Slashdot Mirror
Putting a MacBook Pro In the Oven To Fix It
An anonymous reader writes: A post at iFixit explains how one user with a failing MacBook Pro fixed it by baking it in the oven. The device had overheating issues for months, reaching temperatures over 100 C. When it finally died, some research suggested the extreme heat caused the logic board to flex and break the solder connections. The solution was to simply reflow the solder, but that's hard to do with a MBP. "Instead, I cracked open the back of my laptop, disconnected all eleven connectors and three heat sinks from the logic board, and turned the oven up to 340 F. I put my $900 part on a cookie sheet and baked it for seven nerve-wracking minutes. After it cooled, I reapplied thermal paste, put it all back together, and cheered when it booted. It ran great for the next eight months." The laptop failed again, and another brief vacation into the oven got it running once more.
I dont think telling people you can fix a mac book by baking it will end well. So perhaps a disclaimer saying NOT to do this would be in order?
"Have you ever thought about just turning off the TV, sitting down with your kids, and hitting them?"
Hipster "invents" the reflow oven and blogs about the "invention" in amazement.
http://en.wikipedia.org/wiki/R...
AntiFA: An abbreviation for Anti First Amendment.
You obviously haven't figured out how Apple works...
...Or better yet apply enough solder correctly the first time....
But... but... but... but... I thought Apple's build quality was the best there can be?!?!?
The product only has to last until the next incremental improvement is available.
Oliver's law of assumed responsibility: If you're seen fixing it, you will be blamed for breaking it.
You can quickly charge your iPhone 6 by putting it in the microwave on high for 3 minutes. Try it, it works great!!!
"I say we take off, nuke the site from orbit. It's the only way to be sure."
340 degrees fahrenheit isn't hot enough to reflow solder. The best I think that would do would to cause warpage of the board in the other direction. The fact that it failed again later, and then worked for a while after 'baking' it again, supports this.
Would not recommend, if for no other reason than the average person would either wreck something trying to get it apart, or not be able to get it all back together again afterwards.
Are YOU using the TOOL, or is the TOOL using YOU? Think about it!
Unfortunately the defects were in the chips they sourced from nVidia and to a lesser extent ATI/AMD, and there's little computer manufacturers could do to avoid it. It's true that Apple runs components fairly hot to reduce fan noise and that accelerated some failures, but the real culprit was the early attempts at lead-free solder companies were using to meet new RoHS standards.
How can I believe you when you tell me what I don't want to hear?
A heat gun requires you to know where to heat. An oven does not.
Not only will the microwave fixe it but it will charge the battery too.
Some drink at the fountain of knowledge. Others just gargle.
I still do this from time to time, only without the extreme overkill of using an oven.
As the lucky owner of one of these fine computers which were outfitted with overperforming nVidia GPUs, every few months I run into similar problems. While I could go a little over the top in addressing the issue, all I really need to do is turn the thing upside down, remove the bottom cover, loosen the heat sink covering the GPU and then turn the poor thing on and let it run for up to half an hour. Since the GPU runs hot enough to loosen its own solder, it also runs hot enough to put it back.
Eventually entropy will catch up with me and the poor thing will die of some other cause, and I will have to let it go. But until then, a little heat-related abuse can be a good thing.
Wouldn't this method melt (and thus remove) tin whiskers, since they are so incredibly thin? Perhaps -that- was his problem, not broken joints.
For large sets, this will be our guide even unto death, for the LORD will work for each type of data it is applied to...
Try baking him in the oven for 7 minutes at 340 F.