Slashdot Mirror
Should Network Cables Be Replaced?
Jyms writes "As technology changes, so hubs routers and switches are upgraded, but does the cabling need replacing, and if so, how often? Coax gave way to CAT 5 and CAT 5e replaced that. If you are running a 100Mbit/s network on old CAT 5, can that affect performance? Do CAT 5(e) cables get old?"
For best performance, replace it with a genuine high performance cable like this: http://www.usa.denon.com/productdetails/3429.asp
Fuck systemd. Fuck Redhat. Fuck Soylent, too. Wait, scratch the last one.
Should I have a plumber re-run copper all over my house?
maybe if your new sink is capable of 1000 gpm (gallons per minute) and the pipes can only provide 100 gpm. but that's only if you care about using your new sink to its full potential.
You should replace your tired old CAT5 with brand new, all-gold Monster-CAT6+++++++!
Only $1000 a foot, starting in 10 foot increments!
Chas - The one, the only.
THANK GOD!!!
Obligatory:
When it was installed, your old cable had to run signals uphill through the snow, both directions. They didn't have electrons back then, they had to nake do with quarks. Time hadn't been invented yet, so the direction and speed of network traffic was hard to estimate.
Who would win this election: Andrew Weiner vs Andrew Weiner's weiner.
It's not pipes. It's a series of tubes.
A slashdotter who didn't build his own computer is like a Jedi who didn't build his own lightsaber.
If you do not, then cracks will appear and bits will start to drip from it. Soon, that drip will become bigger and you will have bytes dropping out. Cheaper to replace them now, then to lose all those bytes. I can be over there next week to replace them all for a low low price.
I prefer the "u" in honour as it seems to be missing these days.
maybe if your new sink is capable of 1000 gpm (gallons per minute) and the pipes can only provide 100 gpm. but that's only if you care about using your new sink to its full potential.
The bathroom stalls where I work are always full. There's not enough toilets for the number of butts. They could certainly benefit from upgraded bathroom bandwidth.
Disconnect your television. Do your own research. Draw your own conclusions. They're probably lying. Don't be a sheep.
its the interfaces, not the bandwidth
rewriting history since 2109
The bathroom stalls where I work are always full. There's not enough toilets for the number of butts. They could certainly benefit from upgraded bathroom bandwidth.
yeah, I'm sure the bandwidth (drain pipe) is large enough for all the shit. It sounds more like they need to increase the number of connections allowed.
We replaced all of our Type 1 cabling at my company after the tokens started falling out.
"What the hell is an aluminum falcon?"
OF WHAT?! Ewww...
Instead of increasing bandwidth, what about using traffic-shaping instead? I'm not sure if this is something that could be automated, or if it would need to be done manually [shudder].
Obviously, to anyone familiar with overselling is aware of, the problem is not the number of users for the bandwidth assigned. The problem is likely that 2% of your poopers consume (bad word choice, I know) 98% of your bandwidth, resulting in a logjam of epic proportions just after lunch. They key would be to cap their usage, so that everyone else can use the bandwidth in moderate amounts.
Most likely, your excessive users are illegally logsharing anyway. There can't be any legitimate reason for someone to spend 4 hours a workday on the crapper, can there?
"Trolls they were, but filled with the evil will of their master: a fell race..." -- J.R.R. Tolkien on Olog-hai
Yes, but make sure all the connectors are gold plated - it helps to improve the quality of the water.
Vintage computer adverts: http://www.vintageadbrowser.com/computers-and-software-ads
... I had to use LACP trunking to get my bandwidth up.
I had a mental image of you sitting by the wiring closet, along the hotel corridor, staring intensely at your laptop.
Wearing only a towel.
Any category of "cat" can certainly help with that...
No, you don't get it. This is not something that you just dump something on. It's not a big truck. It's a series of tubes. And if you don't understand, those tubes can be filled and if they are filled, when you put your shit in, it gets in line and it's going to be delayed by anyone that puts into that tube enormous amounts of material, ENORMOUS amounts of material.
A bullet may have your name on it but splash damage is addressed "To whom it may concern."
Play one of those halloween scary sound CD's on repeat, very loud, all day. It's not so much scary as it is unsettling, and people will avoid spending time in there unless it's an emergency.
Alternate titles:
pigs being slaughtered
Jokes, except the punchline is cut out
one cat, in heat, wailing and meowing to be let out
classical out of one speaker, the sound of crazed laughter out the other
the sound of two balloons being rubbed together
random gunshots spaced 30 sec-90 sec apart. LOUD.
highly amplified signal coming from a microphone near the occupant's toilet
ticking clock that randomly speeds up and slows down
the soundtrack from zombo.com
I don't know. I think my idea would work.
No offense, but I've stopped responding to AC's.
Rather than standard cat6, get Denon's super high fidelity cable. http://www.usa.denon.com/productdetails/3429.asp
/smirk
"AK-DL1
$499.00
Denon's 1.5 meter (59 in.) proprietary ultra premium Denon Link cable was designed for the audio enthusiast. Made from high purity copper wire and high performance connection parts, the AK-DL1 will bring out all the nuances in digital audio reproduction from any of our Denon DVD players with the Denon Link feature connected to a Denon Link enabled Denon A/V receiver. The AK-DL1 employs high level tin-bearing alloy shielding not typically available in commercial cabling, to eliminate data loss caused by noise. Additionally, signal directional markings are provided for optimum signal transfer. Attention to detail when building this cable was used by employing high quality insulation and woven jacketing to reduce vibration and to add durability. Rounded plug levers help prevent breakage.
For operational and technical assistance 24/7, use our self help Online Support Center, where answers to many common questions can be found."
If it's good enough for high fidelity audio reproduction, it should be good enough for our crappy data only needs.
Do you think Sherlock Holmes would have solved so many cases if he smoked a tube? No, Watson, he fucking well wouldn't.
Confucius say, "Find worm in apple - bad. Find half a worm - worse."
""Should I make work for myself on a complicated, invasive, lengthy, and hard to stop project so I can continue to justify my job in a recession?"
Fuck yes!
"If you're going to do anything, upgrade to fiber."
Thanks for the tip!
"This post is an artistic work of fiction and falsehood. Only a fool would take anything posted here as fact."
So, yeah, how did that shielded unshielded twisted pair work out for ya?
Kinky.
John
I tend toward wireless for the home network. If I need to replace the air, I open a window.
Do not mock my vision of impractical footwear
I read "Should Network Cables Be Replaced" and thought maybe I could learn something and gain some insight. Instead I'm treated to the most bizarre toilet analogy of epic proportions.
This may be the best reply thread in the history of /. IMHO.
THANKYOU /.'ers for making my day! :D
You moved your mouse. Please restart Windows for changes to take effect.
Maybe they should just add a wireless hotspot and allow anonymous connections!
Oh sure, blame the content providers!
A post a day keeps productivity at bay.
This may be one instance where REDUCING the amount of fibre in the network may help ease the load.