Cheap Video Conferencing for Small-to-Medium Sized Corps?
Jason W. asks: "I work for a medium sized company of about 75 employees. A while back I was asked by our CEO to look into a video conferencing solution. I didn't find much information about setting up a system in house except from Real Networks. The problem was, they wanted $10,000 just to start. We even had a sales visit from a consultant who laughed at us when we didn't want to spend $8-10,000. Like I said, we are a medium sized company, but did I mention we are privately owned? $10,000 is WAY to much for us to spend on what would be, new technology for us. I wanted to poll Slashdot readers, and see if they have any experience in this area. As for our needs, I know we would need to talk from Texas to Washington D.C, and to Virginia. Can we do it from our website? Do we have to have hardware 'stations' on each end? What are your thoughts?"
if you're wintel-based, you could set up webcams and MS NetMeeting to accomplish some of this.
"It's a wonderful idea. But it doesn't work." -- Tad Danielewski
Note that the AG uses multicast, which your router or ISP may not support well. Also, there is a bit of a learning curve to put everything together. There are AG vendors if you want to buy a fully supported solution.
-Andrew
"For the Snark was a Boojum, you see." -From the Hunting of the Snark: An Agony in Eight Fits, by Lewis Carroll
We use the Polycom products for providing Interactive TV (ITV) courses to the local school district. The schools use this to allow a class to be offered in another district if needed. We were using a Via (not VIA) product that Lucent discontinued after they bought Via. The Polycom products are very nice in that you can do IP or use leased line to make the calls and vary the channel bandwidth.
Lots of information on video teleconfrence can be found out by searching for ITV.
All these comments and not one FOSS reference?
Here is a duct tape and scripting solution:
Get the software at Open H323.
Setup a dedicated MCU server using the OpenMCU conference server (also on above site). Without an MCU server, you can only have one-on-one video conferences. The MCU server will handle multiple participant video conferences as well as multiple rooms for simultaneous but separate conferences.
Use OpenPhone (also at above site) as the conferencing software. Since this is all standards based, the OpenMCU server should also support Netmeeting, Gnomemeeting etc.
This is Slashdot.. so all the advice is gratis but unreliable! Let us know how it works out!
Adi Gadwale.
PS. I have not been able to get this to work for even a 2 person call - Only one of the parties can hear the audio stream.
Also, there's always MS Netmeeting and a cheap camera.
Prevent email address forgery. Publish SPF records for y