Slashdot Mirror


Intel Funds AMD-bashing Report

Jim Norton writes "The Inqwell and ZDNet are reporting that the Aberdeen group, who recently published a report attacking the Athlon XP's processor rating system, was funded by Intel to produce the report. The articles also mention that AMD claims they were never contacted for information regarding this issue." From the benchmarks that various outfits have done on the new AMD chips, their model number is actually pretty conservative.

99 of 323 comments (clear)

  1. This has to be the new way of doing things. by Neck_of_the_Woods · · Score: 3, Insightful



    Microsoft funds for reports on Linux, Intel refunds for reports on AMD. I guess if you don't like someone you just pay someone off to blast your target. I was under the stupid impression that this kind of thing was sort of frowned on.

    I really don't know anywhere that would print something hostle just because it was pro one OS or the other...opss damn..nevermind.

    --
    Neck_of_the_Woods
    #/usr/local/surf/glassy/overhead
    1. Re:This has to be the new way of doing things. by Shadow99_1 · · Score: 2

      Actually AMD is trying to establish a series of testing criteria that will allow us to rate cpu's by means other than performance... Some fo the other chip makers have hinted they may at some point support the idea.

      Intel though has laughed at that as being nonsense & says publically that AMD's rating system is a way for them to appear more competitve against their Ghz rated products. Of course they refuse to comment on why to most benchmarks AMD's cpu's rated much lower in Ghz speed can equal if not beat the higher Ghz Intel made cpu's... Go figure...

      --
      we are all invisible unless we choose otherwise
  2. And in other news.... by Chester+K · · Score: 5, Funny

    And in other news, business as usual continued yet again today. Analysts continue to be shocked.

    --

    NO CARRIER
    1. Re:And in other news.... by TheViffer · · Score: 2, Insightful

      ya got it.

      Intel has taken a page from government officials. Many "reasearch" products are funded by governement officials.

      To the researcher getting this money is generally is better to give the results that the governement official wants to see rather then the truth. That way the researcher has a higher chance of being rehired since his/her results were liked.

      Business as usual is right, Intel just got caught.

      --
      -- Knowing too much can get you killed, but knowing who knows too much can make you rich.
  3. PR Rating Stupidity by Syllepsis · · Score: 5, Informative

    When AMD released the Athlon XP 1800+, every reviewer on the planet ran a battery of benchmarks and concluded that for most applications, the XP 1800+ not only beat the P4 1800 MHz, but also the P4 2000 MHz.

    When AMD released the Athlon XP 1900+, every reviewer on the planet ran a battery of benchmarks and concluded that for most applications, the XP 1900+ not only beat the P4 1900 MHz, but also the P4 2000 MHz.

    When Intel released the Northwood 2000 and 2200 MHz P4s and AMD released the XP 2000+, every reviewer on the planet ran a battery of benchmarks and concluded that for most applications the XP 2000+ beat the P4 2.0A but could not quite beat the P4 2.2A

    Then when AMD released the XP 2100+, many reviewers concluded that it tied or beat the P4 2.2A, although I really think that the 2.2A has the edge.

    Based on this data, what really happened, what is really happening, and what disinterested parties seem to believe, I would conclude that the AMD PR Rating system provides a very nice comparison of Athlon performance relative to P4 performance at the clockspeed of the PR rating. Even though AMD says the rating is to compare the Athlon XP to other AMD products, it is incredible how well it scales athlon performance to the P4 performance at the clockspeed of the rating.

    Therefore, if I wished to buy a machine, as a general purpose user, I think the best way to compare prices would be to match the AMD PR Rating against the Intel P4 clockspeed.

    OTOH, comparing raw clockspeeds would give a false conclusion that an Athlon XP 2000+ would not outperform a P4 1.7 GHz. Sure, this is true if you plan on using Newtek Lightwave (where all P4s beat all Athlons), but for most tasks you would be horribly in error.

    It would seem fairly obvious, that for this point in time, and with the current set of processors available, for the user who uses a variety of applications, the consumer would be better informed by using the AMD rating system than by just about any other comparison (other than carefully studying a battery of 30 different benchmarks)

    However, there has been a flurry of criticism of the PR rating.

    As much as I hate to cheerlead corporations, I just have to yell...

    FUD!

    ...and anyone who disagrees with me is invited to study any of the following review sites:

    Tom's Hardware
    Anandtech
    XBitLabs
    Sharky Extreme
    Lost Circuits

    etc... etc... etc...

    1. Re:PR Rating Stupidity by NutscrapeSucks · · Score: 2, Interesting

      Based on this data, what really happened, what is really happening, and what disinterested parties seem to believe, I would conclude that the AMD PR Rating system provides a very nice comparison of Athlon performance relative to P4 performance at the clockspeed of the PR rating.

      Intel funded FUD or not, the thrust of the report is because the PR ratings are based on pseudo-objective measurements, they are ultimately confusing to buyers.

      Mhz might be a very poor buying consideration, but at least it's an objective number, unlike AMD's rating system. Thus AMD has put the informed buyer (such as yourself) in the position where you need to independently "conclude" whether it's fair or not. No matter what we all think about the P4 2.2A, we all conclude unanimously that it actually runs at ~2.2Ghz.

      Even someone like you who is informed and thinks highly of AMD CPUs have confused the PR Rating as a "Pentium Rating" -- it's actually (supposedly) a benchmark comparison with a 1Ghz K7 chip, not a Pentium 4.

      In practice though, AMD bumps up 66Mhz and adds 100 PR points every time. As you point out, everytime they do this, their lead at a particular "rating" becomes narrower over Intel. If I was them, I'd be very worried about the perception that they over-speced the PR numbers -- if the "2500+" chip benchmarks slower than a P4 2.5Ghz, they are going to be blasted to high heaven -- even it's supposedly not a directly comparsion.

      The other issue is that AMD is trying to make inroads into the server and workstation markets, and it's really questionable if "PR" ratings are needed there.

      --
      Whenever I hear the word 'Innovation', I reach for my pistol.
    2. Re:PR Rating Stupidity by elflord · · Score: 2
      Intel funded FUD or not, the thrust of the report is because the PR ratings are based on pseudo-objective measurements, they are ultimately confusing to buyers.

      Mhz ratings are not only confusing, they are misleading.

      Mhz might be a very poor buying consideration, but at least it's an objective number, unlike AMD's rating system.

      AMD no doubt also have an objective formula that they use to acquire their PR rating. It's just a different one from the Mhz rating. Since Joe Sixpack doesn't really understand Mhz or AMDs rating system, both are equally arbitrary.

      Thus AMD has put the informed buyer (such as yourself) in the position where you need to independently "conclude" whether it's fair or not.

      No, he doesn't. The industry did most of the concluding for him. If the PR numbers were not fair, the press would have been howling about them.

      If I was them, I'd be very worried about the perception that they over-speced the PR numbers -- if the "2500+" chip benchmarks slower than a P4 2.5Ghz, they are going to be blasted to high heaven -- even it's supposedly not a directly comparsion.

      That's a risk that needs to be weighed against a policy of not using PR numbers.

    3. Re:PR Rating Stupidity by AntiNorm · · Score: 2

      In practice though, AMD bumps up 66Mhz and adds 100 PR points every time

      In other words, they lie.

      This is why I absolutely hate PR rating schemes. They are arbitrarily set by the chip's manufacturer. Although they usually set them to what they deem a "fair" rating, they often bump the ratings up like this.

      I'm a junior studying electrical engineering, and I'm taking a processor architecture class this semester. So I know about the design issues that lead to the perceived need for PR ratings. But that doesn't bypass the fact that PR ratings sell processors as things that they are not. No, AMD isn't marketing their Athlon 2000+ as a 2000 MHz chip, but many computer stores do sell them that way (I have seen this personally, so yes it does happen). You don't help your customers by lying to them.

      Why is it not reasonable to *gasp* expect consumers to have enough smarts to realize that processors made by one company will not perform the same as those made by another company? Just sell the XP2000+ processors as 1600 MHz chips (or whatever the hell they run at), and say that they are "roughly equivalent to 2000 MHz Pentium 3." Heck, this way, customers would start to realize on their own that AMD processors are better. But using misleading PR ratings isn't going to help AMD one bit.

      Lest you think I'm just bashing AMD, let me repeat my point that AMD processors are indeed better. My current system is a 1.2 GHz Thunderbird (sold as 1.2 GHz, not some stupid bloated PR number) overclocked to 1.4 GHz. According to SiSoft Sandra, its PR is 1875. But I would have been very pissed if I was being sold a 1.9 GHz processor and found out that it only ran at 1.4 GHz.

      --

      I pledge allegiance to the flag...
      of the Corporate States of America...
    4. Re:PR Rating Stupidity by NutscrapeSucks · · Score: 2

      Mhz ratings are not only confusing, they are misleading.

      Actually, what I would argue is misleading is the entire way that computers are sold to the Home/SOHO "Joe Sixpack" market. Wrapping up a "2000+" or "2.0 Ghz" CPU with cheap components, lowspec memory, and some doodads and marketing it as a high end system is the real point of confusion. I think we all know that a much lower-clocked system could beat most of the stuff you find at retail. Both AMD and Intel are playing that game rather than trying to improve the situation.

      For the corporate markets however, Mhz isn't as imporant as everyone's making out, and that's where AMD really needs to grow. Yet their PR scheme is causing some level of confusion and distrust among semi-informed customers. As you point out, it's risky marketing.

      --
      Whenever I hear the word 'Innovation', I reach for my pistol.
    5. Re:PR Rating Stupidity by Courageous · · Score: 3, Interesting

      Mhz ratings are not only confusing, they are misleading.

      Not only are you correct, but I should like to point out that there are large numbers of average joes who don't even know what a megahurtz rating means. To them, it really isn't anything concreate or objective, it's just a number. If it were implicitly communicated to them that this rating was a measurment of speed, and then they bought a computer which had a higher mhz than another computer only to later see this computer perform more slowly than the other, they would feel deceived. Or at least stupid.

      C//

    6. Re:PR Rating Stupidity by dhogaza · · Score: 2
      Mhz might be a very poor buying consideration, but at least it's an objective number, unlike AMD's rating system.

      I know! Let's just use the weight of the chip! That's an objective number! "Athlon 1.1 Gram" etc.

      It's just about as meaningful as MHz comparisions between unrelated processor architectures ...

    7. Re:PR Rating Stupidity by psamuels · · Score: 2
      No, AMD isn't marketing their Athlon 2000+ as a 2000 MHz chip, but many computer stores do sell them that way (I have seen this personally, so yes it does happen). You don't help your customers by lying to them.

      OK then, whine at the computer stores. You said it yourself - AMD is not trying to tell you it's a 2000 MHz chip. They are trying to tell you it runs at least as fast as a 2000 MHz chip from another vendor.

      According to SiSoft Sandra, its PR is 1875. But I would have been very pissed if I was being sold a 1.9 GHz processor and found out that it only ran at 1.4 GHz.

      Assume for a moment that you have no way to measure the actual GHz of a processor. Why would you care about the GHz number anyway? It's just a number. Do you have any idea how many factors go into the speed of a system besides the clock rate of the CPU pipeline? If you see a bunch of CPUs on a shelf, labeled "1400", "1500", "1900" - why does it matter if those are GHz or some other rating system determined by the manufacturer?

      While you're at it, why don't you whine about Intel selling chips clocked at 600 MHz but "forgetting" to tell you that the on-chip L2 cache only runs at 300 MHz? Isn't that equally deceptive? Or, from another viewpoint, equally irrelevent?

      --
      "How can you claim that you are anti-crack, while still writing a window manager?" — Metacity README
    8. Re:PR Rating Stupidity by AntiNorm · · Score: 2

      If you see a bunch of CPUs on a shelf, labeled "1400", "1500", "1900" - why does it matter if those are GHz or some other rating system determined by the manufacturer?

      Because customers assume that all manufacturers use the same system (which, for clarity, they should). They assume AMD uses the commonplace MHz rating scheme, but AMD instead uses a misleading PR scheme.

      --

      I pledge allegiance to the flag...
      of the Corporate States of America...
    9. Re:PR Rating Stupidity by AntiNorm · · Score: 2

      Do you believe Red Hat Linux 7.2 is over twice as advanced as the (not yet released) Debian Linux 3.0? - Given RootHat's reputation for security, Debian is easily more advanced.

      Which has better acceleration, an 800-cc touring bike or a 600-cc racing bike? - Depends on what kind of shape the riders of each are in.

      Which Ethernet card is faster, a 3Com 905C or a Realtek 8139? - Seeing how I have a 3C905B, 3Com cards are probably faster.

      How about PC266 DDR-SDRAM versus PC600 RDRAM? - I'd answer this, but Rambus would sue me.

      Do you believe a 15-inch CRT is bigger than a 14-inch LCD - If you're talking in terms of volume, any CRT is "bigger" than any LCD.

      --

      I pledge allegiance to the flag...
      of the Corporate States of America...
    10. Re:PR Rating Stupidity by elflord · · Score: 2
      Because customers assume that all manufacturers use the same system (which, for clarity, they should).

      And what system should that be ? Mhz on an AMD CPU are not "the same" as Mhz on an intel CPU. This is precisely the problem.

    11. Re:PR Rating Stupidity by elflord · · Score: 2
      Wrapping up a "2000+" or "2.0 Ghz" CPU with cheap components, lowspec memory, and some doodads and marketing it as a high end system is the real point of confusion.

      AMD and intel build CPUs, not systems.

      I think we all know that a much lower-clocked system could beat most of the stuff you find at retail.

      Depends on what you're doing with it. Most home users just need a lot of memory and a reasonable amount of disk space.

      As you point out, it's risky marketing

      I said something slightly different. I said that you need to compare the risks of using PR numbers with the risks of not using them.

  4. I have no sympathy for Intel by MtViewGuy · · Score: 3, Insightful

    I really have to shake my head in amazement that Intel of all things would do such a report in the first place.

    People already know that thanks to the vastly more modern CPU core, the AMD Athlon CPU core on a true per MHz basis is way faster than any Intel CPU. The proof of the pudding is this: the current AMD Athlon XP 2100+ running at 1,733 MHz actually out-performs the Pentium 4 running at 2,200 MHz on several benchmark tests, and of course the AMD CPU is quite a bit less expensive, too.

    I think the report was done as a pre-emptive strike against the upcoming AMD Thoroughbred CPU's, which should be out very soon.

    1. Re:I have no sympathy for Intel by TheViffer · · Score: 2, Insightful

      "People already know that thanks to the vastly more modern CPU core, the AMD Athlon CPU core on a true per MHz basis is way faster than any Intel CPU."

      I would like to inject "Technical" in the beginning of your statement. You and I might know.

      You ask the general John Doe which is faster, and AMD 1900 or an Intel 2000 and they will answer more times then not the Intel is. Most others would ask whether Dell or Gateway makes them.

      Another example (older, but still) an Intel 486 DX4/100 or a Pentium 60?

      So when reports like this come out, people do believe them.

      --
      -- Knowing too much can get you killed, but knowing who knows too much can make you rich.
    2. Re:I have no sympathy for Intel by Anonymous Coward · · Score: 2, Informative

      I wouldn't really say that AMDs core is "vastly more modern". BOTH are very modern. In fact, architecture-wise, Intel's is more modern. It has trace caches, better branch prediction, etc. AMD on the other hand has continued just making bigger as better. They show that this is working though.

      The two processors are built on a different (micro)instruction set. AMD's micro-ops lead to a lower CPI (cycles per instruction) than Intel's. This is why they introduced this whole rating system.

    3. Re:I have no sympathy for Intel by Shadow99_1 · · Score: 2

      You were actually shocked by this? I switched to AMD years ago when Intel first started buying off reviewers, reporters, & analysts to preach their gospel of Intel superiority to AMD...

      In some things they were right way back when (K6 days, though the K6 made a much much better bussiness or light server system). But they've kept up regardless of whether they are actually right or not...

      --
      we are all invisible unless we choose otherwise
    4. Re:I have no sympathy for Intel by Peyna · · Score: 2

      They need the detective from Conan O'Brien who actually finds the proof in the pudding.

      --
      What?
    5. Re:I have no sympathy for Intel by MtViewGuy · · Score: 2

      However, the AMD K6 CPU's were hampered by the limitations of the Socket 7 design and the fact that the FPU unit on the K6 wasn't really that great.

      Because the Athlon borrowed a lot of technology from DEC (specifically the very fast EV6 CPU bus), the result was a vastly superior CPU. I still am impressed by the fact that except for programs that really take advantage of Intel's SSE2 extensions, the current Athlon XP CPU's are more than competitive with the Pentium 4.

      I'm going to watch with interest what AMD does with the new 0.13 micron process Thoroughbred Athlon CPU's. Don't be surprised that AMD does incorporate an on-die L2 cache of 512 KB eventually, just like what Intel did with their current 0.13 micron process Northwood Pentium 4's.

  5. Sadly, this is like by prisoner · · Score: 2, Insightful

    any episode of "Law and Order" or any other court show - once the horse has left the barn it's too late to all but the most informed. "So, Mr. defendant, you remember trying to stuff an Intel PentiumPro up his butt!!" Objection!! but it's too late. The Jury has already heard it. This report is no different. You will read about how bogus this report may/may not be somewhere on the web but I'll hear from my customers that they saw a report saying that AMD chips are slow/prone to failure/catch on fire/whatever.

  6. AMD's problem lies in the chipsets, not the CPUs by Anonymous Coward · · Score: 2, Informative

    Everyone who tried an Athlon can confirm it's superiority to Intel's model line (even with AMD's stupid numbering), but the point is, the chipsets for Athlons are mainly crap. All AMD Athlon chipsets were fine, but most boards out there are sold with VIA chipsets which lead to lots of problems. Lots of people tell me they have problems and don't want any more Athlons, and don't realize at first that their problems were all related to the chipset. The same goes for notebooks. Intel has a good chipset solution, Amd doesn't.

    So if anyone at AMD reads this: PLEASE MAKE SOME CHIPSETS, and I promise you, you'll sell more Athlons.

  7. I can vouch for the numbers AMD uses by Geek+In+Training · · Score: 3, Interesting

    Personally, I've been running an Athlon XP 1600+ (1400MHz) since the month the processor was released. It spanks my friend's P4 1.7GHz hands down, both in the "gaming benchmark" department, as well as the "look and feel" of the system during use. One unfair advantage I have, though, is that my system was built with 512 megs of DDR RAM, and he has the same amount in PC133. DDR support for the P4 is a "recent" development compared with the Athlon platform.

    I mean, let's face it... if you're building a system (which I'm sure many of us here do), how can you beat a $52 ECS K7S5A from NewEgg, coupled with a $120 Athlon XP 1700+ processor (boxed with heatsink and 3 year warranty), versus $100 for a P4 mobo and $165 for the processor? Even the MHz disparity between the rating and the actual clock is lost in price/performance comparisons.

    The only people buying Intel are big OEMs and end users who still haven't given up the idea that AMD is an "incompatible clone processor." (Yes, some of these clueless folks still exist, brainwashed by marketeers during the K5 days.)

    Intel is clearly running scared on the news that AMD has taken nearly thirty percent of the desktop x86 processor sales market. Their monopoly is in jeopardy; so quick! let's buy some negative press for the competition.

    (Full disclosure: I own stock in neither company, and run both platforms at home: AMD and Intel.)

    --
    SlashSigTheorem: Humorous, Political, Critical, Constructive- If you have a .sig, someone WILL complai
    1. Re:I can vouch for the numbers AMD uses by Citizen+of+Earth · · Score: 2, Insightful

      Intel is clearly running scared on the news that AMD has taken nearly thirty percent of the desktop x86 processor sales market. Their monopoly is in jeopardy; so quick! let's buy some negative press for the competition.

      If AMD's share is really thirty percent, then you may need to stop calling Intel a monopoly. Buying negative press also tends to blow up in your face.

      (Full disclosure: I may own small amounts of stock in either or both companies; I don't really know.)

    2. Re:I can vouch for the numbers AMD uses by Geek+In+Training · · Score: 2

      Thirty percent ? Maybe I'm living in a small, radically different world, but Intel owns more like 98% of the business market, and 2% of the home market (yes, I pulled that out of my ass). Everyone I know runs Athlons and Durons. Nobody's crazy enough to pay 3x the price for an Intel chip that ultimately does the same job, plus or minus 5% in terms of performance. The only people who have Intel cpus, have Celerons, and they bought them at Future Shop or WalMart or some other twit store.

      AMD's press release describing sales last quarter showed that they had 28% of the shipped processors for desktop PCs.

      This is, of course, because a good majority of store-bought PCs are still Intel, and a good portion of all processors shipped still go into store-bought systems.

      You and I may build systems, but most people don't. At least for now. :)

      --
      SlashSigTheorem: Humorous, Political, Critical, Constructive- If you have a .sig, someone WILL complai
    3. Re:I can vouch for the numbers AMD uses by Shadow99_1 · · Score: 2

      Well I can testify (& so could some of the network or system admins I know online) that the AMD dual cpu boards are pretty solid... Tyan's boards are still the most server oriented & still the best choice for a AMD server system...

      Heck one system admin I know uses AMD dual cpu systems in his companies render farm...

      --
      we are all invisible unless we choose otherwise
    4. Re:I can vouch for the numbers AMD uses by mrm677 · · Score: 2, Informative

      Why do Slashdot moderators label any message describing a problem with an AMD Athlon as a "Troll"?

      This website is not inpartial.

      I feel the same way about Athlons and so do most businesses I work with.

      I own 2 machines. One is a 900 MHz Athlon with a K7S5A Motherboard. The other is a PIII 866MHz. They both run Linux. The PIII has *never* crashed on me. The Athlon hard-freezes every month or so. I've got a quality power supply in both machines.

      Furthermore, any price difference I paid between the PIII and Athlon will be made up for 3 years from the extra electricity that the Athlon draws (75 watts compared to 30 watts).

    5. Re:I can vouch for the numbers AMD uses by Steveftoth · · Score: 2, Insightful

      1 out of three processors in use is not AMD, but for recent quarters, of the new processors shipped, 30% of desktop PC procs were amd.

  8. Re:Money is everything by jamesidm · · Score: 3, Interesting

    and gartner still recommended that people ditch IIS for apache... damn IIS must really suck!

  9. Re:At least AMD publishes benchmarks... by ShadeEagle · · Score: 2, Funny

    But when you looked closley.. you noticed that Intel benchmarks the pentiums AGAINST THEMSELVES... the P4's on the bar chart were rated very high. Against the pIII.

    (Spelling and grammar aside)

    Pentium 4s are better than Pentium 3s?

    Wow. I'd have never guessed that.

    Thanks for opening my eyes, Intel.

  10. Missing the point by CaptainAlbert · · Score: 5, Interesting

    AMD and Intel can argue for as long as they like about whose benchmarks are rigged, but it doesn't change the fact that, in the end, they are just that - benchmarks. They bear absolutely no resemblence to real life performance whatsoever. In the end, it doesn't matter what the graphs say or who claims to be faster that whom.

    If you're going to start sueing people for misleading the public into buying products by presenting them with misleading data, then any hardware or software vendor who uses a benchmark in their marketing literature should be prosecuted.

    The hierarchy is thus: lies, damned lies, statistics... benchmarks. :)

    --
    These sigs are more interesting tha
    1. Re:Missing the point by larien · · Score: 4, Informative
      Benchmarks prove whose processor is the fastest at running benchmarks...

      That said, a well written benchmark can give a guide to relative performance, and it's hard to argue that a quake 3 benchmark isn't measuring "real world" performance in 3D gaming (although the incident with ATi was a bit of an embarressment).

    2. Re:Missing the point by Geek+In+Training · · Score: 5, Insightful

      The hierarchy is thus: lies, damned lies, statistics... benchmarks.

      This is true for proprietary benchmarks run by companies against their own products.

      But for benchmarking apps developed by third parties and used by fourth parties to compare and review hardware, I don't think this rings true. Things like Q3bench (which checks real-world performance by running timedemos) and MadOnion 3DMark (which tests graphics capabilities and performance in various areas) are very handy for testing video cards by review sites.

      I mean, a lot of people have used Prime95 and RC5-64 clients to review processors over the past four years, since they are so CPU-intensive. (Er, they take 100% of available CPU cycles.) Therefore, you can judge how well certain processors can handle certain types of operations by seeing how many blocks they can crunch in an hour.

      The problem is that certain apps are going to run better on certain processors because of a harmony between the processor design and the heavily-used commands in the app. Like the fact that a G4 (with Velocity Engine! er, AltiVec unit)will totally spank a P4 twice its clockspeed in RC5.

      So the *good* reviewers out there run a battery of tests, including graphics, processor-intensive apps, memory-intesive apps, etc. to get a good, holistic representation of performance. They can then replicate that battery of tests on other hardware to compare performance with a reasonable degree of accuracy.

      If a company says, "We used our own IntelMark tests to determine that we are the fastest processor ever," that's marketing crap. If [H]ardOCP says "We ran the P4 and the Athlon XP though 58 tests developed by third parties, and here are the results:" ... I think you can use those numbers for educating yourself before making a purchase with some degree of confidence.

      --
      SlashSigTheorem: Humorous, Political, Critical, Constructive- If you have a .sig, someone WILL complai
    3. Re:Missing the point by sql*kitten · · Score: 2

      AMD and Intel can argue for as long as they like about whose benchmarks are rigged, but it doesn't change the fact that, in the end, they are just that - benchmarks. They bear absolutely no resemblence to real life performance whatsoever. In the end, it doesn't matter what the graphs say or who claims to be faster that whom.

      Indeed. If you ever are buying any high-end hardware, you will typically get competing vendors to participate in a bake-off. They will both make hardware comparable to what you want to buy available (possibly they will lend it to you, more likely they will invite you on site or to send them your binaries and some instructions) and then you compare them for exactly what you want to do. Benchmarks are good for marketing headlines to establish that the vendor is in the ballpark, but no-one would make a purchasing decision based on them alone.

    4. Re:Missing the point by Peyna · · Score: 2

      honk if you drive peterbilt

      --
      What?
    5. Re:Missing the point by Dr.+Spork · · Score: 2
      Not quite right; you just need to read the reports right. For example, Kernel compile times are not a sythetic benchmark. Encoding a 10-minute .wav file into .mp3 with LAME is not a sythetic benchmark. Neither is the encoding time for converting a MPEG-2 movie to DivX5. These are all things that many of us actually do on our computers, and sit there waiting for them to finish.

      Sure, there are absolutely meaningless benchmarks, like whether you can get 181 or 197 FPS in your Quake3. Even good monitors cannot refresh faster than 150 times per second, so this really is beside the point. But it's not quite fair to act like these online speed tests don't teach us anything relevant to normal use of our machine.

  11. JUST OUT, GameGuru artical funded by ID by Neck_of_the_Woods · · Score: 3, Funny

    Seems that the guys over at ID software have been the paying Gamespot to benchmark Quake and Unreal.

    "It seems they have tained the pure nature of our business by funding this research into frag count. It is just, low down and dirty" said on game that refused to be identified. This is the latests in a long string of rumors about funding benchmarking test by game companies.

    The issue at heart is frag count, the dismemberment of your pray or enemy in the 3d first person shooters. "Dude, just because that artical had some lame ass gimps playing the tester and he was able to blast some ass chunks all down the air duct does not mean that that aging Hexen is a better frag fest than Quake. I got some guys at work that can't strife, it is like taking candy from a baby." spat G-spotkilla from his cubical at a trendy NY base marketing company.

    Probing for the female veiw I asked G-spotkilla's cube mate, code name HelloKitty her view on this whole thing "You know, G-spotkills is just a little gimp. He could not hit you with a sniper rifle at 30 feet let alone a g-spot!". Well it turns out she had not read the artical but she was hot, so I printed her concerns.

    It seems no matter what people just don't believe the media anymore. G-spotkilla was last heard running down the hall screaming something about toenail polish and gravity problems that "Just don't work like that man!"

    --
    Neck_of_the_Woods
    #/usr/local/surf/glassy/overhead
  12. lalalala by loraksus · · Score: 2

    If this were on fark.com, it would have an obvious tag.
    I suppose if your more expensive, inferior product can't compete 1:1 with its competitor, you have to resort to something like this.

    Although this appears to be a flamebait (intel's move, and yes, to an extent, my article), I think that the intel move is fairly irrelevant considering intel has a crapload of the market (i.e. OEM, businesses, etc) and it doesn't look like HPaq / IBM, etc will be switching to AMD.

    Tho I have one thing positive to say about the p4, small chip, big ass heat sink, tres cool. If intel wants to increase its market share into the
    "geek" community, sell a 4 lb copper heatsink w/ a window / light kit mounted on the chip :)
    of copper on em, along with a window kit

    --
    1q2w3e4r5t6y7u8i9o0pqawsedrftgthyjukilo;p'azsxdcfv gbhnjmk,l.;/
  13. HardOCP by rosewood · · Score: 4, Interesting

    Since I can not link directly to this article I will quote Kyle from HardOCP.com - and as of 8:18 CST March 28th, this can still be found on the Front Page of www.hardocp.com.

    I just off the phone with the fine folks over at AMD and was discussing the issues over the Aberdeen Group white paper. Aberdeen, if you are unfamiliar with them, claims to be a Market Analysis company. If this is all new to you, please visit the InqWell as well as ZDNet on this issue.

    There are two situations in this issue that are fun to look at. If you go read the white paper entitled AMD's Gigahertz Equivalency: Inexperienced Buyers Accept Bad Science, published here (and you will have to sign up) you will notice that Aberdeen uses flawed logic to pick on AMD's model numbering system of their CPUs.

    Nevertheless, Advanced Micro Devices (AMD) last year deliberately took a step down a slippery slope of bad science when it named its Athlon XP line of microprocessor models with clock-speed gigahertz ratings equivalent to Intel's competing Pentium 4 (P4), based on a set of application
    benchmarks audited by Arthur Andersen and fully described in AMD vs. Intel comparisons at AMD's Web site.

    And then..

    What's the flaw in AMD's equivalency ratings? There are many discussed in this Aberdeen Executive White Paper. The key flaw is that the equivalency rating is a snapshot in a moment in time -- and time surely marches on in the computer industry -- making the gigahertz equivalency subject to increasing variance over time. For example, the AMD Athlon XP 2000+ processor announced last fall runs at 1.667 GHz. The 2000+ equivalency rating is aimed at Intel's P4 2.0 GHz Willamette processor.

    Aberdeen seems clueless that the basis for AMD's model numbering system is a comparison to their own TBird core CPUs and the speed they would have to run to be equivalent to a Palomino core CPU in performance. Seems as though Aberdeen did not even contact AMD in order to better understand the exact subject they were commenting on.

    The other part of this situation is this. It is now being rumored that Intel paid for the white paper.

    But the INQUIRER learned from Intel this morning that it paid for the report to be written, which certainly puts a different complexion on the thrust of the piece. Intel maintains, however, that fact doesn't affect the objectivity of the Aberdeen Group's findings. Cough.

    While I have no idea of the validity of this claim, I will tell you this. I think of all of these "market analysis" companies as no more than paid mouthpieces of the hardware industry. Some are scumbags that make a living off taking a product and making it look good to distributors and consumers. They are spinmeisters looking for a buck and will spin their "truths" to support their clients needs. If you think market analysis companies are in this hardware industry to make sure that you, the consumer, get the truth, you are sadly mistaken. Is this to say all anylysts bad and are always wrong? Of course not, but I give them about as much credibility as a 4th grader with a Geocities site. At least the 4th grader most likely has purer motives.

    I think it was one of these industry analysts that referred to sites such as our own as "homebrewed" and that we bascially did not deserve the voice that we have in the hardware community. I guess even we piss off the analysts when we uncover the truth that does not agree with their spin.

    Anyway, this is all my opinion and subject to just flat being wrong but there is one thing I will tell you for sure and that is that the hardware industry has a nasty underbelly just about like every other industry in this world.

    UPDATE: From the cards and letters we have gotten on this subject everyone seems to be missing the point of my little diatribe posted above. The rating methodology wars are over in my mind, and have been for a long time now as Aberdeen is way late to this party. The opinion I want you know about analyst companies is that they are simply all bought and paid for and expected to spin the agenda of their client.

    Also, Intel did share with us tonight that they did finance the Aberdeen research into the AMD rating system.

    As long as you guys are smart enough to form your own opinions and thoughts, which most of your are, just make sure you don't let these "analyst" companies shape your opinions as some are nothing more than a PR company that runs a couple of benchmarks. In this case Aberdeen based their entire opinion on BABPCo Sysmark 2001 and Quake III numbers.

    You guys would hunt me down and whip my ass if I ever gave you a review based on that little data.

    1. Re:HardOCP by FredGray · · Score: 2
      based on a set of application benchmarks audited by Arthur Andersen

      Does this strike anyone as a funny thing to advertise?

    2. Re:HardOCP by jafuser · · Score: 2

      Why does anyone even trust Aberdeen reports? They're just a marketing company. You pay them money and then they write you a favorable report in proportion to the amount of money you give them. So who reads this crap anyway?

      --
      Please consider making an automatic monthly recurring donation to the EFF
  14. Re:MB bug by 1010011010 · · Score: 2

    Of course, for us unlucky sods that own a compaq presario system, there's nothing but the same old crippled BIOS the machine came with. Maybe -- MAYBE a single, years-old update to a slightly newer, but still crippled, BIOS revision.

    --
    Napster-to-go says "Fill and refill your compatible MP3 player", which is a lie. It's not MP3. It's WMA with DRM.
  15. Intel Funds AMD-bashing Robot by Hnice · · Score: 5, Funny

    In my early-morning haze, that's how this headline reached my cortex. You can imagine how disappointed I am right now.

    --

    god is just pretend.

  16. TradeOffs between Intel and AMD Cpu by cOdEgUru · · Score: 3, Informative

    Intel :

    Pros :

    Stability - Rip out the CPU fan, these would still run till kingdom come.
    Heat Dissipation - As explained above, its above par than AMD cpus
    Research - Constantly comes up with new technology. For e.g. AGP Pro and improvements to Chipset comes to mind.

    Cons :

    FUD - Like to propogate FUD about competitors. Hence I have no sympathy towards them when they cry wolf at Microsoft.
    Speed - If you look beyond the constant Mhz bumping is what they all been doing..

    AMD - The Underdogs (Obviously a Slashdot fave because of the same fact :) )

    Pros :

    Speed - Raw RAW SPEED!!!.. Enough said. Whoops Intels ass on a wide range of benchmarks.

    Cons :

    Stability - Needs improvement. But then again, if you have a decent CPU fan and if you are not too keen on Overclocking, then you are good.

    Chipset Issues - Quite obvious. AMD needs to improve on this.

    Heat Dissipation - Stories about guys making scrambled egg on the CPU are not exaggerated.

    1. Re:TradeOffs between Intel and AMD Cpu by BlackSol · · Score: 5, Insightful

      You missed the biggest point: Cost/performance.

      AMD chips have been shown over and over again to provide greater performance at less cost than Intel.

      --
      $sig=$1 if($brain =~ /idea\s+(.*)/i);
    2. Re:TradeOffs between Intel and AMD Cpu by Sabalon · · Score: 2

      Speed - Raw RAW SPEED!!!.. Enough said. Whoops Intels ass on a wide range of benchmarks

      Yup...and when I need a machine for benchmarks, I'll go AMD :)

      But beyond benchmarks, looking more at real-world uses, off the top of my head you have
      Flasking a DVD
      MP3 Encoding
      Lightwave
      3DS Max

      Right now, most benchmarks put AMD ahead in the MP3 and 3DSMax render/encode times. The P4's are ahead in the LW and DVD times - because those apps have been written/optimized for the P4.

      I'm not sure if 3dsmax 4.2 w/ performance pack (ie - p4 optimizations) will push that in Intel favor. And I'm betting that more and more stuff will start coming out "Intel Optimized" (gee...a new logo for boxes?)

      For the average end user who just wants a computer to e-mail, play games, etc... AMD is much better bang for the buck.

    3. Re:TradeOffs between Intel and AMD Cpu by Shadow99_1 · · Score: 2

      If AMD made most of their own chipsets for their cpu's then you could ciritize their chipset issues... But they don't 3rd parties make their own athlon/DUron supporting chipsets based on specs AMD gives them... If they don't live up to those specs then AMD isn't at fault. AMD's own chipsets have been very stable overall with less erratia than Intel's average chipsets...

      As for Intel's 'R&D'... LOL, Intel has been lossing ground in the only way we have of evaluating this.... AMD has outpaced them in this area consistantly for the last 4 years now! Not to mention AMD's open standards (such as 3dnow!) compared to Intel's restricted 'standards' (such as SSE)... There are more examples, but please... This being listed as a positive aspect of Intel is laughable...

      & please, please, stop spreading that FUD about AMD chips running so hot that it can't loose it's HSF or it will just instantly die is such complete & utter crap... It just needs to die... I have (more than once) accidently not had my fan powered up for a number of reasons (like forgetting to reconnect the power cable to it, etc. during an upgrade). Has my cpu died? No. Sure in my case I had a heatsink on it, but please we haven't been able to not have fans on cpu's since the early 486 days... I've started up my Athlon system, booted the OS, proceeded to use my PC for hours, & even played UT! with out my fan running... Eventually playing UT (not anything else) caused a bios screen to pop-up stating the cpu was exceeding it's maximum temp specified in bios & the system would now shutdown...

      Please reasearch before posting...

      --
      we are all invisible unless we choose otherwise
    4. Re:TradeOffs between Intel and AMD Cpu by Shadow99_1 · · Score: 2

      Lightwave used to be an AMD benchmark til Intel funded their 'development' of 'optimizations'... Flask with optimized executables for both cpu's still shows AMD trailing by only a couple points, with non-optimized executables the Athlon wins...

      Intel is just realizing that they can fund their way into supremecy by heavy optimization for their systems alone...

      AMD is still the champ for power users as well... I know an entire forum of people with OC'ed Athlon's competing to see who can get their system running the fastest... a Athlon XP @ 2 Ghz (not to uncommon) can beat an OCed P4 Northwood @ 2.6 Ghz (somewhat uncommon) in almsot all benches...

      --
      we are all invisible unless we choose otherwise
    5. Re:TradeOffs between Intel and AMD Cpu by Hamshrew · · Score: 2, Interesting

      It may be unimportant for YOU, but for some, it does matter. My server is in a seperate room, and I care little enough about noise that I haven't even put the cover back on from the latest hardware upgrade. Even with the cover on, my longest uptime was about 20 days... and would be longer, if I didn't turn it off for out of town trips.

      I don't know what you're doing wrong, since I haven't had any problems with either of my machines. Maybe it's your motherboard or memory.

      FWIW, I run an 850 Athlon Classic as my server, and a dual MP 1800+ for my workstation, and I've only had stability problems in Windows(from flaky video drivers). I also work with a cluster of 40 Dual Athlons(mixed 1.2 and 1800+), and the only failure I've seen is a bad Myrinet card. Though the room is noisy, each individual machine is fairly quiet.

      --
      - Free tabletop fantasy gaming! Grey Lotus
    6. Re:TradeOffs between Intel and AMD Cpu by Steveftoth · · Score: 2, Insightful

      This is not true anymore. The only reason that was true was at that point in time Intel was able to make the top speed procs in large quantity. However, the demand for low speed procs was still high, so they just sold procs that could run much faster at a lower speed. However, you never knew which procs could be overclocked safely.
      Why did they do this? Money. They could make more money selling 'slower' chips to people at a slightly reduced cost because of volume.

    7. Re:TradeOffs between Intel and AMD Cpu by BlackSol · · Score: 2

      Yes you are sorta of right.
      40 watt draw difference right:

      Watts * hours * days / kilo
      40W * 24 * 365 / 1000 = 350.4 KwH
      at 6 cents / KwH = $21.02
      at 8 cents / KwH = $28.03

      so if you keep the machine running for a full year, non stop it costs you around $25 more. So if a Athlon is $50 less you can run it for 2 years straight before it costs you more. That is assuming the same $$$ for the motherboard.

      But then you could also look at investing that $50 or something ;)

      Also this assums that the chip pulls full wattage all the time which it doesn't.

      So I'll keep buying a power hungry athlon and enjoy the extra speed and knowing I'm funding the underdog.

      --
      $sig=$1 if($brain =~ /idea\s+(.*)/i);
    8. Re:TradeOffs between Intel and AMD Cpu by Sabalon · · Score: 2

      The question is - how much optimization can Intel force down everyones throats?

      If everything is eventually Intel optimized, then the fact that AMD wins with non-optimized becomes a non-point.

      But one thing you said brings up a good point:
      shows AMD trailing by only a couple points

      Most of the graphs may show bars for AMD being twice as big as Intel or vice-versa. However, a lot of the benchmarks, the graphs may cover a rang of 10 points like from 270-280, with Intel at 271 and AMD at 279. So an 8 point difference looks huge.

      I dunno...I'm sticking wtih my PII for now :)

    9. Re:TradeOffs between Intel and AMD Cpu by RelliK · · Score: 2
      Stability - Rip out the CPU fan, these would still run till kingdom come.

      This is the biggest pile of shit ever to come out of the Intel fanboys. Let's get the story right: Intel CPUs cannot run without a CPU & heat sink. If you are so sure that it will, why don't you try it on your pentium 4?

      Now I want to preempt replies from morons who will point out the Tom's video. I saw it. The heat sink and fan were removed for 2 seconds and subsequently put back. There is simply no way you can run pentium 4 without HS & fan for an extended period of time.

      Speaking of which, I do not understand Tom's point. Heat sinks & fans do not spontaneously "fall off". But that's anoter rant altogether...

      --
      ___
      If you think big enough, you'll never have to do it.
    10. Re:TradeOffs between Intel and AMD Cpu by Gridle · · Score: 2

      You're probably just thinking of the Tom's Hardware video, which only demonstrates that the Thunderbirds and the earliest Athlon 4's don't have proper overheating control without special support from the motherboard. The heat dissipation issue is just a myth. A P3/P4 of equivalent performance to an Athlon (TB or XP) will produce about the same amount of heat.

      Check the chip specs at Intel's and AMD's web site, if you don't believe.

      Also, if the fan dies, there is more than enough time for the motherboard or even a temperature monitor program to realize the situation and shut down before it's too late. I've personally stopped the CPU fan on my TB-1333 for up to 15 seconds and the temperature didn't rise more than a few degrees C, still well below the safety limits. Additionally, a P3 would *not* happily run until the end of the world if you ripped out the fan, but it would probably graciously freeze rather than overheat.

  17. the real unbiased benchmarks by Gary+Yngve · · Score: 5, Informative

    SPEC

    see the 1st quarter 2002 results for CPU2000

  18. Real world comparison by olympus_coder · · Score: 5, Informative

    We use dual processor machines to run simulations (particle physics). We have 3 dual 1.7gig Xeon/RDRAM setups and several 1800+ MP/DDR setups. The 1800+ setups will complete the same amount of work as the xeons in 75% of the time! I thought they were better, but I didn't think they were that much better. That is a 1.53gig machine completeing the same work as a 1.7 gig machine (with faster memmory) in 75% of the time.

    Our application, as you can imagine, is very floating point intensive.

    --
    Spell check? Why bother. That is what grammer/spelling Nazi freaks who waiste band width posting "spell right" are for.
    1. Re:Real world comparison by Sycraft-fu · · Score: 2

      The only thing I would ask is about optimisation. What compiler did you use? Any hand assembly optimisation? Now I realise that in your line of work you may have a certian compiler that is necessary to use and hand optimisation may not be feasable, but I've seen results (with video encoding) where a P4 1.4ghz was initally slower than a P3 1ghz, running at around half the speed. After just a recompile the P4 was around twice as fast and with SSE2 hand optimization got to be like 6 times as fast.

  19. Re:Original report by AVee · · Score: 2, Informative

    In order to read this document, you must be registered with Aberdeen.com. By accessing this publication, you agree to let Aberdeen share registration details with sponsors of the document. This enables Aberdeen to bring you this research at no charge.

    Not only does Intel spread FUD, they also want to know who read it...

    this might get you the report without signing in...

  20. CPU Benchmarks mean nothing by BWJones · · Score: 2, Flamebait

    I use Athalons, Pentiums, MIPS and PowerPC machines routinely and all these CPU benchmarks being pushed around mean absolutely nothing except in direct comparison to other CPU's in identical motherboards with identical RAM, hard drives, bus speeds etc etc etc... with overall performance depending upon RAM controllers, amount of cache and its integration and control, and OS latency among other reasons. For instance, if one were to examine the bandwidth of the different bus designs one would see that Athalon XP's with a 200Mhz bus and DDR DRAM push about 700 MB per second whereas the P4 designs can more than double that for the simplest of operations. However, sustained activity for the P4 is actually lower than the Athalon, perhaps 600 MB per second revealing why slower P3's can actually outperform the latest P4's.

    As an aside, the latest G4's from Apple typically move around 1000 MB per second sustained and can push even faster when using Altivec. Why Intel did not go after Apple, Motorola, IBM, Sun, and MIPS with their FUD about clock speeds I don't know. This whole thing was probably started by someone in marketing.

    --
    Visit Jonesblog and say hello.
    1. Re:CPU Benchmarks mean nothing by BWJones · · Score: 2

      Apple doesn't make the G4, Motorola does :)

      Actually going back a while the consortium of Apple, IBM and Motorola have had input into the design of the G4. Great history here: http://www.mackido.com/History/history_of_aim_hw.h tml While technically true that Motorola actually burns the silicon for the current G4's, there is discussion of Moto outsourcing production of the G4 to IBM and Apple has been hiring lots of Moto folks to perform more in house G4/G5 and up design/revision.

      --
      Visit Jonesblog and say hello.
  21. Re:AMD's problem lies in the chipsets, not the CPU by MtViewGuy · · Score: 2

    I would agree that the earlier VIA chipsets for AMD CPU's were not exactly great, but VIA has redeemed itself with the excellent VT266A chipset that properly supports DDR-SDRAM.

  22. Re:MB bug by jridley · · Score: 2

    I have a friend with that MB. Though he and I are both Asus fans, he says that particular model is the buggiest MB he's ever had to put up with.

  23. Re:AMD's problem lies in the chipsets, not the CPU by arivanov · · Score: 2

    1. Intel chipsets are not very shiny either. BX was the last great chipset. Some 815-s are kind'a OK as long as you do not use all features, but overall current Intel chipsets are not as good as HX, BX and GX used to be.

    2. Many problems are located in a pat of the chipset, more specifically in the case of most AMD mainboards this is VIA attempt at IDE. Via since the Apollo mainboards for Pentium 1 and K5 has always had problems implementing a decent IDE. If you are using linux you can simly get around this by buying a CMD649U based controller. They are usually frowned upon because of the multiple bugs in 640, but current ones are brilliant. I have used them for years on both Intel and Alpha and they solve most of the issues with having a VIA based Mainboard.Same goes for sound and network if present. In other words just ignore the Via peripherals and buy proper ones.

    --
    Baker's Law: Misery no longer loves company. Nowadays it insists on it
    http://www.sigsegv.cx/
  24. Re:MB bug by 1010011010 · · Score: 2

    You should have made your purchase more carefully.

    Oh yeah, no more Compaq boat anchors for me. I bought it because it was a good price on an athlon with a 3dfx voodoo card, cd recorder, and dvd drive. One of the first athlon systems available. Pretty standard hardware.

    But still... that special Compaq something that makes good hardware go bad.

    --
    Napster-to-go says "Fill and refill your compatible MP3 player", which is a lie. It's not MP3. It's WMA with DRM.
  25. same number of instructions! by unsinged+int · · Score: 3, Insightful

    From the ZDNet article:

    AMD's insistence on IPC is also misguided, Dunford says, since the Pentium chip has to execute fewer instructions than the Athlon XP.

    Okay, they've got to be referring to the fact Athlons are really a CISC-to-RISC architecture that translates the x86 instructions into an internal RISC ISA. One CISC instruction would typically correspond to more than one RISC instruction, so yes, it would be executing more RISC instructions than a Pentium would execute CISC instructions...but this is deceptive.

    I'm a user running a program who wants the program to finish ASAP. To me, the processor is a black box that takes instructions from my program and does whatever it needs to so the program finishes ASAP. As a user I DO NOT CARE that it changes to RISC internally. All I care about is it executing my program, which is a set of CISC instructions. If you run the same program on an Athlon and a Pentium they will both execute the same number of CISC instructions...they have to...otherwise one of them is not correct. So as long as the IPC number AMD is using is in terms of number of CISC instructions per cycle, they certainly do have a valid comparison and are not misguided as this guy says.

    1. Re:same number of instructions! by psamuels · · Score: 2, Interesting
      If you run the same program on an Athlon and a Pentium they will both execute the same number of CISC instructions...they have to...otherwise one of them is not correct. So as long as the IPC number AMD is using is in terms of number of CISC instructions per cycle, they certainly do have a valid comparison and are not misguided as this guy says.

      You are ignoring the fact that many CPU-intensive programs are optimised separately for Athlon vs P4. Vendors often use MMX, SSE, SSE2, and 3DNow! instructions to speed up critical algorithms. The P4 doesn't support 3DNow! and the Athlon doesn't support SSE2.

      (OT: Even when a CPU does support a specific extension package, it may or may not provide a benefit. You'll see this if you dig into the internals of the Linux software RAID code, specifically RAID5. A RAID5 array stores not only your disk data but also one copy of "parity" information, which must be tediously calculated for all blocks of all disk writes. Ingo Molnar wrote several RAID 5 parity implementations for MMX etc, and at boot time, the code takes a couple seconds to automatically benchmark which is the fastest for the current CPU. It turns out that (if I remember correctly) the 3DNow! version isn't used on the K6-2 since, oddly enough, the code written for non-MMX Pentium is faster. The 3DNow! code is used on the Athlon, though.)

      --
      "How can you claim that you are anti-crack, while still writing a window manager?" — Metacity README
  26. Re:MB bug by arkanes · · Score: 2

    I've got that same one and no end of troubles with it. One thing that helped me was DOWNGRADING the VIA 4 in 1 drivers.
    And soon, soon! I get my Tyan Thunder *drool*

  27. Re:Huh? by Shadow99_1 · · Score: 2

    Apparently you don't pay much attention to what AMD says... When they first released the XP Athlon's they made quite a big deal about how their rating was to compare to previous Athlon cpu's & doesn't (at all) compare to Intel's Ghz ratings... So far the XP's ratings would actually be far under their equivalent P4, only northwood P4's are starting to correct that...

    --
    we are all invisible unless we choose otherwise
  28. Will this report really make any difference? by instinctdesign · · Score: 3, Insightful

    I'm not sure if this has been said or not (I didn't see any posts, but I might have missed one.) so I'll say it anyway.

    How much will this report will really matter? In the average consumer sector, where the PR rating was really intended for (to combat the perceived performance vs. megahertz gab with Intel), they probably will never see or hear about this report.

    Its not going to have much effect in that case, but even in the business sector, what's the chance it will make a difference? AMD has been working on building a business end to their products for awhile now, and I doubt that this would make much of a difference to those efforts. Most if the people that would be in the marked for an AMD from that area ought to know about the PR and likewise would be more likely too actually look at reviews/benchmarks/etc than base all their decisions off of what really amounts to just hype, which this report, and notably enough, the AMD PR rating both are. Though perhaps I'm giving business buyers too much credit...

    --
    forma3
  29. Who honsetlycares? by stubear · · Score: 3, Insightful

    Who really gives a rat's ass? I run a dual PII Xeon 450 system on a motherboard I got from Supermicro (case too) and it just goes. I have NEVER had a problem with this system. My next systemis going to be a dual P4 Xeon running on a motherboard from Supermicro because I'm happy with the stability my current system provides. The difference in times tasks are completed in these benchmarks aren't enough to make me want to switch to an AMD. Who cares if a 3D scene finishes 5 minutes later? I set my machines to render during downtimes anyway. Who cares if Photoshop can perform the lighting effects filter 1.5 seconds faster? I surely don't. What I care about is not having to worry about the latest VIA drivers wrecking my system or hoping the bargain motehrboard I purchased for my AMD CPU won't gie me problems in 6 months. I stick with Intel because it just plain works, no worries.

    1. Re:Who honsetlycares? by argStyopa · · Score: 2

      "I stick with Intel because it just plain works, no worries."

      For which the stockholders of Intel thank you for being a consumer who apparently cares less about his money than they do.

      Why would anyone buy this nonsense? Do Fords work better than Chevrolet? Toyotas better than Honda? Maybe you have some uber-comfort-level you have to have with your chips, but I'd rather save 50% of the cash, thanks.

      --
      -Styopa
    2. Re:Who honsetlycares? by Dynedain · · Score: 2

      Who cares if a 3D scene finishes 5 minutes later?

      I do. That 5 minute rendering difference is on a typically 20 minute render. Take a 3 hour render (much more typical when rendering 36"x48"@300 dpi renderings for architectural presentations), and thats a half hour difference. An extra half an hour for Photoshop touchup before needing to print for the client meeting is invaluable. Granted, I agree the extra Photoshop speed is mostly usesless (untill you try to do filters on a 36" x 48" @ 300dpi image). 3D modeling and photoshop is what I do for a living. The faster the machine renders, the more time I have to fix problems between test renders, and the more time I have for layout and touchup at the end. Those 5 minutes add up, fast.

      --
      I'm out of my mind right now, but feel free to leave a message.....
  30. Re:PR Rating Stupidity and lightwave benchmarks by tcc · · Score: 5, Insightful


    I might add, this is because some Lightwave portion of the rendering pipeline are heavily optimized for SSE2. The benchmarks on tom's hardware are flawed because he uses a scene that 95% of the calculations are SSE2-based (radiosity) and it's a known fact that it's heavily optimized (so it's clearly not a balanced scenario). If they'd use standard raytracing, you wouldn't see such a jump. In fact we use lightwave where I work, I am a lightwave fan since 2.0, and I've built up a renderfarm based on Dual XP athlon solution (with tigerMP and yes it works with bios 2.03). I don't even want to touch a dual P4 solution, clearly not a good bang for the buck even if it's faster in some (clearly not all) cases.

    Again, When you look at tom's benchmarks you tend to think like if the P4 would be almost 50% faster than AMD, when you'll render balanced stuff (which is most cases I've seen and besides, nobody will do a fully animated short with "radiosity" on, it takes forever to render, so you render 1 and use the "baking" function, so you revert to raytracing or standard rendering after that), the margin grows way thinner. When you calculate the costs, Intel is way out of range for price/performance. A lot of people told tom about his LW benchmark, but as usual, he didn't acknowledge nor changed his ways (there have been benchmark data available and howto's on the net for lightwave since 4.0 on multiple platform, he doesn't seem to want to follow the "standard" thus invalidating his work to the eyes of the LW community checking the benchmark numbers. But that's another story.

    --
    --- Metamoderating abusive downgraders since my 300th post.
  31. Re:Ya know ... by Dr.+Spork · · Score: 2
    Is my personal responsibility offending your political correctness?

    Your nonsense grammar is!

    ...the price of there processors

    ...there starting to wonder...

    Where???

    I hope this is a sign that you are not a native English speaker. In both of these cases, I think the word you were looking for is "they're". I've put you on my "grammar enemies" list and I'll be watching your posts. They will hopefully improve.

  32. Re:AMD's problem lies in the chipsets, not the CPU by Dr.+Spork · · Score: 2

    This might have been something other than FUD even a year ago, but since the 266A chipset, I think Athlon platforms took the lead in this area too. Please read up on this widely-available news.

  33. Re:AMD's problem lies in the chipsets, not the CPU by 4of12 · · Score: 2

    Speaking of chipsets, until quite recently I was very disappointed that I could not get an Athlon based system with PCI that was 64 wide @ 66 MHz, where you could get an Intel system that way.

    From where I sit: I buy AMD for home use and have been pretty happy with the chips, but the mobos and cooling fans in my system have not been as reliable as I would like.

    Meanwhile, at work, they buy Dells time after time for their proven reliability. Never mind that the price/performance ratio is atrocious, especially after you factor in the cost of the RDRAM that is frequently part of the Intel based systems.

    If AMD wants a bigger slice of the corporate market, it should really look hard into partners that don't shove their chips into "cost-conscious" MOBOs at every turn.

    --
    "Provided by the management for your protection."
  34. AMD myths debunked by defile · · Score: 3, Informative

    The exciting sequel to MySQL Myths Debunked is AMD Myths Debunked! Laugh, cry, maybe share your experiences?

    All of the people that shared their experiences with MySQL helped turn that document into a very useful weapon against nuisance naysayers. I'm hoping the same will happen for AMD.

  35. Re:Does it really matter where the report came fro by da_Den_man · · Score: 2, Insightful
    So, you would rather pay more for less performance just because you got your feelings hurt by a chip manufacturing marketing scheme? I have a bridge you would LOVE then.

    AMD rates and equates themselves with the "Industry Standard" that Intel has set forth. I have used and recommended AMD CPU's since they were able to produce a chip that met or beat anything Intel has ever produced. I did not care what the marketing was, other than the speed I was running to the speed I WOULD be running. Truth in advertising? Wake up and smell the Athlon burning....and Intel choking on the fumes

    --
    You keep going until you die..."Me".
  36. amd reliability vs intel reliability by Indy1 · · Score: 3, Insightful
    While the above post sounds like flamebait to me, i feel a factual correction is called for. As a custom system designer for 7 years now, i've worked with, built, and personally owned all the major amd and intel systems during this time. Such as P5-mmx, k6, k6-2, PII, PIII, K7, Thunderbird, Athlon XP, duron, etc.

    For a long time, the majority of the intel motherboards were MUCH more stable then the majority of the amd motherboards, though intel boards had their share of turkeys as well (820 anyone?). The trick had been to find the rare stable amd motherboard, learn every aspect of it, make sure the bios was up to date, etc. The tyan trinty 100 AT was a great k6-2 board, and my email server to this day runs on it without any problems. Most of the k6-2 boards werent very good though :( When the kt133 and kt133a chipsets started coming out, I noticed that there was a LOT more in the way of stable amd boards. In fact, very few were "unstable" after a few bios revisions. Also, the VIA 4-in-1 drivers improved radically as well.

    At the current state of processors and motherboards, i feel that the AMD/VIA platform is as reliable as the Intel/Intel platform. The majority of current market VIA boards are quite mature and reliable and when problems are encountered, often a simple bios upgrade resolves it quickly. The intel 850 and 845 boards are also equally reliable. So the decision comes down to the 3 P's, preference, price, and performance. Some people refuse to use Intel for political reasons, and thats ok. Some people refuse to use AMD because of bad experiences with previous generation motherboards, and thats understandable too. Most of the expericened hardware consultants that i know of are currently pushing AMD solutions due to the better price / performance of AMD solutions now, as well as the fact that the P-4 on the vast majority of benchmarks is no faster then a competing Athlon XP, and often slower on high performance benchmarks such as 3d rendering.

    The point of my whole rant.......With 90% of modern motherboards and processors, your going to have a stable platform as long as you configure it correctly (yes, even Intel stuff will crash on you right and left if you have a poorly configured bios, and a lot of default bios options are cruddy). It all comes down to the 3 P's.

    --
    Lawyers, MBA's, RIAA? A jedi fears not these things!
  37. frowned upon ??? by Archfeld · · Score: 4, Insightful

    C'mon the only thing 'frowned' upon by a corporate world is getting caught, or failing to make a profit. Frowning on an act would indicate some remedial conscience or morals, and as we see everyday corporations have NONE. That is not to say the individuals that make up those corps are bad but if everyone 'just follows orders', Lemmings Inc. will be as dirty as they come.

    --
    errr....umm...*whooosh* *whoosh* Is this thing on ?
    1. Re:frowned upon ??? by shyster · · Score: 3, Informative
      Frowning on an act would indicate some remedial conscience or morals, and as we see everyday corporations have NONE.

      While you and I may believe that, evidently others do not.

      We allow corporations to donate soft money, thereby influencing the political process, probably more so than the votes. We even allow them to give favors to candidates and politicians. They have property rights, can invent, can author creative works, can be exempted from laws, can buy other laws, can be sued, and can even sue for wrongs done to it! In the meantime, we also award companies for being "good corporate citizens"!

      For something that only exists on paper, and that has no morals, ethics, conscience, spirit or life...corporations sure do have a lot of corporate rights. As if a they were "...endowed by their Creator with certain unalienable Rights...".

  38. Re:AMD's problem lies in the chipsets, not the CPU by AndroidCat · · Score: 2
    Yes, the next computer I buy, I'll spend a lot more time evaluating the mother board/chipset than the chip. I mean, when you're talking about the speeds these days, everything has to be just so.

    Alas, when Joe Sixpack shops for a machine, the question is always "How fast is it?" (Where "fast" means raw CPU clock speed.)

    I've certainly had no problems with my Athlon 600. My Cyrix "166" occasionally had an iffy, but defintely kicked a Pentum 133's butt. Going back a ways, the NEC V20 wasn't that much faster than an 8088, but really improved disk transfers and graphics.

    AMD's numbering is stupid, but so's it Intel's raw clock speed.

    --
    One line blog. I hear that they're called Twitters now.
  39. PR Ratings are great... by shepd · · Score: 3, Funny

    Just look at what they did for Cyrix!

    Oh... erm... wait a minute...

    --
    If you could be told what you can see or read, then it follows that you could be told what to say or think - BoC
  40. P4 1.6A is actually a much better buy. by tyrr · · Score: 2, Informative

    Actually ESC K7S5A is a pretty lousy board.

    Decent K7 board like Epox 8KHA+ is going to cost you about a 100$.

    And don't buy motherboards without warranty. If you get a motherboard from the web and it brakes, don't expect manufecturer to replace it. Most of motherboard manufacturers have warranty agreements with recellers not users.

    But I digressed.

    So you buy 100$ mobo for K7 and 100$ mobo for P4. You buy 120$ XP1700+ and 135$ P4 1.6A.

    You clock your XP1700+ to XP2000+ (which doesn't always work), and you clock 1.6A to 2.2A (which almoust always works).

    Now the price of the systems is almoust identical but 1.6A clocked to 2.2A runs cooler and faster.

    Who do you choose?

    It used to be that K7 systems have an edge against P4s but not anymore. The only thing that's left in K7s favour is mature DDR chipset IMHO, but Intel will catch up soon. But then, there's Hammer coming down the road. Very interesting time.

    Intel is very competitive, do not forget it. They wouldn't be in this business otherwise

    1. Re:P4 1.6A is actually a much better buy. by Geek+In+Training · · Score: 2

      Intel gives big price breaks to OEMs for large quantities. On the open market, AMD is a much more valuable buy.

      And with respect to your overclocking claims... I do overclock video cards, and I used to overclock Celerons. 333 runs at 500; 600 runs at 900, etc. But look at overclocking an Athlon, where you connect the L1 bridges and choose a multiplier (and voltage) in the BIOS.

      What do you do with a P4? You typically can't change the multiplier; you have to set the FSB way up. And since you're doing that, you're generally changing your memory clocks, AGP and PCI bus speeds. Oh and you'll probably end up modding your mobo to increase the DDR voltage settings.

      How many people are going to do that?

      PS _ I stand by my "lousy board," the ECS K7S5A. It may be inexpensive, but everyone's performance and stability tests, it comes out *just* behind the
      VIA 266A. I've had mine for six months with no issue, and I have on-Board 100baseT.

      And I can put a GeForce4 Ti 4600 in it, UNLIKE the Epox board! :P

      --
      SlashSigTheorem: Humorous, Political, Critical, Constructive- If you have a .sig, someone WILL complai
    2. Re:P4 1.6A is actually a much better buy. by cobar · · Score: 2

      The K7S5A is quite nice in my opinion. I've been running mine for a few weeks now without any problems - made the vendor test it for DOA and bought an AMD certified power supply. So far no problems, and I appreciate that I can save my old ram without having to upgrade to DDR. Plus, the onboard sound/network is nice (tho FreeBSD doesn't like either very well).

      Contrast that to the multiple Via systems that die, have various crash issues, etc. I specifically refused to buy any Via K7 motherboard regardless of price/people saying "this one will be better". The Sis board delivers adequate performance and great stability so far, I'll take that any day over some high performance crash-ass Via motherboard that has to install special drivers to even approach stability. I expect my computer to never crash, anything less is annoying and unacceptable.

      If you want performance why buy Via anyway. Go grab an Nforce board for $20 that performs about the same and gives you kickass sound and networking. Or get a real board like Tiger MP/MPX that simply won't crash.

  41. What Are They Smoking? by 4of12 · · Score: 2

    Of course it is no surprise when you have headlines like

    "Vendor Says Competitor's Products Suck."
    since most consumers have a clue that there might be some bias in such claims.

    But I have to really wonder about the mentality of Intel executives that approved of paying money to Aberdeen "get an independent outside assessment to say that our competitor's products suck."

    Not to mention that Aberdeen's reputation as "an independent outside assessment source" has been pretty well sullied by this whole snafu. If they didn't make a lot of money from Intel on this story, then they made a bad business decision.

    Intel can't hope to help its reputation among knowledgeable IT people with this kind of a move. Meanwhile, the more gullible and dupable market won't read this report because they don't really care to see "so much technical detail". Besides, the g&d market is already sold on MegaHurts as the The One Number of Comparison.

    Initially I had figured it was like political mudslinging ads, but the more I look at this one it seems to be a case where the mud slinger is ending up coated with more mud than the slingee.

    Intel needs someone with more common sense to be put in charge of their public relations.

    --
    "Provided by the management for your protection."
  42. Re:(offtopic rant)Re:MB bug by arkanes · · Score: 2

    Something you might want to consider - complaints like yours (and mine) are mainly when using VIA based chipsets. Try an SiS chipset instead, before writing off AMD totally.

  43. poppy cock! by Phokus · · Score: 2, Informative
    My favorite: Via Aberdeen: Whats the flaw in AMDs equivalency ratings? There are many discussed in this Aberdeen Executive White Paper. The key flaw is that the equivalency rating is a snapshot in a moment in time and time surely marches on in the computer industry making the gigahertz equivalency subject to increasing variance over time. For example, the AMD Athlon XP 2000+ processor announced last fall runs at 1.667 GHz. The 2000+ equivalency rating is aimed at Intels P4 2.0 GHz Willamette processor.

    Via HardOCP: Aberdeen seems clueless that the basis for AMD's model numbering system is a comparison to their own TBird core CPUs and the speed they would have to run to be equivalent to a Palomino core CPU in performance. Seems as though Aberdeen did not even contact AMD in order to better understand the exact subject they were commenting on.

    You think AMD would say "we put out that number to show how fast this is in relation to Intel's chips"? Of course not. This is a MARKETING GIMMICK, plain and simple, and if it refers to AMD's own internal numbers on their own chips, or directly toward Intel's offerings, it really makes no difference. The numbers aren't that far off, Intel advertises *clock speed* (too bad the Intel chips don't execute a full instruction per clock), AMD advertises some performance number based on a benchmark, what's the difference? They're both full of shit.

    I say they publish MIPS/MFLOPS, but that's probably more technical than most people would be interested in. Some of the benchmarks actually show this, I think the AMD has about the same MIPS/MFLOPS scores in core x86, the Intel MIPS score is a little higher but its MFLOPS score is a little lower and I think that's where the balance comes out (although both of these CPU's would probably advertise MIPS/MFLOPS using their proprietary instruction sets instead of core x86 instructions).

    Big bad Intel for paying for this report, we should be happy to have a choice between CPU vendors. MS uses much more active methods to beat their competition (not that this crowd loves MS) but I don't see the masses whining their way into writing a check at the local CompUSA for a boxed Linux distro (the XP/2K hating crowd around here is a small group I'd bet). So if you think the masses don't give a shit about this little Intel/AMD debacle, cha-ching you're right. Dell and Gateway will still keep selling cheap Intel systems and up-charging for AMD's from guys interested enough to request one but who don't have the balls to build one themselves, Intel will maintain their market share and AMD price cuts will still keep Intel chips a hell of a lot cheaper than they were when Cyrix was around.

  44. Mhz means nothing by DABANSHEE · · Score: 2

    for example somone could buid a core with a internal clock reducer (like the FPU in VIAs Winchip cum CIII), so even though a chip for all intensive purposes hase a external clock of 2ghz, if it has a reducer isnide that knocks it in half (like the CIII FPU), its really running a 1ghz. Now if AMD did this with a internal 1/4 reducer they could match the Intel clock & performance wise, would you be happy then.

    Or one could build a chip with a long pipeline, so when it runs at 2ghz it performs like a 1ghz chip

  45. Re:Oh you are just a bunch of over clocking geeks by Courageous · · Score: 3, Funny

    Well, if you're going to insult all the folks with AMD processors, you could at least spell "Athlon" right.

    C//

  46. Re:PR Rating Stupidity and lightwave benchmarks by jedidiah · · Score: 2

    Your comments are speculation at best.

    OTOH, the other fellow seems to be a real end user of the program (or class of programs) in question. Any benchmark needs to reflect real world use. A glorified version of Norton SI simply isn't useful.

    --
    A Pirate and a Puritan look the same on a balance sheet.
  47. For AMD to truly kick ass on InHell... by MsGeek · · Score: 2
    ...they need to stop designing CPUs and start designing whole solutions like Intel does.

    Time and again AMD's superior CPUs get paired up with crappy VIA chipsets. AMD did make a half-assed attempt to make their own chipset but more often than not their Northbridge would be paired with a VIA Southbridge by manufacturers.

    Hopefully NForce is going to change all that, but from what I understand the prudent geek is going to have to wait for the next rev of the current crop of motherboards for that chipset to really bear fruit. It would be even better if AMD would get back into the business of making their own chipsets tailored precisely to their CPUs but that might be asking too much.

    --
    Knowledge is power. Knowledge shared is power multiplied.
  48. Bah... by Danse · · Score: 3, Insightful

    MHz can be just as misleading as the PR numbers. As I'm sure you're aware, there's a lot more that goes into CPU performance than just the MHz speed. You have to take the whole architecture into consideration. So, until and unless an objective, independent, accurrate benchmark (or set of benchmarks) is agreed upon by CPU manufacturers, I don't fault either of them for choosing to advertise in a way that is beneficial to them. While it might seem reasonable to expect people to understand that an Athlon can perform as well as a higher-clocked Pentium, consumers really don't understand anything except which number is higher, nor are they interested in learning. Sales people don't want to deal with it either. It makes them look like they're trying to hustle the customer. I think the PR ratings are pretty accurate, and even err on the conservative side. I don't see any foul here.

    --
    It's not enough to bash in heads, you've got to bash in minds. - Captain Hammer
  49. Re:Oh you are just a bunch of over clocking geeks by Courageous · · Score: 2

    Tsk, tsk. Consider this well: "those in glass houses, should not throw stones".

    C//

  50. Re:Why is everyone here Anit-Intel by freeweed · · Score: 2

    For the record, hard drive serial numbers are rather trivial to change.

    And an awful lot of equipment nowadays either allows dynamic MAC changing, or ways to spoof it.

    How exactly can you change a hard wired CPU serial number?

    --
    Endless arguments over trivial contradictions in books written by ignorant savages to explain thunder in the dark.
  51. Re:Why is everyone here Anit-Intel by psamuels · · Score: 2
    For the record, hard drive serial numbers are rather trivial to change.

    Granted.

    And an awful lot of equipment nowadays either allows dynamic MAC changing, or ways to spoof it.

    AFAIK you generally can't change the boot-time MAC address, only the address(es) your card listens to when it runs.

    (Of course, this is often good enough. I recently had an episode with a software package from PTC - they sent me a license generated from the wrong host ID. To verify that the software itself worked, I changed the MAC address of the machine. Sure enough, that fooled the license manager. This was on HP-UX.)

    How exactly can you change a hard wired CPU serial number?

    By not giving access to it. I believe the specific CPUID level that gets the PSN can be made privileged, so only the OS kernel can read it.

    If you have an OS kernel that will conspire with your web browser to use your ID to track you and "destroy your privacy" ... then you have bigger problems than a PIII serial number. Because that same OS could just as well use your original MAC address, or your hard disk serial number, and store it in some other location - we'll call this location a "registry" - and henceforth it doesn't matter what you change. For that matter, the same browser, in collusion with the OS (for the purpose of argument we'll say the browser is "part of the OS"), can just as well use a unique registration number which was printed on your OS install media and which you typed in during the installation.

    Not that any company would ever produce such an OS or such a browser, of course, but work with me here. And if you had no way of independently verifying the workings of said browser - say, if it were closed-source - then worrying about the effects of a mere PSN would be rather absurd. Much like driving a car off a bridge into a lake and worrying whether your paint is sufficiently rust-proof.

    --
    "How can you claim that you are anti-crack, while still writing a window manager?" — Metacity README