Slashdot Mirror
155Mbs Over Copper Lines
FIGJAM writes: "Actelis, based in Fremont, California, have raised $26 million to enable speeds up to 155Mbs over copper lines by overcoming crosstalk interference with error-correction." The article is unfortunately short on technical details, long on current telecom market financial conditions. There's a bit more information on their website, but be warned, it's nearly as buzzword centric and glib. The speed of fiber over existing copper is still too tantalizing to ignore, though, even if it's not as sexy as actual fiber to the home.
then why does intel have it? just do a search on google for "gigabit ethernet over copper" and you will see all the hits that come up...
yahoo has a little bit longer article http://biz.yahoo.com/bw/010529/2233.html
Damn, I'd just settle for 640k DSL.
Nobody will ever need more than 640k DSL!
I live less than 50 feet from the CO. It really sucks when Verizon guys leave that damn blinking light on the top of the van on over the whole damn weekend.
That would be milli-bits per second.
1/1000(or is that 1024?)th of a bit per second.
155mbs over copper is a piece of cake! We had those speeds years ago.
Fiber optic cable is not just another type of wire. It's much more difficult to work with, and installation (on a large scale) requires more skill than your average phone/cable company truck monkey posesses.
Besides, what in the world would make communications companies WANT to do such a thing? If the current broadband market has shown us anything is that residental internet is a suckers game. There's no profit in it.
I have the first issue of Wired magazine, and there is a brilliant column (back page) by Nicholas Negroponte (of the MIT media lab) -- he makes a fairly profound and accurate statement: by in large, the massess are not willing to pay extra money for extra quality. The article was about HDTV an his assertion was that it would never catch on (by market forces alone), unless the government forced it on us via regulations.
The same can be said of broadband -- the masses are overjoyed with AOL and MSN...the rest that arent arent big enough of a market to bother with.
Sshhh!! Don't tell anyone or everyone will start up an ISP and get free bandwidth too. :-)
I've got wireless 11MBps Internet connectivity from my laptop. Unfortunately there's a bit of a bottleneck where it goes into my ISDN line upstream limiting me to 128KBps but hey though, I've still got 11Mbps wireless from my laptop!!! I bet the ISPs are lining up to turn up gigabit speeds from the ISP to the home for $40/month.. afterall, ISPs don't pay for their bandwidth right? :-)
http://www.qwest.com/about/qwest/QwestCyberCenters /NA_IP_Network_map_large.jpg
http://www.above.net/network/index.html
It's wonders what you can do when you also own the dark fiber/DWDM gear... Split a few lambdas off for yourself, sell the rest to cover your costs... Not too bad if you can afford it.
- ------------
-----------------------------------------------
---
Segmentation Fault ( core dumped )
www.gcpud.org
"We have the right to believe at our own risk any hypothesis that is live enough to tempt our will."
http://gabrielcain.com/
More importantly, if everyone had fiber at their home, no one's connection would be any faster than when we were all using 14.4K modems.
All the widespread existence of ridiculously fast connections to the backbone will yield is a ridiculously clogged backbone. Running fiber to businesses and homes will just push the bandwidth block back a step. It won't fix jack.
--
Do you have a
Cat5e is rated up to 350Mhz and can handle 1Gbit. 1000Base-T runs over Cat5e, and it is indeed copper.
That's what I get for doing math in my head at this early hour. 1000 mbps would be 1 bit per second. I was obviously thinking something about seconds per minute for some reason.
I see even classic Slashdot is now pretty much unusable on dial up anymore.
If you're so far away from the Central Office that voltage drop eats up that 48 volts, then your phone wouldn't work either. The problem with DSL and distance is that DSL runs at a higher frequency, i.e, needs more bandwidth, better high frequency response, than your phone. As wires get longer not only does resistance go up, but impedance does as well, and that tends to roll off high frequencies, so there's a point beyond which the length of the wire between you and the phone company is too long to deliver those higher frequencies.
I see even classic Slashdot is now pretty much unusable on dial up anymore.
mbps=millibits per second. 6000 mbps would be 1 bit per second, meaning about 10 seconds, including overhead, to transmit one byte.
I see even classic Slashdot is now pretty much unusable on dial up anymore.
(In the case of power lines I don't mind it so much. 60 Hz 120 volt AC is pretty much the same no matter from whom you buy it. The company from whom we buy electrical power is the same company from whom we buy delivery of that power. If we were buying power from some company other than the one that owns the wires that run to the house, the people with the package deal would probably get any of their problems dealt with first.)
I'm a lot less happy that our choice of cable TV providers is either Time-Warner or Time-Warner.
I'm beginning to wonder if the local telco (Carolina Tel&Tel as swallowed by Sprint--they've been saying "real soon now" on DSL for a couple of years) isn't waiting for Road Runner to put all the (few) local ISPs (which are all owned by regional companies now anyway, my account's been absorbed twice so far) out of business before they offer DSL so that they can be the only ISP available over DSL, and then they'll undercut cable by a few bucks to steal some Road Runner customers and grab all the new ones that come along.
I wonder if a lot of people will stay with cable anyway (I'm sure TW will offer some sort of TV/Internet package deal and make up the difference overcharging cable-only customers) just to avoid changing their email addresses.
I see even classic Slashdot is now pretty much unusable on dial up anymore.
I don't see telco's ever offering this service. Look how long they've drug their feet with DSL and the like. Hell ISDN has been out since the mid 80's, and telco's still can't seem to get it installed right. (At least Ameritech can't) DSL? Hell my ex back in 97 was beta testing ADSL from Ameritech in Ann Arbor, and yet years later, Ameritech has yet to fully roll it out. Honestly, how hard is it to support? Just add a few boards into the telco switch and volia, you have support.
If this was something that was available and at a reasonable price, it's something that I can see many many people picking up. I'd of course be in line for that much bandwidth. (Voice over IP comes to mind). But knowing how slow and lethargic telcos are, it will be at least 2010 before you start seeing anyone in the US with this service and much much longer before it's available nationwide as well as globally.
</rant>
--
"If you insist on using Windoze you're on your own."
"If you insist on using Windoze you're on your own."
In Canada, the telcos generally lay fiber right to the foundation wall of new homes.
:-)
They're laying copper to homes anyway, and the big expense isn't the fiber -- it's cheaper than copper -- but installation. Expensive to dig trenches, lay conduit, and all that shite. Costs damn near nothing to toss a bit of fiber in the pipe at the same time.
So there's a lot of dark fiber out there, just waiting for the profitability point to make it worth it for the telco to turn it on.
You should move to a modern country. We've got ADSL all over the damn place. Can't get away from it these days...
--
--
Don't like it? Respond with words, not karma.
This presumes that the bandwidth throughout the world is the same as when we were all using 14.4 modems (and apparently those of us with high speed connections are doing so at the expense of those with low speed connections?): Nothing could be further from the truth. The reality is that the backbone speeds of the net have gone up astoundingly (indeed there is lots of dark fiber out there waiting for the need). I get 200KB/second pretty much all day downloading from a good number of sites, and that number is purely an artificial limit in my cable modem.
Hmmm, I'd personally rather have fiber. Why would I rather see fiber widely distributed? Because it is multifunction. A single fiber line can carry hundreds of TV channels, tons of voice channels and even data channels for us internet users. Coax could do the same thing if cable companies and telephone companies were allowed to be a little more friendly with one another (ergo, getting higher throughput on copper means it could compete with fiber thus this article is is interasting however this is pushing the limits of copper wiring's data rate while optical fibers still have room left for bandwidth). Using fiber networks wouldn't necessarily destroy the country's backbones either, if anything it would spurn the usage of higher data rate routers and lines. IIRC the fastest backbone in the US is the OC-192 between Chicago and St.Louis owned and operated by MCI. RUnning fiber to homes and businesses is not going to automatically mean they've got an OC-3 in their garage. The owners of the fiber would just allocate data channels (just like on copper lines) and sell them to whoever wanted to use them. Video could be transmitted on channels a-b whilst data/voice is allocated to channels c-d with e-f (the letters obviously represent ranges of individual data channels) reserved for other usage. Wiring inside houses could easily be preserved by connecting it to a small autonomous bridge in a box on your garage. I could envision fiber to homes but this is marred by the reality that cable companies and telephone companies are both pretty stingy and the only real way to get fiber to the home is for the government to do it and control the lines themselves letting others fill them with content.
This brings up an interesting point, should municipalities get into the fiber game? Not for profit but merely to seed the technology's availability, especially since private organizations are not willing to do it. Routine maitenance of sewers, streets, and power grids could be used to lay dark fiber for later illuminating. If the process was tacked onto work already being done it could be made cost effective and it offers greater local competition for service. You'd get the fiber run to your house and opt to either keep your existing copper service to upgrade to fiber. With bridges linking the copper in your house and the fiber outside you wouldn't need to spend several thousand dollars on new equipment right off the bat. I guess I'm warm to the idea because my city has a municipally owned electricity company and is thus fairly exempt from the troubles of the rest of the state's privatized electricity generators.
I'm a loner Dottie, a Rebel.
Heh, funny. Maybe the whole idea _is_ that the various SDM channels must be in separate copper bundles and that the agegrate DSL line speed of a whole copper bundle happens to be 45Mbit/s...
--- Hindsight is 20/20, but walking backwards is not the answer.
I don't know, if it's copper and the distance is short, why not use DSL? 50x1.5mbit=75Mbit. I think we figured them out...
End of news, not even innovative for people not completely in the field...
--- Hindsight is 20/20, but walking backwards is not the answer.
"Spatial Division Multiplexing is just another way of assigning specific areas to transfer data in parallel, instead of using a serial transfer
method. It's basically dividing a space up into several channels."
Sure, just like HADM (Horse Ass Division Multiplexing) is. If they give it a nice name, that doesn't mean it means something nice.
The local loop copper is a twisted pair and is in no way comparable to fibre or coax (cable). Copper is copper, and in one pair, there is no 'space' to put channels next to each other (even the skineffect is frequency-dependent). The only way to do that is to bundle multiple pairs. Yeah right, groundbreaking technology my ass (or the horse's for that matter).
Your cable modem might top out at 2Mbit, but the protocol used puts 30Mbit in the same frequency band as one single TV channel. You're just not getting it all on your modem.
--- Hindsight is 20/20, but walking backwards is not the answer.
On their website, they have a press release that calls it patent pending 'SPATIAL DIVISION MULTIPLEXING TECHNOLOGY' (SDM), and they only claim DS3 (45Mbit/s).
They seem to have already tested it in the field, which explains the funding.
On another page of their website they mention a bit-error rate (BER) of 10E-10, one bit error per 1 billion bits at 10-100Mbit/s.
All they're saying that they are 'controlling the crosstalk interference'. Maybe they're just the first to try that, or maybe they did some advanced crosstalk modeling. I wonder how well that works if the crosstalk is caused by another SDM line?
Will this be another bluetooth? Works well in the lab, but when you cram a couple of devices close together it doesn't work as well?
--- Hindsight is 20/20, but walking backwards is not the answer.
waittta
/.
shoulda
lotsa
Goodness. Jar-Jar is trolling
--
--
"Outlook not so good." That magic 8-ball knows everything! I'll ask about Exchange Server next.
The big advantage of fiber, if it happens, is that it is a technology designed for data, and BW is limited only by how much terminal electronics you can afford. My question is, who is going to provide it? The traditional Telcos have failed, and the cable companies aren't much better.
The last mile is always going to be a problem. Wireless is way to bypass that. Maybe when we get 4G wireless networks...
-Lost in CT
Fiat Lux.
Clever, insightful marketing can be a form of enlightenment, if the product itself has intrinsic advantages. Broadband has Obvious advantages. Laying back and saying the great unwashed will never get it, is an *unwashed* thing to say. It's a cop-out, as well as being arrogant and self-serving, negative and oblivion-oriented. Wake up. Nex
sorry was a typo - but that shouldv been obvious
Do your best, hope for the best, suspect the worst.
It is nice to see the existing infrastructure being reused though, fiber to the home [at any speed] is going to take a LONG time to become as widespread as the copper telco networks, if it ever happens...
Try getting the price on 1000 km and compare *those* instead.
The high price of your tiny cable is not because of the fiber, but because of the connectors (5-10 bucks each, IIRC) and the labour, which was jacked up because fiber guys are very well paid.
Anybody can get a Cat5 crimper and a bag of cheap-o connectors and start cranking out cables. I've done fiber work and the equipment is *very* expensive, not to mention the attention to detail it requires to keep your signal losses minimised.
are powerlines copper? :)
I think they're usually aluminum (copper is 'spensive).
"Anyone that has ever gotten an idea based on any of my work and done something better with it-good for you."--J.Carmack
Go check out the proposed MPLampS, Electricity over IP draft.
;-)
There is hope for the people of Fremont.
the AC
Hemos is like...sci-fi fans;he thinks technology is cool, but he hasn't bothered to understand the science it's based on
That isn't funny; it's probably the trick, the key technology! Sometimes called an inverse mux, you take multiple lower-speed channels and combine them.
So they pump copper to its limit, do it over a bunch of pairs in parallel, and get a lot of bandwidth in the aggregate. Big whoop!
There is some effort needed in controlling interference, because most DSL technologies are mutually interfering, and degrade in speed when the subscription rate increases. But it's not going to give you 155 Mbps over a 5-mile loop from the CO to your house. Never will.
It's so nice to live in a small enough city that doing a complete rebuild of the cable system is actually feasible.
------
It's not theft; It's copyright infringement. Since that's been discusses 800 gazillion times already, I won't discuss it here.
------
Don't go putting Canada down. It's only 40% of our income...
------
No, you'll pay your money to private health, road / bridge tolls, insurance, etc. that the government in Canada provides at similar (or lower prices with Health care anyway). Doesn't matter who you pay, you will pay. If you don't pay someone for something, your salary will decrease to compensate. The wonderful thing about money is that it must be flowing to be worth anything. If it stands still long enough it becomes worthless. Anyway, tax is just another way to pay for things that you would pay for anyway -- eventually in some fashion. Transport, care, rule and order and insurance (welfare, etc.). If you don't believe me, take all your money out of the bank, sell your house, car, etc. and hold onto it for a decade. I've often wondered, would you rather make 100k and pay 50% tax or 50k and pay no tax? Do correct me if I'm wrong as this is my personal view at this point.
Rod Taylor
From what I understand (I don't work for a telco, however, so I may be misinformed) is that part of the issue is getting the DSLAM in the box on the corner. If there's not enough space in the green box on the corner of the street, no DSL for you.
EveryDNS. Use it. It works.
AC's need not reply
Having designed and deployed national DSL networks in 3 countries I can confidently say you know nothing about DSL and what it takes to deploy the technology.
I don't really understand what is the big deal here either... I currently have at&t at home and I usually get between 300K to 700K a second (that's not 30.0 and 70.0), which is between 2 and 4 1/2 times as fast as a t-1 line. I know I could push more bandwidth if they would let me. Most modern cable modems are capable of speeds much higher then this. The problem still lies in the fact that backbone bandwidth and equipment is expensive. It just doesn't seem cost efficient to offer ultra fast speeds at home when bandwidth and equipment charges exceed expected revenue. What we need to improve is not the last mile, but rather the backbone equipment and bandwidth. Make huge pipes cheap to the service providers and you would see ultra fast speeds at home. : )
...or actually something like 15,000 feet, which is the telco's DSL limit.
I'm no telco guy, but I know a couple and dimly recall conversions like '...some people are 40,000 ft or more from the c/o...' and '...the signal quality decreases rapidly when the DSL limit is reached'
1 Gbit @ 100 meters is here now. But if you recall from geometry, the area of a circle increases rapidly with the radius, so you get a lot of population outside the current DSL limit...and a horrendous amount outside the 100 meter limit.
This technology could change all that.
Treatment, not tyranny. End the drug war and free our American POWs.
Treatment, not tyranny. End the drug war and free our American POWs.
See my user info for links.
Now imagine what happens when you plan the backbone around expensive fiber optic lines, costs charged by backbone providers for bandwidth and traffic utilization incurred by smaller ISPs, and a customer base using correspondingly smaller connections which, when aggragated, use up a big chunk of the big pipe while allowing some room for spikes in traffic, customer growth, etc. That all sounds pretty managable, right? Now imagine what happens when you give the users a connection that rivals what chunks of the backbone can do, eclipse the rates attainable by interfaces on routers, switches, and servers. Imagine what kind of damage someone like Mafiaboy could do? Imagine what kind of capactity problems you'd see just from normal usage?
perl -e 'print $i=pack(c5, (41*2), sqrt(7056), (unpack(c,H)-2), oct(115), 10)'
What, me worry?
Ameritech? There is your problem right there. I've lived all across the country, and I have to say that their sevice is the biggest steaming pile of crap so far. If you're in Ann Arbor, or close, trust me, get a ComCast cable modem. Service was a bit better under MediaOne, but overall I'm
satisfied.
Ok, I don't really think I have anything useful to say...
--Josh
There are exactly 42,935,718 letter sized sheets in a square mile.
This article caught my interest and rang a bell somewhere in my mind. I recalled reading such a discussion in an older issue of Nature (the month escapes me.. sometime in 98-99) with an article entitled "Does Nyquist have a limit?" Despite the article's tantalizing title, it made quite a few interesting points:
1) Is our current understanding of "physical upper limits" of a medium such as copper a correct one? IE: Are we considering all variables when coming up with an upper limit. Past experiments have shown that (possibly constant!) factors such as quantum-level cross-talk may cause us to re-evaluate past limit measurements and scale them with respect to these until-now undectable, unavoidable "noises."
2) If we ever do find a suitable upper bound, how will factors such as "Information Entropy" allow co-existence between a medium's electromagnetic spectra emissions and future attempts at compression via medium microdeformities?
The audacity of this article is quite unnerving. But like the poster said, it wasn't exactly technically based.
Because where I live, my connection is the equiv. to a post-nuclear wasteland... I don't know if that made sense..
anyway, 26k dialup is all I can get.
no 56k
no cable
no dsl
no 128k ISDN, but I can get 64k ISDN for $115 a month.. don't think so
wireless, I don't know yet.. probably not, considering I have trees around me
satellite, high latency sucks
tin cans and fishing line, I don't have enough to reach that far
I hate the internet,
Klowner
Not all telephone lines are CAT3... my home (built in 1994) has two-pair (4 conductors) and about 8 twists per foot (somewhere in the middle of cat3 and cat5). My older home had flat (no twists) two-pair running in the walls. I have no idea what sort of cable comes from the telco to the pedestal in my yard, but from the pedistal to the box on the side of my house is six-pair (12 conductors) with probably 8 twists per foot and it's thick (22 guage versus the 24 guage normally used for telephone and network wiring).
True, the fiber backbone isn't the bottleneck -- but the routers and switches *are*. Points where you need to convert from optical to electrical and often back to optical again. That's why optical switching companies were the darling of the tech sector until the bust -- while there's more than enough fiber to last us for years to come, the switching technology is still woefully inadequate.
---
Sorry, but you can stop holding your breath. Fiber is an excellent backbone technology but it's too cumbersome, expensive, and difficult to deploy to ever become a "last mile" solution.
People clued in long ago that fiber to the workstation on corporate LANs was far more expensive than copper and offered no speed increases. Fiber to the home is the same -- it's cheaper to just install better quality phone cable or find better transmission methods for existing cabling. Why spend all that money on fiber?
---
Actually it is no where near that simple. There are a lot of problems with rolling DSL service out, and most of them are a function of lack of resources. Ameritech in particular lacks the manpower and cable availability to properly support a rollout of DSL.
Let me see if I can explain why a little bit. Back in the day (~15 years ago and earlier) the local telco would provision for basically 2 lines per household. At some point, shortly before the explosion in popularity of modems, cell phones and all the other toys we love to use, it was decided that this was wasteful and that fewer lines would be provisioned. This meant that that new subdevelopment would have only a minimal number of extra lines available to it. This also meant that once folks started using extra lines for modems, working at home, and the like, that upgrading them was no longer simply a matter of adding a few switches. Now they had to go and dig up that line and add more lines.
But it gets worse. DSL only works when the customer is close to the central office and when they have an uninterrupted connection to it. If they don't the line has to be "conditioned" to make it work. Have a bit of fiber cable between you and the office? Chances are you'll never get DSL any time soon. Conditioning the line is expensive and time consuming. Since the phone company isn't going to eat the cost of doing it so they can take a loss by billing you for $40/month which is much less than the several thousand dollar cost of doing the line.
Even if you are all set up from a technical point of view, there still are the issues with getting the equipment on the user's computer to work. The phone companies are simply not experienced in or set up for supporting end users with complicated copmuter equipment. Phones are easy, computers aren't. Remember, the local telco is still esentially a monopoly and has the same bureacracy and mentality of one even 20 years since AT&T split. I've seen it first hand. Anyone who thinks that these companies became nimble and customer responsive just because AT&T was broken up has zero knowledge of how they work on the inside. They are still not set up to hand customer service on the scale DSL requires.
There's a lot more to it than this but I'm tired of typing. Point is, there are a lot of issues we as customers don't generally see. General DSL rollout is going to take a LONG time. Learn to live with it.
1 bit represents two possible characters. 2 bits represent four possible characters. 3 bits represent nine possible characters. 4 bits represent sixteen possible characters
...if the 64 bits is broken into 8 bit words it can only represent 512 unique characters.
Looks like a crank. Or just a Troll ? Nevertheless this is total nonesense - dont bother.
Is that kilobits or kilobytes? If it is kilobytes, you are getting way better bandwidth than me. If it is kilobits, I pity you. I have a 128/kilobit cap (instituted recently) and I am missing my old upstream speeds. I used to be able to stream a video to work from my house, or sync my MP3 collection, but it just isn't possible anymore. Boo-hoo poor me :{
Enigma
Enigma
You guys are killing me here. I work in the Telco industry, and I have a few points to address.
1) This technology already exists. It has for a while. It's called HDSL. When we need bandwidth at a remote site that is not fibre fed, we will install HDSL shelves to carry the payload. Install enough of them, and you will get your 155MB/s rate.
2) All the people that are whining about "I live in the city, less than 10,000 ft from a C.O., and I can't get DSL." . YOU may live 10,000 ft from the CO, but how far does that wire that feeds your house extend PAST your house. It may continue on for a mile or more past your house.
3) People who say "X" company has an OC-192 connection. No, actually they don't. Show me a company that has a OC-192 connection, and i'll show you a company that is blowing smoke out their ass. OC-192's (and recently OC-768) and the DWDM technology are used by Telco's as backbones. Do you really think a Telco is going to allow one of their backbones to be saturated by ONE customer?
4) Fiber to the house. Unless your house was built with it, don't expect to get it. The costs would be ASTRONOMICAL to lay a fiber to every house that currently has copper. Opening trenches is VERY labor intensive. (read:$$$)
5) To put DSL in a CO, its "just a couple of cards in the telco switch". WRONG. The whole point of DSL (other than speed increase), is to offload the processing/routing of the data away from the voice switch. To put DSL into a CO, they have to install an entirely different piece of equipment, called a DSLAM (Digital Subscriber Line Access Multiplexer). This box strips off the higher frequencies containing the data traffic before it hits the voice switch and routes it over the telco/ISP's ATM network, freeing up resources in the voice switch which would otherwise be dedicated to dial-up connections.
6) "It would be cheaper to use fiber than copper, because of the cost of a CSU/DSU and the setup." WRONG. Do people think that you can just plug this fiber into a fiber modem and BAM!, you have an OC3? THE most expensive part of a dedicated fiber connection is the ADM, which sits at the customer end and pares off/adds on the customers traffic from the other traffic on the ring or linear connection. (Add/Drop Multiplexer) The cost of a ADM is substantially more than that of a CSU/DSU.
7) And finally, to the person who stated "Forget copper, I want to get SONET". You can get SONET over an electrical connection (read: copper), its called an STS-x connection rather than an OC-x connection. I believe the STS-x connections now have a rate as high as STS-12.
/end rant.
I would be real curious to see pricing on an ISP end to see what it actually cost to have a full time, say T3 or whatever your average mom and pop ISP uses.
If you happen to keep reading this thread, what does that work out to? Say you have 3Mbit line that is constantly maxed out. What does that work out to, in terms of # of users, each downloading at 50 k/b sec or whatever. I'm not much for math... let's says you were supporting 56k dialup users, each maxing their connection, how many users could you support?
With Napster, et al, it seems like ISPs, Universities, etc. were complaining about all their bandwidth being used up - is it just because everyone had a fast pipe on their desk instead of a modem?
Cool, people in Fremont will be able to get high speed Internet through their powerlines during blackouts.
"A door is what a dog is perpetually on the wrong side of" - Ogden Nash
So your getting ripped off by how much to hang around at slashdot?
"By boosting the speed, range and reliability of copper, carriers can offer affordable, same day provisioning of DS3+ services (45 Mbps symmetrical transport) to virtually any copper fed Remote Terminal (RT) cabinet or Multi Tenant Unit (MTU)."
These speeds are not too a particular house, but to RT's and MTU's. In other words, to places like office buildings.
Further down:
"Additionally, transforming multiple copper pairs into a DS3 backhaul to bring the power of the fiber backbone to the final rural mile will make universal broadband service a reality sooner than anyone could have imagined."
"Multiple copper pairs into a backhaul" -- So it sounds like they are taking a bundle of between 25 and 50 and turning it into a 45 to 155 mbps link.
Still, this is pretty good. Right now, you get nearly a T1 (1.544 mbps) worth of speed out of 50 wires (25 56K modems). So 45 - 155 mbps is a big improvement.
Actually that quote goes along with a nice propoganda poster seen here (got one of those in my room)
There are a few significant differences between cat5 wire and telco wire, including:
1. cat5 is twisted (don't recall the interval), telco wire is not necessarily twisted. This makes a big difference on cross-talk.
2. telco patch boards are not engineered to prevent cross-talk across connections at the box.
There are probably other significant differences too.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~ the real world is much simpler ~~
--- -- - -
Give me LIBERTY, or give me a check.
imagine a beowulf cluster of these.....
waittta minute....
sorry wrong obligatory....
shoulda been:
lotsa more porn...a video for each of my monitors....
This is news? My roughest calculations show that copper line should be able to support one-point-twenty-one megabauds!
Oh wait, you mean the copper in my telephone line? Yes, well that's a little different story, isn't it? Now who's stupid?
joke man, joke.
~
The Senate and the Roman People. Or does this mean something else in /.-land?
Get thee glass eyes, and, like a scurvy politician, seem to see things thou dost not.--King Lear
Clearly, it's not cheap to drop a new building with late-model gear, fight the local regulatory battle for rights-of-way, and lay a better network around your favorite navigational hazard (Verizon, in my case) but I'm surprised at how impossible the task seems to be.
Balls, man: if you want to destroy your wetware, you can get all of the hard drugs you want, and they're not even legal. Broadband, which any wired person would want, seems as difficult as finding decent political candidates.
Get thee glass eyes, and, like a scurvy politician, seem to see things thou dost not.--King Lear
Get thee glass eyes, and, like a scurvy politician, seem to see things thou dost not.--King Lear
Don't feel too sorry for yourself. Because of crappy wiring, I max at 31.2k, and I live in a VERY large college town, with a population of 200,000!
I wouldn't assume that the average phone/cable company employees are too dumb to lay fiber. I've seen wiring jobs by the telco, and they quickly approach a degree of complication that I don't want to mess with. I've also seen the tools used by telco employees, which seem to have a level of sophistication that monkeys would be unable to use.
Its like assuming that since I can use the new iMac at home, those network admins in the back room must not require that much training. Hell, its just a computer, you turn it on or off, what more do you need to know. :)
he meant that it should be capitolized
----------
www.shockthemonkey.org
Photos.
Thankfully I've got cable! The wiring in my house won't even let a modem dial out. No online gaming for my dreamcast.
Get your Unix fortune now!
I love pointing out that I live in Cincinnati for some reason or another. I don't know why because I'd love to move... to let's say Savannah.
... whatever.
But back on topic. Here in Cincy [where Carmen Electra is from] we've had DSL before it was a buzzword you'd see in every Ziff Davis mag. We had cable in limited areas for a while, but upgraded pretty fast. Time Warner rebuilt the whole network, at least thats what I got from the letters you'd see tacked up in apartments and such.
I'd say were pretty quick to get 'broadband' access here, not like Cali, or Tokyo, but we get it pretty fast. Our local Telco [Cincinnati Bell, Duh?!] was even featured in some crappy Ziff Davis mag for their 'Internet Call Manager'.
What was the point? Oh yeah, if you want broadband, come here. RoadRunner Business Class, SDSL [downtown only, i think], ADSL
But I'll move where this gets implemented first.
My question is, why do we need a 'last mile' solution in this day and age? Why aren't we moving away from clients and get into complex networking of home users computers? Computers are getting more powerful, and more people are buying computers. Why does the internet community [big guys] not demand more from the home user?
Get your Unix fortune now!
I don't even own a modem anymore. There is one in my closet, but it's a 'soft'modem with sound etc. Fuck all that.
Get your Unix fortune now!
Spatial Division Multiplexing is just another way of assigning specific areas to transfer data in parallel, instead of using a serial transfer method. It's basically dividing a space up into several channels.
I know you can do this in optics: for example, use only one part of an optic for a specific channel, etc. but since copper is conductive you can't define boundries, which is where I assume the cross talk correction comes in.
However, SDM is very inefficient for copper networks. A cousin, frequency division multiplexing, which is used in optical networks, DSL, cable networks (frequencies divided up into channels) is much better suited. Fiber uses it as well.
Time division multiplexing is also used, and on high capacity optical pipes DWDM systems are used which multiplex channels over several wavelengths, which can also 'layer' FDM and other modulation and frequency style methods to get even more bandwidth. A single optical fiber has as much bandwidth as the diffraction and interference limited wavelengths seperation times the data frequency. You could very easily fit all the world's Internet traffic onto a single fiber using a very sophisticated DWDM-FDM (with wavelength spacings at the physical limits). But then you need to be able to seperate each very close wavelength out, and demultiplex the several GHz modulation of each thereof (picosecond response, anyone?). Not to mention the generation which involves inverse problems of the same nature.
But as far as SDM on a copper line, this is defeating its own purpose. IMHO, its better to have a high clock and go up in bandwidth on the line. Copper can handle 100's of channels of UNCOMPRESSED video, just look at your cable system. Your cable modem can barely handle 2 Mbps, which is a far cry from raw NTSC. We aren't even using a fraction of that for gigabit networking fiber-over-CAT5 as it is.
This may be an interesting method, but it's a step back. It might be good if it can do it over all the ancient POTs stuff and go to consumers, but then again it relies on self-correcting cross talk and interference models, which can only be taken so far and are only ideal in *ideal* conditions.
What we really need is a good CAT5 going to every house providing all data services, and DWDM hubs to transfer and enable dedication and not bandwidth sharing. But as someone else mentioned, the telco's like to keep us in the dark ages, so they can milk out as much as they can from their nth generation system. They'll take it for as long as possible, before they're forced to get up and realize those research dollars back in the 1960s have long since been payed for.
"I'll just chip in a bit for RedHat: I actually have that installed on my university machine." - Linus, '95
Damn right. Our T1 has gone down once in 2 years because a bit of gear blew up in the CO. Not a bad track record.....my cable modem on the other hand goes down about 4 times a month (even after replacing all the cable in my house with RG6). -ted
I don't think Northpoint customers wanted them to go out of business. -ted
Your local loop provider does not want to deploy this technology....here's why: Local Verizon T1 (1.5 mbps) fiber charge: about $400.00/mo. Local Verizon DSL (1.5 mbps if you can get it): about $150/mo. Verixon is not really pushing business DSL at these speeds because that would canabalize their T1 business. Do you think for a minute that Verizon would allow cheap, 155 mbps over copper circuits to destroy their T3/DS3/OC192 business? No way! The local telcos like selling fiber because it's viewed as "slightly exotic" and worth the higher monthly fees.
For some reason, when I saw the article I thought of cat5.
The article had me going for a while as I tried to figure out what the big deal was, I mean, we've had 1000Mb for copper for years now : )
Based on upvotes, Ageism is the only "-ism" Slashdotters care about and think isn't SJW
Until I see it at my curb or two-way satellite (or even ISDN) comes down in price in a major way, I don't care.
Perhaps you missed the /. article about all the backbone fiber that is being unused because there is not enough bandwidth on the last mile.
there is no bandwidth glut. Learn about industry news (sorry, won't find all of it here on slashdot, no matter WHAT you heard). There are exactly three lines with the "glut" that's been bragged about... and if something like this were to actually happen (every (l)user getting access to 155+ speeds), we WOULD lose most of our high speed current high speed connections. I just looked for the chart, and can't find it; when I do, I will gladly point you to it (it's either in the Net Economy or Network Computing).
could this tech be used by DSL providers to lengthen the distance of DSL availability?
since it seems that this would only be a good bet IF it could be available to most buissnesses and is it is, then why not most homes?
I am the Alpha and the Omega-3
KiloBYTES. 128kilobit isn't cable. It's dual-isdn-crap :o/ You should complain like mad.
Screw 3...
that much more income for the cable companies who insist that they're pushing all they can out of the lines by providing me with an 80 KB downstream cap
Screw 3...
Sure moving it out to the end user is new, but ATM has been kickin 155 Mbps over UTP for quite some time...since the article is short on any technical detail I can only speculate this is what it is (especially given that DSL is just really cell relay at some level, anyway). All major switch vendors sell this hardware. From my shaddy memory I recall sometime in the mid ninties a company called Micro Linear in Business Week peddling chips to do this. What's different?
I've always believed that it wasn't the inductive crosstalk but the capacitive short across the leads that killed the signal. At 155MHertz the capacitive impedance across the two leads ought to be virtually zero. You might as well try to pass a signal both ways thru the same wire. Telephone cable kills the effects of inductive crosstalk in a multipair cable by twisting the leads of a given line pair together to minimize the colinearity of the signals.
If they used thinner wires & used insulaters of a higher dielectric constant & increased the distance between leads the capacitance could be greatly reduced.
The last time I was with a cable cutting team, they were using a paper wrap on their 500 pair cables. It made probing pairs easy but I always figuired it added alot to losses.
That is all.
"I don't know that atheists should be considered citizens, nor should they be considered patriots." - George Bush
Is anybody else concerned that major internet lines would be overloaded. If everybody will start using video streaming, and major downloadage, the routers will start hiccupping.
And besides, My college has a decent fiber (OC-8 I think) and few people, but still each individual connotion only goes about 200 Kb/s (that's bytes).
So if you want to increase user end bandwith, make sure the main lines will handle it, or else we will start seeing legislation that will ban downloads of large files (bye-bye linux iso's and divx's), video streaming, and pr0n, just to make sure the routers stay up.
Remember, when you are downloading MP3's, you are downloading communism!!!
badness 10000
That is the exact place where I got it from....Hmmm....I guess I am infringing on the artist's content too...
And I don't even listen to music.....
Remember, when you are downloading MP3's, you are downloading communism!!!
badness 10000
Damn, I'd just settle for 640k DSL. It sucks to be 40,000 feet from my CO. *sigh*
--
Jesus. . . Count yerselves lucky ye don't live in Ireland though. We've been waiting 3 looonnnnngggg years to get any kind of DSL. Stupid Eircon.
.:: z-buffer
A peice of cake in the machine room. They are talking about running this shit all over town, which will make them lots of money. But they could make even more by releasing this shit at 10 Mbps and letting out the 155 Mbps version in a few years...
Geekizoid: The Small Shiny Things Network ©
Gobble a dick!
Sure...Wonderful Magical modems from the land of fairies and elves. Looking at http://www.usr.com, the web site of a popular modem manufacturer in this universe, and indeed even on this planet, I see that their modems are mostly limited to 56 Kbps. They also have some ISDN hardware and other networking hardware that is much faster, but their modems are far behind your mystical fairy modems.
Geekizoid: The Small Shiny Things Network ©
Gobble a dick!
damn. I thought they were just too stupid to use an M instead of an m. :P
Geekizoid: The Small Shiny Things Network ©
Gobble a dick!