Slashdot Mirror


Military Blimp Breaks Free and Drifts Over the Mid-Atlantic Trailing Tether (baltimoresun.com)

McGruber writes: The Baltimore Sun reports that a military surveillance blimp has broken free of its mooring at Aberdeen Proving Ground in Maryland and was last seen drifting at 16,000 ft over Pennsylvania. The 243-foot-long, helium-filled JLENS (Joint Land Attack Cruise Missile Defense Elevated Netted Sensor System) aerostat detached from its mooring at about 11:54 a.m. Wednesday. It was trailing approximately 6,700 feet of cable. "Anyone who sees the aerostat is advised to contact 911 immediately," spokeswoman Heather Roelker said. "People are warned to keep a safe distance from the airship and tether as contact with them may present significant danger."

4 of 196 comments (clear)

  1. Catastrophic Failure? by RumGunner · · Score: 5, Interesting

    FTFA: "Raytheon, the contractor that makes the blimps, says the cable is unlikely to break.

    "The chance of that happening is very small because the tether is made of Vectran and has withstood storms in excess of 100 knots," the company said on its website. "However, in the unlikely event it does happen, there are a number of procedures and systems in place which are designed to bring the aerostat down in a safe manner.""

    So what exactly happened? The cable broke, AND they are unable to get the blimp to safely land?

  2. Re:Should have used Duck Tape by Anonymous Coward · · Score: 5, Informative

    Both duct tape and duck tape are acceptable. In fact if anything "duck tape" is the more correct answer. From wikipedia:

    The first material called "duck tape" was long strips of plain cotton duck cloth used in making shoes stronger, for decoration on clothing, and for wrapping steel cables or electrical conductors to protect them from corrosion or wear.[2] For instance, in 1902, steel cables supporting the Manhattan Bridge were first covered in linseed oil then wrapped in duck tape before being laid in place. ...

    After the war, the duck tape product was sold in hardware stores for household repairs. The Melvin A. Anderson Company of Cleveland, Ohio, acquired the rights to the tape in 1950.[15] It was commonly used in construction to wrap air ducts.[19] Following this application, the name "duct tape" came into use in the 1950s, along with tape products that were colored silvery gray like tin ductwork

    https://en.wikipedia.org/wiki/Duct_tape

    I love nothing more then proving pedantic fools wrong. :)

  3. Re:Jets scrambled... by Anonymous Coward · · Score: 5, Funny

    Nah, they're going to escort it to Massachusetts where the Patriots experts in deflation will careful deflate it for them.

  4. Re:Should have used Duck Tape by schwit1 · · Score: 5, Funny
    I love nothing more then proving pedantic fools wrong. :)

    'than'