Kleenex® is a trademarked word. You must edit your post to remove any and all mention of our trademark or we will black list you and you'll have to go back to fapping into an old sock.
Chevy makes a Z-28 Camaro with a 5.7L 525HP V8 engine and sell it as such, with all sales brochures and commercials stating it has a 5.7l 525HP V-8 engine.
They also make a Base model Camaro with a 5 liter V8 making 450HP.
Both models hit their estimated performance targets and all performance testing results show the Z-28 out-performs the base model by the pre-determined percentage. As it should.
Chevy dealers around the nation receive and start selling base models with window stickers stating the base model has a 5.7L 525HP V8 engine. They also receive sales brochures and marketing info stating the same thing.
They sell the cars for 5 months, and someone finally decides to dyno test the base model. They discover it's only putting out 450HP. (As it was designed to do)
Chevy figures out what happened and comes back with an ad in Motor Trend stating, "Oops! Bob forgot to update the specs with the marketing department. sry, LOL. It's operating as intended so suck a fat one and get off my jock, kthnx!"
"...the latest Phoronix end-of-year tests show the AMD Catalyst Linux driver is beating Catalyst on Windows for some OpenGL benchmarks. The proprietary driver tests were done with the new Catalyst "OMEGA" driver. Is AMD beginning to lead real Linux driver innovations or is OpenGL on Windows just struggling?"
1 - Accuse wrong person 2 - Wait for culprit to confess all over the internet and others to post identification of culprits 3 - Arrest (proof of guilt, optional, but not necessary) 4 - Profit!
See that?! They're so thorough they take the ??? outta step 3!
Technically, the risk of flying a plane into a building in New York wasn't zero before 9/11 not because, "although it hadn't happened, it was possible", but because someone already flew a B-25 Mitchell bomber into the Empire State Building
I'll tell you exactly why it crashed. It hit the ground before it was supposed to. When it does that, it's a crash. Don't need no fancy, schmancy NTSB to arrive at that conclusion.
I work at a large organization where we have several thousand computers, most with dual monitors and other peripherals.
It would be very beneficial if this technology allowed us to perform our yearly inventories by simply walking through each room carrying a tablet or laptop which recorded the devices present in each room.
We could then see, easily, if any equipment (like secondary monitors) were moved from room to room without permission.
I note that the Replicator 2 and Replicator 2X share many components.
Will there ever be plans to release an upgrade kit for the Replicator 2 which adds a more powerful Power Supply, Heated Build Plate, and/or a second Extruder Head Assembly?
It would be nice to be able to add those options to the Rep2 in order to print ABS and other materials, or to do multi-color prints.
Follow up Question relies on the proviso that an upgrade kit is planned....
I didn't really think my submission was provocative but, based on the responses, it seems to have incited a lot of negativity for some reason...
I've had 1 part, and -only- 1 part "fail". That was due entirely to my design (I'm still a n00b, I admit)
My first week of ownership has been great, and I have recevied several requests to make items for, gasp(!), for real, honest-to-god currency no less!
I didn't buy it specifically to make money, but to learn and make things I need. I am also learning, however, that I "can" make money with it if I put forth a little effort...
Items I've made during my first week:
SSD Docking Station case Dashboard to hold the speedometer/turn signals/ignition/GPS/Go Pro mount for my DR650 Fan Grills for my computer Liliput 7" LCD back cover that mounts it into my spare drive bays in my computer case (so I can run my monitoring software there while gaming on my main screen) Replacement door hinge kit for my Obsidian 800D Case Wall-mounts for my surround speakers Raspberry Pi case which also mounts a 4-port USB hub
I'm also currently in the design/prototype phase for a SFF HTPC Case.
Slashdot Mirror
Kleenex® is a trademarked word. You must edit your post to remove any and all mention of our trademark or we will black list you and you'll have to go back to fapping into an old sock.
Signed,
Saul Goodman
Now that IMAX has sent their IMAX Sized mea culpa don't you feel like an idiot? You should have known better, really.
on servers in the balkans and eastern Europe.
That's a REALLY bad car analogy.
It's more like:
Chevy makes a Z-28 Camaro with a 5.7L 525HP V8 engine and sell it as such, with all sales brochures and commercials stating it has a 5.7l 525HP V-8 engine.
They also make a Base model Camaro with a 5 liter V8 making 450HP.
Both models hit their estimated performance targets and all performance testing results show the Z-28 out-performs the base model by the pre-determined percentage. As it should.
Chevy dealers around the nation receive and start selling base models with window stickers stating the base model has a 5.7L 525HP V8 engine. They also receive sales brochures and marketing info stating the same thing.
They sell the cars for 5 months, and someone finally decides to dyno test the base model. They discover it's only putting out 450HP. (As it was designed to do)
Chevy figures out what happened and comes back with an ad in Motor Trend stating, "Oops! Bob forgot to update the specs with the marketing department. sry, LOL. It's operating as intended so suck a fat one and get off my jock, kthnx!"
That's essentially what happened here.
You pay for an airdrop containing the extra ROPS and Cache. It's contested, though, so you may or may not get it.
From 2 weeks ago:
"...the latest Phoronix end-of-year tests show the AMD Catalyst Linux driver is beating Catalyst on Windows for some OpenGL benchmarks. The proprietary driver tests were done with the new Catalyst "OMEGA" driver. Is AMD beginning to lead real Linux driver innovations or is OpenGL on Windows just struggling?"
(http://linux.slashdot.org/story/15/01/03/1426208/amd-catalyst-linux-driver-catching-up-to-and-beating-windows?sdsrc=rel)
We have Bankruptcy Protection.
Well there goes my chance to get lucky this year
It's "Yeticorns", you insensitive clod! You should know they invented gene-splicing thousands of years before anyone else.
1 - Accuse wrong person
2 - Wait for culprit to confess all over the internet and others to post identification of culprits
3 - Arrest (proof of guilt, optional, but not necessary)
4 - Profit!
See that?! They're so thorough they take the ??? outta step 3!
welcome our "open-access" loving vendors. If I have sensitive information I want to remain secure, I make sure it's stored on Sony's servers
Definitely. At that point you probably shouldn't call him "hacker". You should refer to him using his proper moniker, "Agent"
Their common ancestor flew into an elevator with Ray Rice.
Technically, the risk of flying a plane into a building in New York wasn't zero before 9/11 not because, "although it hadn't happened, it was possible", but because someone already flew a B-25 Mitchell bomber into the Empire State Building
Source:
http://en.wikipedia.org/wiki/B...
Need Another Shuttle Agency?
Citation Needed or GTFO
I'll tell you exactly why it crashed. It hit the ground before it was supposed to. When it does that, it's a crash. Don't need no fancy, schmancy NTSB to arrive at that conclusion.
I work at a large organization where we have several thousand computers, most with dual monitors and other peripherals.
It would be very beneficial if this technology allowed us to perform our yearly inventories by simply walking through each room carrying a tablet or laptop which recorded the devices present in each room.
We could then see, easily, if any equipment (like secondary monitors) were moved from room to room without permission.
Shut up, dude.
I'm getting ready to corner the market on goats and you're gonna blow my plans to hell!
I note that the Replicator 2 and Replicator 2X share many components.
Will there ever be plans to release an upgrade kit for the Replicator 2 which adds a more powerful Power Supply, Heated Build Plate, and/or a second Extruder Head Assembly?
It would be nice to be able to add those options to the Rep2 in order to print ABS and other materials, or to do multi-color prints.
Follow up Question relies on the proviso that an upgrade kit is planned....
Will you shut up and take my money already?!
I'm J.G. Wentworth and I don't approve this message. I'll take your structured settlement, anyday!
I didn't really think my submission was provocative but, based on the responses, it seems to have incited a lot of negativity for some reason...
I've had 1 part, and -only- 1 part "fail". That was due entirely to my design (I'm still a n00b, I admit)
My first week of ownership has been great, and I have recevied several requests to make items for, gasp(!), for real, honest-to-god currency no less!
I didn't buy it specifically to make money, but to learn and make things I need. I am also learning, however, that I "can" make money with it if I put forth a little effort...
Items I've made during my first week:
SSD Docking Station case
Dashboard to hold the speedometer/turn signals/ignition/GPS/Go Pro mount for my DR650
Fan Grills for my computer
Liliput 7" LCD back cover that mounts it into my spare drive bays in my computer case (so I can run my monitoring software there while gaming on my main screen)
Replacement door hinge kit for my Obsidian 800D Case
Wall-mounts for my surround speakers
Raspberry Pi case which also mounts a 4-port USB hub
I'm also currently in the design/prototype phase for a SFF HTPC Case.
Whaddarthey gonna do? Buy Adobe?
Oh Great...My retirement plan has been RUINED by you meddling kids.
when the story was broken on another site.
Our tumbly, 6-sided overlords must be please that we're finally catching up to the likes of Reddit