'Darkness Ray' Beams Invisibility From a Distance

KentuckyFC writes "Optical engineers generally build imaging systems with the best possible resolving power. The basic idea is that an imaging system focuses light into a pattern known as a point spreading function. This consists of a central region of high intensity surrounded by a concentric lobe of lower intensity light. The trick to improving resolution is narrowing and intensifying this central region while suppressing the outer lobe. Now optical engineers have turned this approach on its head by suppressing the central region so that the field intensity here is zero while intensifying the lobe. The result is a three-dimensional beam of darkness that hides any object inside it. The engineers say this region can be huge — up to 8 orders of magnitude bigger than the wavelength of the imaging light. What's more, the optics required to create it are simple and cheap: a lens consisting of concentric dielectric grooves. The team has even tested a prototype capable of hiding a 40-micrometre object in visible laser light."

Comments

Pictures or it didn't happen

[myth24601]

Pictures or it didn't happen.

Babinet called, wants his principleback.

[goombah99]

I think they must have skipped the chapter in their basic handbook of optics called Babinet's principle. Because they just re-invented Babinet focusing.

Re: Babinet called, wants his principleback.

[goombah99]

I think they must have skipped the chapter in their basic handbook of optics called Babinet's principle. Because they just re-invented Babinet focusing.

By the way, an insightful thing to ponder here is, what happens to the light rays that were aiming for the center? (yes you can use a ray-optic basis set and still have interferrence). Well they were not in the beam! In a plane wave basis set, you would say, well all the plane waves with that K-vector were missing. Thus it's really simple to figure out how to create a dark spot. Just take an axiconically focused beam. Delete all parts of the axicon which focus in the dark region and replace them with any part of the axicon that focuses outside the dark region. Bam. that's it.

Did this myself a decade ago when I wanted arrays of dark spots in focused light. Why would I want that? I was trying to get the same effect as self fillamentation. but without non-linear effects in the media. That way I could create long arrays of ionized spots in the air, and use this to direct lighting beams.

Recently the military created a lightning weapon based on this.

But axicons and babinets prininciple this has been known for centuries.

Please move on. There is nothing to see here ;-)

[140Mandak262Jamuna]

It has been easy to make objects invisible from time immemorial. Even though till about 14th century people did not really understand vision, and they thought some kind of rays emanate from the eyes that allows them to perceive it, they knew how to make objects invisible. Just turn the light off. Put it in a dark room without light, and no one can see it!

The technique here is a marginal improvement for practical purposes. There is a light in the room, still you can't see the object, objects that could be as much as 8 wavelengths of that monochromatic light, placed at the correct location. If there is any other source of light, the objects would be plainly visible due to scattering of that light. So it would be impractical to make an invisibility cloak out of it. You need to make the object disappear from all sources of light from all directions.

Though the technique is not going to lead to invisibility cloak, it is probably a great achievement to hide an object when there is one light source. Though people would think is 1 is pretty close to zero, in reality, there is a huge difference between 1 light source and no light source. It is a good great achievement, collect your brownie points scientists.

For others, please move on there is nothing to see here.

DOOMED

[TheRealHocusLocus]

As the beam of darkness brushes across the switch for that would turn it off, then expands to envelop us all in not-light and not-dark. Other things, rogue side-effects of tortured physics nonetheless mediated by gravity, the force nature uses to keep its mistakes firewalled from each other. Cubits and qubits swirl in maelstrom like the brief screaming hiss of a black hole drifting past you on a foul orbit around the center of the Earth leaving sublimely beautiful ellipses of not-matter as its event horizon expands by degree infinitesimal, unobserved but never unnoticed but by those for whom valuable body parts have been thus punctuated, the steady rhythm of science gone mad merging with the jeering laughter of the unquiet dead.

Until we all drown in the bile in the gullet of Schrodinger's cat.

Then nature hands up a sign near the incomprehensibly entangled remnant of our solar system which says.

THIS RIDE IS CLOSED
SORRY FOR THE INCONVENIENCE

Re:Invisibility cloak!

[Ashenkase]

So THATS where all my socks went to!

references

[goombah99]

Here's some recent articles on the topic of shaping light beams so it curves or has extended focal range or dark spots

by the way the "lightning" redirection problem we originally of interest not as a weapon but to create virtual lightning rod arrays in the air to discharge destructive lightning harmlessly. Why? well back then there had been a few great arpanet outages and people realized how vulnerable we were ebcoming to lightning stikes as we depending on the ubiquitous internet to always be able to route around problems. turned out this was a weak point. I suspect it may have become less of one now in part because optical fiber now carries stuff. But I don't know. But it was the utility companies paying for the research at the time.

lightning weapon using self filamentation:
http://www.army.mil/article/82262/Picatinny_engineers_set_phasers_to__fry_/

curving light "beams"
http://www.newscientist.com/article/dn16936-curved-laser-beams-could-help-tame-thunderclouds.html

forming a pseudo non-diffrating "beam" --- which is a totally wrong way to describe this.
http://www.mtu.de/en/technologies/engineering_news/others/Menges_Forming_non-diffracting_beams_en.pdf

that too was applied to the lighning problem

even a slashdot articlee referencing that:
http://science.slashdot.org/story/09/04/15/0147234/curved-laser-beams-could-help-tame-lightning

a patent:
http://www.google.nl/patents/US6937791

Re:references

[goombah99]

"forming a pseudo non-diffrating "beam" --- which is a totally wrong way to describe this."

Hum... Why?

Imagine you took a lens, bored out the center and put another lens in the middle with a different focal length. now you shine a beam of light through this. what happens in the far field is you get two focal spots. You might have been thinking one would be a donut, but as Babinet will tell you, that donut part disappears in the focal region.

  This is the crude, but easy to visualize, version of what these investigators did. One can do this more cleverly. Add more focal spots by adding concentric rings of different focii. in fact if you just make a really bad fresnel lens where you have constant curvature on each lenslet ( picture a triangle wave in glass) then you get an array of spots.

An axicon is just continuous limit of that discrete process.

it creats what looks like a beam that never difracts. but in reality is is just a bunch of separate focal spots that have merged in to a line giving that appearance.

why is this not a beam: None of the photon the form the first spot in the line actually pass through last spot. infact if you block the first spot in the "beam" it doens't stop the "beam" !

Re:references

[CreatureComfort]

These are the type of discussions that keep me coming back to /.

Reinvention of chromeless phase-shift lithography?

[craighansen]

What this paper describes is basically using a phase-shift mask to produce a dark spot. There are established techniques for doing this in microlithography, known as "chromeless phase-shift lithography" (CPL). In lithography, one is generally trying to produce patterns of relative light and dark regions that are very small, so there's an emphasis on making thin lines, tiny contact spots, and sharp corners. But a CPL mask can produce fairly arbitrary patterns. For example, a dense checkerboard of zero and pi phase shift regions can produce a large region of region of relative darkness that could be much larger than the single point described in the paper. In practice, a large region can also be produced using conventional "chromed" lithography - a dark spot in the mask produces a dark shadow in the region behind it - but people wouldn't be so impressed by using a mask with a dark spot in it to produce a "three-dimensional beam of darkness."

Finally, proof the light bulb dark absorber theory

[Anonymous Coward]

Light bulbs are not actually "light bulbs" but dark absorbers. When you turn them on, they suck the dark out of the room. You can prove this by holding your hand under a "light bulb". The dark will stack up under your hand where its path to the absorber is blocked by your hand. When they quit working and turn a dark color, it's not because they burnt out, it's because they're full.

Re:Invisibility cloak!

[Garridan]

You don't want this "invisibility cloak". You'd have a big fucking red lazer ring painted around you. And there'd be a big empty black patch in the middle. And some random archer is walking his dog in the next park over, and whammo! He empties his quiver into you, thinking it was a deliberate target set up. Only upon retrieving his first bloody arrow to discover that he's a murderer. Good job, assole, you ruined the archer's life.