Slashdot Mirror
Ask Slashdot: Where Can You Get a Good 3-Button Mouse Today?
guises writes Ever since mouse wheels were introduced the middle mouse button has been sidelined to an inadequate click-wheel function, or in some cases ditched altogether. This has never sat well with me, a proper middle button is invaluable for pasting, games, and navigation. More than that, my hand categorically rejects two button mice — the dangling ring finger causes me genuine physical discomfort. I have begged Logitech on multiple occasions to make just one, among their many screwy specialty mice, to replace the Mouseman which I loved so dearly. I thought for a moment that I had been answered with the g600, only to find that they had put the right mouse button in the middle.
So my question to Slashdot is: where does a person turn for a three button mouse these days? I've only found two, both ergonomic and priced accordingly. I use the Contour and like the shape and wheel position, but would love to find something wireless and with a higher DPI sensor.
So my question to Slashdot is: where does a person turn for a three button mouse these days? I've only found two, both ergonomic and priced accordingly. I use the Contour and like the shape and wheel position, but would love to find something wireless and with a higher DPI sensor.
Thrift store, junk shop, pawn shop... etc
Just glue three Apple Mice together.
$69 for a mouse, especially a specialty one like you're wanting, is not that much. The only alternative is going to be buying a good used one from eBay.
Can't recommend enough the Performance Mouse MX enough.
While it does have the middle button integrated into the scroll wheel, once used to it you will find it completely intuitive. I middle click hundreds of times a day and only found it difficult during the first two weeks of owning the mouse. 5 years later I still prefer the Performance MX over anything else.
To middle click I typically shift my index finger over a centimeter or two. My hands are slightly above average size and ergonomically the PerfMX is perfect for me.
The g600 certainly looks programmable - is there no option to reassign the primary buttons? Hell, it seems like even the buttons on my normal Logitech office mouse can be reassigned, certainly the click-wheel can be. (on Linux at the moment, so I can't double check)
--- Most topics have many sides worth arguing, allow me to take one opposite you.
That sounds like something pretty basic that either Logitech or Microsoft would provide.
Not sure why a scroll wheel will not work for you, but check out the Logitech Couch Mouse M515. The wheel is not a middle, the button below the wheel is the third mouse button.
Just a Tuna in the Sea of Life
xmodmap -e "pointer = 1 3 2"
Can you share details on what the problems are with the clickable middle wheel? You mentioned it's "inadequate", but what makes it so? Just wondering because I use the middle-button/wheel all the time and it seems to work as well as the other buttons - no discomfort, no extra thought, etc.
I miss thr 3rd button too, and my middle finger aches from using the crappy Dell's mouse wheel at work. But at home I have been using a Microsoft sidewinder X5, which has a flat mouse wheel instead of the rounded one as in most other mouses. One can be disgusted from the most other things Microsoft has done, but they really can do mouse hardware. The mouse customization application is mostly a piece of crap, as on every launch it requests a installation media from Q drive, which my machine never has had, and I installed it from a executable from microsoft.com, but anyway, one can still assign the grenade and knife to the two side buttons. And of course, on Debian it works flawlessly.
When it comes to a 3 or more button mouse, I find I like to keep my thumb busy and that seems to work pretty well. Want to test control ergonomics ask gamers.
Chaos - everything, everywhere, everywhen
Hey STUPID, have you tried eBay?
The Logitech Anywhere Mouse MX is a wireless mouse, so may not suit. It does nonetheless have a middle button distinct from the scroll wheel, and is not a weird 'ergonomic' shape.
I use it with the laptop, but at work I'm on the sadly long-discontinued Logitech Marble Mouse, with middle-button emulation. (I see that there is now the Trackman Marble, so perhaps I will still have somewhere to go if my venerable trackball ever dies!)
http://www8.hp.com/us/en/products/oas/product-detail.html?oid=403895
I think the general case for right handed people is that the pointer finger is used for left click, ring finger is used for right click. I imagine this is now due to the mice having two large buttons and a scroll wheel instead of three large buttons. Try using only two fingers on the mouse instead of three, then your ring finger will not dangle, unlike other appendages.
Check out some of the ergonomic mice. Not inexpensive, but demanding minority products seldom are.
Personally, I like the Evoluent vertical mouse. Reduces pronation (twist) and available LH as well as right.
If you are okay with changing to a trackball, CST2545-5W has fairly good ergonomics and three buttons (Plus ports for 2 more).
The middle mouse button is certainly useful, but I find the scroll wheel being a button is sufficient for me. I don't like Apple's multitouch mouse at all. Real buttons for me, thanks.
But I guess paradigms are changing. In Linux, as we move forward to Wayland, policies regarding the middle click are pushed into the toolkits. I hope they see fit to allow the enabling of select and middle-click paste. I can understand that not all users want it (some actually like the middle-click to start a page scroll), but for those that do, it's so fast and handy.
I've been told the game has changed. Can't you just 3D print a new mouse?
Mice are so mass-market these days that it is hard to find one that actually performs properly. I've gone through a lot of mice over the years, always preferring the hardwired mice over the wireless (dead battery == unhappy), but in the last round I simply couldn't find a wired mouse that worked well. Everything being sold was wireless.
Of late, many of the mice I've tried have simply been too big and bulky, stretching my fingers and generally uncomfortable.
I wound up going with a Microsoft Sculpt 1569 wireless mouse (w/ Nano Transceiver). The Logitech M325 wireless also works but its middle-button-scroll wheel isn't ratcheted. These small mice are nice, my thumb and two right fingers hang over the edge and stay relaxed.
Also I recommend buying a non-rechargable alkaline AA for it, which will last 6 months. The rechargable NiMH batteries usually only last 1-2 months before they have to be replaced/recharged due to nominal leakage, which is too annoying (though I suppose one could buy low-leakage NiMHs).
The middle button scroll wheel isn't a problem. Most of them can also be clicked left and right which IS a problem because it's trivial to accidently click left or click right when you are just trying to push down on it as a middle button. So I disable the mouse-wheel left/right action entirely via:
xinput set-button-map Mouse1 1 2 3 4 5 6 7 0 0 10 11
For the transceiver I find that (obviously) the closer it is to the mouse the better. The best solution is to buy a keyboard that has a USB extension on its right or left side and plug the transceiver into that. Then the transceiver is right next to the mouse with no extra cabling. The Razer (mechanical) gaming keyboards are my favorite... very heavy so they don't move around and have the same feel as the old IBM mechnical keyboards had. 80 WPM is a breeze on them.
-Matt
Vertical mouse best mouse. Yeah it takes a week or so to really get used to the new hand position and buttons but after the learning period it's everything a regular mouse is but without the wrist/forearm pain I used to have after long gaming sessions.
Seven puppies were harmed during the making of this post.
I have one of these - ostensibly a gaming mouse, I use it as my only mouse. You can't go wrong. Give it a go.
Requiem for the American Dream
Get a used mouseman from ebay ($10 and free shipping), throw away the top cover, and 3-d print your own.
Don't own a 3-d printer? Probably one of your friends does, or the local university, or the local hackerspace, or as a last resort you can use shapeways.
Grab some modeling clay in your hand, make a 3-d scan of the resulting "handle", add fasteners for the buttons and ball (or IR chip), then 3-d print a custom-grip top cover. You can get IR mouse elements and ball elements from old mice, usually for free on Craigslist. Or the local Salvation Army store.
Purchase a sheet of friendly plastic (polycaprolactone), soften it in a pan of boiling water, then lay it over your relaxed open hand like a handkerchief. Wait for it to cool and harden, take a dremel to it, and use that as a custom-molded mouse top.
Get an Arduino, or any of the zillions of hobbyist microcontroller systems (pic, propeller, &c) which have a USB interface, and add buttons and an IR chip from an existing older mouse and program the buttons specifically for your needs.
Get a used mouse with lots of buttons, remount the buttons into a custom top as mentioned, then reprogram the button codes in the driver.
Or write your own USB driver at the OS level - it's not that hard. (For windows, it involves downloading the DDK and modifying an example found on the net.)
I too suffered from dangling digit syndrome, until I got a mouse with thumb and "pinky" buttons. Now I use the index and middle finger for the mouse buttons and the others for the buttons around the sides of the mouse. Just Google "gaming mouse"
Aside: It would be cool if we could get some mouse vendor to sport 3D printed covers, so we could design our own custom "ergonomic" fits, custom button placements would be nifty too. Some kind of click-wrap that said any designs built atop their framework could be put into production might incentivize crowd sourced (re)engineering of better mice. Something like the Statial mouse, but with more button customizations.
your mom
next you will want a FOUR button mouse .
http://www.amazon.com/IBM-3-BUTTON-OPTICAL-MOUSE-BLACK/dp/B00J2CAGPG/ref=sr_1_6?ie=UTF8&qid=1422138178&sr=8-6&keywords=3+button+mouse
Not the submitter, but it doesn't work very well for me. In fact, it often causes spurious clicks trying to middle click and accidentally scrolling. Just like how the touchpad never ceases to cause spurious inputs that interfere with focus-follows-pointer. Too bad far too few laptops come with a trackpoint these days. More or less the only mouse without a scroll-wheel I've found is the hp DY651, msrp $12 but somehow here in europe that ends up being EUR21, and not available locally so I haven't had chance to try it.
Though I'm not sure it's still feasible to goof off on goofy websites without a scrollwheel because "helpful" webmonkeys auto-load more stuff when scrolling to the bottom, which fucks up the slider's position. So if you're holding the slider to shoot through the page, the page starts to jump around and you lose your place, overlook stuff, and all that. "Don't do that then" is the obvious retort, but the incorrect one. For really, that's inconsiderate webmonkeying and so needs to be fixed by hitting those damn webmonkeys with a stick until they figure out how to not be inconsiderate.
Bluetooth, comfortable mouse with a wheel, but a split 3rd button. Instead of a 3rd button integrated with the will, it's a smaller button closer to the palm.
Onda Technology Institute
The erosion of middle-button paste functionality is a continual frustration.
There are cultural differences between the Windows and Macintosh personal computing worlds, and that of X11 on Unix workstations. While always allowing customisability, we should hold on to the good ideas of the past, rather than dismiss them as being unfamiliar to the personal computer user.
What irks me especially is that the same forces that are driving us towards a Windows-like experience on the Linux desktop are also removing the ability to easily customise our environment, if only to retain the functionality that is being deprecated or dismissed. (I'm looking at you, GNOME.)
You can - I've done that exact thing.
It doesn't work without driver software, though, so you might have a problem with any OS that isn't Windows...
"I'm not anti-anything, I'm anti-everything, it fits better." - Sole
A lot of people are suggesting that the G600 might be reprogrammable, but they all note that they don't have the mouse, so they don't know for sure.
I do.
I just checked it, and you can reprogram the primary mouse buttons to anything you want. You can also set that as the mouse's built-in configuration, so you don't need to use the drivers and the settings will be persistent across computers. Have fun.
If you can't convince them, convict them.
Dont know about anyone else but I have not looked back since discovering track balls. Seem to be a lot more precise to maneuver than a mouse and there is always a plethora of buttons. My current trackball is billiard ball size with buttons on four sides. I forget the vendor... Use it for Autocad, Photoshop etc. One huge difference -- it just sits there so no real estate needed to swing it around. With a cluttered desk... bonus.
Because he's more interested in whining about his first world problem.
Logitech G400s is the chosen one ....
The six button gaming mice encourage you to retrain your hand position. Mouse wheels are big and made to be clicked easily without disturbing the scroll wheel. You should just learn to adapt to this new stuff imo.
Clickety Click
Here you go - http://www.amazon.com/Sun-Microsystems-MOUSE-Crossbow-370-3631-02/dp/B00B86XP0C/ref=sr_1_10?ie=UTF8&qid=1422139384&sr=8-10&keywords=sun+mouse
They have an excellent selection of 3-button mice at Circuit City. What, don't you have a time machine?
---
DRM is like antifreeze, to the MPAA/RIAA it's sweet, to the consumers it's poison.
I've been disappointed with most of the click-wheel mice I've used. I guess it's hard to balance the stiffness of the wheel and the button - either the button is too easy to click by mistake when scrolling, or too stiff so it's hard to click without moving the scroll wheel. I've had problems with brands like Microsoft and Logitech.
My favourite mouse currently is a Razer Taipan. I got it for gaming, but I love it for general desktop use. It's got the best button feel of any mouse I've used, including the scroll-wheel button. It's not cheap, but I don't mind spending a few bucks on a tool I use all the time.
As a left-handed mouser, I would like to tell you that I don't give a damn about your problem.
Try finding a left-handed mouse (preferably wireless) that isn't total garbage.
Ive been using a contour perfit mouse now for some 8 or so years and love the ergonomics, its genuinely saved me from the RSI monster that was giving me problems. But as you say, the optical tracking is just about as bad as it gets; it often skips over 2-3 pixels randomly and the low dpi means you cant speed it up to any useful degree on high DPI screens. This sucks majorly for doing photoshop and 3D stuff and making gaming a less than great experience. I mailed them 2-3 years back asking if they had any plans to upgrade the tracking and just got a generic canned response that they will look into it.
I had a Logitech Thumbball USB for years,
I LOVED IT.
But when I needed one, not being made !
Only option is the wireless one. (non rechargeable!)
Found out it works poorly.
After it failed during critical moments during work, gaming, & online gambling.
Stopped using it,
Now I am using a Logitech trackball (and I bought two to have a backup)
NOT the same !
uncomfortable !
buttons are in the wrong places.
and the third button and scrolling modes are funky bad.
if you are going to manufacture a wireless one OFFER A WIRED ONE !
the classics never go away !
ps. anyone know where you can buy a new one ! post ! (i know about ebay, troll)
Normally $49.99, so it's a deal.
http://www.amazon.com/gp/product/B00BIFNTMC/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
I have one, and it's great.
the lenovo scrollpoint mouse (http://support.lenovo.com/at/de/documents/migr-43954) has a fairly well accessible third button. IIRC it was quite popular in the Plan9 community a few years ago (their tools heavily depend on a third button)
Fourth result from a Google search on "three button mouse"-- HP DY651A
http://www8.hp.com/us/en/products/oas/product-detail.html?oid=403895
$12.00
Buy more than one, please.
If want real geek points make one. Take a conventional wireless wheel mouse, remove the wheel, and print a new 3D case what has the shape and button layout you want.
Bonus points, put a howto up on Hackaday.
USB 3-button optical mouse for $12. Problem solved.
I bought a logitech mx dark field mouse because i've got a glass-topped desk.
But it turns out it's got a little button in the middle behind the wheel; that's the third button.
"Reality is that which, when you stop believing in it, doesn't go away." - Philip K. Dick
Why wouldn't xmodmap work for the OP? It's not portable but, if you're the type that carries their personal mouse around with them, the configuration commands could easily be stashed on a USB drive and loaded onto any (UNIX/Linux) computer you're going to attach your mouse to.
CUR ALLOC 20195.....5804M
Old old old old.
Amazing mouse with a ring finger click. Given, its got like 17 other buttons, but you will thoroughly enjoy it.
I'm old, but why would anyone want a old 3-button style mouse when any gamer mouse will come with at least four buttons? Something like the Mad Catz MMO 7 has 15 buttons!
Are you fucking serious? Shittily disguised advertisements are Slashdot content now?
>Posted by timothy
Oh, right.
Because the mouse in it's default hardware profile (without the driver) mostly plays a USB keyboard and sends keystrokes for the other buttons; and without the driver's software profile support you can't even freely map the middle mouse button to where the right mouse button is by default...
"I'm not anti-anything, I'm anti-everything, it fits better." - Sole
My current mouse (Razer Imperator) had an encounter with a dremel tool and some epoxy additions, and now it's exactly the shape that my hand wants to hold. Recently I covered it with a thin layer of leather. If it breaks, I'll do the same thing with my next mouse. If you want to do something like this, I suggest the following steps: First, grind away the bits of plastic that feel like they're in your way. If you're worried that you'll damage the electronic guts, take apart your mouse first. Next, cover your mouse with playdough and grip it exactly as you would want to. Then scrape away all the playdough that isn't supporting your fingers. Then, when the mouse + playdough feel perfect, scrape away about 2mm more, cover it with a few layers of a mixture of paper pulp and glue. When that dries, take off all the additions, scrape out the playdough (saves weight) and epoxy the paper in place. The leather cover is optional, but I really find it awesome. It makes it feel like a luxury item.
The Logitech Anywhere MX has a physical middle-click button underneath the scroll wheel ("clicking" the wheel itself just toggles a friction gear on the scroll wheel). If it weren't for your additional complaint about needing a massive mouse (this thing is tiny), it would be perfect for you.
Interestingly, while it really can run perfectly on surfaces as weird as glass, I have found one surface it does not work on: my old mousepad.
I still have a hand-me-down from Doug Englebart. Now, get of my lawn.
http://lmgtfy.com/?q=3+button+optical+mouse&l=1
If you'd like, we can give you some advice on how to wipe your ass, too.
That button on Logitech mice is to adjust the sensitivity of the scroll wheel (clicky / free-spinning). The scroll wheel itself is still the third mouse button.
I don't have an answer, but I'm reading this with keen interest as I feel similarly about input devices. I recently wrote up some of my ongoing keyboard rants where scrollwheels are also discussed. One general issue seems to be that those who don't learn to use keyboards properly, will reinvent similar functionality in mice (arrow keys and pgup/pgdn -> scrollwheels).
Escher was the first MC and Giger invented the HR department.
I'm using a logitech wireless ergonomic with a scroll/button combo that I like (and it has two additional buttons for the thumb). And I used that vertical one you linked to for a while when I had pretty severe nerve problems.
Why don't you design one and get your project funded on kickstarter? You would get the exact mouse you want, plus money.
lucm, indeed.
Link 3 on the Google search for "3 button mouse without scroll wheel"
http://www.amazon.com/HP-Optic...
Plus the 2 new models you found there does not really seem to be a real shortage of your niche product.
I am a HUGE believer in the G600. You see all those 12 buttons on the side? You see the two buttons at the top? You can configure them however you want, and you'll never need to do the clicky-wheel.
So, what's the problem? I really don't see it. Oh, there's a button on the far right that your pinky or ring finger can get to.
You DO realize you can map the G600 buttons... right?
Make one! Design the mouse to sit nicely in your palm, perhaps by finding one that you like already, redesign it to have 3 buttons, then hit print. As far as internals, find another mouse and remove the switches, wire new buttons to each of the inputs (using the scroll wheel click input for the middle button) and tada, you have a 3 click button mouse.
I would offer to help, but my 3d printer hasn't gotten here yet.
Make sure the configuration is stored in the mouse itself. Most mice do it in the driver and that does not work with other OSes. For example, the Sharkoon Fireglider and Darkglider mice store config in the mouse and hence work the same under Windows, Linux, etc. I have put the middle button on the thumb button permanently this way.
Most ACs are not even worth the keystrokes to insult them. Be generically insulted by this and ignored otherwise.
You save to the on-board memory it's a basic function, and everything works the same in linux etc. http://support.logitech.com/en... if ya need instructions. Works fine for me when I multi boot.
No sir I dont like it.
I guess I didn't emphasize this.
1)- Map your left button (button 1) to left button.
2)- Map the button to the right of that (button 2) to middle button [normally this is right button]
3)- Map the far right button (the "g-shift" button normally, but it can do ANYTHING AT ALL including typing letters) to right button.
Problem solved. With nothing but the mouse and the software that comes with it. Which you can run yourself, go to a friends house and run it there, get a VM and run it there, run it on a laptop, or hack it up somehow, because the G600 has internal memory. But it's super easy and user friendly. And then you just ignore the mouse wheel or wheel it with your "button 2" finger.
Part number 063-0009-001 from SGI. Mine has been in constant use for at least 14 years, and still works fine. It also has a good curve to it to fit your palm:
http://www.recycledgoods.com/s...
or
http://www.sgisun.com/sgi_octa...
or
http://www.mashek.com/SGIparts...
You sir are to old to still use a computer. That is all.
http://www.ebay.com/itm/Vintage-1980s-MOUSE-SYSTEMS-Three-Button-PC-MOUSE-M4-Model-/191489120310?pt=LH_DefaultDomain_0&hash=item2c95a41836
The original variant of the optical IBM/Lenovo scrollpoints are really nice and have a separate third button above the XY scroll saddle. Bonus points for having a two axis scroller that is hard to slip off when pressing left or right and being symmetric for ambidextrous use. The later models fail by putting the third button on the side.
I am becoming gerund, destroyer of verbs.
A friend of mine runs a training center for the disabled, and many of those physically challenged people do not have the agility to use computer mice effectively
On the other hand, trackballs, especially the trackballs with 'big size ball' seem to work with most of them
My friend's training center used to stock many of those trackballs with 'big size balls' but unfortunately most of his trackballs have worn out
And that nobody these days seems to make trackballs anymore
So, may I peruse this thread to ask where can one buy good trackballs, perferably those with 'bit size balls' ?
If you know of any source, please share, as this would greatly help many of the disabled people encumbered with physical difficulties
I thank all of you in advance !
what kind of idiot is this guy, the closest thing he's going to get is one of those shitty mice that uses a touch strip instead of a wheel, and thats a maybe
Not sure if this is true, but someone claimed recently that highlight to copy, middle-click to paste was a bug in X originally, but it was found useful so kept. Also, as it currently stands it is a highly useful, but very insecure mode of operation. In effect anything you highlight is immediately visible to other apps running. In today's world this starts to become a security concern, especially if you run something that's not fully vetted and trusted (that's what non-root is for, after all!). Not sure quite how this dilemma will be solved.
First, not all mice are same. If you have a problem with clicking the wheel mouse on your current mouse, then get a new brand of mouse.
Next, go to Reddit and post these stupid questions in the /r/pcmasterrace because they are better suited to your stupid fucking questions.
Be seeing you...
Middle mouse works to paste in terminals, like Xterm, where ctrl+v does not work. Additionally, it's very efficient. In a terminal I can double click a string and paste the string much more efficiently than using a keyboard. Yeah, I know.. if you are using Windows you really don't worry too much about efficiency either.
-The wise argue that there are few absolutes, the fool argues that there are no probabilities.
I have to middle-click all day, the stock DELL mouse with raised scroll wheel/middle button does just fine. And you may be able to get a free one from a sys admin somewhere.
There was an unknown error in the submission.
http://www8.hp.com/us/en/produ...
That was easy.
I should use this sig to advertise my book ISBN-13 : 978-1501515132.
Ask Slashdot where to get a 3 button mouse? Are you living under a rock? How about a stupid question tag with an annual award for the dumbest submitted.
You basically already found the mouse you want. That g60 thing or whatever that had the three buttons on top. Your problem was that they're mapped incorrectly for your tastes.
Okay. Use autohotkey to remap the keys. Problem solved.
Someone beer me.
I've decided to stop wasting my time responding to AC trolls/sockpuppets... so if you want a response from me... login.
If your beef with mice is phisical discomfort clicking mice - get a roccat mouse. It has utility to rebind buttons. Use side buttons, rebind them as middle button, and your physical discomfort is gone.
The Func Func MS-3 is the answer to the dangling pinky issue. I've been using one since September, and the horrible pain I used to get with mouse-using is gone. The mouse could be a little taller, as it is shorter than a Kensington Pro-Fit Fullsize mouse (an excellent cheap mouse for large-handed people -- but has dangling pinky issue too) -- but its width is excellent, being a perfect fit for my large hands, and seamlessly supporting my pinky finger. It's definitely an all-around kickass mouse, and when combined with an Imak Smartglove, it has alleviated all of my mouse-based pains.
The company "CST" makes trackballs with balls the size and weight of pool balls. Very well built, some also support external switches (like foot switches) for buttons 4 and 5.
might suit your needs if, can probably disable scrolling if you need
Stupid name, but I have been using the mouse for a couple of years and like it a lot. I find that my hand rests more comfortably on this mouse than any other I've used.
In trying to decide which mouse to get, I relaxed my hands and kind of hung them in the air over my desk, without twisting them in anticipation of a mouse. Tried to imagine being weightless. That position was probably 80 degrees off from what I would have to do to use an 'ordinary' mouse. So I thought, 'Hey, if the mouse is oriented the same as my hand would be in a relaxed state, maybe they're onto something'.
Anyway, it has several buttons, though I only use the three large ones. And the scrollwheel.
This and a Wacom tablet and you are all set. Bit pricy though when you add the needed Wacom tablet. https://store.wacom.com/us/en/... OR you could just get one of these which took about 2 min to find with the Google http://www.chairslimited.com/p... http://evoluent.com/ Or for a whole page full of them http://www.aliexpress.com/popu...
OMG Ponies!!! with Glitter!!!! I miss Pink
But I was unclear on exactly what exactly is this 3 button mouse of which you write? The mice that live in the computer room near the keypunch do not have apparent buttons. Are you putting little cardigans or jackets on the mice in your facility? Is this some form of bioengineering?
I recall reading recently of a thing that Englebart put together a few years ago, but it had one push button in the corner, not 3.
I am quite the fan of logitech mice, most mice have a wheel well that rests on the button. It seems to me that with a little 3d modeling you should be able to make a button that fits your finger better that replaces the wheel altogether. It could basically be a rod that rests in the wheel well and provides a button up top.
The ring finger sits on the G button on the mouse. Which i believe is programmable to the any button you like including the right mouse button. It is quite comfortable for my large hands.
One of the latest trends I have seen is to make the middle mouse button a touch surface.
As I also love the middle mouse button but hate the wheel I have found these to be excellent. I have three of them (all Microsoft mice if you want to hold that against me) and the middle button is just as easy to press as either of the side ones.
Well two anyway. Do a bit of research first. The Surface Arc for instance looks like it has a middle button but it doesn't. It requires a double touch on the middle section to simulate a middle click which is really annoying.
The one I use at home is similar but not exactly this model: Sculpt Touch Mouse
I've heard of Winmodems. Today I learned about the Winmouse. Ugh.
CUR ALLOC 20195.....5804M
The Logitech G600 is pretty decent if you can get used to the larger size and all the buttons on the side. Stupidly, it forbids you from programming the middle button to middle click and right button to right click. You can program the middle button to right click and right button to middle click, though, and then swap the two with xmodmap if you're using linux. You might also want to program the resolution down much lower than the default for linux use. Of course, since it's from Logitech, you'll need Windows or MacOS to program it.
There is a reason why they don't make that garbage anymore. My mouse has 7 buttons, one of them being the scroll wheel, and scrolling with the scroll wheel is the most function outside of games. The time it takes to move to the scroll bar is ludicrous when you're navigating windows all day, and you mention games, it's ideal for selecting weapons in FPS etc. Not having it is seriously gimping yourself.
I've similar needs, I despise the middle button click by wheel. So this is what I'm using: Creative Fatal1ty Laser Gaming. 3 Buttons on top, a separate mouse where, and a side button. Unfortunately it's wire usb.
Then use X-Mouse Button Control to remap the buttons to what you want.
You can still find the mouse on ebay.
"Open link in new tab" in most web browsers
Panning the view in many graphics editors (don't even talk to me about tilt-wheels - I want to be able to scroll in whatever arbitrary direction is appropriate to whatever I'm doing at the moment)
Lots of different stuff in 3D modeling software.
Lots of advanced functionality in multi-clickable interfaces where, generally speaking, left-click=most common action, right-click = context menu, and middle click is usually a moderately common alternate action, often user-configurable. For just normal Window GUI stuff it's not uncommon to middle click the title bar and widgets to roll-up to window shade view, send to back or make always on top, minimize to the tray, or various other options. It often takes a 3rd-party extension, but power users have the option to do such things on all the major OSes
--- Most topics have many sides worth arguing, allow me to take one opposite you.
Can;t you reconfigure the logitech g600 you mentioned to have a third button in the middle and a right button on the right?
I switched to the Kensington Expert Mouse trackball when it first came out many years ago. All versions have four buttons. The newer versions have added a scroll ring around the trackball. As a result, I have been able to avoid RSIs. The added benefit is that users of these trackballs have enhanced functionality in day-to-day operations, from programming, to browsing, to graphics work, and gaming.
Since you mentioned physical discomfort with a dangling ring finger I must stress that you try out the Kensington Expert Mouse (can be bought new as cheap as $60). The ring finger rests on the right button or the upper-right button depending on your preference.
Kriston
"my hand categorically rejects two button mice — the dangling ring finger causes me genuine physical discomfort"
guess what mine rejects categorically?
Many thanks for your suggestion on the CST trackball, but for some reason I can't find a working link to the company
If you have a working link mind share it with us, please?
Thanks again !
" I thought for a moment that I had been answered with the g600, only to find that they had put the right mouse button in the middle."
the middle button is not a right mouse button, its button. You can assign right click left click to whatever button you want, that would be the point of the g600 and software...
can confirm, got mine yesterday
I am an extremely happy Evoluent customer. The mouse is absolutely terrific, very comfortable and actually _more_ intuitive than a flat mouse once you get used to it. With the exception of my graphics designer, every single person in the office fell in love with my vertical mouse when I let them try it for a few days.
However, nobody is willing to pay $100 for the mouse, just like they are not willing to pay $70 for a mechanical keyboard. I think that people see cheap mice and keyboards for $10, so they feel cheated when they spend much more than that on peripheral equipment. The truth is that I'm a sucker as well. Even though I have an Evoluent at work I still use a flat mouse at home as the price of a second Evoluent is hard to justify to myself when I hardly use the mouse at all (Vimperator, Linux).
Damn the price, trust me, you want that mouse though. The discrete middle-mouse button is only the icing on the cake. Almost _everything_ on that mouse is absolutely terrific.
It is dangerous to be right when the government is wrong.
It has a small button below the wheel that you can program as the middle button. It's a decent mouse. I'm a happy with it. http://www.logitech.com/en-us/...
The Logitech M500 has just a couple of side buttons, making them easier to reliably select with your thumb. These can be assigned to any of a large number of functions. I use mine for "double-click", which works nicely in both shell and GUI to reduce finger fatigue. $30 list. Wheel shifts between fast-as-hell smooth roll and traditional clunky roll actions. It can act as a middle mouse button. Corded, so batteries are not an issue. "http://www.logitech.com/en-us/product/corded-mouse-m500"
Windows and Linux both interpret pressing both mouse buttons as pressing the middle mouse button.
Buck Feta. You know what to do.
Go away.
The Logitech G600 is wonderful. You just need third-party software to remap the buttons.
On Windows, I recommend "X-Mouse Button Control": http://www.highrez.co.uk/downl...
On OSX, I recommend either SteerMouse or "USB Overdrive"
A few years ago I broke my right hand and with the cast I could not twist my hand and arm so that I could have used a conventional mouse. So I got an Evoluent vertical mouse. I've stuck with it since because I no longer have a mouse hand and the mouse does have a fully funcctional correctly placed middle button. It also has a scroll wheel but most importantly, it also is in the right place.
Logitech isreally good at making wonky speciality mice that are almost perfect but then there is something that completely puts you off and they refuse to do anything about it. It's works, we won't fix it.
Get a five or even six button mouse.
I do not want to miss button four and five for going back and forward in browsing. Most mice are very programmable and you can use the buttons for whatevever you wish, like binding button three (under the scroll wheel) to button 6.
I have a Sharkoon Fireglider. It is relatively cheap, but not big or clunky and it works very well.
According to the authority Mr Jinks, the correct plural is "meeces"
Get a vertical mouse, no more discomfort for any finger or arm, it also has 6 buttons.
http://evoluent.com/
> [...] only to find that they had put the right mouse button in the middle.
Then rebind them.
> a proper middle button is invaluable for pasting, [...]
So you must be using Linux, then what's the problem?
"(...) my hand categorically rejects two button mice â" the dangling ring finger causes me genuine physical discomfort (...)"
I recently noticed that a colleague that suffers from RSI and was in the process of trying different mouses holds his mouse different from what I do; I hold keep my ring finger and little finger both on the right side of the mouse, either stacked on top of each other or with both fingertips touching the desk surface. Mouse movement is controlled only using the thumb and the ring finger; the rest of my hand is normally not touching the mouse except for my finger tips. Forefinger controls the left mouse button, middle finger controls the right mouse button and the middle button/scroll wheel can be controlled by both fingers. I've always held my house that way and being a long time X-user, I have always used 3-button mice.
Having noticed that difference, I tried holding my mouse the way my colleague did: one finger for each button. This causes major strain in my hand (exactly the place where my colleague had troubles), probably because my fingers have different lengths. So I went around the office, asking people how the held their mouse and whether they had complaints. Turns out, most people held their mice in a way similar to how I do it. Those that didn't had more trouble with their hands.
I'm not saying you should switch hand-on-mouse position; everybody's different. However, you might want give it a try.
0x or or snor perron?!
The most common mouse failure is the microswitches. Most mice use the exact same switch... Ten minutes, a cheap pencil iron, desolder wick, and some solder, and you are good to go for another few years.
I've been nursing along an original Trackman Marble for twenty years this way.
Yay so you are put out that mice have 10+ buttons these days, well done you have the most replies to a topic on the front page, and for why? Because you can't handle change and embrace the much more useful modern mice designs and all their dizzying functions by retraining yourself to use your "ring finger" for right click and your thumb for everything else. Behold this persons inability to learn a new skill. bravo, we should hold you aloft.
Where are the noiseless mice?
I know there are computer parts to make literally silent mice, with buttons that don't make any sound. Why the fuck isn't such mice a purchasable option?!?!
Got to say, I middle-click a lot and I've not had a problem with the MS Intelimouse for this purpose.
soylentnews.org
I bought some months ago a 3-button rodent from HP from Amazon, for a horrible price.
Serach for "HP optische Notebook Maus schnurgebunden schwarz" on the German Amazon.
My use case: Plan9.
For me it's the best device I ever had to work with.
It's a 5 Button mouse with 2 for the Thumb, and three on top.
The scrollwheel can easily be swithched from stepping mode to free wheeling which is very convenient when surfing the net or reading big documents. It also supports sideways scrolling. The middle button is behnd the wheel. I also have come across mice with scroll wheels also been used as middle button and found this setup almost unusable.
As I hold the mous loosely between thump and pinky, I have three fingers resting relaxed on top of mouse and use the middle finger for scrolling and pasting.
Early last year I had to work at a customers premise with a 2 Button mouse with tail ;) and got a severe RSI.
After changing to use my own - and of course some treatment and changing to my left hand for mouse usage - I'm now fine again.
BTW: There I have to work in a W7 environment :-((( - OTOH hand in my own organisation there is not even a single peace of crap from Seattle.
http://www8.hp.com/in/en/products/oas/product-detail.html?oid=403895
My ring finger sits nicely on the side of the mouse. I have an LG gaming mouse though so maybe that is why it is comfortable.
Obviously, what you want is a really old mouse. There's loads of them out there. Lots of the ball mice were perfectly useful. Get a 3M precision mousing surface to go with your mouse, they lay very flat and they grip very well. Every time I go to a flea market I see dozens of old PS2/Serial Logitech mice with three buttons.
"You're right," Fisheye says. "I should have set it on 'whip' or 'chop.'"
You really should just look on eBay. I see several listed.
I had this issue a few months ago. Did not need a mass of buttons and just wanted a reliable 3 button mouse. I can recommend the Roccat Lua.
The rocker (kind of a see-saw instead of a wheel) was much easier to control, and far less carpal tunnel in your wheel finger (thanks, MIcrosoft!). Pressing down, between the two ends, was the middle button click.
Ever try a vertical mouse? One of the mist popular ones has a full-size middle button. http://www.amazon.com/Evoluent-VerticalMouse-Regular-Right-VM4R/dp/B00427TAIK
The Evoluent Vertical mouses have three base buttons, are ergonomical and is programmable.
http://evoluent.com/products/v...
Serge
So I found some satisfaction in a Mouse-Trak:
http://www.itacsystems.com/evo...
No scrollwheel though.
Get anything Razor. you will not be disappointed!
Hello OP, I came here half expecting this to be an obvious, hammered advice but apparently our nerd crowd is stuck with Logitech shenanigans so here it goes: http://www.razerzone.com/gaming-mice/razer-deathadder-black
I won't try to sell it, I'll just say it's been my mouse of choice over the last few years, possibly decade. Time is a funny thing.
I've used a *lot* of different mice out there, and I keep settling on Logitech's MX series as one of my favorites. .... and now the Performance Mouse MX.
I used to have their MX1000 laser mouse, and then the MX Revolution
My only complaint about these mice is that the black rubber "grippy" areas on the sides where you rest your fingers wears off after a while in spots, making the mouse look pretty ragged/beat-up at that point, even if it's still functional otherwise.
I also preferred the MX Revolution's charging cradle to the current design where you just plug a micro-USB cable into the front of the mouse to recharge it. (I find the micro USB cable to be a bit difficult to get inserted just right, and I have a feeling it will be one of the things that breaks first on this mouse.)
What I'd really like to see, though, is a bluetooth version of one of these. If you're a Mac user (especially of a notebook like the Air which doesn't have a lot of ports), a bluetooth mouse makes much more sense than wasting a USB port with a wireless receiver dongle. But there's VERY little available in the way of quality bluetooth mice. HP makes a couple of Z series BT mice, but the more expensive ($60 or so) one that tries to look like an Apple product (complete with gesture support on the flat top surface) fails to impress. Other than it's promised long battery life, it was nothing but negatives when I tried it. Gesture support is jerky and overly sensitive, unlike Apple's own Magic Mouse -- and the buttons start acting up where they stick when pressed or fail to register when pressed. The cheaper black Z series BT mouse from HP actually feels more comfortable in my hand and works better as a standard mouse (no fancy gesture support or slim line buttons that don't work right). BUT, drop it on the floor even once and expect it to blow up into pieces all over the floor.
Yeah, but there's no way to map the "middle" of the three top buttons to the middle mouse button - with on-board memory you can just swap the left and middle buttons...
"I'm not anti-anything, I'm anti-everything, it fits better." - Sole
The dePraz "Swiss Army Mouse" was standard equipment on the Teletype/AT&T 5620 graphics terminal in the mid 1980s.
Nothing wrong with that. I bought a new system from nixsys about a month ago so that I can play old Windows 98 games on a system made from mostly new components. Personally, I love Apple trackpad for use on both OSX and Windows. But early mouse systems 3 button mice with a special metal pad also had amazing and reliable precision, unlike modern optical mice where you constantly have to worry about having perfect surface or suffering from little slips when you move them around.
what a perfect old man rant
You can enable chord-middle (I don't like it) or setup your .Xdefaults to use a different mouse button or key stroke for past. those xrdb files are ugly, but quite powerful.
I drilled a hole in my trackball and mounted momentary switch for middle click, makes for a cool retro looking button. Since most mouse buttons are a basic switch, it's very easy to keep the original circuit in parallel without any fancy electrical knowledge.
“Common sense is not so common.” — Voltaire