Turning Heat Into Sound Into Electricity

WrongSizeGlass writes "Science Daily is reporting on work by physicists at the University of Utah who have developed small devices that turn heat into sound and then into electricity. 'We are converting waste heat to electricity in an efficient, simple way by using sound [...] It is a new source of renewable energy from waste heat.' They report that technology holds promise for changing waste heat into electricity, harnessing solar energy and cooling computers and radars."

Comments

But....

[a.phoenicis]

But does it change waste heat into electricity? I'm not quite sure based on that write-up...

Re:But....

[lisaparratt]

No, it turns it into Techno. Small generators mounted on ravers create the actual electricity.

Sound to electricity.

[snowraver1]

Now they need to refine this to 100% effiecency and attach one to my wife.

Re:Sound to electricity.

[Wicko]

Save electricity! Piss off your wife! Attach to your kids!

Re:Sound to electricity.

[Simply Curious]

On the other hand, any inefficiency would show up as heat, allowing it to cycle through towards absolute zero.

Wait a minute...

Ack! Stupid Second Law of Thermodynamics.

Efficiency as opposed to thermoelectric?

[Anonymous Coward]

I just skimmed the article, but I didn't see mention of the efficiency of this process. What are the advantages to converting the heat to sound first, rather than directly to electricity via thermoelectric processes?

Re:Efficiency as opposed to thermoelectric?

[cosinezero]

And from the looks of that giant glass pipe lit by a blowtorch, my money's on the researchers being 100% Wasted while thinking this one up, too.

Re:Efficiency as opposed to thermoelectric?

[LWATCDR]

I think cost is more important the efficiency. If it was cheap enough and if you could say get 10% out of it it could be very useful.
Imagine replacing a car radiator with it?

Re:Efficiency as opposed to thermoelectric?

[dch24]

You want to read the Original Article. Although the link above is almost an exact copy, there's some interesting stuff at the bottom of the original:

Physicist Orest Symko's graduate students will present their studies during an Acoustical Society of America technical session from 8 a.m. to 10:05 a.m. MDT Friday, June 8 in Parlor B of the Hilton Salt Lake City Center hotel, 255 S. West Temple.

It would be interesting to hear all the questions there. I imagine yours will be handled pretty well.

Obviously the conversion to sound can't beat Carnot's Theorem, and it says in the article it doesn't start until there's a temperature gradient of at least 90 degrees F. In other words, it's not very efficient.

Re:Efficiency as opposed to thermoelectric?

[Dan Ost]

Carnot's Theorem applies to heat engines that use a gas to do work.

It's not clear to me that Carnot's Theorem applies to this technique.

Anybody want to chime in with some insightful comment on this?

Re:Efficiency as opposed to thermoelectric?

[Phisbut]

Never mind the hair splitting over "efficiency." How about the absurdity of using the word "renewable?"

Wow, you woke up in a pedantic mood this morning...

Solar energy isn't renewable... it's continually available from the sun. [...] Wind isn't renewable - it's just generally, mostly available...

We call "renewable" energy a form of energy that we're not exhausting by using up. Harvesting solar energy today won't make less sun energy available tomorrow. The sun will not expire faster if we use its energy to produce electricity. Hydro is the same. Water will flow from the top of the mountain to the bottom whether we build a dam or not, so while we are harvesting the water's potential energy, we are not the cause of its exhaustion (gravity is, damn you gravity!).

When you do something "from scratch", do you start by creating a whole universe from a Big Bang instead of using what's already there (thus, not starting really from scratch)? People do stuff from scratch without creating universes, and the sun provides renewable energy.

Taking the meaning away from words dumbs all communication down, and erodes our culture's ability to do intellectually challenging things.

Words have accepted meanings, and that is how we communicate. Agreed upon meanings are usually recorded in big books we call dictionaries. You should get one, they're really good.

May I recommend The American Heritage® Dictionary of the English Language, Fourth Edition, which defines renewable as :

Relating to or being a commodity or resource, such as solar energy or firewood, that is inexhaustible or replaceable by new growth.

Or maybe you would prefer WordNet® 3.0© 2006 Princeton University

capable of being renewed; replaceable; "renewable energy such as solar energy is theoretically inexhaustible"

Here's a last one from The American Heritage® Science Dictionary

Relating to a natural resource, such as solar energy, water, or wood, that is never used up or that can be replaced by new growth. Resources that are dependent on regrowth can sometimes be depleted beyond the point of renewability, as when the deforestation of land leads to desertification or when a commercially valuable species is harvested to extinction. Pollution can also make a renewable resource such as water unusable in a particular location.

Re:Efficiency as opposed to thermoelectric?

[It'sYerMam]

Why not call gravity-powered electricity generation (say, the Hoover Dam) just that: gravity-powered. That means something, especially if you mention the hydro part of it in conjunction. As opposed to "tidal power" (also hydro, but a different beast).

Refer to Wittgenstein; meaning is use, and renewable is used to mean the definition that has been explained to you. I can imagine the scene at Bletchley park, now:

"But these encrypted messages are just a bunch of characters! They don't mean anything!"

Meaning is determined not by what one person thinks - not even by what the dictionary says - it is determined by how it is used in a particular context.

Re:Efficiency as opposed to thermoelectric?

[ScentCone]

Meaning is determined not by what one person thinks - not even by what the dictionary says - it is determined by how it is used in a particular context.

Right! So, consider my post and this thread to be an attempt to encourage people to use that word (and the others that are thus required) in a more meaningful way. If a single word is used to represent lots of substantially different things (in this case, "renewable" interchangeably meaning the same thing when referring to a marginally better way to burn coal and also using solar energy). I'm not complaining about the evolution of language. I'm complaining about the DE-evolution of language. The loss of precision. The inability to know, from the use word used, what is actually meant... or worse, to be MISLED by the choice of a particular word. That's fine for advertising, but not for science.

Re:Efficiency as opposed to thermoelectric?

[wsherman]

This is demonstrably false. Beating Carnot's theorem does not imply 100 percent (or greater) efficiency. The 2nd law would still be preserved.

Let's say you have a heat reservoir (e.g. a coal fire) and a cold reservoir (e.g. a cooling tower). You could just let the heat from the hot reservoir flow to the cold reservoir with nothing else happening. You could also set up a steam engine so that the flow of heat from the hot reservoir to the cold reservoir caused some of the heat to be "converted" to mechanical energy (or electrical energy or something equivalent). Now, ideally you would want as little heat as possible to flow between the reservoirs with as much heat as possible being converted to mechanical energy. Carnot's Theorem places an upper limit on how "efficient" this process can be. Basically, the smaller the difference in temperature between the two reservoirs the more heat will flow between the reservoirs and the less heat will be converted to mechanical energy.

Let's now consider a different scenario. Suppose you have some mechnical energy (e.g. some electricity) and you want to create a temperature difference between two heat reservoirs (e.g. you want to air condition your apartment). In this case, you want to do as little work as possible (keep the electric bill low) while moving as much heat from the cooler reservoir up to the hotter reservoir (moving the heat out of your apartment). Basically, you want to minimize the "conversion" of mechanical work to heat while maximizing the flow of heat between the reservoirs. Carnot's Theorem also applies here. You have to do less work to move heat between reservoirs that are at almost the same temperature and you have to do more work to move heat between reservoirs that are at very different temperatures.

For the second part of Carnot's Theorem, imagine that you found one (reversible) process where there was a lot of heat flow between the reservoirs for a given amount heat-work conversion and another (reversible) process where there was very little heat flow for a given amount of heat-work conversion - assuming the same temperature difference between heat reservoirs for both processes. You could hook these two processes together and have a perpetual motion machine of the second kind.

To put it another way, if you could find either an air conditioner or a power plant that was not limited by the Carnot Theorem then you could use your air conditioner to generate the temperature difference to run your power plant and you could use the electricity from your power plant to run your air conditioner all while having electricity left over to power your television (i.e. you'd get free energy from your power plant - no more having to burn coal).

Can it really be this good?

[Nom du Keyboard]

This would seem to say that I can take waste heat from my A/C heat-exchangers making them more efficient, and create electricity to drive said system and fans in the process. Given that it's about 100 degrees outside at this moment, this would be sweet!

Re:Can it really be this good?

[Lumpy]

you need a significant heat differential as well as the fact that AC needs fast dissipation to work.

Ac coils need to shed that heat fast, even faster when the ambient temperature is up there like 100degF (I hope you mean 100F and not 100C) This process relies on a wider temperature differential and not shedding it fast.

so it will not work in most places where waste heat energy recovery would be a benefit.

Re:Can it really be this good?

[Steendor]

Maybe it wouldn't work very well in the A/C, but I bet it could be used externally. For a while, my parents had a large thru-wall unit exhausting into an enclosed space, and that space got very warm.

Massive /. potential

[u-bend]

There's so much waste heat here (Star Wars, Linux, browser, KDE/Gnome debates), that we could power a city and rock out at the same time.

Cool idea!

[thewiz]

Er, hot idea!

Um, maybe I should stop now.

No efficiency ratings

[denis-The-menace]

How efficient is it?

With double conversions it couldn't be much.

Why not convert heat into electricity DIRECTLY using a peltier device?
(aka Seebeck effect http://en.wikipedia.org/wiki/Thermoelectric_effect )

Re:No efficiency ratings

[drinkypoo]

Why not convert heat into electricity DIRECTLY using a peltier device?

Because peltier junctions are themselves horribly inefficient?

I wonder

[Normal Dan]

If it could be used to practically and economically extract the rest of the energy from nuclear waste, which still produces quite a bit of heat. 'Free' power for thousands of years.

Maxwell's Daemon Rides Again?

[overshoot]

Unless they're claiming to have found a way around the Second Law, the efficiency of any such conversion is going to utterly suck. My CPUs run less than 10C above ambient, so the absolute Carnot limit on any converter recovering that heat is going to be about 3%.

Why bother?

[1] Thermodynamics, not Robotics

Re:Maxwell's Daemon Rides Again?

[byron036]

If the device extracts energy, then the temperature of your CPU will be lowered. Thus replacing the heatsink.

Link to main site.

[Anonymous Coward]

http://www.physics.utah.edu/~woolf/acoustics/

Good for comps

[eebra82]

I realize this could be a great thing for computers - especially portable computers. However, I am more interested in how large portion of the heat that turns into sound and eventually into electricity. My stationary computer is fine without all that extra power. What I want is to know if this will kill the need for huge fans and actually remove some of the heat, or if it will just suck a small portion of it.

Use in autos?

[evildarkdeathclicheo]

Since the internal combustion engine is really a noisy heat pump, wouldn't this be of use in hybrids, or perhaps as an alternative alternator? (alternatator? alternatatoe?) Perhaps in the cubicle farms of tomorrow, we'll all be sitting on these heat-powered piezo tubes and fed a diet of beans to power our own workstations.

Dog Whistle

[Apocalypse111]

Symko says the devices won't create noise pollution. First, as smaller devices are developed, they will convert heat to ultrasonic frequencies people cannot hear.

So now we've turned my car into a mobile dog-whistle, causing even the well-behaved dogs to bark at me.

Ooh, on the other hand, maybe we could get the sound into the frequency range at which various crystal wine glasses shatter... I've got some asshole neighbors who could do without those particular bits of glasswear.

Diaphragms?

[bigattichouse]

would it be possible to do something with a speaker? (as an experiment). I understand TFA about the piezeo devices being compressed/released by the plates vibrating like a flute, but I started wondering about the image that immediately popped into my head, of tuned diaphragms responding to air pressure differences to vibrate a coil... I guess if you did the flute thing, you could just put a piezo crystal between a tuning fork and a solid surface... every note at that frequency, especially if sustained, would then make power.... So, how about making great huge "moaning towers" out in the middle of nowhere that do the same thing? I'll call it "BULLROAR"(tm) technology. Hell.. I wonder if the forces involved on a bullroar spinning aroud your head might generate power (say, with a couterweight like thos rechargable watches). This idea is kinda fun.

cooling computers?

[gEvil (beta)]

I'm not sure about you, but when I spec parts for computer cooling, I'm looking for something that's cool AND quiet. I don't want whatever device to be creating extra sound in it's quest to cool more efficiently.

Less heat is good...

[FlyByPC]

...as long as the sound-conversion part doesn't leak too much. My workstation already sounds like a jet engine.

Heat to Sound to electricity.

[malvidin]

Well, luckily my wife doesn't need to be loud. She's that hot.

Re:Heat to Sound to electricity.

[jbeaupre]

This is Slashdot, which means we have to double check whether you are actually married or what you mean by hot. Let's hope you mean online "wife" and not that you set your real wife on fire.

Re:Heat to Sound to electricity.

[pan_piper]

Well, luckily my wife doesn't need to be hot. She's shocking.

Re:Heat to Sound to electricity.

[StikyPad]

Well, luckily my wife doesn't need to be shocking. She's battery powered.

Re:use it to power my computer

[ThosLives]

I've always wanted to try using the thermal dissipation of the processor to power its own cooling system. That is, create a pressurized case, and have an intake compressor that brings in cool air, which is heated by the processor(s), which is then sent out through a power-tapping device (turbine or piston) to power the compressor and keep things going.

Basically a Brayton-cycle cooling system. You could actually move a lot of air with 300W power dissipation! (way more than you can with a little 15 W cooling fan).

(Too bad the drawbacks are that it requires some pretty slick machinery and a pressure chamber :p )

Just a little prob with the numbers....

[Ancient_Hacker]

Nothing to see here. It's just a Prof that's spent $2 million on a wild goose chase. Now with the great smell of fish! The rub is multi-fold:

• Good old Carnot's law. The efficiency is limited by the temperature drop across the device compared to the absolute temperature. Now take two thermometers, stick one up your butt and fart. compute the temperature difference. Divide by 483. That's your efficiency in converting heated gas into sound. Prolly about 0.005% as a rough approx.
• For a less gross example, pucker your lips and blow. Do this for five minutes or until you pass out. You probably feel warm-- that's the heat. How much acoustic power did you generate? Well a loud whistle is about 100dbA, about a hundredth of a watt. Efficiency, 0.004% at best.
• Piezoelectic efficiency. Well, it's really high-- for an acoustic transducer. The Interwebs seem to reveal no figures for this, and in general a high level of coyness is a way of hiding embarrasing numbers. Let's assume a best-case number of say 40%.
• The impedances. Crystals are very high impedance devices, putting out LOTS of volts at vanishingly small amps, which is bad news for us, as most of our power sinks are low impedance. Getting a few milliamps at 40KV is not very compatible with powering your laptop, which is about a million times lower in impedance. It's particularly inconcvenient converting tens of kilovolts downwards with economy and efficiency.

So sorry, probably much less than nothing to see here, just another bundle of our taxpayer's money spent on a totally pointless technical exercise.

Re:Just a little prob with the numbers....

[jbeaupre]

Just read about piezo efficiency the other day. 60% is pretty common for polycrystalline. 90+% for single crystal. I'll hunt down the link if you're dieing to read about it yourself.

Re:Finally...

[The_Wilschon]

You think Steve Ballmer is hot? Ewwww

This ars article might be something similar?

[vecctor]

I was trying to figure out where I had seen something like this recently:

http://arstechnica.com/news.ars/post/20070527-new- stove-generator-refrigerator-combo-aimed-at-develo ping-nations.html

this thing also uses thermoacoustic technology.

Cold Fusion

[ISoldat53]

Isn't this the same group that brought us cold fusion?

Re:Cold Fusion

[FoXDie]

Allaire?

Re:to heck with "waste" heat...

[woolio]

if they can actually do this, then set up massive arrays of it on top of active volcanoes and other natural heat sources. As the claim is they end up with electricity, that means there is less heat, and we have this maybe/maybe not global warming thing going on. Seems we can reduce a lot of the natural warming of the earth's atmosphere with something that can do this, if it really can...

Yes, but can you imagine the environmental effects caused by cooling a volcano at "Faster-Than-Nature-Indended" rate?

The environmentalists would raise hell!

Re:Linux Toaster?

[Petaris]

I know this is a bit off topic but given your post I just can't help but to respond with this: Toaster oven linux appliance :)

- Petaris

"The World is Open. Are You?"

Why not use a solid-state Pelier instead?

[macraig]

Some Slashdotters have doubtless use Peltier devices to try to chill their massively overclocked PCs, but that's only one application of them: they can also be used in reverse to generate electricity from a thermal differential. I don't know how the efficiency would compare to this - an actual efficiency wasn't mentioned in TFA and I've never used a Peltier in this fashion - but I suspect it might be comparable. There's also the absence of moving parts to consider, too.

Re:Linux Toaster?

[Maliron]

Not sure why my comment was considered off topic, the article even suggests PC use.. Toasters generate exuberant amounts of heat, an ideal source of electricity (using this new method) to power the toaster PC. hehe Anyways, cool link! This story reminded me of the BSD toaster that was /.'d a while back, which triggered my comment.

Current thermopiles are pretty low efficiency.

[Ungrounded Lightning]

What are the advantages to converting the heat to sound first, rather than directly to electricity via thermoelectric processes?

Current thermopiles are pretty inefficient. The main problem is that they unavoidably leak heat from the hot to the cold side. In peltier cells (the ones in those cheap "coolers" and CPU heatsinks) leak several times as much heat as they make use of when running as generators (and leak most of the heat they pump, so they have to pump it several times to get it dumped). There's a more efficient one in the labs, which doesn't have a lot of charge (and thus heat) carriers in the hot/cold bridge. But it's still far from perfect.

They also have to operate at temperatures that don't destroy their materials - typically semiconductors. That limits how hot the hot end can get, and thus how much energy you can get out of the heat (since they can't break the carnot cycle rules).

These devices are gas-working-fluid heat engines, with the gas (and the piezo power takeoff) as the only moving part(s). In principle the gas "prime mover" should be able to approach carnot cycle efficiency (which is as good as you CAN get) - and that's what this group is trying for. Being made of gas and metal, the "hot end" can get very hot, too, so you aren't as limited as with semiconductor heat converteres. Meanwhile, piezos are extremely efficient as well - and some (like quartz) can also handle very high temperatures.

As simple mechanical systems they should also be easier to fabricate than semiconductors, making them a garage-shop item that doesn't require your garage to be a clean-room in silicon valley with 100 megabux of specialized equipment.