Intel Demos 7Gpbs Wireless Docking

← Back to Stories (view on slashdot.org)

Intel Demos 7Gpbs Wireless Docking

Posted by timothy on Friday September 14, 2012 @07:40PM from the gives-you-richer-more-vibrant-cancer dept.

Lucas123 writes "Intel for the first time demonstrated the Wireless Gigabit (WiGig) docking specification using an Ultrabook, which was able to achieve 7Gbps performance, ten times the fastest Wi-Fi networks based on the IEEE 802.11n standard. The WiGig medium access control (MAC) and physical (PHY) control specification operates in the unlicensed 60GHz frequency band, which has more spectrum available than the 2.4GHz and 5GHz bands used by existing Wi-Fi products. According to Ali Sadri, chairman of the WiGig Alliance, the specification also supports wireless implementations of HDMI and DisplayPort interfaces, as well as the High-Bandwidth Digital Content Protection (HDCP) scheme used to protect digital content transmitted over those interfaces. It scales to allow transmission of both compressed and uncompressed video."

39 of 52 comments (clear)

Min score:

Reason:

Sort:

7 Gpbs by rossdee · 2012-09-14 19:57 · Score: 1, Funny

WTF is a Gpbs ?
Giga Public Broadcasting Service ?
Global Positioning buzz saw?
1. Re:7 Gpbs by Anonymous Coward · 2012-09-14 20:53 · Score: 5, Funny
  
  Giga Porns Per Second. It's how we measure Internet bandwidth.
2. Re:7 Gpbs by Anonymous Coward · 2012-09-14 20:54 · Score: 1
  
  That means the psychic has a bouncer.
3. Re:7 Gpbs by Anne+Thwacks · 2012-09-14 21:29 · Score: 1
  
  Mod parent up!
  
  --
  Sent from my ASR33 using ASCII
HDCP... by runeghost · 2012-09-14 20:10 · Score: 4, Insightful

Making pirated media superior to purchased media since 1999!
1. Re:HDCP... by freman · 2012-09-14 21:33 · Score: 2
  
  yeh now imagine how much more awsome it'd be if it didn't have to waste time and power encrypting, signing and verifying that you can do what you paid to do (be it play games, or watch movies)
  All pirated content just works all the time, sure some times you get a dodgy release but for $0 down, it's still not a bad investment for a night in - I'm not a piracy advocate but on more than one occasion I just have. (Recent purchase of the STNG bluray that I can't watch for example... I should have just downloaded when it was online days before it was released)
2. Re:HDCP... by fa2k · 2012-09-14 22:24 · Score: 1
  
  You know, HDCP could actually have a use here if the display data are not otherwise encrypted. I don't know how well it would actually protect against eavesdroppers. At the very least it would remove any repeating patterns which eavesdroppers could use for statistical analysis.
  It would be silly if it wasn't encrypted, but there are often some flaws in new standards like this one. (I assume it's easier to eavesdrop on a 60 GHz signal than on actual wires, but there may not be that huge a difference.)
3. Re:HDCP... by adolf · 2012-09-15 11:39 · Score: 1
  
  There are two things stopping a man-in-the-middle attack: Range and bandwidth.
  
  --
  Kid-proof tablet..
Re:worried about health effects by Anonymous Coward · 2012-09-14 20:23 · Score: 4, Informative

That's because no reasonable person expects there to be any effects. Wifi signal power is ridiculously low compared to many other applications of electromagnetic waves. Your microwave oven is allowed to leak more power than your wifi router is allowed to emit.
Scales? by DarwinSurvivor · 2012-09-14 20:24 · Score: 1

Why in the world would bandwidth need to "scale"? It's either fast enough for the highest required bit-rate or it isn't, slowing it down for lower amounts of traffic is pointless.
1. Re:Scales? by sensationull · 2012-09-14 20:30 · Score: 1
  
  Powersaving
2. Re:Scales? by eugene2k · 2012-09-14 20:33 · Score: 2
  
  "it scales" refers to the specification, not the bandwidth.
  
  --
  Apple has "Mac vs PC", Microsoft has "Laptop Hunters", Linux has recession
3. Re:Scales? by DarwinSurvivor · 2012-09-15 13:06 · Score: 1
  
  Bullock. If you have 100MB to transfer, you are going to use MORE power transferring for 160 seconds at 5Mb/s than for 80 seconds at 10Mb/s
Some basic background by Areyoukiddingme · 2012-09-14 20:34 · Score: 5, Informative

For those wondering who are too lazy to Google, 60 GHz is right in the middle of the resonance range of the oxygen molecule (O2), so it's attenuated by nothing but air. That limits its range to just a few kilometers at reasonable (read, unlicensed) power levels.
Of more practical interest, 60 GHz won't go through anything more solid than cloth. In particular interior walls block it. So this a in-the-same-room technology, and without some very fancy processing of multi-path bounce signals, it's basically a line of sight technology. In other words, a 60 GHz transmitter attached to your tower under your desk is going to have a hard time driving a monitor sitting on top of your desk. That's why the article waxes lyrical about laptops, which are usually set on top of the desk. Sadly, we're likely to be stuck with video cable for many years to come.
Of course silicon is dirt cheap (sand cheap?) these days, so possibly chips can be designed that can do that processing. I don't know what the latencies might be like though. It might be intolerable for controlling a mouse. You'd have to ask a radio guy.
1. Re:Some basic background by Anonymous Coward · 2012-09-14 20:43 · Score: 1
  
  Put a little receiver/transmitter on top of the table and connect it with a cable to the computer. Or make it go around the edge of the table and connect using this technology in both directions. Yes, latency could be a problem, but I suspect that this link wouldn't have to add much latency compared to the latency that could be removed from optimizing other parts of the chain from input to screen output for lower latency.
2. Re:Some basic background by CrashandDie · 2012-09-14 21:48 · Score: 1
  
  Yes, solving a problem with wireless technology using wires is always an option.
3. Re:Some basic background by AK+Marc · 2012-09-14 22:15 · Score: 1
  
  People rarely use mice more than a few feet from the computer, unless you were thinking about putting your computer downstairs and having wireless up to the screen and mouse and keyboard.
  
  --
  Learn to love Alaska
4. Re:Some basic background by SilenceBE · 2012-09-14 22:15 · Score: 2
  
  If 30cm wire means that I don't need 5 meters of ethernet to stream a movie, that is a small price to pay. And it is not that uncommen. You have wifi sticks with a wired antenne you can place anywhere for better reception.
5. Re:Some basic background by AK+Marc · 2012-09-14 22:16 · Score: 3, Informative
  
  Wireless is always wired. Until power can be sent wirelessly as well, you'll need to at least plug it in to something.
  
  --
  Learn to love Alaska
6. Re:Some basic background by fa2k · 2012-09-14 22:34 · Score: 1
  
  Sadly, we're likely to be stuck with video cable for many years to come.
  I really see no benefit at all of wireless displays in desktops. There may be some aesthetic benefit in living room setups, but it's not that hard to hide wires. And the screen would need a power cable anyway. For mice and stuff like that, we've had wireless for ages
7. Re:Some basic background by Anonymous Coward · 2012-09-15 00:35 · Score: 1
  
  Say a projector setup in a meeting room. Wiring a 20+' heavy gauge VGA cable in say an existing meeting room isn't just plug and play (unless you're going half pass and running it on the floor or taped to a wall rather than in the wall and ceiling).
  That'd be a perfect setup for this (and yes, these rooms are used for more just power point slides)
8. Re:Some basic background by Areyoukiddingme · 2012-09-15 01:16 · Score: 1
  
  I wasn't referring to mouse movement data being transmitted at 60 GHz. I was referring to the cursor showing up on the screen over a wireless connection. Latency of the 60 GHz connection matters there. Exceed some minimum threshold and your cursor will appear to lag behind the mouse, an intolerable circumstance.
9. Re:Some basic background by Areyoukiddingme · 2012-09-15 01:34 · Score: 1
  
  I don't either, but this mania for portable devices and the proliferation of walled garden software distribution meaning vendors are pushing for more appliance-like behavior rather than desktop behavior means the specter of a display with no physical connectors at all becomes an actual possibility in the next decade. In truth, that's exactly the sort of thing Apple is even likely to do, purely in the interest of aesthetics (plus they care damn all about backwards compatibility and product lifespans).
  Have you seen the upcoming OLED TV products? Especially that ridiculous 55" one that's about as thick as an iPad. I could EASILY see Apple deciding they want to sell such a thing, and simultaneously deciding to get rid of a physical display connector in their ongoing pursuit of minimization. (<snark>And then patenting that.</snark>) If they could figure out how to power it wirelessly with resonant antennas, they'd eliminate every physical connector entirely. Nor do I see that quest as entirely bad, if, and I say IF, this WiGig thing actually pans out. Of course, if WiFi is any indication, putting 4 WiGig devices in the same room and attempting to run them as 2 pairs will be a disaster of interference and nonfunction, so we'll be glad for cables and connectors.
10. Re:Some basic background by the_other_chewey · 2012-09-15 04:37 · Score: 2
  
  "Until power can be sent wirelessly as well, you'll need to at least plug it in to something."
  It's called inductive charging, it exists.
  Is it inductive charging mats all the way down?
11. Re:Some basic background by jedidiah · 2012-09-15 04:59 · Score: 1
  
  Any commercial wiring installation should be a little more flexible and more robust than your average cut-rate tract home. Plus you have the likelihood that a corporation isn't quite as cheap as a consumer. That's why companies have wired interfaces already.
  Sometimes you just have to pony up.
  
  --
  A Pirate and a Puritan look the same on a balance sheet.
12. Re:Some basic background by mako1138 · 2012-09-15 07:26 · Score: 1
  
  I doubt 60 GHz multipath is much different from 2.4GHz multipath conceptually. If they can build a 60 GHz front-end (and they can) they can build whatever processing they need.
13. Re:Some basic background by AK+Marc · 2012-09-15 07:47 · Score: 1
  
  I wasn't referring to mouse movement data being transmitted at 60 GHz. I was referring to the cursor showing up on the screen over a wireless connection.
  I don't understand the distinction. You seem to be talking about transmission latency (including error correction), which is transmission latency, regardless of whether it's distance created, or horribly designed power savings.
  
  Wireless works fine for me for the crowded and interference-prone 2.4 GHz. If you've ever use wireless mice extensively, you'd have noticed that power savings on optical mice kills performance (delay, lag, etc.) any more than any wireless delay could.
  
  --
  Learn to love Alaska
14. Re:Some basic background by AK+Marc · 2012-09-15 07:49 · Score: 1
  
  That's just silly, the last one is sitting on a turtle.
  
  --
  Learn to love Alaska
15. Re:Some basic background by Areyoukiddingme · 2012-09-15 12:46 · Score: 1
  
  Wireless doesn't work fine for me in the crowded and interference-prone 2.4 GHz band. That was one of my points. My laptop, with its rather poor radio, can see as many as 14 different access points, and the number of timeouts and connection drops it experiences with my own access point in consequence is astronomical. Streaming video is completely out of the question and even Windows filesharing is intolerably bad. Simply receiving a directory list can take upwards of 30 seconds, with all of the timeouts and retries.
  I have used wireless mice extensively. I've been using this Logitech Cordless Desktop for 11 years now. It was the very first Logitech Cordless model that featured a USB connection for its transceiver, which is a brick so large as to be laughable by modern standards. It is a ball mouse. Not optical. That's how old it is. It power saves exceedingly well. And it both interferes with and experiences interference from any other cordless desktop in the same room with it, as my ex-gf and I found out to our sorrow. That's part of my same point as above. In any case, I'm not equipped to measure its own latency, though I'm sure it's significant.
  The point I was trying to make about the cursor is there is some measurable time between input occurring and graphics changing on the screen, even with a wired mouse and a wired connection to the screen. This delay has been growing progressively worse over the years, due in large part to the on-board processing that has been implemented in modern LCD panels. People who are equipped to measure it have come up with latencies that now run into double handfuls of milliseconds. My point was, adding wireless video can only make this problem worse. Potentially much worse, if my other point about interference is born out.
16. Re:Some basic background by AK+Marc · 2012-09-15 15:05 · Score: 1
  
  I've never had any such trouble. I've never heard of any widespread problem. I think that there are some problems some people see. I did some troubleshooting at a friend's house where a wireless printer would knock the whole block off their wireless networks. But this is the first time I've ever heard a person complain about latency from a wired mouse. I think you talk to too many professional FPS gamers. My current wireless mouse appears to me to have zero latency. And I've never had a mouse with any latency, other than one optical wireless with obscene power savings that would have horrible lag between movement and response, but wasn't bad, so long as you were constantly moving it.
  
  --
  Learn to love Alaska
17. Re:Some basic background by foniksonik · 2012-09-16 07:25 · Score: 1
  
  Epson makes great wifi projectors. My office has ~20 rooms set up this way and it's awesome. No cables, no adaptors. Just works.
  I think they use a custom VNC setup to mirror the display from the laptop.
  
  --
  A fool throws a stone into a well and a thousand sages can not remove it.
Re:Intel, wifi = disaster by Anonymous Coward · 2012-09-14 20:44 · Score: 1

How come it works just fine in Windows?
Sounds like a Linux problem to me.
Re:Intel, wifi = disaster by Datamonstar · 2012-09-14 21:04 · Score: 1

Maybe you just don't know any better?

--
The eternal struggle of good vs. evil begins within one's self.
Re:Intel, wifi = disaster by dreamchaser · 2012-09-15 02:41 · Score: 3, Informative

Maybe you just don't know any better?
I know better, and the AC you responded to is correct. 802.11n works just fine with Windows XP and 7. I would love it to work well with Linux too as I use several Linux machines including a laptop that would benefit from the higher bandwidth. They just haven't quite gotten the bugs out of the system yet.
It works great with OS X machines too. Are you still going to imply it isn't a Linux problem?
Re:Intel, wifi = disaster by Khyber · 2012-09-15 04:00 · Score: 1

" 802.11n works just fine with Windows XP and 7"
Which explains why all of my 802.11n devices have to be set to 802.11g, in order to even connect to the wireless-N router, under both XP and 7.....

--
Still waiting on Serviscope_minor to wake up to fucking reality and realize that Jessica Price isn't going to fuck him.
Re:Intel, wifi = disaster by jedidiah · 2012-09-15 04:56 · Score: 1

Wireless is a clusterf*ck in general. It's something that sounds like a cool idea but has a lot of technical hurdles. Its kind of fine if you have no other choice but sucks when compared to the alternatives.

--
A Pirate and a Puritan look the same on a balance sheet.
Re:ooo - 7Gbps by jedidiah · 2012-09-15 05:01 · Score: 1

...so it still makes much more sense to have a "home cloud" rather than depending on some stranger's server that sits some place on the other side of that network bottleneck.
That doesn't make 10x or 100x transfer rates any less useful.

--
A Pirate and a Puritan look the same on a balance sheet.
Re:Intel, wifi = disaster by dreamchaser · 2012-09-15 07:31 · Score: 1

" 802.11n works just fine with Windows XP and 7"
Which explains why all of my 802.11n devices have to be set to 802.11g, in order to even connect to the wireless-N router, under both XP and 7.....
That sounds like a personal problem, and I'll counter your anecdotal evidence with the fact that my own 802.11n works just fine with my Windows machines at home as well as my Macs. My linux boxes are wired except for the laptop and that's a bit older so only supports G. I have no first hand experience with Linux not working with N but this thread is not the first time I've heard such complaints.
Re:Intel, wifi = disaster by chantal+elie · 2012-09-17 00:50 · Score: 1

www.modashop.fr