Slashdot Mirror


2003 Amateur Radio Field Day

plcurechax writes "The 2003 ARRL Field Day is this weekend, June 28-29. Beginning 1800 UTC Saturday and ending at 2100 UTC Sunday. Originally started in 1933 as a test of portable amateur radio operating, it has become an annual event that is a mix of contest, emergency prepareness, and a public relations activity. Any geeks interested in learning more about amateur (ham) radio, should find out if there is a local club (in Canada)that will be particulating. Most clubs in USA and Canada will have a station on the air. Visitors welcome."

137 comments

  1. particulating? by TCM · · Score: 0, Offtopic

    I don't get it, you mean participating?

    --
    Of course it runs NetBSD. BTC: 1NT7QvbetmANwaMzhpVL6
    1. Re:particulating? by lordkuri · · Score: 0, Offtopic

      I think he's referring to the little particles of shit that seem to be flying out of everyone's mouth.... ya know.... cause everyone's talkin' shit? (yes, it's explained for the humor impaired, sue me)

      I'm a ham too, so nyah!

      -LK

  2. Radio post! by Pig+Hogger · · Score: 4, Funny

    dit dit daw dit,
    dit dit,
    dit daw dit,
    dit dit dit,
    daw,
    daw dit dit dit daw,
    dit daw dit,
    dit daw,
    daw dit dit,
    dit dit,
    daw daw daw,
    daw dit dit dit daw,
    dit daw daw dit,
    daw daw daw,
    dit dit dit,
    daw,
    daw dit dit dit daw!

    (And now, here is some filler text to avoid the lameness filter. You really don't need to read this as this means nothing at all.)

    1. Re:Radio post! by PD · · Score: 1

      I hope that doesn't say "first post" or something. Translation?

    2. Re:Radio post! by seinman · · Score: 2, Informative

      It says "first radio post."

      I was going to put some morse code here that said "you are a massive loser" to the original poster, but alas, the lameness filter stopped it. I'm too lazy to type out dot and dash.

    3. Re:Radio post! by Anonymous Coward · · Score: 0

      Went to field days in the 1950's as K5HLW, and since I was a kid, could stay up all nite and do that. Yes, we knew how to set up our equipment and make the contacts, and I'm sure the country (USA) was glad we could. Havn't been in Ham Radio since, and I miss it, sure, but now I play with computers and probably will until I'm gone for good.

    4. Re:Radio post! by n9hmg · · Score: 1

      Translation?
      Sure.
      ...and I quote"
      first
      That's all I have to say about that. Now, on to the next item.
      radio
      That's all I have to say about that. Now, on to the next item.
      post
      I doubt that's what he meant, but that's what he said. Some morse input software uses the _BT_ prosign as a space.

  3. Headline? by Anonymous Coward · · Score: 1, Funny

    "Particulating?" Another perfectly cromulent word, is it?

    1. Re:Headline? by Anonymous Coward · · Score: 0

      Finalmente conseguí todos mis números de teléfono en el nuevo no llamo el sistema.

  4. Michael edits again by Anonymous Coward · · Score: 0
    plcurechax writes "The 2003 ARRL Field Day is this weekend, June 28-29. Beginning 1800 UTC Saturday and ending at 2100 UTC Sunday. Originally started in 1933 as a test of portable amateur radio operating, it has become an annual event that is a mix of contest, emergency prepareness, and a public relations activity. Any geeks interested in learning more about amateur (ham) radio, should find out if there is a local club (in Canada)that will be particulating. Most clubs in USA and Canada will have a station on the air. Visitors welcome."

    What exactly are the job requirements to be an editor? Willingness to modbomb anyone you disagree with?

  5. Amateur by Anonymous Coward · · Score: 3, Funny

    Amateur == anyone-thats-not-clearchannel

  6. I was with ya by Anonymous Coward · · Score: 0

    Until the word particulating. Is that some sort of GWB-ism?

    1. Re:I was with ya by stevew · · Score: 1

      Yes it is a GWBism. If it ain't, it ought to be ;-)

      On to FD (which I'll be heading out to in about an hour) The idea is to set up using emergency power and contact as many places as you can. The attempt is to simulate/self-train for emergency operations.

      It turns out to be GREAT fun while getting people to improvise. Murphy tends to come to field day alot. So you get to use your noodle in figuring out how to radiate when Murphy is conspiring against you - kinda like REAL emergencies.

      --
      Have you compiled your kernel today??
  7. North Ottawa (Michigan) Field Day by SagSaw · · Score: 3, Informative

    Anybody interested in amateur radio of field day in the Grand Haven/Spring Lake/Muskegon (Michigan) area can come visit the North Ottawa ARC field day site. It is located at Robbins township park (take 120th 1 mile north of M-45)

    --
    Come test your mettle in the world of Alter Aeon!
    1. Re:North Ottawa (Michigan) Field Day by methangel · · Score: 1

      Wow! I used to live in Grand Haven, MI. I went to Fairy Elementary ... do you ever hit Ray's Hamburgers up or Paf's?

    2. Re:North Ottawa (Michigan) Field Day by SagSaw · · Score: 1

      Actually, I just moved to the Grand Haven area a few weeks ago, so I'm still learning where all the landmarks are.

      --
      Come test your mettle in the world of Alter Aeon!
    3. Re:North Ottawa (Michigan) Field Day by Anonymous Coward · · Score: 0

      That last comment wasn't a troll.
      All the kids in Grand Haven say that
      about Ferry elementary.

  8. The FCC website for prospective hams by zubernerd · · Score: 4, Informative

    Over the past few years the FCC has changed some of the rules and have simplified the code requirements. Check it out at http://wireless.fcc.gov/services/amateur/.

    --
    Accentuate the positive, don't waste your mod points on the negative.
    1. Re:The FCC website for prospective hams by deadsaijinx* · · Score: 1

      the FCC still sux

      --
      YOU SUCK BALLS!
  9. Re:This subject is boooring by Mononoke · · Score: 2, Funny
    Who really gives a fuck about HAM radio anyway? Only people who live in their mom's basements, that's who!
    "Who really gives a fuck about Linux anyway? Only people who live in their mom's basements, that's who!"

    Sound familiar?

    --
    NetInfo connection failed for server 127.0.0.1/local
  10. K2VOA by vees · · Score: 1

    I'll be operating from K2VOA in Piscataway, NJ (usually on 20 meter phone) all weekend. If you happen to make a contact with us, ask if KC2AEI is the operator.

  11. Particulating? by Op7imus_Prim3 · · Score: 1, Funny

    It's only a hobby, really there's no need to go falling to pieces!

  12. Re:Radio post! (Translation) by SagSaw · · Score: 1

    First radio post!

    --
    Come test your mettle in the world of Alter Aeon!
  13. Soon by Anonymous Coward · · Score: 0

    Soon to be shut down by the RIAA, DMCA, Patriot Act, and anything else the FCC controllers can think of. Can't have any non-comglomerate controlled broadcast, nosirrebob.

  14. Re: No *HAM radio is dying trolls? by zubernerd · · Score: 1

    I wonder how long before we see someone modify the *BSD is dying troll for Ham radio... I can see it know "Not OT: *HAM radio is dying..."

    --
    Accentuate the positive, don't waste your mod points on the negative.
  15. LOL by snack · · Score: 1

    As translated
    "FIRSTRADIOPOST"

    Quite clever PigHogger.

    -Tim

    1. Re:LOL by Anonymous Coward · · Score: 0

      Funny, I thought I saw some double-dashes in there, the -...- and I read it as
      FIRST-RADIO-POST

      --... ...--

  16. Ham Radio by brilinux · · Score: 5, Interesting

    Ham Radio is actually one of the origional
    forms of electronics hacking. It is a great
    way for geeks to get involved in the community
    and use some of their own expertice in a great
    service. All you have to do to get a license
    is pass a 35 question test, and you will get a
    callsign from the FCC. If you are not already
    involved, take a look!

    73, DE KG4QXK

    1. Re:Ham Radio by poptones · · Score: 5, Funny

      I just hasn't been the same since they started selling pre-made capacitors. Hell, you can hardly find galena and cat's whiskers anymore! Why, in my day we didn't even have coaxial cable; you licked your fingers and stuck'em in the spark gap to make an antenna, and that's the way we liked it!

    2. Re:Ham Radio by Ramadog · · Score: 3, Interesting
      I just hasn't been the same since they started selling pre-made capacitors. Hell, you can hardly find galena and cat's whiskers anymore! Why, in my day we didn't even have coaxial cable; you licked your fingers and stuck'em in the spark gap to make an antenna, and that's the way we liked it!

      Maybe I missed something but how did this rate interesting? That sound more like a good way of getting rf burns. Even the low power used in 27MHz cb can be enough to give a painfull burn.

      Though in some cases making your own capacitors and inductors is not as silly as it sounds. When building matching circuits for antennas or in some cases high voltage stuff building your own components can be an easy way of getting suitable component values with a high enough voltage rating. For the capacitors I use 2 double sided circuit board that has not been etched yet or short sections of coax. With the coax just keep in mind it has inductance as well as capacitance. For inductors and transformers a suitable guage wire for the application.

    3. Re:Ham Radio by tinguru · · Score: 1
      Maybe I missed something but how did this rate interesting? That sound more like a good way of getting rf burns. Even the low power used in 27MHz cb can be enough to give a painfull burn.

      Maybe I missed something, but how on earth are you going to get a burn from a crystal radio set?

      I think the poster was making reference to an historical era, when transmission of signals via electromangetic spectrum was new, and amatures had to hack around marconi's patents.

    4. Re:Ham Radio by Ramadog · · Score: 1

      Probably where it says spark gap. That gets me thinking of a spark gap transmittor. Thats not a crystal radio set.

  17. Re:If there is... by Anonymous Coward · · Score: 1, Interesting

    Not only that. They are notorious to have bad attitudes. Have ever tried to have a dialog with a ham operator? They will talk, talk, and talk and will never listen to anything you say.

  18. Re:This subject is boooring by MisterFancypants · · Score: 0, Flamebait
    "Who really gives a fuck about Linux anyway? Only people who live in their mom's basements, that's who!"

    I agree completely -- good call.

  19. HAM is fun by swimfastom · · Score: 5, Informative

    Ham radio can be a good time. I will be using my ICOM 28H this weekend in Youngstown, OH. If you are in the area my call sign is KC8UFF. I can always find a nearby repeater when my cell phone can't reach a tower!

    Many people have also used their ham radio's to contact the police when a tornado or other disaster wipes out other means of communication.

    --
    http://tomgould.com/
    1. Re:HAM is fun by swimfastom · · Score: 1

      "Many people have also used their ham radio's to contact..."

      Actually, that is exactly how I meant it. Most people who have a ham license have multiple radios.

      --
      http://tomgould.com/
  20. Near Philadelphia... by MaggieL · · Score: 4, Informative

    Press release

    Members of the Phil-Mont Mobile Radio Club will put their emergency communication skills to the test when they participate in "Field Day" June 28 and 29. The annual preparedness exercise brings together Amateur Radio operators from throughout North and South America who are committed to assisting their communities in the event of a natural or man-made disaster. Field Day is sponsored by the American Radio Relay League (ARRL), the national association for Amateur Radio.

    "Amateur Radio is a lot of fun, but the serious side can't be stressed enough," says Maggie Leber, editor of the PMRC newsletter "The Blurb" and webmistress of the club website at www.phil-mont.org.

    "We can play a vital communications role during emergencies, and events such as Field Day ensure that we're ready to handle any type of disaster. We will provide our own electrical power and operate all kinds of radio communications, everything from Morse code to amateur television and amateur satellite radio. We'll be in direct digital communications with the Montgomerty County Emergency Operations center, and will be able to transmit e-mail and other text message through facilities located there."

    Field Day is designed to test operators' abilities to set up and operate stations in the field under emergency conditions, such as the loss of commercial electricity. During the weekend, radio operators try to contact as many other Field Day stations as possible, simulating the fast on-air skills needed to assist town officials and served agencies during an emergency. Approximately 35,000 Amateur Radio operators across the country participated in last year's event. The first Field Day was held in 1933.

    Ham radio operators typically help with communication during weather-related emergencies such as the devastating tornadoes in the Midwest earlier this spring. But, the need for their services doesn't stop there. A federal grant awarded for emergency communications training in 2002 emphasizes support for ham radio's role in homeland defense.

    PMRC will set up its Field Day stations in Lot #4 at Fort Washington State Park, and will be operating from 2pm Staurday until 2pm Sunday. "We hope that the public will come out and see firsthand what this event--and Amateur Radio--is all about," says Ms. Leber, whose amateur callsign is K3XS.

    Today there are nearly 700,000 Amateur Radio operators in the United States and more than 2.5 million worldwide. Information on how to become involved in Amateur Radio is available from ARRL -- the national association for Amateur Radio, 225 Main Street, Newington, CT 06111 or by calling 1-800-32-NEW HAM. Visit ARRL on the Web at www.arrl.org.

    --
    -=Maggie Leber=-
  21. Kansas City... by RocketScientist · · Score: 3, Informative

    The Clay County club is doing field day near Liberty. Great location, lots of fun.

    Field day is a hoot. If you've got any interest at all in radio, find a local club. You may find a few other linux geeks there also. It's a fun technical hobby. Just ask, maybe GW4PTS sometime.

  22. Man that sucks by Anonymous Coward · · Score: 0

    My phone can make calls waaaay more than 20 meters. Why don't you Amateurs goto a Sprint and get a prophesional PDA-Phone doolygag.

    Or maybe, you have a bad antenna. If your not getting far, try relocating the offending antenna. You people should know all about Part 15 of the FCC rules, right? You realy do have an offending antenna if it only transmitts 20 meters. And what is with metric system being used in the FCC? I mean c'mon, use English feet! :-)

  23. PMRC? by poptones · · Score: 1

    You actually called your radio club PMRC? That's hilarious.

    1. Re:PMRC? by MaggieL · · Score: 1

      Erm...yes. The club was founded in 1949. Google hits that FLA against "Proton Medical Research Center" "Parent's Music Resource Center" and "Powder Metallurgy Research Center". There's also a "Penn-Mar Radio Club" somewhere. I'd venture to guess we were the first to use "PMRC" among that crew.

      Get used to it: it's 2003, the TLA namespace was saturated long ago, and the four-letter acronym space is in danger too...including "For Unlawful Carnal Knowlege".

      I'm a programmer, was once married to a chemist who became a health care practioner, and we were both pilots. Driving down the road, every licence plate we saw had at least one alternative meaning.

      --
      -=Maggie Leber=-
  24. Re:Radio post! First CW grammer Post by Anonymous Coward · · Score: 0

    If your a ham you'll understand this:

    fucking lid, hams don't send BT between words.
    Between sentences yes, but not between words.

  25. I guess my morse is off... by lpret · · Score: 2, Funny
    Ok, I guess I'm a little rusty (good ol' boy scouts):

    ..-. F .. i .-. r ...s -t -...- .-. r .-a -..d ..s ---o -...- .--.p ---o ...s -t -...-

    --
    This is my digital signature. 10011011001
  26. I guess my HTML is off too... by lpret · · Score: 1

    ..-. F .. i .-. r ...s
    -t -...- .-. r .-a
    -..d ..s
    ---o -...- .--.p ---o ...s -t
    -...-

    What is the -...-? I can't remember it and googling doesnt help

    --
    This is my digital signature. 10011011001
    1. Re:I guess my HTML is off too... by ncc74656 · · Score: 1
      What is the -...-? I can't remember it and googling doesnt help

      According to this Morse code table, it means =. I guess it was in there as a space...though AFAIK a space in Morse is represented as just a pause between words (just as youwouldn'trunwordstogetherwhenyouspeakorwrite).

      --
      20 January 2017: the End of an Error.
    2. Re:I guess my HTML is off too... by Stephen+Maturin · · Score: 1

      Its BT... end of a transmission

      --
      Non tam praeclarum est scire Latine, quam turpe nescire
      -- Cicero
  27. Open Source and Ham Radio. Two Great Tastes... by robdeadtech · · Score: 5, Informative
    There are some really great open source/LINUX projects going on in ham radio. Also, there are a LOT of Ham Radio antenna designers/suppliers with great prices on some pretty awesome 802.11x gear. Some sites worth checking out.

    CQiNet - Open Source implementation of Voice over IP (VoIP) software specifically for Ham Radio. Currently there are three popular VoIP packages used by Ham Radio operators, IRLP, ILink and EchoLink. Since none of these packages are open source it is difficult to contribute to the their development and learn from them by studying their source code. Let's face it for many of us Ham Radio is more about playing with technology than it is about yacking on the radio or Internet. (Hmmm... maybe some folks on Slashdot could learn something....)

    Hamsoft - A great HAM/Linux database. (not to be confused with GNU/Linux)

    TAPR! - These geeks will whoop yer ass in a second! A lot of them are commited to open source. They actually help fund HARDWARE projects (we could learn something). Check out their LINUX sig.

    Flex-Radio - An open source software defined radio!

    GnuRadio - Signal Processing in oepn source software

    --
    Heil Sig! -Rob
    1. Re:Open Source and Ham Radio. Two Great Tastes... by pongo000 · · Score: 1

      TAPR! - These geeks will whoop yer ass in a second! A lot of them are commited to open source. They actually help fund HARDWARE projects (we could learn something). Check out their LINUX sig.

      Uh, no. One of the reasons I left the packet scene several years ago is that I couldn't find anybody who wanted to experiment with transfer rates 9600 baud or higher. Everyone was stuck at 1200 baud. Unlike computer modems, the jump to higher transfer rates often requires a substantial investment in hardware upgrades to handle the increased bandwidth of higher transfer rates. 19.6 kb or higher usually requires a jump into the UHF realm, since the lower frequencies don't have the necessary bandwidth allocations.

      I was involved in TAPR at the time, built a few of their 9600 baud modems, but TAPR at the time was stuck as well. A quick review of their site shows they are basically stuck in the same time warp.

      You want to read about some folks that will whoop ass? Check out these guys. They are on the cutting edge of wireless. TAPR is but a candle flickering in a strong wind compared to the GBPPR folks.

    2. Re:Open Source and Ham Radio. Two Great Tastes... by Chanc_Gorkon · · Score: 1

      I disagree with you. TAPR is a GREAT organization that moset hams have heard of. They are also pretty innovative too. The reasons things seem to be stuck at slower speeds is a technical limitation that has not been overcome. the problem wih going faster is it increases the bandwidth of your signal. The faster you go, the wider your signal is. On 2m, 9600 is the limit right now until someone figures what will basically have to be a new mode or maybe a way to compress it all to actually simulate a greater speed with out going faster. Going to higher frequencies like UHF (No problem and it is just as cheap as 2m) is not a problem as most folks have 70 cm gear too. The most common radio sold today has 2m and 70cm on it and usually a dedicated packet port that's 9600 capable. Now the GBPPR folks are working on something entirely different then AX.25 packet. They are altering part 15 devices and using them as part 97 devices. This allows them to use a 1 w amp to increase thier range, but they have to stick to the Amateur Overlap. IN the 2.4 GHz band, that would be 2400 MHz to 2450 MHz. So, while the speeds that GBPPR are faster, what they are using is not what TAPR uses which is AX.25. So, basically you haave 2 groups that do similar things, but they are different missions.

      --

      Gorkman

    3. Re:Open Source and Ham Radio. Two Great Tastes... by Anonymous Coward · · Score: 0

      VoIP over ham radio...

      Now, there's a head scratcher...

      You take your voice, which needs about 1.8-2.2kHz of bandwidth, digitize it into a 56kb/sec data stream, use that to modulate a VHF/UHF+ transmitter which will need about 100kHz channel bandwidth (for FM) to keep Nyquist happy, and then you have to pump it through a huge, expensive antenna array on top of a tall, lightening-, wind- and ice-prone tower to go maybe 200mi/300km before you have to receive it, demodulate it into a bit stream, and then regenerate the signal and retransmit it.

      Please explain why this is more practical than just getting on 75m/40m/20m and using plain old SSB...

      Particularly in an emergency... which is one of the attributes of Field Day - testing/demonstrating the capability to establish communications *anywhere* and *quickly*. Like during severe storms, forest fires, etc., etc.

    4. Re:Open Source and Ham Radio. Two Great Tastes... by NateTech · · Score: 1

      No no no...

      You take your standard FM VHF/UHF/Whatever voice 2-way bandwidth of 5 KHz of bandwidth modulated for voice peaks at around 3.5/4.0 KHz.

      You stuff that into a sound card and a codec like ADPCM (32Kb/sec) or GSM (8-11Kb/s). When you digitize it you do it at a typical rate of 44.1 KHz (typical sound card sampling rate) and THEN stuff it through the CODEC making it much much smaller.

      You pop it out the other side from another PC and sound card, and put it right back into the same 5KHz channel size as before.

      Do you think every cell phone out there uses 200KHz wide channels?

      --
      +++OK ATH
  28. Re:This subject is boooring by Deadstick · · Score: 1

    First we had hams living in Mom's basement; then the real estate industry invented restrictive covenants that ban ham antennas; and now the same demographic is doing Linux downstairs...

    rj

  29. Re:If there is... by allanbjork · · Score: 1

    That's the truth! My girlfriend's grandfather is a ham op, and he tells me the same stories over and over again each time we visit. Can't get a word in edgewise. He's still a cool guy though.

  30. High performance shortwave receiver *in software* by Anonymous Coward · · Score: 2, Informative

    .
    For those who would like to expand their technical horizons, here is a high-performance shortwave receiver that is defined almost entirely in software!

    http://www.nitehawk.com/sm5bsz/linuxdsp/linroot. ht m

    No kidding, it runs under Linux, and it will outperform some of the most expensive shortwave receivers ever built, and it's FREE!

  31. IF I EVER MEET YOU I WILL LICK YOUR ASS!!! by Anonymous Coward · · Score: 0
  32. Re:Check this by Anonymous Coward · · Score: 0

    so is that "antenna" considered right hand circulary polarized?

  33. Ham Radio AND FreeBSD / *BSD Kicks Linux Butt by Anonymous Coward · · Score: 0

    Anti-troll spell cast at the "who cares" crowd.

    All I can say is that I was doing TCP/IP over radio way before twisted pair took over from thick and thin ethernet.

    y0ur s0u1 is 0ur5

    Many wireless advances were spawned out of work done by engineers who also happened to be Hams, or by Hams who happened to be engineers. Packet Radio is but one.

    an old coot of 40 from VE7 land...

    1. Re:Ham Radio AND FreeBSD / *BSD Kicks Linux Butt by mpost4 · · Score: 1

      Question is packet ever used much any more, I live in pittsburgh, I have done some packet work, but I never seam to get any one.

    2. Re:Ham Radio AND FreeBSD / *BSD Kicks Linux Butt by bobwilkins · · Score: 1

      Move your detector to 144.3900 MHz. You might have to enable Linux emulation on your FreeBSD boxen to get your feet wet. Plenty of software to sling your packets around town on the APRS network.

      Most of the FreeBSD users are on 2.4 GHz using 802.11b on channel 6 forming mesh networks.

      k1ooo lotsa dahs

      --
      Bob is at home in the Northeast Kingdom.
    3. Re:Ham Radio AND FreeBSD / *BSD Kicks Linux Butt by mpost4 · · Score: 1

      thanks for the info, but I don't us BSD. But I will have to take a look at that freq.

    4. Re:Ham Radio AND FreeBSD / *BSD Kicks Linux Butt by stevew · · Score: 1

      Ah but did you do it BEFORE or AFTER KA9Q? (Who reads /. I believe.. ;-) If you are a ham involved in the digital world at all - the answer to the above is obvious ;-)

      73 de KA6S

      --
      Have you compiled your kernel today??
  34. Those hams... by presearch · · Score: 1

    ...just have a field day with this stuff.

  35. GOATSE!! by goatse.cx+troll · · Score: 0, Troll

    goatse goatse goatse, goatse goatse! GAPING anus GAPING anus!! lololololol goatse!

  36. It is what you make of it by Anonymous Coward · · Score: 2, Interesting

    ... a chance to learn how to push more buttons and operate more neat-looking equipment full of blinkenlights. A chance to learn how a lot of electronic circuits work. A chance to digitally communicate over thousands of miles with just 4 watts (which you're aware you could do with wires, but that would require the use of a lot more than 4 watts on a complex, expensive carrier network to accomplish the same result). Oh, and you also meet a lot of nice people (and the occaisional troll), and assist others, when you're not talking to people in the space station, sending television signals, or whatever it is you end up doing with ham radio.

    I'm a 26-year-old Extra, which I'll admit is somewhat young for the hobby, but the older folks like me (despite the nose ring) because I posess two very important traits: When I do not know, I say so, and shut up and observe. When I do know, I help. If this sounds like you, you'll make a brilliant amateur radio operator, and you should pursue this license, because after only 35 multiple-choice questions, you are rewarded with a federal license to screw with more stuff.

    For the interested, those 35 questions are divided into 10 objectives, only a few questions on each. And those questions come completely from this question pool (July, 2003 edition), which if you look at for a second, probably doesn't strike you as particularly difficult. The resulting Technician-class license lets you use up to 1500 watts on all amateur bands (VHF, UHF, and beyond) over 50MHz, or more simply, everything but shortwave (HF). That includes talking to astronauts, long-distance 802.11b, packet radio, and a bunch of other things I don't know about, aside from the usual voice communications.

    So, come see us tomorrow, ask a lot of questions, and bring your own station next year instead of just watching.

    1. Re:It is what you make of it by forii · · Score: 1

      I'm a 26-year-old Extra, which I'll admit is somewhat young for the hobby,

      While I'm a 28 year old general class (I think that's what that name is, if they haven't changed it), I haven't actually been active in ham radio for years. Because I got my license when I was 13. Now that was young! Unfortunately I just ended up losing interest to other hobbies, but I still keep my license current with the FCC, and I still have my old 2 meter handheld around here, which I turn on every now and then just to hit a few local repeaters. And I still remember most of my morse code, I had to follow it up to 20wpm at the time, I believe they've removed most of the code requirements now, though, as you probably know.
      Okay, now i sound like an old man. :)
      This is N6RWE, signing off.

  37. Morse Code is being elimanated. by n6jpa · · Score: 3, Informative
    Currently the World Radio Confernce is meeting in Europe and it is removing the morse code test requiremnet from the International Treaty.

    Hopefully in a few months there will be no morse code test at all for ham radio in America. Sadly Morse Code has hampered ham radio growth, almost 33% of todays USA ham radio operators are no code technicians that are restricted to VHF 50 MHz or higher frequencies. With the aboltion of morse code for HF radio tests there could be a increase of ham radio operators of up to 2 million.

    Ham radio isn't just about morse code and voice there are many interesting modes and sadly the FCC and ARRL have discouraged the ham radio hobby by requiring silly morse code tests.

    1. Re:Morse Code is being elimanated. by mpost4 · · Score: 1

      I would avoid HF for the first few years after CW is gone. There will be many older hams that do not want to talk to people that did not have to pass a CW test. I avoid one repeater here in pittsburgh because there are people like that on it. Besides, I never really like HF much, that is why I did not go for the test. I took a CW class, I was doing well, in it, but I was not there because I wanted to be, I felt like I was being forced into the class by some of the hams, so I droped out and never took the test. I was not doing it for me, so I droped it. No reason to waist my time and the money for the test for somehting I did not want.

    2. Re:Morse Code is being elimanated. by Erbo · · Score: 1
      I was dubious when I read this, but a few minutes' searching confirmed the story.

      Of course, "Adoption of the Article 25.5 modification would not mean the immediate disappearance of the Morse requirement to operate on the amateur bands below 30 MHz. Each administration, including the FCC if it chooses to do so, would decide whether to drop the requirement from its domestic regulations." (quote from the arrl.org article) Theoretically, the FCC could decide to keep the existing 5 wpm Morse requirement...and they do have more important things to do than fiddle with the amateur licensing requirements, so it could take a while. But it would be good news, if it comes to pass.

      --
      Be who you are...and be it in style!
    3. Re:Morse Code is being elimanated. by mpost4 · · Score: 1

      check this artical out over at qrz http://www.qrz.com/cgi-bin/ikonboard.cgi?act=ST&f= 3&t=38156 it looks like Britain has alread killed cw.

    4. Re:Morse Code is being elimanated. by Erbo · · Score: 1
      Hmm...that's not how I read it. It looks like the Brits are drafting the legislation that will kill the Morse requirement for HF access, once the WRC has changed the international treaty to allow them to do so. Which means they'll likely be the first nation to drop the requirement, but they just can't do it yet, until the changes are approved (a couple weeks from now at most, if I read the other article correctly). That qrz.com posting also said that, in Australia, they might not be able to drop the requirement until early 2005. As for the FCC, who knows when they'll feel inclined to take up the matter? And naturally, there will be lengthy comment periods and reviews before they take action...

      Morse code requirements are definitely one of the major "hot button" issues for hams everywhere. On one side, we have organizations like No-Code International that work to eliminate the requirements (Bruce Perens, of Debian and other Linux fame, is heavily involved with them), and, on the other side, organizations like FISTS are working to preserve the knowledge and use of CW.

      For any computer geeks that have no idea what I just said, think of it as being the ham equivalent of Unix vs. Windows, or vi vs. Emacs, or Windows vs. Macintosh.

      --
      Be who you are...and be it in style!
    5. Re:Morse Code is being elimanated. by mpost4 · · Score: 1

      First, maybe I miss read it, you probably are right.

      Second I love your comparison at the end, the sad part is it is probably more heated then those.

      but for me I don't care either way, I have done some HF work at the club I am a member of (club has a extra class call, and there are usually extras there) I just did not enjoy HF work. For now I think I will stay on UHF/VHF for the most part. Now just watch the HF vs. UHF/VHF fight start here.

    6. Re:Morse Code is being elimanated. by DF5JT · · Score: 1

      "With the aboltion of morse code for HF radio tests there could be a increase of ham radio operators of up to 2 million."

      Ain't that cool?

      Nope, it's not.

      Morse code is the one single thing in ham radio that makes it unique. Anything else, be it packet radio, Digital TV, VOIP etc. can be done without ham radio, if you are of the technically inclined mind.

      The constant whining of the no-code fraction in the end is just as lame as the windows whiners (who are in the majority) who want everything and anything everywhere at no cost and no effort.

      Why bother with a hobby that doesn't interest you enough to put some effort into learning the one mode that sets it apart from the instantaneous communication world you have already available with a telephone and high speed internet access?

      The growth you want has already lead to an AOLization of the airwaves (on the VHF-no-code-bands) and it will get worse once you have people who get their ham ticket as easily as a drivers license.

      "Ham radio isn't just about morse code"

      Yes it is. Where else would you fid morse code?

      Lowering requiremets is a nasty trend that in the end leads to lower standards. What's next? Getting into Harvard and Stanford with a 35 questions multiple choice test?

    7. Re:Morse Code is being elimanated. by mpost4 · · Score: 1

      You can do CW over the net. and as for it being only about CW, no ham radio is not about only CW, it is a hobby, there are many areas one can play with in ham radio, CW is only one part. many people like just phone, others will play with ATV slow scan, packet (well that seams to be hard to find these days) For some thing to be just about one thing, that one thing must take up the majority of the hobby. Last I checked CW was not that big in ham radio, I admit many love it and a few will only do CW, but it does not take up the majority of ham radio. And VHF and UHF is not like what you are trying to say it it.

    8. Re:Morse Code is being elimanated. by Anonymous Coward · · Score: 0
      The constant whining of the no-code fraction in the end is just as lame as the windows whiners (who are in the majority) who want everything and anything everywhere at no cost and no effort.

      I hear this argument all the time. It goes something like this: 'Without morse code, HAM radio will will be full of the unwashed masses. We need this hurdle to keep out the rabble'.

      I don't buy this. Yes, I do believe there should be requirements. But to keep the hobby up with the times, these requirements should be of an electronics/technical nature. I.e. Have a hurdle to clear, but rather than the hurdle be an antique one, make it more applicable. I have my advanced ticket (digital too), but refuse to take the code test. Hopefully they remove the code requirement before the hobby dies and they take back the bands.

    9. Re:Morse Code is being elimanated. by Anonymous Coward · · Score: 0

      Sorry, but our hobby will be dead in a few years anyway.

      Very, very few people care about the code and all of them are cragely old men who will be dead in a few years (coincedently at the same time amateur radio dies).

      Personally I think the CW requirements are stupid. Yes, I've passed all by CW tests because they were a requirement 15 years ago. And yes, even back then I thought the whole code requirement was stupid.

      Just because there is no code requirement does not mean nobody will use it. If the code interests you (and many new hams like it) then you will learn and use it. Otherwise it just prevents a whole lot of new people from joining the hobby. Hence the reason why amateur radio will be dead soon.

      I mean, it used to be that the big allure to ham radio was the ability to talk to anyone in the world. Now, with the Internet, anyone can do it and not have to pass some silly CW test. Plus there are a hell of a lot more people on the Internet than on the radio and the Internet (when running) is a hell of a lot more reliable than the radio (over long distances).

    10. Re:Morse Code is being elimanated. by Anonymous Coward · · Score: 0

      Well, I just hope that it will continue to be legal to use Morse code. That way, if I want to have a nice CW QSO and stay away from the riff-raff, I can.

      And, when the codeless newbies start scratching their heads wondering how the hell the real hams work all those grid squares on 2, 222, 432 and up, they might figure out the relationship between bandwidth and noise figure. My best DX on 2m has been obtained by using CW during an auroral opening.

      Back in the late 60's and early 70's, I remember that Japan had opened up parts of 10 and 15 for voice operation by their Novices, and those segments were totally saturated and unusable. It's going to be an interesting challenge in the next few years, what with all of the digital stuff being used and developed.

      But, I just hope something can be done about 40 first. It would be a great band to run mobile on, if it weren't for the broadcasters.

    11. Re:Morse Code is being elimanated. by SWTP_OS9 · · Score: 1

      One of the reason to keep CW is that under conditions a CW signal will go father than a voice signal. Remember that part of the Amature service is to supply communication in a disaster or problem situation.

      And before some one says packet etc remember CW is simply keying a transmiter on and off and listing for a change in signal on the receiver end. Packet, tty requires a bit more in equipment that could go wrong or be unavaiable when really needed. Its one extra option of moving a message.
      And I wont get into the major loss of communication including data when NY loss their two big cell tower a few years ago killing wireless communication in a huge area for a while. The more complex the easer to toss a monkey wrench into the works.

    12. Re:Morse Code is being elimanated. by phylus · · Score: 1

      While I might be inclined to agree, morse code really isn't that hard.

      I picked up 5 WPM code in about 2 days. It's so simple it's amazing. If anything, you can memorize the alphabet, just write down what you hear, and translate later... because it's just so slow.

      There are whole bands that are CW only, so unless the also relicense them for voice it would be silly to not require CW. CW is very effective when no voice signal can get through either. If you have a one watt transmitter and you're trapped in a strange area, you may only be getting a broken carrier across, but that's enough for code. Plus code takes so much less bandwidth (a precious commodity) than voice or packet or any other kind of transmission.

      The Technician class is saving amateur radio, and if anyone really enjoys it and wants HF, they'll put forth the little effort that is required to learn CW.

      I got my license when I was 10 years old back in 1994, and no one in my family was a ham or anytihng. I just did it because I enjoyed it.
      I stopped going to the local club meetings when people like you would start arguments with the obstinant old people about code requirements. It wasn't fun anymore. If an 11 year old (when I got General) can learn 13 WPM code, then so can a 35 year old! So shut up and get your key.

    13. Re:Morse Code is being elimanated. by pyser · · Score: 1

      The Morse requirement is not a serious impediment to growth in the ham ranks, as we know with the success of the no-code technician license. Furthermore, five words per minute is so simple to learn and pass that anyone who wants to can pass it. You can practically look it up as it's sent at that slow speed. Kids as young as seven and eight routinely pass the 5wpm test; I've even worked a 10-year-old Extra.

      True, ham radio isn't just about Morse, but when all else fails (hey, that sounds familiar), you can get a message through using it.

    14. Re:Morse Code is being elimanated. by pyser · · Score: 1

      Last I checked CW was not that big in ham radio

      At least tonight it is ... just check out 40 meters. Wall to wall signals for 50 kHz. 40 CW is almost always hopping, as is 30 meters.

      CW and other digital modes will be of greater importance during the coming downturn in the solar cycle, when poor propogation makes SSB transmission difficult.

    15. Re:Morse Code is being elimanated. by starbuck5250 · · Score: 1

      One of the reason to keep CW is that under conditions a CW signal will go father than a voice signal.

      Exactly why microwavelength experimenters/contesters use CW instead of voice. I can make a contact using CW easily when conditions are too poor for voice to get through. Rainscatter is very cool.

      More recently, computers have been used to work high speed meteor scatter contacts with CW. Although each meteor only leaves a brief ionised trail behind, the accumulated numbers of those trails makes reliable communications possible.

      73 de KC2HIZ

  38. 'ham' is not an acronym by pyser · · Score: 1

    Not anymore, anyway. According to most interpretations, the letters don't stand for anything so don't write it in all caps! The actual origin of the term 'ham' has been lost to history.

    And true, ham radio is not dying. (It could be, though, without younger people getting interested and bringing in the new technology.) This weekend should be a fine example.

    -- Me, still wondering why the /. eds don't like me, since I posted the same topic three days ago and was rejected.

    1. Re:'ham' is not an acronym by Anonymous Coward · · Score: 0

      "Ham" is short for amateur, and that's not been lost to history - it's in the ARRL Radio Handbook, as well as many other books about amateur radio.

      I suspect a Google search might yield something, but so would a trip to the library or visiting a local amateur radio club.

  39. Re:If there is... by Anonymous Coward · · Score: 0

    So what...this is your way of getting even?

  40. W0YC by SuperQ · · Score: 1

    the University of Minnesota Ham club will be runing our field day on a 3000W generator we're borrowing from an ISP... we've got a 1500W amplifier for our HF rig, now all we need to do is find a nice big tent to tx from because weather reports say it's supposed to thunderstorm in the morning.. bleh!

    if you're in minnesota, check out our web page, http://w0yc.umn.edu

    -KC0NBY

    1. Re:W0YC by Combo5 · · Score: 1

      Band Captains Please Note The Transmit output power at the input of the antenna connector shall not exceed 150 Watts when the transmitted un-modulated carrier is keyed in the CW mode for all mode operations.

    2. Re:W0YC by SuperQ · · Score: 1

      that is for low power stations..

      1.3. The total transmitter output power per band for any high power entry in any category for an ARRL Contest is either 1500 Watts PEP or the maximum allowable power level established by the national licensing authority of your country, whichever is lower.

      http://www.arrl.org/contests/announcements/rules -h f.html

  41. Dude... by poptones · · Score: 1

    Apparently you ain't been to Dayton. I never encountered any bad attitudes there... not even at 4AM on a beer crawl. FUBAR!

  42. Re:Check this by Anonymous Coward · · Score: 0

    so is that "antenna" considered right hand circulary polarized?

    I *believe its more of a RDF.

    *believe - used in context whereas without knowledge I make a statment.

  43. fun by mpost4 · · Score: 1

    I am so looking forward to this years feild day, I will be going to the feild day of my old collage ham club, W3YI. we are going up to the mountins of western PA for it, that should give us some good propigation. I probably see if I can get some 2m FM contacts. I know what some of the others hams are saying 2M? well I like 2m and 70cm alot, and I feel that I can try it, there is no rules against it, I know I will not get my club many points, but we are not doing it just for the points, we are just doing it for the fun of it. I be leaving Oakland (just out side of Pittsburgh) after I get off work and head up (that will be around 8am) Well 73 to all the hams here.

    The reason I am doing it with my old friends from pitt, is because last year I did it with my current club (w3wkh) and all they cared about was the contacts and points, I want to have fun, is that not part of what feild day is about, a day where we can have some fun while practising emergancy comunications.

  44. Who modded this up? by Anonymous Coward · · Score: 0

    Are you mad?

    The ARRL or FCC do not control what you can do on the airwaves. This is as pointless as a breathalizer on a steering wheel; a drunk man can fool the device by shoving the breathalizer up his ass.

    Why is it difficult for your skull to retain the knowledge that God lets you do whatever you want on God's radio waves? Sure, orderly communication is a good thing, but the FCC is in complete violation of Freedom of Speach and Freedom of Expression. And don't tell us we don't have a right shout at you as loud as possible from far away! The law is a personal relationship between you and the law; not to be construed to be effective on others outside of your body. This rule defines the separation of Churches and States.

    1. Re:Who modded this up? by mpost4 · · Score: 1

      The FCC exists because there is limited spectrum. And they must protect it for every one. How would you like it if some one near where you lived decided to flood the air waves on every band with so much noise that none of your wireless devices would be able to connect. No the FCC needs to be in place. They are not there to prevent free speech, but there to facilitate it, how would you like it if some one you really like was on TV, and some who did not like them went to the stations location and start flooding the air on the stations freq with noise, so you could not hear what the person on the air had to say.

  45. Come visit WVARA if you're near Silicon Valley by ikluft · · Score: 1
    I'm posting this from the Field Day site of the West Valley Amateur Radio Association. We've set up about 12 radio stations on a ridgetop near the peak of Loma Prieta, in the Santa Cruz Mountains. Visitors are welcome through the event, which ends Sunday at 11AM. See WVARA's web site for more info and directions. Or if you're on the air, we'll be using the club callsign W6PIY.

    Emergency coordinators may take an interest in one thing we've done. We use a single generator to power our entire site. Using experience from the construction industry, some of our members knew that most equipment rental shops have large generators and transformers that can be used to step down to 120AC. So we use a transformer near each cluster of station tents to build our own little power grid for the site.

    And something just for the Silicon Valley touch, I guess I should mention how I'm on the web from my station tent. We have a data network across the site with a fiber backbone. Yes, we've implemented "fiber to the tent" for a weekend event, for the third year in a row. Though it's easy to just say a member picked up the fiber hubs at a dot-com surplus, there's more to it. When we first started experimenting with networking the site, we discovered that Cat5 ethernet cables longer than 6 feet interferes with and accepts interference from 10m amateur radios. So fiber was the only way to do a site-wide network, Come and take a look!

    1. Re:Come visit WVARA if you're near Silicon Valley by Anonymous Coward · · Score: 0

      I'm in a different tent up here. . . With the fiber hub. So be nice ikluft, or I'll disconnect you!

    2. Re:Come visit WVARA if you're near Silicon Valley by ikluft · · Score: 1
      So much for anonymous. :-) I know which tent has the fiber hub.

      Yeah, he's kidding around obviously. This is a fun accomplishment to put the fiber network up and connect all the station tents. Some of the network installation is done by teens, which provides a great learning opportunity for them.

  46. Yea, but... by Anonymous Coward · · Score: 0

    Does the modem interface to HPIB?
    True scientists use HPIB, not the RS232/RS422/USB/Firewire neanderthal crud.

  47. Northern Los Angeles County Field Day by hypertex · · Score: 1

    Anybody interested in amateur radio field day is welcome to join the Santa Clarita ARC in Valencia near Magic Mountain. It is located at the Castaic Lake Water District on Bouquet Cyn. For directions go to www.w6jw.org
    CUL OM de KC6WGR

  48. Ham radio, so retro by Animats · · Score: 1

    Ah, ham radio. It hasn't been the same since the old guys retired their Vibroplexes.

    1. Re:Ham radio, so retro by DF5JT · · Score: 1

      "Ah, ham radio. It hasn't been the same since the old guys retired their Vibroplexes."

      True. The old guys use Schurr paddles today.

      http://www.mtechnologies.com/schurr/

  49. Re:This subject is boooring by mpost4 · · Score: 2, Informative

    and these "covenants" are considered illegal by the FCC, if you own a home, you can put antennas up, or an antenna tower. check out this page from the arrl http://www.arrl.org/FandES/field/regulations/anten na-restrictions.html

  50. Re:High performance shortwave receiver *in softwar by Anonymous Coward · · Score: 0

    SM5 BSZ would be: Leif Asbrink, a Swedish Amateur Radio Operator

  51. Amateur radio == Teh dead hobby by Cthefuture · · Score: 1

    Just look at the number of comments on this thread. Nobody cares.

    The Internet killed amateur radio, it's that simple. You can more easily (no skill needed) talk to more people than were ever on the radio.

    Yes, I'm a ham (extra for more than 10 years) and I think the no-code technician license should give you full privileges (same as extra). In other words, I think there should only be one ham license class. That might save the hobby.

    And shut up all you old whiners about the degradation from n00bs, you'll be dead soon anyway. The quality of the operators won't matter one lick when there's no one on the air anyway.

    --
    The ratio of people to cake is too big
    1. Re:Amateur radio == Teh dead hobby by Anonymous Coward · · Score: 0

      Somebody please mod parent down. "Teh" guy is a troll.

    2. Re:Amateur radio == Teh dead hobby by pyser · · Score: 1

      The Internet killed amateur radio, it's that simple. You can more easily (no skill needed) talk to more people than were ever on the radio.

      Just talking to people isn't the point. You can punch a few buttons on your wireless phone and call any telephone in the world.

      Talking to people, with absolutely nothing between you and them, is what it's all about. With other modes, there is a massive infrastructure between you and the other person. With radio, it's you and your rig and antenna, and the other person and her rig and antenna, and nothing in between but the "ether", and your mastery of how to work that "ether" to make that contact.

  52. Re:Amateur radio == dead hobby?? I don't think so! by W2IRT · · Score: 1

    Just look at the number of comments on this thread. Nobody cares.

    The Internet killed amateur radio, it's that simple. You can more easily (no skill needed) talk to more people than were ever on the radio


    Killed amateur radio? Not hardly. New licensees are are increasing at a greater rate than SK's and non-renewals combined. At least that's what the FCC's numbers say, as well as Industry Canada and from what I saw in an RSGB item last year, the same in the U.K.

    Take a listen across those few HF bands that have propagation this weekend and see just how "dead" ham radio has become. Take a listen during any of the big contests -- and just *try* to hold a QSO on the top fringe of 20 Meters during CQWW.

    Tune PSK-31 on 14.070 some evening and try to find a little sliver of the band to get in on. Listen to most big-city 2M/450 repeaters during rush hours.

    Go have a listen to 75 at night. Sure, it's the GallBladder Network most of the time, but still...it's a pretty full spectrum most evenings.

    Next time (if only) a P5, KP1, KP5 or VU7 shows up on HF take a spin across the band and see how "dead" the hobby is. I *still* can't bust the Iraq or Afghanistan pileups when those entities show up.

    Go to Dayton next year and tell me how dead the hobby is. Granted, attendance is down a bit, but still, 25,000 hams at one show ain't a bad gathering.

    The hobby is what you make it. I've just finished DXCC on three bands in the last 2 years with 100W and a dipole. I'm now getting back into VHF, since the solar cycle is on the wain, and I'll try 40 and 80M DXing this coming winter. I just got hooked on PSK and RTTY, and can't wait to play with SSTV a bit more. Oh, but wait...I don't like CW so I can't be a real ham. Sorry, never mind. :-)

    If you're in NYC and want to have some fun this weekend, check out the Hall of Scinece club's fun field-day station in the hall's back parking lot. If you hear us on the air, please listen for WB2JSM and say hi -- and ask if W2IRT's at the mic! 5-9 NLI!

    --
    Cheers, Peter, W2IRT
  53. Field Day in Ames, IA by matgyver · · Score: 3, Informative

    If you are in central Iowa, we are having Field Day at the Red Cross in downtown Ames, IA as a 3F station. This is a joint operation between the ISU radio club (CARC) and the Story county radio club (SCARC).

    Good luck!

    73's

  54. Re:ham radio sucks by Anonymous Coward · · Score: 0

    The troll has obviously NEVER been a ham.

  55. Re:Amateur radio == Teh dead hobby? Maybe not by Anonymous Coward · · Score: 0

    Although I agree with what you're saying, I think ham radio has advantages over the internet, thus it could have a new life if ham operators would start advertising as such.

    For just gabbing, although others can listen to your conversation, at least noone is saving or tracking what you're clicking or typing.

    More importantly, because radio can send data, it can be used where the internet won't go (far at least). Two things that come to mind are video links for remote controlled planes or do it yourself space exploration and many other projects I haven't thought of at this moment.

  56. Re:This subject is boooring by Deadstick · · Score: 1

    The FCC preempted ZONING restrictions, not covenants. Covenants are a contractual issue over which the FCC has no control. If you bought a house with a no-antenna covenant, you signed a contract not to erect an antenna.

    Congress preempted covenants against TV and DBS antennas in the Telecommunications Act of 1996, but it ignored amateur radio because the same voters who want TV antennas don't want ham antennas next door. The ARRL campaigns for relief, but good luck.

    rj NY0F

  57. Plano Amateur Radio Club Field Day by eap · · Score: 1

    The Plano Texas Amateur Radio club is having field day this weekend at Hoblitzelle park in Plano.

    There will be lots of interesting equipment and modes, including packet radio.

    There will also be barbeque. Come check it out. Details available at the PARK website.

  58. Re:This subject is boooring by mpost4 · · Score: 1

    I have heard of people takeing it to court and winning.

  59. W5DDL by Subnirvana337 · · Score: 2, Informative

    If anyone on Slashdot is in the Lafayette/Rayne, Louisiana area, AARA (Lafayette amature radio club) will be celebrating field day in Rayne, at the Civic center. Directions can be found on www.w5ddl.org

    Myself, I'm going to work as many PSK31 contacts as possible, our mobile opperations van and 100 foot trailer tower will do just fine...although, i could get extra points for opperating QRP, 20 meters will be probably be pretty crowded...

    Happy Field day to all!

    Mike
    KD5UTQ

  60. let's hear it for wireless by Anonymous Coward · · Score: 0

    Three dits, four dits, two dits, dah! Radio! Radio! Rah! Rah! Rah!

    1. Re:let's hear it for wireless by Dunarie · · Score: 1

      I don't know about everyone else, but the local repeaters here are getting more and more active, rather than less, though the nets don't get much turn out. I've had my license since I was 12, and am 17 now, a Tech. I would have loved to have joined the SARA/Nanticoke(SP?) clubs for their field day this year, as I have done for serveral years, but I just have too much work to do. I'm not the most active ham, but once I get off my ass and learn code, I plan on getting on HF a lot (I passed the general writen, now just need to learn code and pass the code test).

      Seven Three
      N3WAU *starts to drool again from thinking about the new QSL.net setup

  61. NBC11 TV News is here by ikluft · · Score: 1

    The Bay Area's NBC11 (KNTV) News is here planning to do a live shot from our Field Day site during the 5PM newscast.

  62. NBC11 TV News aired us live at 5PM by ikluft · · Score: 1

    I heard that NBC took some of the video for national distribution. But they have no way to know which local affiliates will choose to air it.

    1. Re:NBC11 TV News aired us live at 5PM by Typoboy · · Score: 1

      Maybe it'll show again at 11pm. It was a well done story- it emphasized how FD is an emergency preparedness event, besides being a lot of fun and a great way for folks to learn about the hobby.

  63. PRB-1 does *NOT* preempt restrictive covenants by lovelace · · Score: 1
    What you've heard is people taking local governments to court and winning. Restrictive covenents are still valid and can cover ham radio antennas. Even under PRB-1 (the FCC ruling that requires local, state, and federal governments to reasonably accomodate ham radio) you aren't guaranteed to be able to do whatever you want (especially, for instance, if you want to put up a large tower at the end of a runway).

    I recently bought a house and since there weren't many houses available without restrictive covenents I did a lot of research about this. There is movement in congress to apply PRB-1 to restrictive covenents (which, again, would not allow everything, but rather make homeowners associations reasonably accomodate and not outright ban), but nothing has passed yet.

    If you had actually read the URL you posted you would have realized this.

  64. Pics by mpost4 · · Score: 1

    Pictures from my day at feild day http://members.bellatlantic.net/~vze3sxhy/FD2003/f ield_day_2003_for_w3yi.htm
    this is only the second year that we have done a field day. It was alot of fun, I wish I was still there but I had to work tonight so, I had to leave early.

  65. As usual, Field Day gets all the glory... by NateTech · · Score: 1

    And the other (harder and more geeky) contests/events are ignored.

    Here's a good one...
    http://www.arrl.org/contests/rules/2003/10 -ghz.htm l [10 GHz and up contest] - try doing THAT with your Pringles Can antenna (hint: Leave the pringles can at home in the garbage and get a real dish.)

    Or maybe a little more realistic...

    http://www.arrl.org/contests/rules/2003/june-vhf .h tml [June VHF QSO Party] - put a whole crapload of directional antennas up on bands that are supposed to be "local" communications bands and then talk hundreds of miles away on them.

    The highly technical contests are in need of more geeks in most areas of the country. Field Day is fun, but not nearly as challenging (unless you keep spilling your beer) as the VHF and up contests that never make Slashdot.

    Satellites, super-low-power repetitive digital modes (Amateurs are confirming moon-bounce "satellite" contacts with minimal gear on UHF and EXCELLENT DSP processing in PC's now), and the highly technical stuff never gets the accolades or the press -- but it's all WAY better than Field Day.

    73 DE WY0X

    --
    +++OK ATH