I've lost my faith in Riddle to make anything good.
I'm just worried that he'll insist that the protagonist is a replicant or something like he did for Blade Runner, when there really isn't that vibe in Do Androids Dream of Electric Sheep?. He admitted in an NPR interview that he never read the book before making that movie, so I don't think that he's qualified to make such declarations.
I suspect that the name is also a bit of an homage to Back to the Future, but given that Musk is of South African origin and didn't move to North America until three years after the movie came out, I'd like to hear it from the horse's mouth to be sure.
It would also make sense that since SI prefixes are fairly well known and since Giga- is the largest that most consumers are familiar with and associate as being large, it's a way for them to name a plant so that it has obvious technological associations, while still allowing for growth (Terafactory, Petafactory) as both the need for manufacturing capacity and the public's understanding of bigger SI prefixes change.
Yup. It's one thing to offload a bunch of the processing and systems to a third-party, but one should always keep one's finger in the pie, at least in the form of backups or DB mirrors. One might not be able to go operational instantly if the cloud provider goes down, but if one's data is intact then one can either spin-up with some capital investment or can migrate to another cloud provider. If one doesn't have one's data, one can't do that.
The fiber optic cables carrying the data had no problems being immersed
For the immediate emergency, no, they didn't.
Long-term, fiber is susceptible to water damage. I had a site that needed fiber replaced because the Christy vault was placed too low in the ground and got inundated with irrigation water. The fiber didn't even splice in the vault; it was just a pull-point where the conduit stubbed up into the vault and a new conduit dropped back down, but the conduits filled up and the fiber degraded fairly quickly despite being gel-filled OSP. For awhile we kept testing and moving to different strands as the ones we were on failed, but it didn't take long before it had to be replaced. Fortunately the contractor was able to eliminate that particular vault entirely, splicing the conduits together after getting the moisture out, and we haven't had a problem since.
Are you saying that Khan wouldn't, himself, look to continue to apply the same projects to others that created him? With his support for eugenics he'd want to replace the entire human population with engineered individuals.
Friend of mine did that with a shotgun when he was ten, outermost joint of his index finger one one hand. Several years later when he was in shop class he knicked the nub with the table saw and it started bleeding. The nurse came to the room and passed out when she saw what she thought was a freshly amputated finger...
So the results can be highly entertaining, even if only from time to time.
...the initiative, led by Khan Noonien Singh, looks to improve the quality of life and longevity, strength, and memory for all humans, over the entire planet. On the goals of his project, Khan replied, "Improve a mechanical device and you may double productivity, but improve man and you gain a thousandfold."
Well, if you look at Africa, which probably has the largest population living in rough conditions, and there's a lot of habitat destruction for firewood for cooking fires and generally any animal that can be caught goes into the pot. Sure, there's poaching for precious material like ivory, but there's also poaching simply to not starve.
This is something to consider with the widespread ranching of cattle- we want our meat, so it's either a matter of raising it ourselves with a few sets of monolithic species where we manage to use the bulk of the carcass for something, or catching wild animals where we don't fully utilize the animal and leave a lot of waste. Right now, by mass, Beef if the dominant life form on the planet.
Never saw Titanic (I think I'm one of three people on the planet over the age of eighteen that can claim this) but I liked how that New York police chase scene in The Fifth Element turned out. I've heard it argued that it's how that Stallone version of Judge Dredd should have looked, had they actually put the urban density in to Mega City 1 that it should have gotten.
Alas, I never got past using 3d Studio R4 in a very rudimentary way. Probably didn't help that my computer at the time lacked the horsepower to render anything meaningful quickly enough to be usable for any other function, so it just wasn't feasible to get into it. Oh well.
Unfortunately cool stuff like the Video Toaster...never made it to Europe (AFAIK, I never saw one except in promos on American TV)
Yeah, you had a thing for Kiki Stockhammer didn't you?
Last I saw her was in 2004 or 2005, she was the female lead for Warp 11, a Star Trek themed punk band out of San Francisco. The band was headlining at Enigma Con at UCLA, which greatly expanded after the Boxing Day Tsunami as probably 60 actors came out to support the con for its charity fundraiser for the relief efforts.
It's kind if amazing to think that Babylon 5 was created in large part on this era of Amiga and that while a little dated, has held up pretty well compared to some of its contemporaries. Foundation Imaging went on to work on Star Trek DS9 and Voyager, likely using Amigas at least for some of DS9 at least.
Obviously at this point the computer is probably worth more as a teaching tool and curio than as a production machine, but it definitely paved the way.
Yeah, I remember a movement several years ago to try to swamp them with too much information. The problem with this approach is that it doesn't account for ever-increasing storage density combined with a need to replace end-of-life equipment periodically, essentially guaranteeing that they'll never run out of space.
I think that we really are the descendants of the B Ark sometimes.
The intelligence of a group can be calculated. Take the IQ of the least intelligent person in the group, and divide that by the number of members of the group.
Well, I'd argue pen, paper, hand count, not pencil, but your point still holds.
As voting "irregularities" have been reported on over the years, I've wondered about the possibility of generating ballots on-the-fly. It would be really convenient if one could vote at any polling station in the county or state by simply presenting one's ID and having a ballot for one's various districts generated, so if one's local polling places are overwhelmed or if one wants to vote close to one's workplace one could use a different polling station, but given the failure of governments to maintain voting equipment I don't see how that can be possible. I'd also thought about electronic means that generate a paper receipt, but there's still no real guarantee that the machine tabulated the vote correctly or that the voter will have recourse if the receipt shows something other than what the voter intended.
Hence my support for optical scan with the ability to hand-count.
The second system is entirely separate. It exists to present the voting options, register your choice and add your vote to the tally. To take the example of a polling station, when you arrive and register to vote you are given a key - one key per voting machine. You present this key to the machine, it permits access to the vote casting user interface, and once the vote is cast it interlocks the machine from presenting the voting options again until it is removed from the machine and returned to the polling clerk, who inserts it in a "reset machine" facility at his desk. (This is required to stop you just running the voting programme lots of times and casting many votes.) Note that this system knows nothing about your true identity, just that it has been used to register a vote.
Except that I have no control or even a method to confirm that this second system is truly a second system. In paper ballot voting in a polling station I physically see that my ballot bears no distinguishing marks before I fill it out, I see that it goes into a hopper with hundreds of other ballots, and I see that they don't note the time that I've come in to vote, only that I have.
I have no such observation of the inner workings of an electronic voting system. They cannot prove to me that they aren't tracking my account with even something so innocent as a simple timestamp relative to when my vote is cast.
I believe that all 'electronic' voting needs to use a human-readable, human-filled-out paper form that is optically scanned.
Where I live, ballots are large pieces of cardstock with the various questions printed on them, and the voter marks a line between two pre-printed lines (one with an arrowhead pointing at the answer it corresponds with) to indicate preference. The ballots go through the scanning machine and are then deposited into a box like a traditional hand-counted system. If elections are especially close or are challenged by a candidate or group on one side of a particular ballot initiative then the paper ballots are re-counted by machine and by hand. Sometimes a voter makes a mistake when filling out the ballot (like putting X or checkmarks instead of connecting the lines) but if the election official can determine the voter's intent (ie, a checkmark next to a particular candidate's name or in place of where the line should be) then the vote can be counted.
I don't believe that any system of e-voting is practical, even if such a system somehow manages to avoid any sort of tampering with voter's selections.. The electronic safeguards that would be necessary to ensure one voter, one vote would make it impossible to anonymously vote, and the anonymous ballot box is one of the cornerstones of democracy as it prevents a sore winner from seeking retribution against those that attempted to unseat him.
But for security through obscurity to work, the level of obscurity required is generally high, bordering on outright-secret, or the payoff needs to be so scant that there's no reason to bother in the first place.
Security through obscurity might work for something like a power plant control system because we don't know the architecture of the hardware that it runs on, the operating system or if there is a third-party OS, the language it's written in, or even its name, and given the importance of the application it probably wouldn't be permanently Internet-connected, and if it needs to send out notifications it might communicate through a unidirectional RS232 link or something along those lines, or through a transmit-only fiber link (so that there's not even receive hardware on the platform). Certainly there would be some people that really want to break in, but it's exceedingly unlikely that they'll ever be in a position to do so.
Security through obscurity can also work when the system is not terribly important. I don't doubt that the Energy Management System controllers that interface the HVAC systems in commercial office buildings to the computer networks are garbage as far as their code is concerned, but there's not much someone can do with those in most cases. So even if there's ability, there's no real payoff, and the systems are so incredibly simple and underpowered that they'd make for poor intermediaries in a greater attack even.
By contrast, voting equipment is usually distributed widely and is not particularly heavily guarded, and as it needs to be inexpensive to produce in mass quantities it's often commodity hardware, off-the-shelf parts if you will, and there have been documented cases of electronic voting hardware have exposed and functional USB ports. As vote tallies are imortant it's not inconceivable that someone could borrow or steal a voting machine to figure out how it works and to find some way to mass-tamper with them, like distributing USB fobs to their fellows to use on them to load a package. In these cases, obscurity simply doesn't work because the system can't remain obscure.
I see no difference between Google Wallet, Amazon Payments, and Paypal. I see unnecessary means by which to exchange money that just adds complications.
Cash on the barrelhead works fine for all small purchases.
Slashdot Mirror
I'm just worried that he'll insist that the protagonist is a replicant or something like he did for Blade Runner, when there really isn't that vibe in Do Androids Dream of Electric Sheep?. He admitted in an NPR interview that he never read the book before making that movie, so I don't think that he's qualified to make such declarations.
Good. Then it won't accidently time-travel when it's borrowed to attempt to escape from terrorists that are unhappy about their pinball machine...
I suspect that the name is also a bit of an homage to Back to the Future, but given that Musk is of South African origin and didn't move to North America until three years after the movie came out, I'd like to hear it from the horse's mouth to be sure.
It would also make sense that since SI prefixes are fairly well known and since Giga- is the largest that most consumers are familiar with and associate as being large, it's a way for them to name a plant so that it has obvious technological associations, while still allowing for growth (Terafactory, Petafactory) as both the need for manufacturing capacity and the public's understanding of bigger SI prefixes change.
Yup. It's one thing to offload a bunch of the processing and systems to a third-party, but one should always keep one's finger in the pie, at least in the form of backups or DB mirrors. One might not be able to go operational instantly if the cloud provider goes down, but if one's data is intact then one can either spin-up with some capital investment or can migrate to another cloud provider. If one doesn't have one's data, one can't do that.
Uh, the airlines are well aware of the geopolitical situation, they could have chosen to alter their flightpath if they wanted.
For the immediate emergency, no, they didn't.
Long-term, fiber is susceptible to water damage. I had a site that needed fiber replaced because the Christy vault was placed too low in the ground and got inundated with irrigation water. The fiber didn't even splice in the vault; it was just a pull-point where the conduit stubbed up into the vault and a new conduit dropped back down, but the conduits filled up and the fiber degraded fairly quickly despite being gel-filled OSP. For awhile we kept testing and moving to different strands as the ones we were on failed, but it didn't take long before it had to be replaced. Fortunately the contractor was able to eliminate that particular vault entirely, splicing the conduits together after getting the moisture out, and we haven't had a problem since.
Are you saying that Khan wouldn't, himself, look to continue to apply the same projects to others that created him? With his support for eugenics he'd want to replace the entire human population with engineered individuals.
I was saddened when he died. He could no longer autogragh the owners' manual for my Cordoba...
Friend of mine did that with a shotgun when he was ten, outermost joint of his index finger one one hand. Several years later when he was in shop class he knicked the nub with the table saw and it started bleeding. The nurse came to the room and passed out when she saw what she thought was a freshly amputated finger...
So the results can be highly entertaining, even if only from time to time.
...the initiative, led by Khan Noonien Singh, looks to improve the quality of life and longevity, strength, and memory for all humans, over the entire planet. On the goals of his project, Khan replied, "Improve a mechanical device and you may double productivity, but improve man and you gain a thousandfold."
Well, if you look at Africa, which probably has the largest population living in rough conditions, and there's a lot of habitat destruction for firewood for cooking fires and generally any animal that can be caught goes into the pot. Sure, there's poaching for precious material like ivory, but there's also poaching simply to not starve.
This is something to consider with the widespread ranching of cattle- we want our meat, so it's either a matter of raising it ourselves with a few sets of monolithic species where we manage to use the bulk of the carcass for something, or catching wild animals where we don't fully utilize the animal and leave a lot of waste. Right now, by mass, Beef if the dominant life form on the planet.
Never saw Titanic (I think I'm one of three people on the planet over the age of eighteen that can claim this) but I liked how that New York police chase scene in The Fifth Element turned out. I've heard it argued that it's how that Stallone version of Judge Dredd should have looked, had they actually put the urban density in to Mega City 1 that it should have gotten.
Alas, I never got past using 3d Studio R4 in a very rudimentary way. Probably didn't help that my computer at the time lacked the horsepower to render anything meaningful quickly enough to be usable for any other function, so it just wasn't feasible to get into it. Oh well.
Yeah, you had a thing for Kiki Stockhammer didn't you?
Last I saw her was in 2004 or 2005, she was the female lead for Warp 11, a Star Trek themed punk band out of San Francisco. The band was headlining at Enigma Con at UCLA, which greatly expanded after the Boxing Day Tsunami as probably 60 actors came out to support the con for its charity fundraiser for the relief efforts.
It's kind if amazing to think that Babylon 5 was created in large part on this era of Amiga and that while a little dated, has held up pretty well compared to some of its contemporaries. Foundation Imaging went on to work on Star Trek DS9 and Voyager, likely using Amigas at least for some of DS9 at least.
Obviously at this point the computer is probably worth more as a teaching tool and curio than as a production machine, but it definitely paved the way.
Then I'm glad that you were here to take one for the team!
Yeah, I remember a movement several years ago to try to swamp them with too much information. The problem with this approach is that it doesn't account for ever-increasing storage density combined with a need to replace end-of-life equipment periodically, essentially guaranteeing that they'll never run out of space.
I usually use ibm.com actually, since it's much less likely to be cached. No idea what the IP is.
Or I use google's 8.8.8.8 since it's not DHCP-assigned and is also less likely to be cached.
I think that we really are the descendants of the B Ark sometimes.
The intelligence of a group can be calculated. Take the IQ of the least intelligent person in the group, and divide that by the number of members of the group.
Just venturing a guess, but probably Google, Facebook, Youtube, MSN or the like...
Well, I'd argue pen, paper, hand count, not pencil, but your point still holds.
As voting "irregularities" have been reported on over the years, I've wondered about the possibility of generating ballots on-the-fly. It would be really convenient if one could vote at any polling station in the county or state by simply presenting one's ID and having a ballot for one's various districts generated, so if one's local polling places are overwhelmed or if one wants to vote close to one's workplace one could use a different polling station, but given the failure of governments to maintain voting equipment I don't see how that can be possible. I'd also thought about electronic means that generate a paper receipt, but there's still no real guarantee that the machine tabulated the vote correctly or that the voter will have recourse if the receipt shows something other than what the voter intended.
Hence my support for optical scan with the ability to hand-count.
Except that I have no control or even a method to confirm that this second system is truly a second system. In paper ballot voting in a polling station I physically see that my ballot bears no distinguishing marks before I fill it out, I see that it goes into a hopper with hundreds of other ballots, and I see that they don't note the time that I've come in to vote, only that I have.
I have no such observation of the inner workings of an electronic voting system. They cannot prove to me that they aren't tracking my account with even something so innocent as a simple timestamp relative to when my vote is cast.
I believe that all 'electronic' voting needs to use a human-readable, human-filled-out paper form that is optically scanned.
Where I live, ballots are large pieces of cardstock with the various questions printed on them, and the voter marks a line between two pre-printed lines (one with an arrowhead pointing at the answer it corresponds with) to indicate preference. The ballots go through the scanning machine and are then deposited into a box like a traditional hand-counted system. If elections are especially close or are challenged by a candidate or group on one side of a particular ballot initiative then the paper ballots are re-counted by machine and by hand. Sometimes a voter makes a mistake when filling out the ballot (like putting X or checkmarks instead of connecting the lines) but if the election official can determine the voter's intent (ie, a checkmark next to a particular candidate's name or in place of where the line should be) then the vote can be counted.
I don't believe that any system of e-voting is practical, even if such a system somehow manages to avoid any sort of tampering with voter's selections.. The electronic safeguards that would be necessary to ensure one voter, one vote would make it impossible to anonymously vote, and the anonymous ballot box is one of the cornerstones of democracy as it prevents a sore winner from seeking retribution against those that attempted to unseat him.
But for security through obscurity to work, the level of obscurity required is generally high, bordering on outright-secret, or the payoff needs to be so scant that there's no reason to bother in the first place.
Security through obscurity might work for something like a power plant control system because we don't know the architecture of the hardware that it runs on, the operating system or if there is a third-party OS, the language it's written in, or even its name, and given the importance of the application it probably wouldn't be permanently Internet-connected, and if it needs to send out notifications it might communicate through a unidirectional RS232 link or something along those lines, or through a transmit-only fiber link (so that there's not even receive hardware on the platform). Certainly there would be some people that really want to break in, but it's exceedingly unlikely that they'll ever be in a position to do so.
Security through obscurity can also work when the system is not terribly important. I don't doubt that the Energy Management System controllers that interface the HVAC systems in commercial office buildings to the computer networks are garbage as far as their code is concerned, but there's not much someone can do with those in most cases. So even if there's ability, there's no real payoff, and the systems are so incredibly simple and underpowered that they'd make for poor intermediaries in a greater attack even.
By contrast, voting equipment is usually distributed widely and is not particularly heavily guarded, and as it needs to be inexpensive to produce in mass quantities it's often commodity hardware, off-the-shelf parts if you will, and there have been documented cases of electronic voting hardware have exposed and functional USB ports. As vote tallies are imortant it's not inconceivable that someone could borrow or steal a voting machine to figure out how it works and to find some way to mass-tamper with them, like distributing USB fobs to their fellows to use on them to load a package. In these cases, obscurity simply doesn't work because the system can't remain obscure.
I see no difference between Google Wallet, Amazon Payments, and Paypal. I see unnecessary means by which to exchange money that just adds complications.
Cash on the barrelhead works fine for all small purchases.
I guess that who you get to post is now simply a toss of the Dice...
Well, it is possible to polish a turd another way, but it takes a very, very, VERY long time.
Corpolite