If you're getting "electrical noise" through an SD card, it means it's acting like an antenna and dumping random EMR into your system-- Which is why most SD card slots are wrapped in METAL.
Wrap it in metal all you want, but if the same DC current supply is also feeding the DAC and the amplifier then shielding isn't your only concern. I'm not saying that these cards are worth paying for, but noise can come from anywhere.
The primary shielding should be on the DAC - why filter only one source?. But shielding isn't all - it introduces noise to the DC current as well. Your DAC and amplifier both run on the same DC circuit and need some extra power conditioning (even in small devices) to make sure you get a clean signal.
They are already our overlords. Mice are merely the protrusion into our dimension of hyper-intelligent pan-dimensional beings. This DNA only grows the brain further into our three dimensions.
NO, it is NOT mandatory for an EMV card to have contactless payment.
That doesn't make contactless payment any less of an EMV standard. Not THE standard. A standard. Saying "EMV has nothing at all to do with RFID cards" is ridiculous.
You can't even say Chip and PIN has nothing to do with RFID cards, because it's the same chip running either operation if the antenna is there. It's true that not all Chip and PIN cards implement contactless, but they are highly related.
The EMV web site disagrees with you. Just because they used existing communication standards for their specification doesn't mean it's not contactless EMV.
so Apple pay will only be helpful to a handful of the population
That depends - all it requires is NFC so they could offer an Android app if they wanted to truly be competitive.
Your card number isn't stored on the phone with Google Wallet or Apple Pay. It just relays the one-time pad to link payment to the remote end. You don't have to do any more than uninstall an app and deauthorize the device.
I don't use it, but I don't see it as being as bad as you say.
Yes, it does. EMV specifies both a contactless and a direct chip contact method. It just so happens that contactless EMV matches the specifications of PayPass and PayWave. Which makes sense, considering they are the M and V of EMV.
At the very least, you can't get your card number stolen from the chip reader. That data is encrypted between you and the payment processor. But if the clerk then physically takes the card to compare with a signature, they can take a discreet photo of the number (not an imprint - embossing is done for good). Chip and PIN gives you a little more security in this regard.
PINs, plural. I have five different cards just because the banks are willing to give me free money to open a credit account and make one purchase - even if I pay it off immediately. Most of those cards haven't seen use in years, but it's hard to say no to free money.
My wife signed up for a brand new American Express card to make a bit of a larger purchase we were going to make anyway this month. She's getting a year of Amazon Prime for free and a $200 statement credit in a couple months for spending less than $2000 at no interest.
Yeah, that rubber thing that forces me to type my PIN more slowly making it more likely someone can see me enter the numbers even if they can't see the keys. I enter my PIN on the order of about 1 second total without the shade and about 3 seconds with it.
Target has them. So does Wal-Mart and my local grocery store. Anyone who's replaced card readers in the last year or so most likely has them. Otherwise, why buy the equipment early if so few people have the cards? The liability shift doesn't happen until this fall.
OK - to be fair, while the WRT54G line was in production, I only used those. Never used anything else until they were done. Once the antenna was built-in rather than user-replaceable was the beginning of the end.
I did own a BEFSR41 before that and that was garbage, but I don't think I had even heard of DD-WRT then.
Slashdot Mirror
Listen to some loud music for a while. You'll lose those upper frequencies and won't care anymore.
If you're getting "electrical noise" through an SD card, it means it's acting like an antenna and dumping random EMR into your system-- Which is why most SD card slots are wrapped in METAL.
Wrap it in metal all you want, but if the same DC current supply is also feeding the DAC and the amplifier then shielding isn't your only concern. I'm not saying that these cards are worth paying for, but noise can come from anywhere.
The primary shielding should be on the DAC - why filter only one source?. But shielding isn't all - it introduces noise to the DC current as well. Your DAC and amplifier both run on the same DC circuit and need some extra power conditioning (even in small devices) to make sure you get a clean signal.
Misleading headline. They offer Windows or Linux. Ubuntu is what they chose for their Linux instances.
They are already our overlords. Mice are merely the protrusion into our dimension of hyper-intelligent pan-dimensional beings. This DNA only grows the brain further into our three dimensions.
NO, it is NOT mandatory for an EMV card to have contactless payment.
That doesn't make contactless payment any less of an EMV standard. Not THE standard. A standard. Saying "EMV has nothing at all to do with RFID cards" is ridiculous.
You can't even say Chip and PIN has nothing to do with RFID cards, because it's the same chip running either operation if the antenna is there. It's true that not all Chip and PIN cards implement contactless, but they are highly related.
The EMV web site disagrees with you. Just because they used existing communication standards for their specification doesn't mean it's not contactless EMV.
so Apple pay will only be helpful to a handful of the population
That depends - all it requires is NFC so they could offer an Android app if they wanted to truly be competitive.
Your card number isn't stored on the phone with Google Wallet or Apple Pay. It just relays the one-time pad to link payment to the remote end. You don't have to do any more than uninstall an app and deauthorize the device.
I don't use it, but I don't see it as being as bad as you say.
EMV has nothing at all to do with RFID cards
Yes, it does. EMV specifies both a contactless and a direct chip contact method. It just so happens that contactless EMV matches the specifications of PayPass and PayWave. Which makes sense, considering they are the M and V of EMV.
At the very least, you can't get your card number stolen from the chip reader. That data is encrypted between you and the payment processor. But if the clerk then physically takes the card to compare with a signature, they can take a discreet photo of the number (not an imprint - embossing is done for good). Chip and PIN gives you a little more security in this regard.
PINs, plural. I have five different cards just because the banks are willing to give me free money to open a credit account and make one purchase - even if I pay it off immediately. Most of those cards haven't seen use in years, but it's hard to say no to free money.
My wife signed up for a brand new American Express card to make a bit of a larger purchase we were going to make anyway this month. She's getting a year of Amazon Prime for free and a $200 statement credit in a couple months for spending less than $2000 at no interest.
little "shades" for CC terminals
Yeah, that rubber thing that forces me to type my PIN more slowly making it more likely someone can see me enter the numbers even if they can't see the keys. I enter my PIN on the order of about 1 second total without the shade and about 3 seconds with it.
They are wrong
If the card is stolen, the retailer is liable instead of the CC company. Read up on the liability shift.
Target has them. So does Wal-Mart and my local grocery store. Anyone who's replaced card readers in the last year or so most likely has them. Otherwise, why buy the equipment early if so few people have the cards? The liability shift doesn't happen until this fall.
EMV includes a contactless variation that Apple Pay implements.
OK - to be fair, while the WRT54G line was in production, I only used those. Never used anything else until they were done. Once the antenna was built-in rather than user-replaceable was the beginning of the end.
I did own a BEFSR41 before that and that was garbage, but I don't think I had even heard of DD-WRT then.
I've moved on to Asus (and Tomato) for now.
Every advance is permanent.
If the world they were mapping was static, then yes, that would make sense. An ever-changing reality requires an ever-evolving dataset.
(Oh, and Belkin has owned Linksys for almost 2 years now.)
That explains Everything. Well...almost. Linksys had been at Belkin's quality level for a few years before that.
This is just a ploy to get you to hand over an unlocked phone without a warrant.
You encrypted her files, too? Not very smart of you.
You can have FB delete your account after you are marked as memorialized. That's one of the options under that setting.
Facebook Graph API should let you do just that. You just need to have a server that will still be paid up and on the Internet when you're gone.
Since the Deadman's switch is external to Facebook, you can use whatever method you want to keep pressing the button.
And why would you be on Facebook if nobody else you know/trust is using it? Kind of defeating the whole point, there.
Not to mention that having a SoC probably enables a more responsive UI for the non-smart portion of the TV.