Bloom Laptop Designed For Easy Disassembly

← Back to Stories (view on slashdot.org)

Bloom Laptop Designed For Easy Disassembly

Posted by CmdrTaco on Monday November 8, 2010 @05:17AM from the hack-on-that dept.

Zothecula writes "It's a given that we will one day be discarding our present laptop computers. It's also a given that e-waste is currently a huge problem, that looks like it's only going to get worse. While most of the materials in a laptop can be recycled, all of those pieces of glass, metal, plastic and circuitry are stuck together pretty tight, and require a lot of time and effort to separate. What is needed are laptops that are designed to be taken apart, for easy recycling – that's why a group of graduate students from Stanford University made one."

128 of 151 comments (clear)

Min score:

Reason:

Sort:

Easily swappable parts by Stregano · 2010-11-08 05:21 · Score: 4, Insightful

If the price is right, this may have double use. I know that one issue with me personally not owning laptops is that when they break, it sucks really bad to do some of the repairs/replace parts. If a laptop is brought to mass market with easy to disassemble parts, maybe we can get lucky and get more 3rd party support for swapping out pieces

--
The world is how you make it
1. Re:Easily swappable parts by Shikaku · 2010-11-08 05:26 · Score: 2, Insightful
  
  Small, easily disassembled, cheap: pick 2.
2. Re:Easily swappable parts by transfatfree · 2010-11-08 05:28 · Score: 1
  
  yeah, hopefully.
  its kinda sad that before laptops can get to a point where they're just as upgradeable as pc's, we have to get to the point where theres too many discarded ones.
  I thought when UPNP came round, this shit wouldnt be a problem anymore.. i was pretty wrong.
3. Re:Easily swappable parts by rjstanford · 2010-11-08 05:35 · Score: 1
  
  As long as laptops are judged almost exclusively on power-for-pound (or power-for-cubic inch), where power could refer to battery life or processor speed, this just plain won't happen.
  Look what happened when Mac moved away from "standard" (if mac-specific) form factors for things like batteries - you get computers like the one I'm typing on, where I have 4.5 hours of development time, unplugged, without an increase in size or weight.
  That's valued a lot more at the moment than disassembly is, rightly so - I work on my machine every day. I feel like breaking it down maybe once every two years.
  
  --
  You're special forces then? That's great! I just love your olympics!
4. Re:Easily swappable parts by Daengbo · 2010-11-08 05:35 · Score: 4, Informative
  
  Take a look at the Nohrtec Edubook, which is completely modular, mod'able, and which is often shipped to clients disassembled for them to assemble themselves. Mike Barnes intentionally created a netbook computer that can be torn down and repaired easily, targeted at developing countries. Very interesting model. Uses rechargeable AAs, too.
  
  --
  Put identity in the browser.
5. Re:Easily swappable parts by Americano · 2010-11-08 05:44 · Score: 2, Insightful
  
  Good point. If someone getting paid minimum wage has to spend an extra hour breaking down my old laptop *once* for recycling, and I get an extra hour or two a day of productive IT work at much-more-than-minimum-wage out of it for three years of use... focusing on saving time at the breakdown point presents a skewed vision of the value of the time involved in manufacture, use, and disposal of the laptop.
  Number of times I've had to crack open whichever laptop I've owned during the ~9 years I've owned one: 2. Once to replace a bad drive, once to upgrade RAM. Number of hours per work day I use my laptop: 8+, with an hour or two per day on weekends. I like that the gear is largely recyclable, but I'll easily pay an extra 50 bucks every few years to cover the extra time spent assembling/disassembling the laptop at manufacture & recycle time if it means I get a more powerful / less bulky / better battery-life unit for the three or more years I'll be using it for.
6. Re:Easily swappable parts by AltairDusk · 2010-11-08 05:48 · Score: 4, Insightful
  
  If shooting for ease of recycling is what gets us easily upgradeable laptops then I'm all for it. I'm willing to accept not having the lightest, thinnest design if it allows me the degree of flexibility currently only found in a desktop for hardware components.
7. Re:Easily swappable parts by MadTinfoilHatter · 2010-11-08 06:00 · Score: 1
  
  Not only that, but this might finally be a way to not being forced to pay the M$-tax on laptops. At least in this country it's currently - for all practical purposes - impossible.
  Also, I used to work for a computer repair shop. We would have eaten these things up. We really hated the typical laptops which were a RPITA to work with, and almost impossible to fix even when you discovered the problem. I've really been looking forward to something like this.
8. Re:Easily swappable parts by mcrbids · 2010-11-08 06:01 · Score: 2, Insightful
  
  Small, Easily Disassembled, cheap, proprietary.
  Pick any three. (FTFY)
  
  --
  I have no problem with your religion until you decide it's reason to deprive others of the truth.
9. Re:Easily swappable parts by couchslug · 2010-11-08 06:05 · Score: 1
  
  "Small, easily disassembled, cheap: pick 2."
  Not necessarily. Desktop case form factors were both standard and cheap.
  Nonstandard cases are good for vendor lock and to deter upgrades though. Anyone remember the Packard-Bell cases shaped like an inverted "T"? :)
  
  --
  "This post is an artistic work of fiction and falsehood. Only a fool would take anything posted here as fact."
10. Re:Easily swappable parts by TheLink · 2010-11-08 06:11 · Score: 1
  
  I think that's the only use of "easily disassembly" as per the article - for repair and reuse.
  
  Not for recycling.
  
  If you are recycling stuff from an old laptop you don't really care that much if some stuff has to break in the process. By the time it hits the dump, hardly anyone would be reusing the parts as is. Costs too much to check if stuff is still working well enough.
  
  Maybe someone should come up with a more environmentally friendly mining system that mines and processes certain types of landfills :).
  
  When it's still worth extracting a tens of grams of gold from a ton of rock, I'm sure it's worth extracting up to a kilo of gold from a ton of motherboards ( along with lots more copper).
  
  A typical PC contains iron, aluminium, copper, gold, silver, palladium, platinum. Yes toxic stuff like mercury might be released in the process - but you often have the same problem when mining and getting metals out from ore.
  
  As long as the process is less nasty to the environment than the average mine (and cheaper per amount extracted), you're already doing good.
  --
  
  Too many replies beneath your current threshold
11. Re:Easily swappable parts by Voyager529 · 2010-11-08 06:17 · Score: 1
  
  At the risk of sounding pedantic, I think that "many" is a bit generous here. Yes, AA batteries are thicker than the Macbook Air, the Dell Adamo, probably a handful of Sony units, and I think there was an ultrathin Thinkpad released a year or two ago. All of the above have something in common: they were EXPLICITLY built to be as thin as possible, to the point where "it's ridiculously thin" was the primary selling feature.
  By contrast, you could comfortably fit "C" size batteries into my XPS M1730; a round of "D" batteries is a couple millimeters away if we're assuming a lid-open design.
  AA batteries would theoretically fit into every netbook I've come across, as well as every 14", 15", and 17" notebook I can recall. Whether a set of AA batteries would be able to pump out enough juice to power any of these machines is another argument entirely, but your statement was, if I could rephrase, "The thickness of the thickest point on a significant minority of recent-generation laptops is less than the circumference of a AA battery", to which I must disagree.
12. Re:Easily swappable parts by Bigjeff5 · 2010-11-08 06:20 · Score: 5, Insightful
  
  Small, easily disassembled, cheap: pick 2.
  Why?
  The proper pattern is: Powerful, High Quality, Cheap, pick two.
  The "easily disassembled" part is a function of a good design. As such, it falls under high quality. Small is also a function of the design, and as such falls under the high quality.
  So you can have a small, easy to disassemble, powerful laptop, but it won't be cheap. You can have a small, easy to disassemble laptop for cheap, but it won't be powerful. You can have a cheap, powerful laptop but, depending on exactly how cheap it is, it won't be small or easy to disassemble or both.
  The real trick here will be to get manufacturers to play along. Desktops are easy, having lots of space is a good thing. Laptops are harder, because leftover space is a bad thing, and a standardized format will invariably lead to wasted space for many designs.
  In the long run, though, things would be a lot cheaper. We'd be spending $50 for a laptop case, $150 for a motherboard, $300 for that kickass new processor, and $150-$400 for the screen. We'll get a custom laptop market similar to the custom desktop market, and that will be very, very cool. In this scenario you could build a reasonably powerful laptop for $300-$400 if you chose last gen's components instead of the latest and greatest.
  If we could get some kind of standardization in the laptop market it would be wonderful in my opinion.
  
  --
  Security is mostly a superstition... Avoiding danger is no safer in the long run than outright exposure. - Helen Keller
13. Re:Easily swappable parts by Darkness404 · 2010-11-08 06:27 · Score: 1
  
  The "easily disassembled" part is a function of a good design. As such, it falls under high quality. Small is also a function of the design, and as such falls under the high quality.
  
  Not necessarily. Apple's machines are generally very well designed but are generally a pain in the ass to dissemble and service. Similarly, there have been many crap machines that have been really easy to disassemble and service that I've owned with terrible designs.
  
  The two are rarely related in terms of functional design and ease of disassemble when it comes to the average user.
  
  --
  Taxation is legalized theft, no more, no less.
14. Re:Easily swappable parts by beelsebob · 2010-11-08 06:28 · Score: 1
  
  Not necessarily. Desktop case form factors were both standard and cheep.
  But not small, even MiniITX can't get down to the sorts of sizes of things like an eeeBox or MacMini without a significant amount of expensive custom parts.
  So you've only validated the GP's point – you chose cheap and easily disassembeled, but lost small.
15. Re:Easily swappable parts by hedwards · 2010-11-08 06:28 · Score: 1
  
  The problem always has been heat and power consumption as much as form factor. They can get away with standardization in desktops because those aren't particularly hard problems. Since it's always plugged in, the only reason for energy efficiency is not wanting to waste power, the thing isn't just going to go dead from that alone. And form factor, you can make it as big as you like without a whole lot of trouble, adding a fourth or fifth 5.25 bay isn't much of an issue.
  
  OTOH Laptops a few ounces do make a difference, and nobody seriously wants to go back to the portable computers of the early 80s, which were essentially a desktop that folded up and included a handle.
  
  Sure you could get standardization, doing it and having them not suck or be completely confusing is a much harder problem than you seem to realize.
16. Re:Easily swappable parts by hedwards · 2010-11-08 06:31 · Score: 1
  
  Not much point in that. Just do what we did in WA state. Make the manufacturers pay for the cost of recycling. Sure it gets passed on to the consumer, but the manufacturers are usually in the best position to minimize waste being produced.
  
  It's one of the few areas where market forces actually works. You just have to make sure you keep an eye on how their disposing of the waste.
17. Re:Easily swappable parts by hedwards · 2010-11-08 06:35 · Score: 1
  
  In some parts of the world, they've got machines the size of a house, which are hermetically sealed. In them they grind up and separate the component metals and particles for use elsewhere. Very little labor involved and quite a bit safer for the environment. You really don't want to have people exposed to the electronics as their recycling them. It's gotten better with newer standards, but there's still a lot of nasty stuff in the waste stream.
18. Re:Easily swappable parts by MadTinfoilHatter · 2010-11-08 06:47 · Score: 1
  
  Not necessarily. Apple's machines are generally very well designed but are generally a pain in the ass to dissemble and service.
  That depends on what you mean by "well designed". Apple's offerings look good, and are decently sturdy, sure. They aren't designed with serviceability in mind, though. If anything they're designed to be a pain in the ass to service, so that noone besides Apple service points will want to touch them.
  There should be no reason why a laptop couldn't be well designed like an Apple, and easy to service. These are in no way mutually exclusive, which was the GP's point.
19. Re:Easily swappable parts by NorbrookC · 2010-11-08 06:51 · Score: 1
  
  Exactly. It's a problem across many industries - just ask any auto mechanic. The people designing the product aren't thinking in terms of servicing the product. I've had to disassemble an entire laptop just to replace a case fan. I had to buy specialty tools just so I could remove and replace the hard drive on another laptop. Those are just some of the examples I've had to deal with - and yes, each of them have been "top of the line" laptops. What was frustrating was that it shouldn't have required that much effort - I mean really, why the hell would you use a screw head type that no standard fitting matches?
20. Re:Easily swappable parts by Americano · 2010-11-08 07:03 · Score: 1
  
  That works too. The point I was making was mostly that I'm more interested in getting more productive usage out of the system over its multi-year lifetime than I am concerned with an extra few hours of assembly/disassembly/maintenance time during the life of the device. I'll happily pay a little extra to cover the extra hassle of assembly/disassembly if I get more power & functionality in a smaller footprint.
21. Re:Easily swappable parts by Mage66 · 2010-11-08 07:05 · Score: 1
  
  The problem with the Edubook is that you can't buy them retail. The shipping cost for one unit is $50us. You need to buy the unit in bulk to get the shipping cost reasonable. Nohrtec doesn't seem to care that these units get into people's hands. they don't have them in a U.S. warehouse to ship single units, and they don't have an American distributor. These are inexpensive units great for use on-the-go. They aren't power user machines. But good enough for E-mail, browsing and as a media player. And they can always be upgraded with a faster CPU in the future. Nohrtec just doesn't know how to market.
22. Re:Easily swappable parts by satuon · 2010-11-08 07:06 · Score: 1
  
  Ever since I saw the iPad I've been thinking that they should make a full computer contained inside a VHS-sized box that can just be slid into a laptop or docking station or multi-touch encasing. It would be like an iPad sans the touch screen. It would be a computer - CPU + RAM + SSD, all contained in a box. Imagine the whole computer box having the form factor of a VHS casette, but thinner. And the laptop case would be just the display+keyboard+batteries+maybe wifi, with a hole below the keyboard in which you insert the computer like you insert a VHS in the video. And when you return home you take it out of the laptop case and slide it in a docking station to power a 22 inch LCD with a real keyboard. And you have a multitouch screen, again with a hole in which you plug it in.
  This could be done with an ARM processor and SSD - it has no moving parts, and is fanless. The system would be underpowered, and ARM means no Windows, so I don't know if people would actually buy it.
23. Re:Easily swappable parts by pecosdave · 2010-11-08 07:09 · Score: 1
  
  Anyone remember the Packard-Bell cases shaped like an inverted "T"?
  Yes, and I can't fathom WHY Packard-Bell is no longer sold in the US.....
  Oh yeah, that and the fact they sucked otherwise....
  
  --
  The preceding post was not a Slashvertisement.
24. Re:Easily swappable parts by Yvan256 · 2010-11-08 07:22 · Score: 1
  
  You can't seriously compare a space-wasting AXT tower with most products made by Apple. Or compare oranges with oranges and use the Mac Pro as the Apple product to compare against your ATX tower.
  The smaller and more portable you get, the more customs the parts are. Even then, changing the RAM in the new Mac mini is extremely easy, no tools required.
25. Re:Easily swappable parts by Yvan256 · 2010-11-08 07:28 · Score: 1
  
  Oh, you mean like an iPhone or an iPod touch? It's still your full computer but it's also pocketable. At your desk, it connects wirelessly to your screen, keyboard, mouse, etc. Just wait a few years. I'd bet Apple already has prototypes of such things in their labs, somewhere.
26. Re:Easily swappable parts by badran · 2010-11-08 07:39 · Score: 1
  
  The idea is for you to buy a new one.
27. Re:Easily swappable parts by badran · 2010-11-08 07:57 · Score: 1
  
  You can have a very close experience to what you describe by using Linux on an SSD or an SD card.
  Get a laptop that allow you easily slide the HDD/SSD in and out. And a desk SDD/HDD stand for your desktop. Configure two X profiles one for the laptop and one for desktop, auto load with help of python or bash. With newer X you do not even need to have profiles (in most cases).
  On desktop setup auto raid 1 and proper nightly backups to keep the on your Mobile SSD safe. Also use full disk encryption.
  I am sure this can be done with Windows, but I a not sure about licensing.
28. Re:Easily swappable parts by Lumpy · 2010-11-08 08:18 · Score: 1
  
  And all that added up to be more than my Quad core i5 18" Nvidia gfx card monster I bought from toshiba.
  Laptops are delicate, I dont want modular, I want cheap to replace. Otherwise I'd buy Panasonic toughbooks.
  
  --
  Do not look at laser with remaining good eye.
29. Re:Easily swappable parts by StayFrosty · 2010-11-08 08:48 · Score: 1
  
  Replying to undo accidental moderation
  
  --
  "Frequently wrong, never in doubt."
30. Re:Easily swappable parts by Qubit · 2010-11-08 09:01 · Score: 1
  
  That's valued a lot more at the moment than disassembly is, rightly so - I work on my machine every day. I feel like breaking it down maybe once every two years.
  I know what you're trying to say, but your words are (amusingly) confusing. It kind of sounds like you work on (as in, modify, tweak) your machine each day, and you have a dance party on about a bi-annual (talk about your confusing words) basis. :-)
  Perhaps:
  "I use my machine for work every day. I feel like opening my machine and replacing parts only about once every two years."
  (Why yes, I have been doing a lot of proofreading lately. How did you guess?)
  
  --
  
  coding is life /* the rest is */
31. Re:Easily swappable parts by satuon · 2010-11-08 09:09 · Score: 1
  
  Hehe, there's a reason the idea popped into my mind after watching the iPad (which is a bigger iPod touch really). Yes, that is exactly what I imagine. The damn thing is probably as powerful as full desktop PC was 10-15 years ago.
  But the iPod would need to lose the multi-touch screen. The device how I see it would be really just a core containing cpu+ram+ssd+videocard and nothing else, except some soft of ports for I/O.
32. Re:Easily swappable parts by Yvan256 · 2010-11-08 09:18 · Score: 1
  
  Why would you drop the multi-touch screen? You are on the go, your complete computer is with you but just with a smaller display and a touch interface.
  When it's "docked", you use your regular, big LCD display, your full-size keyboard and your mouse/trackpad. As for the I/O, either all wireless and/or via the dock connector.
33. Re:Easily swappable parts by Wyatt+Earp · 2010-11-08 10:13 · Score: 1
  
  MacBook Pros are a breeze to get into.
  Unscrew the bottom and you can get to everything.
  The G5 and Mac Pro towers have been maintenance dreams for 6-7 years now.
34. Re:Easily swappable parts by drsmithy · 2010-11-08 14:46 · Score: 1
  
  In this scenario you could build a reasonably powerful laptop for $300-$400 if you chose last gen's components instead of the latest and greatest.
  You can buy a reasonable powerful laptop today for $300-$400, with the added bonus that it's probably had at least a modicum of engineering effort put into making sure the whole package works together (cooling, power draw, etc)
  There is only one type of person for whom building a computer vs buying something off the shelf is cheaper: those who have the requisite knowledge and put no dollar value on the time involved. For everyone else - and even for experts who value their time appropriately - buying something off the shelf is cheaper.
35. Re:Easily swappable parts by hitmark · 2010-11-08 15:53 · Score: 1
  
  Shuttle was showing of what they hoped would become a laptop motherboard standard at a recent trade show.
  
  --
  comment first, facts later. http://chem.tufts.edu/AnswersInScience/RelativityofWrong.htm
36. Re:Easily swappable parts by IICV · 2010-11-08 20:38 · Score: 1
  
  On the other hand, I've disassembled my current laptop all the way down to the motherboard in order to replace the heatsink/heatpipe/fan assembly. It was a $60 part and ~1 hour of my labor to save a $2000 laptop, so it was definitely worthwhile.
37. Re:Easily swappable parts by drsmithy · 2010-11-08 20:46 · Score: 2, Insightful
  
  There should be no reason why a laptop couldn't be well designed like an Apple, and easy to service.
  When you say "easy to service", do you mean "easy to service by a trained individual with a proper toolset and work environment", or "easy to service by some random person who put a computer together once with a philips screwdriver and a kitchen table" ? Because these are *very* different design constraints.
38. Re:Easily swappable parts by drsmithy · 2010-11-08 20:50 · Score: 1
  
  Exactly. It's a problem across many industries - just ask any auto mechanic. The people designing the product aren't thinking in terms of servicing the product.
  Yes they are, they're just considering it as a secondary (well, tertiary or lower) priority to things like size, weight, battery life and "can pull it apart with nothing more than a pocket knife".
  Which is generally a good engineering decision, when a machine spends 99.99% of its time as a laptop and 0.01% of its time disassembled on a workbench.
39. Re:Easily swappable parts by Coren22 · 2010-11-09 08:06 · Score: 1
  
  In fact, to expound, if you tear apart most laptop battery packs, they contain rechargeable AA batteries...
  
  --
  APK likes to ask for responses to the same things over and over. Maybe he just likes the responses?
40. Re:Easily swappable parts by Coren22 · 2010-11-09 08:09 · Score: 1
  
  However, the modern iMacs only allow you to upgrade the RAM without special tools like giant suction cups.
  
  --
  APK likes to ask for responses to the same things over and over. Maybe he just likes the responses?
41. Re:Easily swappable parts by Coren22 · 2010-11-09 08:14 · Score: 1
  
  UPNP? I don't think that means what you think it means.
  http://en.wikipedia.org/wiki/Universal_Plug_and_Play
  
  --
  APK likes to ask for responses to the same things over and over. Maybe he just likes the responses?
42. Re:Easily swappable parts by rdnetto · 2010-11-11 13:14 · Score: 1
  
  The AI SmartBook is similar, except it's ARM (so 3x the battery life) and instead of being easily disassembled, the design goal was to be completely open. It ships with Android, Ubuntu and a custom built OS.
  
  --
  Most human behaviour can be explained in terms of identity.
43. Re:Easily swappable parts by rjstanford · 2010-11-12 04:12 · Score: 1
  
  On the other hand, I've disassembled my current laptop all the way down to the motherboard in order to replace the heatsink/heatpipe/fan assembly. It was a $60 part and ~1 hour of my labor to save a $2000 laptop, so it was definitely worthwhile.
  Although I'd suggest it would still have been worthwhile had it taken 2 hours of time. Or a $100 service charge for someone who uses specialized tools and experience. Or whatever. :)
  
  --
  You're special forces then? That's great! I just love your olympics!
Easy recycling? by Drakkenmensch · 2010-11-08 05:26 · Score: 3, Insightful

How about easy repairing so we don't toss them out so quickly in the first place?
1. Re:Easy recycling? by Haedrian · 2010-11-08 05:29 · Score: 2, Insightful
  
  I'm pretty sure with the fact that they can be disassembled, anything you break (or want to upgrade) could be slotted in easily.
  
  I wonder why nobody else thought of this concept before. Size matters?
2. Re:Easy recycling? by WrongSizeGlass · 2010-11-08 05:30 · Score: 3, Insightful
  
  How about easy repairing so we don't toss them out so quickly in the first place?
  The large laptop manufacturers will resist this because it conflicts with their "built in obsolescence" design principles. If you can keep the main laptop and only swap out keyboards, LCDs, motherboards, etc as needed you'll do it instead of buying a brand new one with a new MS license associated to it.
3. Re:Easy recycling? by drcheap · 2010-11-08 05:40 · Score: 1
  
  Yeah, the goal was easy disassembly for less effort by the recyclers. But a side effect of easy disassembly is easier repairs/upgrades, which in turn means reuse of the case. An unintended benefit, oops! That's what really should have been the goal.
  anti-go-green-mentality rant:
  Everyone is so gung-ho about recycling that they seemed to always forget that it is the third best option in the save-the-planet efforts...
  1. Reduce -- If you don't use something in the first place, you avoid creating waste
  2. Re-use -- If you use something again, you avoid creating waste
  3. Recycle -- If you recycle, there is just a bit less waste
  Personally I've re-used the same Antec tower case over and over again through many generations of major hardware upgrades in my home computer for over 10 years now. Whoa, look at me, I'm green! No I'm not, I'm just not stupid.
  /rant
  Of course, for this to really become a useful re-use option, there would have to be some kind of form-factor standards for notebooks similar to the AT, ATX, et. al. we have on the desktop world. Given the current state of notebook design variations, this will be quite a barrier.
4. Re:Easy recycling? by Rivalz · 2010-11-08 05:42 · Score: 2, Interesting
  
  They already require computer manufactures to meet certain epa guidelines for materials used. Why not just go one step further and force them to adopt a 5 point disassemble guideline.
  If a laptop can be disassembled by blindfolded a 5 year old Chinese child it passes the test.
  Still I just see this style of design as a natural step in the evolution of computers.
5. Re:Easy recycling? by AltairDusk · 2010-11-08 05:44 · Score: 1
  
  I was unaware that preference in software companies determined one's sexual orientation or state of happiness. Technically he is correct, the cost of a Windows license is included in a laptop that ships with Windows installed. When did pointing out facts become a problem?
6. Re:Easy recycling? by snowraver1 · 2010-11-08 05:45 · Score: 1
  
  We should be making laptops modular. The screen should be replaceable. Keyboards should have standard mounting configurations. Internal fans should be standardized. MBs should have come in standard sizes with standard mounting holes, and standard I/O port locations to allow swapping MBs.
  
  I think that the problem with Laptops is that they are not upgradable at all. If something dies, most of the time, the whole laptop needs to be replaced. Sure, you can order specialty pieces to replacement, wait for them to be shipped in from China and then figure out how to install them. Wouldn't it be nicer if you could go to your local computer shop and pick it up the same day? Instead of recycling the laptop, let's make it upgradable.
  
  --
  Copyright 2010. All rights reserved. This comment may not be copied in any way including, but not limited to caching.
7. Re:Easy recycling? by rwa2 · 2010-11-08 05:56 · Score: 1
  
  Meh, I've been fairly happy with Dell laptops for that sort of thing. Just try to stick to parts that are used with their corporate laptops. Most of their midrange Inspiron lines are compatible with parts from their long-support-cycle Latitude corporate line.
  I've replaced plenty of keyboards, and upgraded CPUs and even a GPU in some of my Dell laptops. Plus if you're friendly with your IT guys from work, they might even let you grab some extra parts from them ;-P
8. Re:Easy recycling? by newcastlejon · 2010-11-08 05:58 · Score: 1
  
  You don't need to have a glued-together piece of kit to have planned obsolescence. All you need to do is discontinue the parts or make them so expensive as to make repair impractical.
  
  --
  If God forks the Universe every time you roll a die, he'd better have a damned good memory.
9. Re:Easy recycling? by arivanov · 2010-11-08 06:06 · Score: 1
  
  I have been repairing and upgrading laptops for ages. Some are more difficult to maintain than others. All in all, once you get the knack to work on them and have the right tools, most are not that much different from a branded desktop. This especially valid for the corporate series from all manufacturers.
  
  --
  Baker's Law: Misery no longer loves company. Nowadays it insists on it
  http://www.sigsegv.cx/
10. Re:Easy recycling? by Daengbo · 2010-11-08 06:17 · Score: 1
  I'd like to edit your list:
  
  1. Reduce
  2. Repair
  3. Re-use
  4. Recycle
  I was talking to a guy who lived in Costa Rica last week, and compared CR to SE Asia (where I lived for a few years). The funny thing is, you see virtually everything go through that whole list -- it's fixed until it no longer can be, then used for another purpose until it completely breaks, then the pieces are recycled.
  --
  Put identity in the browser.
11. Re:Easy recycling? by mlts · 2010-11-08 06:20 · Score: 1
  
  I like reusing older tower cases, especially ones with Windows 95 and 98 stickers on them. Usually with a decent PSU, they will do a good job. To boot, a thief breaking in won't bother with what he thinks is an ancient machine, and will go for something else in the house.
  I miss the old case I used to have which had Medeco locks not just on the front to lock out PS/2 keyboard access, but separate ones to lock the case closed. A would be thief would have to yank out a crowbar and do some heavy prying to get to the goodies in that one. Most keylocks on modern cases are a joke and a bad one at that. Whatever happened to putting something pick resistant? This way, if someone does crowbar the case open, it would definitely leave a signature [1] which makes it easier to file an insurance claim.
  [1]: Some picking might leave a signature, but in reality (ceteris paribus), picked lock == claim denied, smashed open lock == obvious burglary, claim more likely approved.
12. Re:Easy recycling? by rwa2 · 2010-11-08 06:20 · Score: 1
  
  Word up!
  It's sad that PCs have usable lifespans (with the help of upgrades) of 5-10 years, but laptops go out of date in maybe 3-5 years, and smartphones are probably down to 1-2 years. You can see where all of the money is nowadays... the things with the shortest lifespans and planned obsolescence (laptops without Vista/Win7 drivers, and smartphones that no longer get OS updates abound!)
  I wish more laptops had upgradable GPUs. Some high-end ones do. That's pretty much the only thing keeping me from reusing the big beautiful displays on some of my older laptops... And also what keeps me from throwing money away at cheap laptops with crappy integrated graphics.
  Wish there were more cheap "luggable" PC options around... It would actually be pretty sweet to have some sort of "transformer" PC based around a little KVM connected to a nanoITX PC, maybe even powered by some battery packs.
13. Re:Easy recycling? by hedwards · 2010-11-08 06:37 · Score: 1
  
  They've got a lower cost of living there, which both allows and requires that sort of thing. Anyways, repair is implicitly included in both reduce and reuse.
14. Re:Easy recycling? by hedwards · 2010-11-08 06:40 · Score: 1
  
  That's largely because they break more quickly than desktops and are harder to fix. On top of that most software isn't written to run well on a Laptop. It's written assuming the resources of a typical desktop.
  
  The end result is that this technology is going to be much more useful for recycling, although if we can easily replace the HDD, optical drive, network card and video card, that would go a long way.
15. Re:Easy recycling? by c.r.o.c.o · 2010-11-08 06:49 · Score: 1
  
  I used to own a Vaio SR490 that took a small bump when I crashed my motorcycle. It still worked just fine, but one of the screen hinge caps broke and the DC plug was exposed.
  I wanted to replace it, and the cheapest I found that little piece online was $40+shipping. Cheapest I found it from Sony? $60+tax+shipping. It's a small piece of molded plastic, that even after manufacture, storage, etc cannot cost more than a few dollars.
  I could have continued using the laptop as is, but it was bugging the hell out of me. So I sold it. That is how you get consumers to replace gear. What Sony did not count on was me buying an Asus instead of a Sony just for spite. :)
16. Re:Easy recycling? by maeka · 2010-11-08 06:53 · Score: 2, Insightful
  
  I wanted to replace it, and the cheapest I found that little piece online was $40+shipping. Cheapest I found it from Sony? $60+tax+shipping. It's a small piece of molded plastic, that even after manufacture, storage, etc cannot cost more than a few dollars.
  I'm sure manufacture, storage and inventory were only a few dollars. So were the manufacturing, storage, and inventory costs for the dozens of parts which never got sold.
  The parts business is one of statistical inventory. Cheap prices OR large inventory, not both.
17. Re:Easy recycling? by pslytely+psycho · 2010-11-08 06:54 · Score: 1
  
  Since you have been upgrading and repairing laptops for ages I have a query for you. I have a 2.5 year old gateway 17" fx. It has been a great laptop replacement in my semi truck but I would like to upgrade video, blu-ray, cpu etc.
  
  In your experienced opinion, is this worth the effort or even possible.
  
  I use it for music, gaming, internet and gps functions. So it is on about 16 hrs a day, on my off time it is hooked to a 22" visio television for gaming.
  
  I would appreciate any advice. Thanks in advance.
  
  --
  Donald Trump, on a crusade to make Nixon look respectable
18. Re:Easy recycling? by Darinbob · 2010-11-08 08:18 · Score: 1
  
  How about desktops? Easily recyclable, very customizable, and in exchange for being cheaper you get more performance. Whereas a laptop gives you the advance of... letting everyone know that you're desperately trying to look cool or are a middle management goon?
19. Re:Easy recycling? by natehoy · 2010-11-08 09:04 · Score: 1
  
  Size matters?
  Absolutely. That, and cost. And it's not that no one has thought of it before, it's that everyone who has brought one to market has failed miserably, and for damned good reason. Modular laptops have existed before. They've been expensive, heavy, and really no more upgradeable than desktops (which don't get upgraded outside the geek crowd really all that much).
  Really, what percentage of machines would be upgraded if the user had the easy capability of upgrading them without anything more complex than a screwdriver?
  To answer that question, look no further than desktops, the VAST majority of which are designed to be upgraded easily, and the VAST majority of which are thrown away with the exact same components they were purchased with. The last two Dells I've salvaged had cases designed to be opened without even a screwdriver, and yet I found them in the dumpster with the factory seal intact. The owners had simply purchased new machines, and thrown the old ones in the scrap bin. I've dumpster-dived and set at least a half dozen machines up for reuse, and all but one had their original components firmly intact when I compared them to the original specs on the model. One, just ONE, had an upgraded hard drive and optical drive, and an extra couple of chips of memory added (all of which can be replaced in any commodity laptop today, by the way).
  Speaking of which, you really need look no further than the current bits of a laptop that are already designed to be replaced/upgraded easily (battery, memory, wireless card, hard drive, etc) today on most laptops. I'd bet that easily 80% of those never get upgraded, and that's a component that is easy to do and makes sense to make them upgradeable/replaceable.
  Now imagine making the motherboard, keyboard, screen, trackpad, speakers, etc modular. Change the motherboard and you need to change the memory and CPU, so there's the cost of a new laptop right there. Think of the number of connectors you'll need for everything. Think of the complexity you'll need to design in - your new motherboard has to work with your old video card and your old wireless card and your old hard drive and have exactly the same connectors in exactly the same places (want HDMI? Sorry! New connector = new chassis!), or you'll end up replacing so many components it'll cost more than a new machine. You can't upgrade to a bigger screen or it won't fit in the chassis at all.
  If you design laptops to be as modular and upgrade-ready as desktops (as in "only a screwdriver required"), you'll have to replace all of the current soldered connections with plastic-and-metal connectors which would then be soldered at each end. A lot of the case attachments would have to be upgraded to screws, and the screw sockets would have to be changed from plastic one-time-use to metal or some more solid material. You'll be stuck with stagnated motherboard layouts to fit a chassis that lacks new style connector holes, or you'll have to make snap-out holes in the case in the hopes that you'll have about the right shape for a connector which will be invented 6 years from now.
  This adds cost, weight, materials consumed during construction, reduce efficiency (material resistance), and it will increase the chances of a failure of a connection (because instead of one clean solder you'll have two solders and a non-hardened connection that is more subject to bumps and/or wear). So you'll have a heavier machine that's bigger and cost more to produce and whose production had more environmental impact, in order to accommodate a capacity that almost none of your customer base is going to want to do.
  Is building laptops with completely modular "green"? I'd say "no". At a certain point, building unnecessary function into devices makes them more wasteful. If 95% of your customer base is not going to use a function and that function adds 10% to the materials or energy consumed making your device, then you are making a poor environmental deci
  
  --
  "This post contains words, known to the State of California to cause thought. Wash brain thoroughly after reading."
20. Re:Easy recycling? by StayFrosty · 2010-11-08 10:14 · Score: 1
  
  I know I'm not the parent, but I've been doing this for ages as well.
  
  The CPU and Blu-ray should be pretty straightforward. Most/all laptops use standard optical drives already. Pull the old drive out--usually it's held in with one or 2 screws. It should be marked on the bottom with a picture of a CD next to it. Once the screws are removed it should slide out of the case. If the back of the drive has what appears to be slightly-smaller-than-standard SATA ports you need a SATA drive. Otherwise you need an IDE drive. You can get slimline drives from newegg or just about anywhere. When you get the new drive there's a chance you may have to swap the front bezel but they can normally be swapped pretty easily.
  
  CPU swaps out about the same as a desktop. find out what socket it uses, but a compatible CPU and install it.
  
  GPU is probably not worth the effort if it can be upgraded at all.
  
  --
  "Frequently wrong, never in doubt."
21. Re:Easy recycling? by pslytely+psycho · 2010-11-08 12:28 · Score: 1
  
  Thanks for the advice. I am a truck driver and not a tech specialist. Just have a deep interest in tech. It's appreciated!
  
  --
  Donald Trump, on a crusade to make Nixon look respectable
22. Re:Easy recycling? by Coren22 · 2010-11-09 08:24 · Score: 1
  
  Where did happy go in the definition?
  
  --
  APK likes to ask for responses to the same things over and over. Maybe he just likes the responses?
23. Re:Easy recycling? by RealGrouchy · 2010-11-10 07:44 · Score: 1
  
  The large laptop manufacturers will resist this because it conflicts with their "built in obsolescence" design principles.
  If you don't ask, you don't succeed. I think lots of people don't even bother trying to get replacement parts because they assume they're not available.
  At work, my boss wanted to replace a $1000 Xerox printer because it wasn't working well. After some convincing on my part, I phoned Xerox and had them ship us the $2.42 piece of plastic to us, which arrived the next day.
  For all the other ways Dell sucks, when I dropped my laptop and the hinge broke (after the warranty expired), I was able to order a new one for $12 plus shipping. The replacement hinge was of a sturdier design than the original. I've also replaced and repaired other parts, using step-by-step instructions Dell has on their own website.
  That ability to self-service, (plus Windows XP and normal touchpad buttons) is why I stuck with Dell when I replaced my laptop this year.
  - RG>
  
  --
  Hey pal, this isn't a pleasantforest, so don't waste my time with pleasantries!
Not really a new concept... by Antony+T+Curtis · 2010-11-08 05:28 · Score: 2, Informative

Back in the 1990s a Taiwanese manufacturer, Clevo, made "kit" laptops so that OEMs can pick and choose which parts they want for their laptops.
These laptops were incredibly easy to assemble and disassemble. As an OEM, you can choose what kind of screen and what resolution/size, what motherboard, what cpu, what kind of battery, choose between trackpad, mini trackball or trackpoint... It also made it somewhat easy for people to upgrade their laptop. Even a choice of docking station all the way up to sophisticated docking stations which can have PCI/ISA cards installed.
Computers just aren't as customizable nowadays.

--
No sig. Move along - nothing to see here.
1. Re:Not really a new concept... by rjstanford · 2010-11-08 05:38 · Score: 1
  
  You mean that laptop shoppers want a laptop in which every component is sized to meet the maximum likely size of any possible compatible device, plus extra space for a subcase and connectors? Really? Laptop shoppers?
  
  --
  You're special forces then? That's great! I just love your olympics!
2. Re:Not really a new concept... by magarity · 2010-11-08 05:41 · Score: 2, Informative
  
  Several of Clevo's models are still like that, especially the larger ones. Shop outside the box and you can find lots more options in laptops.
3. Re:Not really a new concept... by He+who+knows · 2010-11-08 05:43 · Score: 1
  
  Computers just aren't as customizable nowadays.
  That is because there is more profit to sell a new laptop to the consumer every few years than to sell a few parts to keep their old laptop working.
4. Re:Not really a new concept... by Duradin · 2010-11-08 05:46 · Score: 1
  
  Perhaps they count "desktop replacement" behemoths as actual laptops or they're expanding laptop to include luggable and portable.
5. Re:Not really a new concept... by transfatfree · 2010-11-08 05:50 · Score: 1
  
  if places like best buy charged the "laptop user muggles" a premium for upgrading, im sure they would bite
6. Re:Not really a new concept... by vlm · 2010-11-08 06:08 · Score: 2, Funny
  
  You mean that laptop shoppers want a laptop in which every component is sized to meet the maximum likely size of any possible compatible device, plus extra space for a subcase and connectors? Really? Laptop shoppers?
  I don't think you understand laptop shoppers. Well in excess of 99% of laptop sales are:
  1) The hot saleswoman convinced the head of IT to buy quantity one thousand of her mfgr / brand / model despite him not even getting a date. Or if no saleswoman, there were box seats professional sports tickets involved.
  Or
  2) My mom wants to spend $500 on a laptop. Go to Best Buy and take the $499.99 laptop off the shelf. Mission accomplished.
  
  --
  "Science flies us to the moon. Religion flies us into buildings." - Victor Stenger
7. Re:Not really a new concept... by mlts · 2010-11-08 06:28 · Score: 1
  
  Sager used to use Clevo as the OEM, and those were quite customizable. Want three HDDs? Go for it. A slot with a generic MP3 player? Yep. The laptop could even use desktop chips (say b-bye to your battery life, but for LAN parties, it was essentially desktop performance.)
  I also miss standardized docking stations. IBM, HP, and Dell used to have nice docking stations which could not just allow for USB connections to be done, but additional PCI cards, better video, and would provide decent security against a smash and grab.
  Clevo is still around, but I'm not sure if their stuff is as modular as in the early part of the 2000s though. I think people rather have a smaller size than customizability... as the race is to go thinner/lighter above all else, it seems.
8. Re:Not really a new concept... by ksandom · 2010-11-08 08:49 · Score: 1
  
  Yeah, this reminded me of the old thinkpads which were completely modular at one point. I'm not sure if they still have any models that are. I have one from a few years ago which is leaning towards no.
  
  --
  Funnyhacks - Wierd, unusual, and fun hacks
9. Re:Not really a new concept... by Rakishi · 2010-11-08 09:26 · Score: 1
  
  Apple's sales figures would like to disagree with you.
10. Re:Not really a new concept... by arose · 2010-11-08 09:54 · Score: 1
  
  I think people who want to spend a blank check on a laptop fall under 2.
  
  --
  Analogies don't equal equalities, they are merely somewhat analogous.
Or alternatively... by EriktheGreen · 2010-11-08 05:41 · Score: 1

.. build a machine that's capable of disassembling laptops (or other electronic waste) into its component materials for recycling.
Bonus: The technology would be worth millions, because there's many years of old electronic (and other) waste sitting around to be had for the taking, including in landfills and other locations. The problem with trash is that no one likes to separate out the organics from the recyclables from the re-usables. We humans don't even like to throw trash away in multiple places (like keeping a separate recycle bin and compost) so letting us be lazy and having the machines do the sorting is a big win.
Ultimately manufacturers must make sure their products and packaging are environmentally friendly as possible, of course. It would also be nice if they designed the products to be disassembled and reassembled, making repairs easier (repair instead of replace generates less waste).
It's probably unrealistic to expect products to be 100% landfill free through... new products take advantage of new materials and technologies, and the ability to dispose of something new cleanly always lags behind the ability to produce and use it...
Erik
1. Re:Or alternatively... by drcheap · 2010-11-08 05:44 · Score: 2, Funny
  
  .. build a machine that's capable of disassembling laptops (or other electronic waste) into its component materials for recycling.
  I find that a sledge-o-matic(tm) works quite well. I'm sure I could automate that by attaching it to some hydraulics or something ;)
2. Re:Or alternatively... by vlm · 2010-11-08 06:00 · Score: 1
  
  .. build a machine that's capable of disassembling laptops (or other electronic waste) into its component materials for recycling.
  Depends how you define "component materials" and "recycling". There are innumerable levels not just binary yes no. I can't see reusing much above the molecular level, so you're talking about grinding to a fine powder and using the powder as kind of a "laptop ore" to be refined, which takes boatloads of energy. Worth it for rare earths, not so much for polymerized dinosaur, and by weight most of it will be polymerized dinosaur. The other problem is disposal of mixed "waste". Contaminated silicon is not too useful at a chip foundry, so first idea is dump it on a beach, oh except for the lead solder content. Maybe this is how Chinese plastic kids toys get filled with lead? So the plastic will be useless commercially, may as well burn it (which in a bonfire in a backyard is a dumb idea, but in a properly designed incinerator is perfectly safe, guess which solution is cheaper?)
  
  --
  "Science flies us to the moon. Religion flies us into buildings." - Victor Stenger
3. Re:Or alternatively... by EriktheGreen · 2010-11-08 06:21 · Score: 1
  
  Interesting... you're assuming a specific method of recycling then proceeding to poke holes in what you believe I'm suggesting. This is an excellent example of a "straw man" argument.
  What I'm actually suggesting is a technology that isn't developed yet... machines that could separate any given item into its component parts with a high degree of accuracy and speed. This may mean a process where the first stage is "chop it into small bits" or it may not. There are other approaches.
  Yes, it'll take energy. Just about everything does :)
4. Re:Or alternatively... by vlm · 2010-11-08 06:38 · Score: 1
  
  What I'm actually suggesting is a technology that isn't developed yet...
  
  aka Magic. I feel if you're depending on magical thinking to make it work, you're better off with a more versatile unicorn like a Mr Fusion to provide infinite free energy, and pushing the waste into existing well developed refining technology using that free energy.
  
  Interesting... you're assuming a specific method of recycling then proceeding to poke holes in what you believe I'm suggesting. This is an excellent example of a "straw man" argument.
  No, I was providing the best currently available real world technology to meet your goal, and then poking holes in it. If I knew magical thinking was part of the business plan I'd probably go full star trek technobabble instead.
  
  Yes, it'll take energy. Just about everything does :)
  
  Unless you accomplish a miracle of 100% recycling and sell all the parts at a profit, you'll have some manner of concentrated semi-toxic waste to dispose of, perhaps at greater expense than just dumping it all, in bulk, into the sun or a volcano or something. The EPA and OSHA costs of a big pile of lead and lead contaminated "stuff" cannot just be waved away, nor the energy costs of continuous Q+A to make sure you're recycled plastic for kids toys isn't full of lead.
  Its easily possible to get a test tube or lab scale process that "works" but still have an overall system failure due to other economic costs.
  
  --
  "Science flies us to the moon. Religion flies us into buildings." - Victor Stenger
5. Re:Or alternatively... by mlts · 2010-11-08 06:48 · Score: 1
  
  Agreed. At the lowest level, "Laptop ore", or ground up e-waste would take a lot of energy to recycle:
  First, thermal depolymerization. This takes a lot of electricity to turn the long chain plastics back into short chain crude. It also takes a lot of water. However, one does get usable oil for this method.
  Second, after the organics are dealt with, filtering that out, so you have a pile of minerals and metals. Separating that will be annoying because there will be so many items to filter out, be it copper, rare earths, lead, and other stuff.
6. Re:Or alternatively... by EriktheGreen · 2010-11-08 07:21 · Score: 1
  
  Heh... so I'm either depending on "magic", which won't work because magic doesn't exist, or I'm using a method that generates toxic waste, and therefore it won't work because I'll have disposal problems. Sounds a lot like you're looking for justification for a conclusion you've already reached, instead of the other way around. Just because you can't imagine how to do something doesn't mean it won't work.
  Technology not invented yet isn't the same as magic, and as you note it isn't the same as "real world" technology... because it's NOT INVENTED YET. See how that works?
  Specifically I was thinking of maybe using the nanoparticle sorting technologies that have been developed in chip size for materials analysis, or maybe a centrifuge based sorting process with the waste liquified. Maybe even building macro scale robotic sorting devices to separate waste at multiple scales. There are many, many approaches, and fortune awaits the first person who comes up with an economically viable one.
  Also, there's nothing wrong with using a lot of energy, just like there's nothing inherently wrong with spending a lot of money, if the result is a net gain. If we remove more garbage (solid, liquid, and gas) from the world than we add, we're moving in the right direction.
7. Re:Or alternatively... by vlm · 2010-11-08 08:06 · Score: 1
  
  Heh... so I'm either depending on "magic", which won't work because magic doesn't exist,
  Well, it inherently limits the usefulness of the discussion. My imagination is different than your imagination doesn't really accomplish anything.
  
  I'm using a method that generates toxic waste, and therefore it won't work because I'll have disposal problems.
  Ah the key to our misunderstanding. Its the inputs that are toxic and they will be output, somewhere. You can't accept tons of lead and heavy metals and strange organic compounds at the intake, and not expect some expense to prove that the plastic baby's nuks at the output are not full of lead. That lead has to go somewhere, and costs of material handling and storage are not eliminated by working/wishing on the disassembly and refining process. In fact, industrial experience shows that the most expensive part of being in the lead chemistry business isn't raw materials or process energy but in safety systems, compliance, cleanup, documentation, lawsuits by anyone tangentially related whom ever gets cancer, etc. You just don't want to get into the business of handling lead if you can possibly avoid it.
  You know the very old claim that supercomputers turn a processing problem into an I/O problem? A magic solution to recycling laptops is merely going to create an "insurmountable" new materials handling and environmental cleanup problem...
  You can also end up with the anti-nuclear fuel reprocessing rules... The danger being a cheap and popular technology could result in fools dumping excess purified organometallics into the river. You or I would never do it, but some fool would. Thus we are not allowed to reprocess nuclear reactor fuel in the USA, and possibly laptop recyclers would be banned for similar reasons.
  
  Just because you can't imagine how to do something doesn't mean it won't work.
  I would disagree in that is usually the case. Many people agree with me on faith healing, astrology, and almost everyone agrees that 99% of human religions must be wrong, etc. I don't see how to make a machine that violates (insert any law of thermodynamics or physics here) and oddly enough that means it won't work.
  
  Specifically I was thinking of maybe using the nanoparticle sorting technologies that have been developed in chip size for materials analysis, or maybe a centrifuge based sorting process with the waste liquified. Maybe even building macro scale robotic sorting devices to separate waste at multiple scales.
  OK interesting but that refining process is only a tiny slice of the overall system of a company that ate old laptops and crapped raw materials and cash. It would also be quite handy for primary inputs not just recycling. Imagine how handy it would be to remove the sulfur or mercury or uranium in coal going to a power plant...
  
  Also, there's nothing wrong with using a lot of energy, just like there's nothing inherently wrong with spending a lot of money, if the result is a net gain. If we remove more garbage (solid, liquid, and gas) from the world than we add, we're moving in the right direction.
  Be careful to keep complete system costs in mind. Which is far from me claiming its impossible. It is, however, possible to end up recycling 10 grams of mercury from alkaline batteries, by burning ten tons of coal at the power plant, thus releasing 100 grams of mercury into the air, net loss by recycling of 90 grams. Agree with you that one anecdote does not disprove an entire generalized industry, but it most definitely proves there exists at least one minefield with at least one mine in it, and probably many more. Also it can be inherently wrong if there is something "better" to be done with the energy or cash, perhaps R+D to economically eliminate the entire polluting process?
  
  --
  "Science flies us to the moon. Religion flies us into buildings." - Victor Stenger
Powerbook G3 Pismo by spopepro · 2010-11-08 05:45 · Score: 1

I don't think there has been a better or more flexible design that the Pismo G3. Swappable drive/battery bays, easy access to nearly all the parts under the keyboard. I could have mine completely apart in 5 min. It even had a separate sound card and a replaceable processor board. Ahh the days when Apple designed pro hardware instead of gadget interfaces...
1. Re:Powerbook G3 Pismo by MrEricSir · 2010-11-08 05:49 · Score: 2, Insightful
  
  On the other side of the spectrum, I was trying to replace the trackpad in my MacBook Pro. It turned out that I had to take out several tiny screws to open the back cover. The trackpad was under the battery, but guess what? The battery is attached with anti-tamper screws!
  I have yet to find a screwdriver that will fit those damn screws. Maybe it's time to rob a Genius Bar?
  
  --
  There's no -1 for "I don't get it."
2. Re:Powerbook G3 Pismo by snookerhog · 2010-11-08 06:04 · Score: 1
  
  Classic. I have one of these on my shelf still. Not sure what the hell I can do with a machine that will only run OS 9...
3. Re:Powerbook G3 Pismo by roc97007 · 2010-11-08 06:06 · Score: 1
  
  Drill 'em out.
  
  --
  Oliver's law of assumed responsibility: If you're seen fixing it, you will be blamed for breaking it.
4. Re:Powerbook G3 Pismo by M.+Baranczak · 2010-11-08 06:12 · Score: 1
  
  On the other hand, I once owned a Mac desktop (can't remember the model, it was from the mid-1990s) that had absolutely the dumbest internal design I've ever seen. I had to completely disassemble the whole thing and remove the motherboard just to get to the RAM slots. And it wasn't particularly compact or portable, so there weren't even any good excuses for making it that way.
5. Re:Powerbook G3 Pismo by vlm · 2010-11-08 06:18 · Score: 4, Informative
  
  The battery is attached with anti-tamper screws!
  I have yet to find a screwdriver that will fit those damn screws. Maybe it's time to rob a Genius Bar?
  Geeze dude hit a (real) hardware store before committing larceny. I believe you're describing a T6 variant, possibly a TS6 or TR6 but certainly a TX6 which looks like a TS with the pins shaped like a TR but it only has 5 pins. Somebody living a mac lifestyle can probably purchase some tools. It'll set you back about as much as a really good cheeseburger, and probably come in handy elsewhere in the future.
  Either that or google will find you the exact answer.
  Note by "real hardware store" I mean the neighborhood place staffed by crabby elderly semi-retired craftsmen, not a big box store with minimum wage morons whom barely know what a hammer is.
  
  --
  "Science flies us to the moon. Religion flies us into buildings." - Victor Stenger
6. Re:Powerbook G3 Pismo by demonbug · 2010-11-08 06:29 · Score: 1
  
  http://www.applecomponents.com/?search_within=1&p=all_items&last_cmp=&last_cat=Service+Parts%3A+Screws&s=driver
  
  Sweet, even Apple screwdrivers are hugely overpriced. $50 for a screwdriver? It's not highway robbery, it's Apple. Awesome.
7. Re:Powerbook G3 Pismo by MrEricSir · 2010-11-08 06:39 · Score: 1
  
  Nope, I have a Torx set. I've been to multiple hardware stores, Fry's, and my local hacker's collective. So far, nobody has had the correct screwdriver.
  Just for the record, the screws have a tri-tip notch. It's sort of like a Phillips but with one of the legs missing. The notches don't extend all the way to the ends of the screw, so the screwdriver has to be an exact fit.
  
  --
  There's no -1 for "I don't get it."
8. Re:Powerbook G3 Pismo by vlm · 2010-11-08 06:49 · Score: 1
  
  Is that the Wiha $6 screwdriver with a roughly 500% markup?
  
  --
  "Science flies us to the moon. Religion flies us into buildings." - Victor Stenger
9. Re:Powerbook G3 Pismo by vlm · 2010-11-08 07:05 · Score: 1
  
  my local hacker's collective
  You had me going till there. A "real" hackers collective would have a guy with a lathe and a milling machine and a dremel grinder and you'd go home with a homemade bit made out of an old piece of rebar. And a set of homemade straight slot metric brass screws to use instead of the trilobes.
  
  Just for the record, the screws have a tri-tip notch. It's sort of like a Phillips but with one of the legs missing. The notches don't extend all the way to the ends of the screw, so the screwdriver has to be an exact fit.
  My guess is a wiha number 71952, about $7 but if you're paying list price you're doin it wrong.
  http://www.wihatools.com/200seri/284_TW_and_TS.htm
  Or you can go to the apple websites and pay $50, your choice.
  A bit of time with a digital dial caliper and some google would verify the exact size. Or you could purchase a large assortment kit of numerous "security bits" and become either the terror of the town, the hero of the wannabe hacker collective, or quite possibly both.
  
  --
  "Science flies us to the moon. Religion flies us into buildings." - Victor Stenger
10. Re:Powerbook G3 Pismo by Nimey · 2010-11-08 07:10 · Score: 1
  
  Debian should be able to install on it, or Yellow Dog Linux, which is targeted specifically at Mac hardware.
  
  --
  Hail Eris, full of mischief...
  
  E pluribus sanguinem
11. Re:Powerbook G3 Pismo by Archangel+Michael · 2010-11-08 07:30 · Score: 1
  
  http://www.harborfreight.com/100-piece-security-bit-set-91310.html
  
  --
  Agent K: A *person* is smart. People are dumb, stupid, panicky animals, and you know it.
12. Re:Powerbook G3 Pismo by Mydnight · 2010-11-08 07:52 · Score: 1
  
  Nintendo uses this same screw for a lot of their products (portable systems in particular). You may be able to get ahold of the driver at places that cater to console modders.
13. Re:Powerbook G3 Pismo by MrEricSir · 2010-11-08 08:21 · Score: 1
  
  But they'd also probably want to remove the hardware, install Gentoo, and put it inside a stolen payphone to use as a Skype device. (If they haven't done that already.)
  And yeah, the Mercedes Logo screwdrivers on that page look right. Too bad I don't know which one fits...
  
  --
  There's no -1 for "I don't get it."
14. Re:Powerbook G3 Pismo by Wyatt+Earp · 2010-11-08 10:21 · Score: 1
  
  Yep, I have a set of Wiha screwdrivers for home that I got for like 24 dollars. They'll crack any Macintosh.
15. Re:Powerbook G3 Pismo by adolf · 2010-11-08 12:32 · Score: 1
  
  Tri-wing? Really? That's not so hard.
  Just buy them straight from China. Free shipping, too.
  (No, they ain't Wiha, Xcelite, or King Dick. They may not be ideal tools to use every day, year after year. But they'll do just fine for occasional jobs.)
  
  --
  Kid-proof tablet..
16. Re:Powerbook G3 Pismo by PipsqueakOnAP133 · 2010-11-08 21:01 · Score: 1
  
  Actually, it's not even Apple. It's some random shop trying to cater to the DIY Apple crowd quick making a quick buck, while working through the idea that if they can afford an Apple, they can afford to get screwed over $50 for a screwdriver.
17. Re:Powerbook G3 Pismo by russotto · 2010-11-09 14:53 · Score: 1
  
  On the other hand, I once owned a Mac desktop (can't remember the model, it was from the mid-1990s) that had absolutely the dumbest internal design I've ever seen.
  Probably the PowerMac 8500.
Slashdotted by mr100percent · 2010-11-08 05:47 · Score: 1

The server is starting to collapse, but at least here's the Youtube link in the article
What a cool class! by nickybio · 2010-11-08 06:04 · Score: 1

Sounds like they basically got free reign to buy some cool laptops, take all their best parts out from inside, and build them into a custom case. To me, it seems like nothing more than a redesigned mac, but I would definitely take that class.
Buzzword Quotient by mpapet · 2010-11-08 06:19 · Score: 3, Interesting

The advertisement is a buzzword masterpiece. You only mentioned one of many flaws.
The goal in this team's Ivy League education is to learn how to string buzzwords together to generate interest in fundamentally flawed ideas.
Good to know the ruling class is staying busy.

--
http://www.maxineudall.com/2010/02/should-economists-be-sued-for-malpractice.html
what we need by roc97007 · 2010-11-08 06:20 · Score: 2, Insightful

...is a new paradigm, one not based on commodity electronic devices that you throw away when they cease working or upgrade bi-yearly to the next semi-greatest thing. Besides being extremely ecologically unfriendly, it's a scam participated on the consumer designed to maximize profits. (The consumer is as much at fault for falling for it, but that doesn't make it less a scam.)
As responsible consumers, we should be looking at devices designed to last significantly past the next design cycle, that are designed to have (at least) the parts replaced that are most likely to fail (screens, drives, batteries), and that meet our current needs, not just elevate our "cool". And then keep them for a long time.
Manufacturers will resist this because they've built their business model on regular forklift upgrades. They'd have to be different companies to evolve beyond this. Probably smaller companies.
eWaste eRecycling is not the answer. It mitigates the problem but does not solve it. Tossing your old device in a recycle bin is not an excuse to replace it at every incremental improvement.

--
Oliver's law of assumed responsibility: If you're seen fixing it, you will be blamed for breaking it.
1. Re:what we need by roc97007 · 2010-11-08 06:23 · Score: 1
  
  I hit submit too soon. I wanted to conclude with: As consumers, we need to be less affected by hype and spend more thought on what our actual requirements are and what they might be over the projected life of a device. We really need to lengthen the upgrade cycle, and companies need to get used to the fact that if they're going to come out with tiny incremental improvements every year, we'll only be buying their devices every fourth or fifth year.
  
  --
  Oliver's law of assumed responsibility: If you're seen fixing it, you will be blamed for breaking it.
2. Re:what we need by jedidiah · 2010-11-08 06:49 · Score: 1
  
  ...actually expecting consumers to be thoughtful about what they want and what they buy.
  You better be careful. Some fanboy might screech at you for being a geek and for having inflated expectations of mere mortals.
  
  --
  A Pirate and a Puritan look the same on a balance sheet.
3. Re:what we need by roc97007 · 2010-11-08 08:24 · Score: 1
  
  I'd submit that geeks are the worst abusers of the device-of-the-month club. It should start with us.
  
  --
  Oliver's law of assumed responsibility: If you're seen fixing it, you will be blamed for breaking it.
4. Re:what we need by roc97007 · 2010-11-08 09:36 · Score: 1
  
  I should also say, upgrades that can be done in software ought not to require a hardware swap. For instance, you shouldn't have to buy a new device in order to get a new app or an app upgrade that doesn't need new hardware.
  I'm not saying we should whine until we get our way, I'm saying we should vote with our feet.
  
  --
  Oliver's law of assumed responsibility: If you're seen fixing it, you will be blamed for breaking it.
5. Re:what we need by fermion · 2010-11-08 10:56 · Score: 1
  
  As consumers we want products we can afford that will do what we want for a reasonable amount of time. Because many costs are externalized, and credit is often expensive to the average person, it is usually the case that it is not affordable to buy a long term product. This si not because of any conspiracy by business owners, this is just life. One can buy a car for $15K that will last 5-10 years with little maintenance, or $50K on a car that will last 20-30 years with regular maintenance. Since most people do not have 50K, and the externalization of costs makes maintenance cost more than purchasing a new car, most people wil not choose the later option, so firms are not going to reach for that market.
  Furthermore there are genuine technological advances that are net readily retrofitting into old kit, at least not without replacing all the relevent parts. This is particularly true with computers. I am not sure what is gained when the only the case of a computer is reused. On the other end, how many years is a microprocessor going to swappable with new models? The reality is that most users could buy a $3000 computer and use it for five years, but most users would rather spend $300 on a new computer every couple years. It might be that if electricity were charged at true market rates, taking into account pollutant costs, and if we were charged real market rates for disposal, the $3000 computer might be viable. But without consumer willingness to pay the real costs of products, the cheap commoditized product is going to win out over the well designed reusable product.
  I saw an example of this years ago when traveling outside the US. The cost for a soft drink was minimal when one either drank it our of a glass bottle at the shop or traded in one glass bottle for another. Basically most houses got crates of glass bottles, which they paid for once, and then just reused. OTOH, if one were to buy a can, then one literaly had to buy the can and then figure out how to get the money back through someone who would remanufacture the can. Since the can was not reusable, and the country did not have a trash industry that depended on people discarding perfectly good products(most families would trow away maybe a couple gallons of trash), the economy was set up for good that could be reused.
  
  --
  "She's a scientist and a lesbian. She's not going to let it slide." Orphan Black
6. Re:what we need by roc97007 · 2010-11-08 12:08 · Score: 1
  
  > As consumers we want products we can afford that will do what we want for a reasonable amount of time. Because many costs are externalized, and credit is often expensive to the average person, it is usually the case that it is not affordable to buy a long term product.
  Yes yes yes. The problem I have is this. I'm going to pick on Apple... just 'cause, but there are many other targets. The original iphone you bought in 2007 still works fine if you haven't physically abused it. Electronics don't wear out that fast. If you already had an iphone, there was no compelling reason to buy a 3G in 2008 and a 3GS in 2009 and a 4 in 2010. Yet people do this, waiting in line each time.
  Again, it's not the iphone -- I know people who get a new Blackberry once a year. I'm sure that'll be true with Android phones also. And cameras -- a photographer friend of mine buys each new model of his particular camera as soon as it comes out to "keep up on technology". I consider myself a decent amateur, and have purchased three camera bodies total in the last 30 years. But I tend to buy expensive pro bodies and keep them for a long time.
  Now, if your car or your washing machine or your phone actually wears out, (or your camera doesn't click) and it's something you really need, you have to fix it (if possible) or replace it. I also understand how the Economics of Quality work -- that rich people often end up paying less over time because they buy higher quality merchandise that lasts longer, whereas less rich people buy lower quality merchandise that lasts significantly less long. (Parenthetically, I'm far from rich, but I try to buy high quality things and keep them for a long time. The cost of credit is a factor, but there is little cost to saving up for it, except of course the loss of immediate gratification.) (Also parenthetically, price is not always an indication of quality. It can also be an indication of mere trendiness, which means you get high prices *and* low quality.)
  I'm not talking about that. (although I'd like to sometime) I'm talking about dumping electronic devices not because they've worn out but because the next wizzy thing has come along.
  
  --
  Oliver's law of assumed responsibility: If you're seen fixing it, you will be blamed for breaking it.
7. Re:what we need by PipsqueakOnAP133 · 2010-11-08 21:06 · Score: 1
  
  Or... install a Sandforce SSD into every common consumer's laptop, marked up for labor, and call it an upgrade.
  It would feel like you just swapped out a 486 for a Quad-Opteron.
  I'd think rust platters recycle easier too than entire laptops.
Re:An Advert Disguised as News by wisty · 2010-11-08 06:21 · Score: 1

At least /. has diversified a bit, it's not from MIT.
Re:Easier for all of us? by mpapet · 2010-11-08 06:22 · Score: 1

If they got rid of most of the screws from these things, it would solve so many problems.
Except most of the screws are a *critical* structural features.

--
http://www.maxineudall.com/2010/02/should-economists-be-sued-for-malpractice.html
Re:A given? by vlm · 2010-11-08 06:26 · Score: 1

Its the expensive indium they're trying to recycle, unless they are complete idiots. By expensive, I mean a couple bucks per gram. At a rate of a couple grams per screen. So, a dumpster full of dead LCDs has maybe "thousands of dollars" worth of Indium in it, more or less. The hard part is separating it from thousands of pounds of polymerized dinosaur and plate glass without spending more than thousands of dollars of labor, energy, and capital expense..

--
"Science flies us to the moon. Religion flies us into buildings." - Victor Stenger
Why not? by phorm · 2010-11-08 06:27 · Score: 1

If modular laptop parts became more common, why shouldn't they also become cheaper?
I really don't see a reason - other than cooling - why we couldn't have drop-in GPUs and various other peripherals. Heck, if they're "slot-in" (card goes in the side of the laptop and locks, similar to the battery or CD-ROM). Then you can have a cheaper GPU if you want, or a more expensive one. It might even save the producers on hardware costs... easier to produce a generic board and sell it with a given slot-in GPU than to have different lines being soldered in (and a LOT easier if there's a defect such as the issue with the NVidia's that were overheating and deballing back in the 8000/9000 series a few years back).
1. Re:Why not? by badran · 2010-11-08 07:47 · Score: 1
  
  It would indeed be a bit cheaper for the manufacturer. But it would also cut into the profits. In this case you can just buy 1 Laptop and 1 Extra GPU instead of 2 laptops.
Re:Wheres the Gel Packs? by Voyager529 · 2010-11-08 06:28 · Score: 1

Obviously B'Elanna Torres was not a part of the design team, if she were
...the instruction manual would be written in Klingon.
We need standards by Yvan256 · 2010-11-08 07:42 · Score: 1

All computer manufacturers would need to make their own wish-list, then sit down with the others and come up with some sorts of standards for the parts.
Given that there's a lot of different laptops available, I would assume a list of form-factors based on current LCD sizes (8.9", 11.6", 13.3", 15", 17", 21"), with options depending on the case size for compact or full-size keyboards, 1.8" and 2.5" bays for SATA hard drives, swapable GPU, standard batteries sizes, etc.
Then add bonuses like having hard drive and optical bays required to have all connectors for either SATA or batteries, meaning you could ditch the optical drive and put a 2nd or 3rd battery in your laptop, or go for a RAID setup.
Grades could be given on the laptops depending on the number of standards they follow.
Re:A given? by Beyond_GoodandEvil · 2010-11-08 07:44 · Score: 1

Not sure why parent was modded a troll. The statement,"It's also a given that e-waste is currently a huge problem
does require citation. Nothing trollish about pointing that fact out.

--
I laughed at the weak who considered themselves good because they lacked claws.
Easy updating? by SEWilco · 2010-11-08 07:44 · Score: 1

It's about time there was the laptop equivalent of a PC case, where you can use standard components inside the case, and repair or upgrade what is in the case.
Yes and no by phorm · 2010-11-08 09:34 · Score: 1

Depends on volume, and how often they can actually sell a second laptop (and whether you're buying from the same vendor).
If I want a laptop that's awesome on battery and mobile, I might buy a cheap little Acer (I have one for work that's surprisingly good, especially when running 'nix), but if I wanted a powerful machine with lots of RAM and a good GPU, perhaps a Dell/HP/Toshiba/etc
So in the case of an add-on GPU, that's two sales for one vendor.
Arrrrrgh by kuzb · 2010-11-08 10:09 · Score: 1

NO. NO DISASSEMBLE JONNY 5!

--
BeauHD. Worst editor since kdawson.
Woo... hoo? Welcome to 1994 by Petersko · 2010-11-08 11:34 · Score: 2, Interesting

So they copied a very early Mac Powerbook design. I serviced them in the early 90's, and it was 15 seconds to disassemble - and it looked an awful lot like the breakout in the article.

Go, Stanford!