to be able to play the latest discs. The Smart TV does not, unless you are actually using its "smart" features.

    --
    "You're right," Fisheye says. "I should have set it on 'whip' or 'chop.'"
    1. Re:Blu-Ray yes, Smart TV no by StormReaver · · Score: 5, Insightful

      The Blu-Ray player needs to connect to the internet for updates to be able to play the latest discs.

      That's a good argument for not having a Blu-Ray player, and for using your game console as your player. Frankly, Blu-Ray's hype far exceeds its delivery. Having compared DVD and Blu-Ray side by side, Blu-Ray's improvements are merely marginal at the best of times, and completely insignificant the rest of the time.

    2. Re:Blu-Ray yes, Smart TV no by drinkypoo · · Score: 4, Insightful

      That's a good argument for not having a Blu-Ray player, and for using your game console as your player.

      Except the game consoles spy on you even more than the Blu-Ray player, and are both developed, produced and sold by sleazy corporations with the morals of bedbugs who have been known to distribute malware. (Microsoft is still distributing spyware, disguised as an Operating System.)

      --
      "You're right," Fisheye says. "I should have set it on 'whip' or 'chop.'"
    3. Re:Blu-Ray yes, Smart TV no by techdolphin · · Score: 4, Funny

      Please do not insult bedbugs. They are at least honest about what they are doing.

  3. Spying? by Gaygirlie · · Score: 4, Informative

    Didn't Samsung get caught for their TVs always listening to everything around them, with no permission asked? LG was caught snooping on all files and filenames on the network, if my memory serves. Then there were a couple of others whose names I've already forgotten..Heck, pretty much every TV-manufacturer has gotten caught with their pants down by this point. A Roku is somewhat of a different beasts, because it needs Internet for streaming. I would hazard a guess that they track whatever you do on the Roku-box itself, but may not go to the same lengths as TV-manufacturers do, when it comes to overall spying in general.

    Personally, I would rather give the TV a middle finger than any connectivity, whatsoever.

    1. Re:Spying? by Suki+I · · Score: 5, Insightful

      I wonder if Chinese TVs will have less of that (owing to state controls) -- if true, I might become interested in Chinese TVs.

      ROFL! Chinese TVs with LESS monitoring because of their government? Funniest comment on the intertubez!

  4. Depends on which features you want by Epsillon · · Score: 5, Interesting

    My LG is hardwired. I use its DLNA features but I also block it by MAC from sending any traffic out of the local RFC1918. This obviously isn't going to work if you use the TV's streaming features but for locally hosted content it's ideal.

    As for firmware updates, Samsung's recent brick debacle where it took a technician physically opening the case to get them back pretty much answers that question. The general rule for stuff held in programmable ROM is "if it ain't broke, don't fix it." I understand many will want KRACK fixes for WiFi as soon as they're available, yet I also wouldn't be holding my breath thinking this is a priority for vendors; they have your money, you're on your own. However, if there's a flaw in the monetisation of your viewing habits they'll be jamming those bytes down your digital throat before you can blink.

    --
    Resistance is futile. Reactance buggers it up.
  5. Re:stupidest reason.ever. by Z00L00K · · Score: 5, Insightful

    However with the holes in the firmware that you can find today it might be a good idea to put your entertainment system on a separate subnet at home compared to the other devices - and only open that net when you really need.

    Segmentation of networks is a good security measure these days.

    --
    If builders built buildings the way programmers wrote programs, then the first woodpecker would destroy civilization.
  6. If you need to by GuB-42 · · Score: 5, Insightful

    Does connecting your TV to the internet brings you something?
    - Yes : connect it
    - No : don't
    It's that simple.

    And the fact that you connect a device to the internet (because it is useful for you to do so) doesn't mean you have to connect everything. It is not all or nothing. From a security/privacy perspective you want to keep your attack surface as small as possible, but it doesn't mean you need to completely wall yourself in unless you have more to hide than normal people.

  7. Software updates only by Drakonblayde · · Score: 4, Interesting

    I just recently bought a pair of 55in Samsung Smart TVs

    They each connected to the internet once for firmware updates, and were immediately disconnected afterwards. Unless there's a problem that requires me to update their firmware again, they won't ever be connected again.

    All of the apps that the TV offers are already present on my Roku's and quite franky, the Roku's do it better

  8. Do you know your device? by Dystopian+Rebel · · Score: 5, Insightful

    Do you know your device?

    Do not let anything connect to the Internet if you don't know why it should.

    --
    Rich And Stupid is not so bad as Working For Rich And Stupid.
  9. Have two networks at home. by upuv · · Score: 4, Interesting

    In my home I implement two different networks. Each with it's own gate way. Now this requires more than your average level of IT skills in the home.

    One network is for what I will call class one devices. These are devices that I specifically add to the it. These will be things like computers, tablets, gaming and phones. The second network and the default network is for every other device. Now this requires me actually promote devices the class one network. Typically be mac address.

    Thus all those pesky iot devices end up in the default network. The default network is blocked from the internet.

    Note a device that runs something like pfsense will do the job. There are lots of alternative setups.

    Now. I can also tailor each device in each network to have slightly different network privileges than the each networks default. Example would be a security camera uploading data to my private cloud storage. But I also block all DNS resolution of add servers and malware end points etc in my class one network.

    This is not something a regular I know how to turn on my laptop kinda person can do. This requires a reasonable amount of automated scripting, network monitoring and pro-active tuning as situations change. However it can all be done rather cheaply with couple hundred dollar pfsense box installed between the internet modem->pfsense->router(wifi).

    So yeah I block everything. I only enable access when required and even then I can make it temporary. The more IOT crap that ends up in the house the more this setup is saving my backside.

    ( Note: I don't use pfsense I implemented all the services I need from pfsense myself in VM's. But it's basically the same thing. )

  10. Re:stupidest reason.ever. by AmiMoJo · · Score: 5, Interesting

    Came here to say the same thing. Create a separate, isolated network for your TVs. Avoid ones with cameras and microphones. Job done.

    --
    const int one = 65536; (Silvermoon, Texture.cs)
    SJW, n: "Someone I don't like, and by the way I'm a fuckwit" - AC
  11. Re:Why not? Explain the harm to me. by PPH · · Score: 5, Insightful

    Botnets.

    --
    Have gnu, will travel.
  12. Re:stupidest reason.ever. by HermMunster · · Score: 5, Interesting

    I run the pihole software on an early raspberry pi.

    This allowed me to watch dns activity. With what I saw, which was the tv constantly accessing certain addresses, I blocked those addresses with the blacklist feature of the pihole.

    This allows me to use things like netflix, etc while keeping the data collection to a minimum. This allows me to get updates to the tv's firmware while terminating the tracking and spying on my daily activity.

    The pihole can be used for a lot of other reasons too.

    --
    You can lead a man with reason but you can't make him think.