I agree completely. I often carry a DSLR and a film body and use both. With the DSLR I snap away and maybe get occasional good results. I have much more consistently good results with the film camera.
The downside, though, is that I take less "risky" shots with film. Sometimes I get great results with the digital camera that I wouldn't have taken if I was worried about wasting frames. It's nice to be able to check a picture and its focus and readjust if needed.
The HP 50g fixes this problem and while it isn't quite like the HP calculators of old it is a very good machine. It has an odd and sometimes inconsistent interface and poor documentation, but the TI-89 suffers from similar problems.
Steel structural design involves plugging in information into very long formulas with lots of constants - I found that when using RPN I took about half the time that my classmates with TI calculators did and got always got the correct answer while they invariably made typing errors.
Sound absorbing materials in the receiving room (his dorm room) can help lower the apparent level a bit in rooms that are already reverberant. The unwanted sound enters the room and bounces around a bit, which makes it sound louder. If you make the walls sound absorbing, it will reduce the amount of time the sound will be bouncing back and forth and it will sound softer.
Dorm rooms, however, are so small that they have very low reverberation times (which depends on the total volume and total absorption of the room). Adding more absorption is unlikely to lower that time very much - it may not even be audible. Therefore, it won't do much to help.
Also, most affordable wall treatments like those used in recording studios are totally incorrect for a dormitory, which is a completely different occupancy classification under the building code and must be much more fireproof. Foam and most carpets burn really well. No one cares if you burn down your own home studio - but in an multi-story residential or assembly space ends up with the Station Nightclub Fire.
You are right about blocking the sound getting through. Sealing the door and windows with a heavy material could help stop sound leaks - places where the vibrating air gets in. A rug in his room won't help much, but one in his upstairs neighbors room could help soften impact noise transmitted through the structure.
The only thing "soundproof foam" is good for is burning down the building and killing everyone in it. There is no such thing as "soundproof foam."
There are basically two ways airborne sound travels between two rooms: 1) air leaks between the rooms. 2) through a mechanism where the sound wiggles the wall surface on one side, which wiggles the surface on the other side and re-transmits the sound back into the air.
You can stop air leaks with attention to detail during construction - the partitions should go all the way up to the ceiling, and the floor and ceiling joints should be caulked. The only way to stop the second problem is making the wall more difficult to wiggle - or increasing it's mass. Most modern dormitories have moved away from concrete and concrete block construction which is much better at stopping sound to a gypsum wall board on metal stud construction, which is lighter and therefore transmits sound much better.
Unless you want to pour a new 6" concrete wall or line the room in thick lead, you are unlikely to be able to stop the sound transmission. Having maintenance seal the door and windows better may help if there is a leak problem. You can tell by listening around the door. If the sound is much louder near the bottom of the door than elsewhere in the room, you've found the leak.
The best way to approach this problem is to go to audiologist and get fitted for custom earplugs. They will make a mold of your ear and send it to a company like http://www.etymotic.com/hp/erme.html. You can select the filter up to a maximum of -25dB over a much more even bandwidth than cheap earplugs. It will likely solve the problem without introducing masking noise willy-nilly.
That being said, a loudspeaker playing white or pink noise could mask the problem, if you don't mind listening to it. I dislike constant noise, but that would be up to you.
If you're hearing "thumping" of footsteps or feeling the noise problem, that's a different ballgame: structure borne transmission. Buy your upstairs neighbors a thick rug so they don't impact the floor as hard or replace the ceiling with something more rigid...
I'm not sure if you're saying that the Minidisc couldn't be slot loaded - it could- or that it didn't take off in cars.
Minidiscs were used heavily by the theater and pro audio industries for years (2010 is when I saw the last Minidisc player in theater racks) because they were so much tougher than a CD and could be edited on the player itself.
CD Players and CDs can't take much abuse. Most of the pro audio playback is now solid state devices (for people who can afford it) or laptops (for lower budget minded folks).
Most wireless microphones operate in the "white space" frequency ranges. The FCC pushed wireless users out of the 698-806 MHz a couple years ago and caused havoc in the theater and concert industries - the small theater I worked for spent over thirty thousand dollars replacing their wireless mics, because it is now illegal to buy, sell, or use a 700 MHz microphone.
I can't imagine what it will be like if they take away all the spectrum. It's hard enough as is to do frequency coordination for twenty or thirty mics that are used in larger productions.
More info here:
http://www.shure.com/americas/news-events/spectrum-issues/white-spaces/index.htm
I work in a theater. We will have to spend between $6,000 and $10,000 to replace wireless microphones in the 700 MHz range, and there's no guarantee the new ones will work anymore, due to interference.
If the deadline was extended, we would be able to use the old microphones for the last show of the year and wait to see what happens during the summer, which is an off season.
I think that DTV is good in the long-term, but they could have done it without screwing over wireless microphone users (a high profile industry-- think of all the rock stars and football stadiums).
MiniDisc is often used in theater because you can edit tracks on the disc without a computer. I use it to make back-up recordings and play sound effects simply because it's easier to use than CDs.
-HD-DVD drives are cheaper to make, owing to the red laser. Incorrect. HD-DVD uses a 405nm laser, which is on the violet end of blue. It's the same laser that Blu-Ray uses.
You can save 1997-2003 format from 2007, but it doesn't do it by default. My school set Word 2007 to save in 1997-2003 by default. It's probably in some obsecure setting, though.
Slashdot Mirror
I agree completely. I often carry a DSLR and a film body and use both. With the DSLR I snap away and maybe get occasional good results. I have much more consistently good results with the film camera. The downside, though, is that I take less "risky" shots with film. Sometimes I get great results with the digital camera that I wouldn't have taken if I was worried about wasting frames. It's nice to be able to check a picture and its focus and readjust if needed.
The HP 50g fixes this problem and while it isn't quite like the HP calculators of old it is a very good machine. It has an odd and sometimes inconsistent interface and poor documentation, but the TI-89 suffers from similar problems. Steel structural design involves plugging in information into very long formulas with lots of constants - I found that when using RPN I took about half the time that my classmates with TI calculators did and got always got the correct answer while they invariably made typing errors.
Dorm rooms, however, are so small that they have very low reverberation times (which depends on the total volume and total absorption of the room). Adding more absorption is unlikely to lower that time very much - it may not even be audible. Therefore, it won't do much to help.
Also, most affordable wall treatments like those used in recording studios are totally incorrect for a dormitory, which is a completely different occupancy classification under the building code and must be much more fireproof. Foam and most carpets burn really well. No one cares if you burn down your own home studio - but in an multi-story residential or assembly space ends up with the Station Nightclub Fire.
You are right about blocking the sound getting through. Sealing the door and windows with a heavy material could help stop sound leaks - places where the vibrating air gets in. A rug in his room won't help much, but one in his upstairs neighbors room could help soften impact noise transmitted through the structure.
There are basically two ways airborne sound travels between two rooms: 1) air leaks between the rooms. 2) through a mechanism where the sound wiggles the wall surface on one side, which wiggles the surface on the other side and re-transmits the sound back into the air.
You can stop air leaks with attention to detail during construction - the partitions should go all the way up to the ceiling, and the floor and ceiling joints should be caulked. The only way to stop the second problem is making the wall more difficult to wiggle - or increasing it's mass. Most modern dormitories have moved away from concrete and concrete block construction which is much better at stopping sound to a gypsum wall board on metal stud construction, which is lighter and therefore transmits sound much better.
Unless you want to pour a new 6" concrete wall or line the room in thick lead, you are unlikely to be able to stop the sound transmission. Having maintenance seal the door and windows better may help if there is a leak problem. You can tell by listening around the door. If the sound is much louder near the bottom of the door than elsewhere in the room, you've found the leak.
The best way to approach this problem is to go to audiologist and get fitted for custom earplugs. They will make a mold of your ear and send it to a company like http://www.etymotic.com/hp/erme.html. You can select the filter up to a maximum of -25dB over a much more even bandwidth than cheap earplugs. It will likely solve the problem without introducing masking noise willy-nilly.
That being said, a loudspeaker playing white or pink noise could mask the problem, if you don't mind listening to it. I dislike constant noise, but that would be up to you.
If you're hearing "thumping" of footsteps or feeling the noise problem, that's a different ballgame: structure borne transmission. Buy your upstairs neighbors a thick rug so they don't impact the floor as hard or replace the ceiling with something more rigid...
I'm not sure if you're saying that the Minidisc couldn't be slot loaded - it could- or that it didn't take off in cars. Minidiscs were used heavily by the theater and pro audio industries for years (2010 is when I saw the last Minidisc player in theater racks) because they were so much tougher than a CD and could be edited on the player itself. CD Players and CDs can't take much abuse. Most of the pro audio playback is now solid state devices (for people who can afford it) or laptops (for lower budget minded folks).
Most wireless microphones operate in the "white space" frequency ranges. The FCC pushed wireless users out of the 698-806 MHz a couple years ago and caused havoc in the theater and concert industries - the small theater I worked for spent over thirty thousand dollars replacing their wireless mics, because it is now illegal to buy, sell, or use a 700 MHz microphone. I can't imagine what it will be like if they take away all the spectrum. It's hard enough as is to do frequency coordination for twenty or thirty mics that are used in larger productions. More info here: http://www.shure.com/americas/news-events/spectrum-issues/white-spaces/index.htm
It on the front page of the New York Times...
I work in a theater. We will have to spend between $6,000 and $10,000 to replace wireless microphones in the 700 MHz range, and there's no guarantee the new ones will work anymore, due to interference. If the deadline was extended, we would be able to use the old microphones for the last show of the year and wait to see what happens during the summer, which is an off season. I think that DTV is good in the long-term, but they could have done it without screwing over wireless microphone users (a high profile industry-- think of all the rock stars and football stadiums).
MiniDisc is often used in theater because you can edit tracks on the disc without a computer. I use it to make back-up recordings and play sound effects simply because it's easier to use than CDs.
Sources: http://www.thelookandsoundofperfect.com/overview.html http://www.steppininit.com/tay/hd_vs_blu-ray/about_hd-dvd.html