Next Generation CPU Refrigerators

Iddo Genuth writes "Researchers at Purdue University are developing a miniature refrigeration system, small enough to fit inside laptop computers. According to the researchers, the implementation of miniature refrigeration systems in computers can dramatically increase the amount of heat removed from the microchips, therefore boosting performance while simultaneously shrinking the size of computers."

Comments

Excellent

[Anonymous Coward]

The implementation of miniature refrigeration systems in computers can dramatically increase the amount of heat removed from the microchips.

Of course, the next step will be to dramatically increase the heat output of high-end CPUs. Aren't arms races fun?

Re:Excellent

[RuBLed]

This will pave the way for the Year of Linux on the Desktop! (or Laptop)

with apologies to our aquatic, flightless and mostly cold-loving friend

Re:Excellent

[plover]

I thought the next step would be to dramatically decrease the size of beer cans to fit in these miniature refrigerators.

Re:Excellent

[Anonymous Coward]

Don't you mean the Year of Vista on the Desktop? A more unattainable goal, and more related to the issue of insane heat generation...

Re:Excellent

[Anonymous Coward]

Or dramatically increase the size of beer cans to fit these inside. I'm not interested in "Fun Size" beers.

(Fun for who? Beer companies?)

Re:Excellent

[The Dancing Panda]

Why would you EVER want to DECREASE the size of a beer can?!?!

Blasphemer...

Re:Excellent

[Tubal-Cain]

You removed the water.

Re:Excellent

[Anonymous Coward]

"Of course, the next step will be to dramatically increase the heat output of high-end CPUs. Aren't arms races fun?"

I know you were being cheeky, but the "heat problem" is a problem only when trying to use cheap materials to make CPU's, the "heat problem" can move farther, or closer to you, depending on how much you are willing to spend on materials, research, etc.

Personally as far as I'm concerned, I've been thinking a lot about CPU specialization lately, with the success of 3D add in cards over general purpose CPU, I'm wondering if it wouldn't be in our best interest to simply look at the most processor intensive functions that can be either 1) parallelized or 2) highly specialized, and offload them to specialized hardware.

I don't think multi-core is going to cut it, it seems to me each processor needs it's own mememory and bandwidth to do massive calculations, and then sends the results of this information to where it is needed.

I'm really wondering if anyone has done any research into the geometry of information processing functions, of what can be specifically offloaded and what should not

Re:Excellent

[somersault]

I don't think multi-core is going to cut it, it seems to me each processor needs it's own mememory and bandwidth to do massive calculations, and then sends the results of this information to where it is needed.

While multi-core isn't amazingly effective for doing 'massive calculations' of the variety that scientists usually do (compared to a supercomputer with thousands of nodes anyway), it is great for general purpose computing. It definitely helps for everyday use - whenever I use a single core computer (even with a high clockspeed), I notice the difference in responsiveness, especially when booting into Windows and all the system tray apps are loading, or running lots of applications at the same time. You have to remember that even if you're just running a single application on your dekstop, there are plenty of background processes too.

Not that I want to dissuade you from researching into more efficient processor methodologies, even if it's only for specific tasks - go ahead :) But when you get down to it, most tasks your average computer user does during the day are neither suitable for parallelisation, nor are they considered highly specialised. I'm just thinking of web browsing, chatting, checking email. Modern games do involve lots of operations that 20 years ago would be considered 'specialised', like 3D sound, graphics and physics processing, but we already have specialised processors for all of these things.

I'm really wondering if anyone has done any research into the geometry of information processing functions, of what can be specifically offloaded and what should not

I don't think you're giving the guys at places like Intel and AMD much credit.. if they hadn't thought about stuff like that then where did the idea for 'hyperthreading' and different CPU 'pipelines' come from? To me it seems that the only things that have changed in the last couple of decades is that we've gone from having computers that were mainly designed for integer arithmetic as far as hardware was concerned, to having computers with addons for floating point calculation, and now we have units capable of massively parallel floating point calculations and amazing amounts of memory bandwidth (graphics cards and supercomputers), and now we are getting APIs like CUDA to make use of graphics cards to do more supercomputer like things with our graphics cards. I'm not a CPU design engineer though, so the true progression is probably a bit more complex ;)

Re:Excellent

[b4upoo]

Condensation is a wonderful by product of refrigeration. The love of PC electronics for oozing water is well known. Perhaps refrigeration is not the best idea inside a PC case.

Re:Excellent

[khakipuce]

There used to be a joke doing the rounds

Why are the Brits no good at making computers?

Because they can't figure out how to make them leak oil

-which is a dig at the British car industry. Given that British cars were even better at leaking water than oil - there is real hope here for a rejuvination of the British computer industry.

Re:Excellent

[plover]

Or dramatically increase the size of beer cans to fit these inside. I'm not interested in "Fun Size" beers.

I always thought "Fun Size" beer went the other direction, like the size of a Foster's oil can.

Re:Excellent

[Anonymous Coward]

Maybe he's creating a Doll Party House, equipped with miniature kegs and hot chicks.

Re:Excellent

[n1ckml007]

Man, that's just cold.

Re:Excellent

[CastrTroy]

Already exists to some extent. Anybody who uses their system as a PVR knows the virtues of specialized chips. I have a TV Tuner, and it does MPEG2 encoding on board. You can record encoded video without even pushing your actual CPU above 10%. I remember trying to do the same thing with a TV Tuner without onboard encoding chips, and you could only encode at very low bitrates, and even then you'd have dropped frames and out of sync audio. For tasks that are extremely calculation intensive that you do often, it's generally a really good idea to get specialized chips. However, I can't think of any other processing that gets done on most computers regularly to justify creating a specialized chip that doesn't already exist. Sound, graphics, physics, video encoding, all have their own processors. What's left?

Re:Excellent

[Loke the Dog]

To put it simply: That is not a big problem, there are many ways around it. The big problem, I would say, is that refrigeration requires energy which is in short supply for laptops. Whats even worse is that refrigeration allows the computer itself to consume more energy, which creates a circle that just isnt sustainable.

This basic idea has been around for ages, and it has never been put to use simply because it creates more problems than it solves. Do we really need more CPU power in laptops? Is that really what we need from them? No, improved human interface devices, uptime and bandwidth are more important goals.

Re:Excellent

[Dekker3D]

.. i think it was a reference to tux ("our aquatic, flightless and mostly cold-loving friend"), living on the cpu, in the mini-fridge.
ha-ha, i'd say, but... naw.

now... if we're putting fridges in our computers, we might as well grab a beer and start running unix. i mean, who cares what you're trying to run when you're drunk?

Re:Excellent

[rtb61]

The whole concept flies in the face of all day use, overnight recharge UMPCs. It really is pointless technology. The big technology push should be for fan less CPU's to further conserve power and limit noise.

Re:Excellent

[permawired]

Why would you want to drink beer from a CAN??

Hotter?

[MasterThis]

Won't they dramatically increase the amount of heat they radiate as well?

Re:Hotter?

[treeves]

Yes, but heat flow != temperature.

Re:Hotter?

[aliquis]

Yeah I don't get this, the heat need to leave the laptop somehow, and since the refrigerator will have to be within the laptop the heat remains inside it. Also since the refrigerator won't be 100% effecient this will both generate MORE heat and energy from the battery.

Sure the CPU may get colder, but your lap will get warmer. Bad trade I'd say.

Re:Hotter?

[Bloodoflethe]

Yeah I don't get this, the heat need to leave the laptop somehow, and since the refrigerator will have to be within the laptop the heat remains inside it

The refrigerator's exterior heat exchanging pipes don't have to be inside the refrigerator itself. They didn't give any technical specs, so what are you worried about? Surely if they are working on this project, they'll have thought or experienced this problem if they were putting all items in the same location.

Also, consider that, to a point, the ambient heat inside a laptop can be higher, as long as the PUs are kept cool. Of course if this were the only consideration, eventually the ambient heat would screw all the components except for the processors, but, as I said, they've considered this already. I'm sure of it.

Re:Hotter?

[Enderandrew]

Refrigeration systems use compressors, which are big power drags. The battery drain here can not be overlooked.

Refrigeration systems from desktops exist, and they are called water-coolers.

Re:Hotter?

[txoof]

Of course the cooling system will use power and generate heat, but that heat won't necessarily be as much as a fan. A fan uses power to dissipate heat and in the process generates heat. I don't know the proper thermodynamic way to state this, but it's possible to make a more or less efficient cooling system. For example, it would be exceedingly inefficient to use a V8 engine to cool a laptop. It would do a hell-of a job of cooling the thing, but it would generate a whole lot more heat and suck down a whole lot more energy than a small electric fan.

This thing might use less power and do a better job of moving power than a fan. I have no idea if this thing works better. If this device is more efficient than a fan (uses less energy and releases less heat), then it would be superior and would not make a lappy hotter. Otherwise, it's really only good for server applications where the heat can be pumped outside the box that holds the server.

Re:Hotter?

[aliquis]

Well, personally I don't care if my CPU is 45 degrees or 75 degrees as long as my lap isn't 70 degrees.

And the sad fact with my MBP is that it probably is :D (no it's not but it's too hot.)
I'd so take 5 mm fatter computer for better cooling :/

Re:Hotter?

[0111 1110]

No they are called phase change systems. Much more expensive than water cooling.

Re:Hotter?

[Yetihehe]

No, your lap won't get hotter, as more heat will be sucked from laptop. This means you will be able to use your laptop as hair dryer. (More heat taken from cpu, radiator will be hotter).

Re:Hotter?

[KGIII]

they've considered this already. I'm sure of it.

More famous last words have ne'er been spoken.

Re:Hotter?

[aliquis]

Sucked where? How?

If it will then fine.

Re:Hotter?

[aliquis]

Actually I'd prefer to insulate the bottom, and maybe I will. The less heat transfer the better. Stupid aluminium bottom plate.

Re:Hotter?

[Yetihehe]

Sucked into radiator, through refrigeration perhaps? And then blown out as hot air (hotter than now, but chip will be cooler instead).

Re:Hotter?

[somersault]

I expect the heat will be vented out the sides like with current computer designs. Since this is cooling below ambient temperature then it seems sensible to assume that even more heat would be generated than just normal cooling methods.

The main problem I can see with this isn't anything to do with heat - it's power. Surely it's better to have an efficient low power processor that doesn't generate much heat to a superfast low efficiency (ie wasting a lot of energy through heat) processor that then needs even more power to cool it.. perhaps there is a happy medium where efficient processors can be overclocked to speeds that would be unattainable without this type of cooling, and still give better performance (in terms of speed rather than efficiency) than a more powerful CPU while still having better performance per watt though..

Re:Hotter?

[somersault]

How do you cool using a V8? You'd still need a fan attached to it do move any heat away. An electric fan will produce hardly any heat compared to the heat being generated by your average desktop CPU, which can easily get up to over 100 degrees C if it isn't being cooled.

If this thing is cooling the CPU to below room temperature, then it has to be expelling more heat than a standard fan. The motor for a fan, and the bearings in the fan, will produce a bit of heat, but it will be nothing compared to the heat of the CPU, so I don't think you have to take that too much into consideration, and even if it is more efficient in the way it converts electricity to kinetic energy (fan rotation) than the refridgeration system, it can never cool below the ambient room temperature, so unless it produces a lot of heat in its own operation (which it doesn't) as you say, it will still be expelling less heat than the refridgeration system would.

Hopefully I explained that okay, I'm not a cooling engineer :p

Re:Hotter?

[tilandal]

Heat is dissipated by a temperature difference. By pumping heat out to a higher temperature radiating surface you can dramatically increase the amount of heat dissipated at the cost of power. A small single radiator could be fitted some where actually lowering the temperature inside the case (but raising the temperature of the exhaust.) This is good for cooling but bad for power consumption.

Re:Hotter?

[drinkypoo]

We already deal with this with heat pipes. This is just using a heat pump instead of a heat pipe, active rather than passive. The goal is to move the heat away from the CPU core, to someplace you have more room for a heat sink and fan (like way over at a corner of the system instead of the middle of the motherboard.)

Re:Hotter?

[rootooftheworld]

Why are CPUs allways in the middle? Seriously, and I'm not sure it applies to all CPUs, my new laptop has a cooling outlet in the rear right side. Also, luggables aren't all that elegant as a start, why don't they just put a lumpy heatpipe and get it over with?

Re:Hotter?

[txoof]

How do you cool using a V8? You'd still need a fan attached to it do move any heat away.

We don't need no steenking fan! You just strap the bare motherboard to the roof of your V8 1970 Pontiac Firebird and drive between 90 and 100 mph. No fan, but adequate cooling as long as you're not stuck in traffic.

Re:Hotter?

[somersault]

Now that's a case mod I could go for.. :)

Re:Hotter?

[drinkypoo]

CPUs are in the middle because they need to be able to access everything in the system, and it is a benefit to keep buses short. However, they're not always in the middle, a lot of systems at least put them in the middle of the back of the system (esp. laptops.) But as we add more functionality to that core it has to take on a more central location. My dual-opteron system (as in, two sockets) has them pretty well distributed on the board.

How much juice?

[fyoder]

And how much electricity will this consume? It may not be that appealing to laptop users if it eats significantly into their battery life. And for servers many colo companies are finding themselves less constrained by space than by available electricity.

Re:How much juice?

[megaditto]

Could be pretty damn efficient if it's a heat pump.

A good AC unit usually consumes less than 10 times the energy it moves (a 1 kW window unit rated for 40,000 BTUs for example), but that depends how much colder the inside needs to be compared to the outside air.

In case of CPU coolers (cooling things hotter than ambient air), one could even GENERATE electricity if the size and cost of the "cooler" is not a concern (A thick diamond heatpipe to conduct heat away to distant thermocouples is how I would do it).

Re:How much juice?

[NoobixCube]

I've always thought a small solar panel on the back of the screen would be a good idea; solar panel technology has been a little limiting for that, though. While it wouldn't be able to power the whole computer, maybe, if the technology is good enough and cheap enough, it could be used for a little refrigeration. I wouldn't want it to go below about 28 Celsius here, anyway, since I live in the tropics. The humidity would condense if the computer were kept much colder.

Re:How much juice?

[houghi]

one could even GENERATE electricity

1) Build a data center
2) Rent it out
3) Generate Electricity
4) Profit!

So now we know why Google wants all the data of the world running on their servers. They are not competing with Microsoft. They are competing with the oil industry.

Re:How much juice?

[TheRaven64]

The 15" MacBook Pro is not a huge laptop, and its dimensions are 2.59 cm by 35.7 cm. This gives 0.0092463 square metres of area. On average, the sunlight falling to Earth is 164 Watts per square metre. This gives 1.5W falling onto something the area of a MacBook Pro. If you had a 100% efficient solar panel, you could get 1.5W. Most solar panels are a maximum of about 10% efficient, so this gives 150mW. This, of course, is assuming that the laptop is angled so the back faces the sun. In practice, the back of the screen is likely to be angled slightly downwards, so you'd be lucky to get 10-20mW. For comparison, a single AA alkaline battery (3000mAh) can provide this power output for a little over nine days. The difference to battery life that a solar panel on the back of the screen would make can be measured in seconds.

A better idea is a parasol with a power socket in the bottom and solar panels on the top. This can add a measurable amount of life to the battery and help avoid screen glare from reflected sunlight. I've seen these on sale, but they're very expensive.

Re:How much juice?

[elgatozorbas]

You can generate electricity from temperature difference, resulting in a slower heat flow. Or you can increase the temperature differences at the expense of energy. You cannot improve the heat flow and at the same time generate electricity.

Re:How much juice?

[AI0867]

You do realise you just calculated all that based on the area of the *back* of the laptop? You need the depth instead of the height.

While this only increases the area by a factor of 10, it would give you a theoretical yield of a few watts.

Revolutionary

[Rui del-Negro]

the implementation of miniature refrigeration systems in computers can dramatically increase the amount of heat removed from the microchips, therefore boosting performance

Really? So my CPU will perform faster if I put it in a refigerator?

Re:Revolutionary

[Anonymous Coward]

Yes, if you take advantage of the extra heat absorption by overclocking the CPU to run faster.

Re:Revolutionary

[Anonymous Coward]

So it's the overclocking (i.e., increasing the clock frequency) that makes your CPU run faster, not the fact that it's cooler, as the article implies. And some CPUs generate more heat than other CPUs with lower clock speeds, so that relationship isn't a linear one, either.

Also, most modern high-end CPUs can't be overclocked by much, regardless of how cold you make them. The problem isn't heat, the problem is how fast the transistors can switch while remaining in sync. Sure, if you buy a low-end CPU from a high-end "family", you can usually overclock it a lot, because it's basically identical to a high-end models (just set to a lower speed at the factory). But, again, that has nothing to do with temperature, and temperature itself does not have any influence on a CPU's performance.

Re:Revolutionary

[Anonymous Coward]

You haven't kept up on Core architecture chips then. The cheap ones will make it up to >3 ghz from sub 2ghz, and the high end ones can hit 4ghz+.

So transistor speed/pathing issues are, at least for the current generation, a non-issue.

Re:Revolutionary

[billcopc]

most modern high-end CPUs can't be overclocked by much, regardless of how cold you make them

The half-dozen Core-2 Q6600s I've taken from 2.4ghz to 3.6ghz would argue otherwise, as would the QX9650 that I pushed to 4.7ghz. But hey, what do I know, right ?

Re:Revolutionary

[Extremus]

YES! And remember: if you have a dual core processor, you will need two refrigerators...

Re:Revolutionary

[NeilTheStupidHead]

It's been my experience with many modern laptops that they tend to slow down when they near their shutdown temperatures. I don't know if it's a direct result of the heat or some software actually slowing the processor to try and generate less heat or something else, but when both my Dell and Toshiba get near their shutdown temperatures (somewhere around 90C) they both slow noticably. They both speed up again if their internal temperatures start to drop.

Re:Revolutionary

[Anonymous Coward]

If a chip can be kept cool, all things being equal,

All things being equal, it will run at exactly the same speed. What makes a chip run faster is increasing its clock speed, not keeping it cooler. In other words, it's other things being different, not all things being equal.

A chip that doesn't overheat can (sometimes) be made to run faster by increasing its clock speed (which often also requires an increase in voltage, to maintain stability). No question about that. But lowering a CPU's temperature does not make it run faster. Understood?

The GP is absolutely correct, and this is a common misconception. It was probably meant as a joke, but I know some people who have actually put their system right in front of the AC, and swore it ran faster (no, they didn't overclock it), simply because it reported a slightly lower temperature.

But... but...

[dauthur]

I've been doing this for years! I bought a minifridge for the very specific purpose of cannibalizing it for parts. Yeah, my case is 10lb heavier, but the internal temperature is 60 at any given time. It's indispensable nowadays with the exceedingly hot-running GPUs out there (I'm looking at you, GeForce 8800!) I think that a commercial product is a good idea, but I can see electric bills all over the country screaming in pain.

Condensation?

[SoapBox17]

Don't air conditioning units tend to produce a bit of water condensation during cooling? I guess we'll have to start emptying the water out of our PCs....

Re:Condensation?

[Smidge204]

Only because they cool below the dew point - which, in turn, is dependent on the humidity levels.

People who build active cooling into their computers (for overclocking) typically insulate the chip(s) and cooling block to keep air-exposed surfaces at or above ambient temperatures for just that reason.

Also, even if it does produce condensation I'd say there's little reason to worry... just recycle the condensate to provide evaporative cooling on the (much hotter) heat sink side of the system.
=Smidge=

Re:Condensation?

[Enderandrew]

Not to mention the reason you get condensation in a fridge is often that a single compressor operates both the fridge and freezer. Systems with different compressors for the two systems are more segregated, and have less condensation problems. Each system stays at a controlled humidity level.

Re:Condensation?

[Myrcutio]

It wouldn't be a bad idea for laptop manufacturers to start waterproofing their systems. It would have a nice side benefit of helping against spilled liquids as well.

Re:Condensation?

[jimbolauski]

Water is no longer a problem for electronics, a company called Shellback puts a thin clear waterproof coating on them.
http://gcaptain.com/maritime/blog/gcaptain-exclusive-shellbacked-ipod-touch-video/

Side Question???

[TheCastro]

Whenever I hear about new cooling solutions I remember a few years back someone had developed that liquid (or gel) that you could submerge computers and tvs into, but it wouldn't fry them. Everyone was talking about using this nonbonding liquid to cool computers and use to put out fires in places with paintings since it didn't ruin the paint. Does anyone know or remember what I'm talking about, or do I just sound like a crazy man,HAHAHAHAHAH! P.S. Bill Gates probably bought it to throw away.

Re:Side Question???

[jaxtherat]

You mean mineral oil immersion?

linkage: http://www.engadget.com/2007/05/12/puget-custom-computers-mineral-oil-cooled-pc/

Re:Side Question???

[TheCastro]

No, it was able to have direct contact, unless I misread about the mineral water. The other comment about the high cost sparked a memory about it being expensive.

Re:Side Question???

[SQL Error]

I think he's probably thinking of Fluorinert, which was used to cool the Cray 2.

Re:Side Question???

[jaxtherat]

mineral oil mate, not water. You're probably thinking of some sort of liquid silicate polymer, but they are hugely expensive.

Re:Side Question???

[ScrewMaster]

Or maybe Stabilant 22, although the stuff is kinda expensive to be used for immersing entire computers.

Re:Side Question???

[Artuir]

Sorry, it doesn't matter. Patent has it covered!!

http://www.freepatentsonline.com/7403392.html - Hey, check it out! They patented something in 2007/2008 that Cray did with their supercomputers at least in 1985, possibly sooner! As if this isn't proof that patenting as it is in this country, is bullshit.

Here's information on the Cray-2, which used liquid cooling: http://en.wikipedia.org/wiki/Cray-2 but I don't know if it was submerged cooling. I know Cray WAS looking at substances they could submerge boards and whatnot in sometime around then, as well.

As far as recently, Tomshardware did a bit where you can use standard cooking oil as a submersion setup:

http://www.tomshardware.com/reviews/strip-fans,1203.html

Re:Side Question???

[itof500]

I actually saw such a system. It was around 1990 at Lilly Pharmaceuticals. They had a Cray something or other and wanted to show it off to the public. The CPU(s?) were enclosed in clear plexiglass and there was a clear fluid rapidly flowing over them. The PR tape said it was a non-conducting liquid (CFCs?) used to keep the computer cool.

duke out
 

It still drains the battery

[Anonymous Coward]

Regardless of the cooling ability, it will put the same load on the laptop's battery, likely a little bit more because it has to run the compressors.

And that heat still needs to be dumped somewhere...

I guess this would be great for certain difficult hot-spots on the board, but a well-designed heat sink can usually handle it. The trade-off is that it adds more weight.

Re:It still drains the battery

[Anonymous Coward]

"And that heat still needs to be dumped somewhere."

Well this is Next Generation - they will send the heat out the main warp exhaust ports. Either that or Geordi will reconfigure the main deflector to emit a tachyon pulse...

Re:It still drains the battery

[txoof]

It still drains the battery, but not necessarily the same way that a fan drains a battery. Think of the difference between a compact fluorescent versus an incandescent bulb. They can both be tuned to release a certain amount of light, but the CF will release a whole lot less heat and use less energy to do the same job as the incandescent light. In this case, the CF bulb is vastly more efficient in doing the work of emitting light.

The article doesn't say anything about the amount of energy the new pump uses, or the efficiency. It's possible that the device can use less power and dissipate more heat than a fan. It's also possible that the thing is wildly inefficient too. Typically, liquid based cooling is more efficient at moving heat than gas based systems. This is why we cool nuclear power plants with liquid instead of air.

Finally

[krkhan]

My issues are resolved. If I accidentally spill coffee on my laptop, I'll have iced coffee as the byproduct and that ain't too bad, is it?

Re:Finally

[Crazyswedishguy]

Better yet, your kegerator and computer can be one and the same!

It costs something like $300/gallon

[localroger]

I remember a piece linked here where a couple of morons immersed a computer in the stuff and cooled it with liquid nitrogen, oblivious to the fact that liquid nitrogen was cold enough to freeze the stuff. I was thinking "one small room air conditioner..." Apparently the miniaturized and practical version of that is what TFA is, although I say that as conjecture since I haven't read TFA.

Hype

[MojoRilla]

The article says:

The researchers developed an analytical model for designing tiny compressors that pump refrigerants using penny-sized diaphragms. This model has been validated with experimental data.

Translation:
This is completely impractical hype so far. We are looking for grant and startup money.

Great...

[sabithewanderer]

I already spend most of my time in front of either my PC or my refrigerator as it is.

Re:Great...

[negRo_slim]

Why not just cut out the middleman?

Re:Great...

[sabithewanderer]

Thanks, but no thanks. The walk back-and-forth is about the only exercise I get.

Now if they could just make a little alteration

[LM741N]

and bring that cooling around to that cupholder thing on the side of my laptop, I could keep my beer cool as well while I'm downloading pr0n.

Power Requirements?

[txoof]

I wonder what kind of power these little diaphragms suck down. I imagine that a liquid based cooling system is more efficient than one based on circulating air. It's great that this technology can move heat away faster, but I wonder if it can do it at a lower power cost.

An alternative...

[jd]

...is to position the computer upside-down. Condensation does not form on the hot surfaces, only the cold surfaces. If the cold surfaces cause the water to drip away, there is no way for the water to interfere. Another option is to refrigerate the entire computer (which is done by overclockers), as the coldest point will then be far away, and you've the added bonus that the air will be very dry within a short timeframe.

A third option would be to run copper from each chip surface to the refrigerator. The heat gradient will prevent any chip running hot, you only need one refrigerator, and you can handle the case of the heavy workloads shifting from one part of the system to another.

Re:Mini-Aircon DIY

[Vectronic]

I don't think so, other than making a lot of noise and using more electricity I dont think it would do much of anything, you could use it to create a vortex heat exchanger, but your engine would have to be running at RPM's far beyond what a normal combustion engine can run (like in the 100,000+ RPM range).

Besides, if you are doing that, you may aswell go for full condensing cooling, which a combustion engine wouldnt be able to handle because they dont seal well enough to create enough pressure needed, thats why diaphragms are used instead of cylinders.

Is it small enough...

[spankymm]

to fit *inside* a beer can?

Re:...boosting performance while shrinking the siz

[txoof]

The Tardis' outside dimensions and volume remain the same (it's stuck as a Police Call Box), it's interior volume, however, is limitless.

I would trade my lappy for a Tardis any day of the week though.

Re:How much juice? Not as much as a Peltier I hope

[danwat1234]

Good thing they aren't doing the Peltier route! They'd be wasting their time.

What's the problem?

[Aphoxema]

Miniature? I personally don't see the problem with lugging around something like this...

http://teeksaphoto.org/Archive/DigitalTimeline/NewTimelineImages/osborne1.jpg

Hell, I might just get one of those for checking my email on the go.

Refrigerator CPUs is

[davidsyes]

what I initially thought, hehehe....

But, I suppose there are some hi-tech fridges out there...

bad idea

[ILuvRamen]

First of all I've been saying for years, just screw the motherboard into the back of your mini-fridge and keep installing from there. You just open the door to put in a CD lol. But also, not all components can handle active cooling. My old laptop got really hot playing games. So I used ice packs under it to cool it. It got the temp way down but the hard drive died after about a month from the extreme hot-cold difference. I assume some external parts contracted while internal ones remained hot and expanded and some parts rubbed against other parts and it got damaged. I was able to get the data off after like 10 blue screens. So the moral of the story is, active cooling that can cool it lower than the surrounding air temperature is REALLY, REALLY BAD for some internal parts.

Actually yea...

[Kaeles]

You need to remember that 90% of laptop CPUs will automatically downclock themselves if they are overheating (or over a certain temperature threshold.) They also do this if the cpu is more idle.

Re:Actually yea...

[Rui del-Negro]

The two main reasons why laptop CPUs lower their clock speed and voltage are:

1. Saving the battery.

2. Saving the next generation. ;-)

Law of Unintended Consequences

[Loopy]

"In today's news, a new CPU refrigerant system causes massive data loss for users as hard drives overheat and fail prematurely from abnormally high case temperatures. Film at 11."

Dump it near the Wifi module

[EmbeddedJanitor]

And make your own hotspot.

Active cooling means more heat output

[giorgist]

Check the back of your fridge, it's hot.

So by cooling by this method you may cool the cpu surface, butyou will produce alot more heat out of the laptop.

Fried laps ?

G

Nitrogen costs less than beer

[mangu]

I think you need to get some price information. Liquid Nitrogen does NOT cost $300/gallon

Re:Nitrogen costs less than beer

[billcopc]

You're right, liquid nitrogen does not cost anywhere near $300/gallon, but the GP wasn't talking about nitrogen, they were talking about 3M Fluorinert, which does indeed cost an arm and a leg.

The problem with these fluids is they can't keep up with today's processors. Immersing a PC in a vat of mineral oil won't magically cool the damned thing. You still need to extract the heat from that big pool of sludge; natural convection just doesn't cut it anymore. In fact, the fluid acts kind of like an insulator, because it moves so slowly that heat builds up right on your processor. You'd need propellers to move the flooz around, probably pump it through some sort of radiator.

On the plus side, I could use my overclocked PCs to cook me some french fries for my poutine :)

Re:Nitrogen costs less than beer

[moosesocks]

Although those costs seem somewhat realistic for small quantities, the cost of Liquid Nitrogen can go down to pennies per liter if you're producing it in large enough quantities. (If you've got your own Cryo plant on-site, this can be as low as dollars-per-ton, ignoring capital costs associated with building said plant)

Transportation and storage are the two key expenses, and though still not particularly expensive, are nevertheless an order of magnitude more than the what it takes produce the stuff. Really, as far as commodity liquids go, LN2 is amazingly among the cheapest you'll ever find, apart from tap water.

Next Generation CPU Refrigerators?

[Veggiesama]

Don't they call those "replicators"?

Lap Burners

[Mishotaki]

Welcome to the future! what they are presenting here is a way to cool the components by transferring heat... so when it's transferring the heat away from the processor, it will take it away to dissipate it, among the heat of the compressor and everythign lse of the system... therefore having much more heat to dissipate than the normal portable computer, meaning it will probably give you second degree burns whenever you try to use it wherever you don't have a flat surface and need to use your lap instead...

Unless

[RevWaldo]

Unless they're able to do some clever-bastard engineering to route the heat elsewhere - the top edge of the laptop screen, perhaps? If they could somehow route the tubing through the hinge the coiling could sit inside a metal "handle".

If there's no patent on something like this, I got dibs. :-)

(No, seriously, I got dibs.)

The best way to get the watts out of your PC

[symbolset]

I say it every year and this is as good a place to say it as any.

The easiest way to get the watts off your processor and out of your PC is...

not to put them in. Duh. Fortunately, somebody is listening. Finally.

Re:The best way to get the watts out of your PC

[ejecta]

I agree completely! Right here I run two PC's first based on VIA PC2500E motherboard like the GPC which was on /. awhile ago and the second is the VIA MM/PC3500 which is essentially the same + PCI-Express x16 slot and HDTV.

They're not bad, the motherboard & onboard CPU costs less than most other plain motherboards for Intel/AMD.

Re:The best way to get the watts out of your PC

[symbolset]

That's a good choice. If you need another Mythbuntu client though you might try the Intel Atom motherboard. They've made great strides in power efficiency and it seems they'll make more.

I recommend the Pico PSU power kit to go with both yours and this new one. DC is the wave of the future.

Re:The best way to get the watts out of your PC

[ejecta]

I would like to invest in 2x PicoPSU's but simply can't afford it at this stage... am just using a bogdy 40 watt psu out of a circa 2004 IBM Netvista.

Uses alot more power due to inefficency but I figure cutting down from a Athlon 2000XP to this will save a fair bit of juice considering it's on 24x7 365 days a year.

I've had a look at the Intel offerings but they're hard to lay your hands on over here (Australia) and from what I've read whilst the cpu is low power the northbridge can burn quite a bit of juice (although I could be wrong).

Putting household appliances into computers

[ciaran.mchale]

I was going to make a smart ass comment: "A few years ago manufacturers put computers (packaged as Internet browsers) into refrigerators; now they are doing it the other way around. I wonder what other household appliances will follow the trend?"

But then I thought about it and realized that there are already several other household appliances and gadgets in computers. CD players, DVD players, Televisions (TV tuner cards), radios (Internet radio), telephones (Skype and the Telecrapper 2000), cameras (webcams). Heck, you can even buy USB-powered lava lamps, pencil sharpeners, and a small hot plate to keep a cup of coffee warm.

I know some people will say the refrigeration technology is used to cool the CPU rather than being a general-purpose refrigerator in which you can store food and drink. However, it wouldn't surprise me if a combined computer-and-general-purpose refrigerator is manufactured at some point in the future and marketed at geeks. "When I've been coding for 4 hours straight and I need a drink, I just reach down and pull a can of Jolt from my computer's built-in refrigerator."

Followup

[symbolset]

The next billion users just don't have the watts to put in. See this firehose article referencing this news report: IT capital Bangalore to face power cuts.

Intermittent power outages are going to pay hob with your VOIP-based tech-support unless they've got their redundant power bases covered. Normal users? If you aren't solar and wireless, you're offline for up to two hours each day. You kilowatt gamers? You'll have to goldfarm later I guess.

Green energy?

[Lord Lode]

A laptop with a freezing system inside? But what about battery life power? I'd prefer to be able to work 8 hours at normal speed than 4 hours at "boosted" speed! In regular desktop PC's I'd also like to see the research go to reduced power consumption in more powerful chips instead of combatting more power consumption by adding cooling that also consumes power to it...

Combo Number 1

[theleoandtherat]

Miniature Refrigeration Unit with that Liquid Metal CPU Heatsink hook to the Heat Vent for your cloths dryer and your desktop computer

http://it.slashdot.org/article.pl?sid=08/07/20/2326201

Sad, they haven't made

[viosz]

any comment about the expected power consumption of the system.
At least I haven't seen one.

Would be nice to compare it against anactual water cooling system, which would be on the same level of cooling.

Comment removed

[account_deleted]

Comment removed based on user account deletion

Why heat the bottom anyway?

[VanessaE]

A lot of people have mentioned how this would warm your lap unacceptably. So why not put the warm side of the heat pump somewhere in the display section? I don't know of too many reasons why one need to keep their hands on the display, let alone hold the laptop by it.

Better yet, skip the fridge idea altogether, use something passive, and turn the entire backside of the display section into a giant heat sink. I'm sure someone can figure out how to make a flexible heat pipe to pass across the hinges.

You could even get fancy and have everything covered by exhaust vents/louvers that automatically close when you shut down or put the machine to sleep, and a small turbine-style fan on each side, to move the air without wasting a lot of space.

Just make sure you deal with any excess heat from the display panel.

Re:Why heat the bottom anyway?

[intx13]

LCD panels are very sensitive to heat; if you check your laptop's manual it'll probably have a phrase in there about keeping the display out of direct sunlight for too long, due to heat concerns. The back of a panel full of LCDs is not the place to be dumping dozens of Watts of heat!

Heat

[Krneki]

I have already problems with my PC overheating my room. What is next, keeping it outside?

Lapburns

[GottliebPins]

Yeah, now you can super cool your overclocked laptop. Unfortunately the air coming out the back is now 600 degrees. CAUTION: DO NOT PLACE LAPTOP ON LAP!

Sure, they've made it small...

[BobMcD]

...but does it protect from nuclear blasts???

Re:Why must they be symetric?

[somersault]

You mean like motherboard chipsets? These days the chipset is gradually being moved into the CPU die anyway, and even graphics are being integrated with the CPU die, so I don't think heat dissipation is the main problem there. As everything is made smaller, chips can be run on lower voltages and generate less heat anyway. For mobile devices you are pretty limited in how far you can spread things out as well. I did refer to desktop CPUs in the GP post, but that was me being a moron as I just found it easier to visualise a desktop layout than a laptop one, seeing as I haven't fully taken apart many laptops.

Fridges also have to obey thermodynamics

[esdf]

At the back of every fridge is a massive heatsink.. soo whats going to be cooling the fridge heatsink?.. another fridge?!

This is cool

[msoori]

Now I can put my lunch box inside the computer till lunch time, and then put it on the computer to heat it just before lunch! What a great idea!

Sure take that heat off the chip...and...

[Analogy Man]

My last laptop would burn my leg if I took it from the table to a chair and actually had it in my lap.

Even if they make my CPU happy and cool I want to know where they emit all that heat!

The Prescott is back!

[GameboyRMH]

Introducing the Core 2 Quad Prescott!

WARNING: Use with improper cooling equipment may cause the earth to go supernova. Such incidents are not covered by the manufacturer's warranty. Your PC may require an upgraded power supply unit. Check your local nuclear proliferation treaties before upgrading your PSU.

Reliabilty

[ChrisMaple]

Oh good, another complex mechanical system to fail. When this one goes, either your CPU melts or temp sensors shut down your system until you replace it.

Re:Reliabilty

[Krneki]

If it melts I can finally get a CPU tattoo.

Re:Mini-Aircon DIY

[nasch]

If you're just running air through the engine with no combustion, there's no net compression. The cylinder would draw air in on the down stroke, close the intake valve, compress the air on the upstroke, and the air would expand again on the downstroke, leaving the air at its original volume, open the exhaust valve, and expel the air. Repeat. So you would be just using up power to do nothing, unless I'm missing something that this coupler is doing.

Re:Mini-Aircon DIY

[hardburn]

I specified 2-stroke engines, which do not understand the concept of "valves". The coupler would also restrict the airflow before releasing it to the larger pipe, so incoming air would be compressed. This is basically the same as any othe AC, just smaller.

John

[Shaugie]

Just don't forget to close the fridge door.