Slashdot Mirror
Intel: Metal in Future Chips = Less Leakage (updated)
securitas writes "Intel is contemplating using metal instead of silicon in future chips for the 'transistor gate, which controls whether a transistor is on or off' and the 'dielectric, an insulating layer below the gate,' which are respectively made of silicon atoms and silicon dioxide. 'Millions of minuscule switches that make up silicon chips leak electricity when they're supposed to be shut off. To compensate, engineers have increased the current, driving up power consumption, decreasing battery life for portable devices and generating more heat.' AMD has also experimented with metal instead of silicon. By moving to metal AMD and Intel expect to reduce electricity leakage. More from AP via SeattlePI and the Miami Herald." Update: 11/05 15:25 GMT by T : Read on below for some information from Intel on why this is a good thing.
gManZboy writes "Following up on the Intel news that about using metal in chips -- here's an explanation from Shekhar Borkar (Intel Research Fellow) about why heat, power, and sub-threshold leakage, not transistor size, are the real challenges to Moore's law. Apparently, in order to make chips much faster, we're going to have to pump more electricity in then anything else in our houses -- and they'll soon be as hot as a nuclear reactor -- no, really."
Man, and here I thought silicon felt weird.
In the AMD article the use of Nickel is mentioned.
You are thinking of the Copper traces instead of Aluminium, the transistors remained Silicon. Here they are talking about metal transistors.
to MetalValley!
:)
Now, instead of "experiment in silico", it would be "in metal" (??) or "in Fe|Au|Cu"
DNA in your Linux: DNALinux
...diamonds?
I thought that the manufacture of diamonds was set, and only needed to step up its production. Gemesis has been making, for less than $100, gems that would be worth hundreds of thousands if naturally mined.
The most promising thing about these diamonds is that, being cheap, they open the door for cpu cooling. Diamonds are tolerant of exponentially higher temperatures than silicon, so why aren't we hearing about intel, amd, motorola, ibm, TI, and sgi taking advantage of this new technology.
Metal? What about metal is unprecedented? What about it has kept us from using it before? Diamonds are the future, not metal.
The chemistry of the non-silica gate dielectric requires that the gate itself be non-silicon, and metals are better conductors anyway. (For larger transistors, we're already running into trouble from the distributed resistance of the gates.)
Hope that helps.
Lacking <sarcasm> tags,
I'm about 6 months away from my PhD in semiconductor physics.
They mean metal oxides. Leading candidates are Halfnia and Zirconia. These are "High-K dielectrics".
Using both reduces the Effective Oxide Thickness (EOT) of the gate dielectric. For the same thickness material, high-k dielectrics look like a thinner amount of silicon dioxide. Metal gates eliminate depletion effects in the gate (poly-depletion), which also makes the oxide look thinner.
With lower EOT, the gate has better control of the channel, so leakage goes down.
I dont see any mention of the type of metal that would be most suitable. I'm sure all metals are n't created equal.
Actually, two types of metal are probably needed. One for nmos transistors and another for pmos transistors. Nmos and pmos transistors have different threshold voltages (the voltage at which the device turns on), but ideally you would like both types of transistors to switch at the same voltage. The threshold voltage of a device can be shifted by modifying the "workfunction" of the gate metal. The workfunction is the energy required to remove an electron from the metal surface.
One reason polysilicon gates are used in conventional CMOS is that the workfunction of polysilicon can be modified by changing the level of doping and the type of dopant material (usually B, P or As). Thus, polysilicon gates can be used for both nmos and pmos transistors and by varying the doping, both types of devices can have the same threshold voltage.
Shifting the workfunctions of metals, using dopants is not so straightforward. As a result it will probably be necessary to use two different metals having different workfunctions for nmos and pmos transistors. Further complicating matters is the fact that the gate metal can interact with the dielectric material, modifying the effective workfunction and thus the threshold voltage. So, while the isolated metal may have the necessary workfunction, the workfunction may shift when the metal is part of a device. Thus, a lot of testing and experimentation is needed to find a metal that has the proper workfunction after it has been put into a device.