I said Rosetta, this here's the Rubber Duck, and we ain't gonna pay no toll. So we crashed the gate, doing 98 (m/s), said let them truckers roll, 10-4.
Back when I had a blackberry (even the Pearl, but the full qwerty ones too), I could write extremely long emails very comfortably from the phone, and I considered it unacceptable to degrade the email just because it was a mobile device. More importantly to me is I could compose these messages quite accurately without looking at the screen - for example while walking through an airport, 100% looking ahead of me. A quick proofread before sending was all that was needed, and because I had cursor manipulation rather than touch, it was quick to make corrections.
All of this has gone away with a touch-only phone. I DO write shorter emails that I need to follow up on later in more detail, I can't do it easily while walking, AND it's a pain to fix mistakes due to having to position the cursor - so I often leave known errors in there.
The market segment point is spot on - people are still buying phones, despite the lack of keyboards, so the manufacturer has no incentive to make keyboard phones. I bought the Droid Mini when I did my last upgrade because the Droid4 was too large, and I was hoping that I might be able to hack an iphone slider case to fit, because it was within 0.1" of iphone5 in all dimensions. About a year later, I haven't bothered with the slider case, but my mobile emails have definitely suffered.
For extra insurance, use a cheap USB sound-card instead of the line-in on your laptop... much easier to replace the USB one when (not if) you blow the input.
GeoRegArcView is a free utility which lets you make an ESRI world-file to georeference any jpg. You just have to identify the lat/lon of any 2 points on the map, and it can generate the file.
The world file is a text file the same name as the original file, with a "w" on the end of it (e.g..jpgw). It identifies the upper left corner of the image and the degrees-per-pixel in the horizontal and vertical directions.
Even if your images won't be.jpg, you can convert to jpg just to generate the world file, and then rename the world file to.bmpw,.tifw, etc.
This is really cool -- Ham radio has been doing almost exactly this for years.
A ground station with nothing more than a 5 Watt handheld VHF transmitter and a regular 19" long antenna can send a position report and message via a number of satellites, including the International Space Station, using a protocol called APRS. As these are low-earth orbit satellites, you generally only have a few minutes window with each pass, but it's not terribly hard to do and there are a few satellites to potentially catch position data even if you don't get every pass.
For sharing between DVR's, one solution is to move all of your capture cards to a single GBPVR server, and then make all of your rooms "clients" to that server. (Or use a popcorn hour media extender as the client)
Another perhaps simpler option is to make each PVR's "recordings" folder a network share, and then add that network share as a "video library" folder on all the other machines, so you'll be able to browse each PVR's recordings from all the other PVRs
"after a bit of VB coding, I had this nifty little program running on a coworker's computer (we'll call him "Klif" to protect his identity). It worked like a charm -- when I came in the next morning, Klif told me rather excitedly that his computer had discovered extraterrestrial life."
I used to run Myth ~2 years ago, but got fed up with issues and linux in general (ok, so kill me slashdot). Then I switched to SageTV which was nice for a while.
IR control: At the time I used WinLirc to transmit IR to control my Dish network box and it worked pretty well. Needed a custom script to take SageTV's channel changing format and translate it to WinLirc's format, but worked after some tweaks. Not sure about motorola but don't see why it would be a problem with enough work - LIRC has a great resource for IR codes. [I was using a homebrew IR blaster... basically an IR diode and a resistor hanging off the DTR line of the serial port]
Built a new HTPC 2 months ago with Win XP for simplicity and netflix access. I tried both GB-PVR and MediaPortal. Mediaportal looks flashier, but the UI is much slower and lacks a few key features... which is why I went back to GB-PVR. I've been very happy. Very few crashes, but should probably setup a weekly reboot for insurance. Yeah it's not open source, but it's still free. There's a plugin for GBPVR which will let you launch Zinc for all your streaming content, including netflix. There's a FANTASTIC web interface, including the ability to stream any of your recordings (think Slingbox). There's a plugin to control uTorrent. And GBPVR can work directly with a media extender like Popcorn Hour, if you don't want to have another PC for another room. [Though you can build a whole mini PC for the other room for the same cost as a popcorn hour]
A friend of mine tried Windows 7's media center features and is very happy. His small daughters can run it, including playing back all of their DVD's that he has ripped to a server.
In the unlikely event that anyone is actually interested:
TUNER: I built the HTPC with a Hauppauge 1600 tuner card. Initially intending to get free ATSC over the air, I discovered I could get the same channels from my cable provider in clear QAM without needing the antenna. (Cable is for cable modem only). The digital side of the tuner can record more than 1 stream as long as it's on the same physical RF channel. Plus I can use the analog tuner simultaneously for standard-def recording. So I can record 2+ shows at once, from one card.
MOTHERBOARD: I put that in a mini itx case on an intel atom 330 mobo with s-video output and built in spdif audio (though I did have to make my own cable for the spdif). Svideo was useful until I got a better TV. Mobo only has VGA output, so that limited my HDTV selection slightly, but not bad. The whole thing (tuner, mobo, case, ram, HD) was http://www.newegg.com/Product/Product.aspx?Item=N82E16813121359 review, explaining video capability at 1080p: http://www.mini-itx.com/reviews/atoms/default.asp?page=8
GUIDE DATA: setup was a pain (and a real learning curve about digital TV), but now that I got it all figured out I'm getting it for free using MC2XML.
You know that $100 phone you bought when you sign up for a new contract? It's really a $300 phone... I don't have a source, but I recall reading somewhere that it takes over a year for the cell company to recoup the cost of the loss-leader phone they gave you.
"Average Revenue Per User" is the cellular industry term that is key here. The wireless industry does everything it can to eek out every single bit of revenue from each user. Text messages, pictures, ringtones, etc. So, I don't think you'll ever see this phone in the states... there is not even a CHANCE of increasing revenue.
MAYBE you could see this phone in the pre-paid market, which typically has simpler phones anyway (and higher airtime revenue).
I think you're trying to use specific clips, so this is OT, but if all you need is to demonstrate video capabilities of something, you could download NASA videos. They are pretty boring, and not a lot of motion (i.e. it's not really a great demo to show how fast your processor is), but they are openly licensed.
how about from Bart vs. Australia when bart introduces frogs to australia...
"A subplot through the episode where Bart brought his pet frog into the country past customs. where it reproduces and spread rapidly throughout the country and ruins Australia's ecology (a reference to the actual introduction of non-native Cane Toads into Australia.)"
I can't find the exact quote, but it's something like:
Lisa: That's a frog
Australian guy: Frog? That's a funny name for it. I'd have called it a wopple-dinger
need to watch out for trying to use VNC over sockscap. Whether it's the Java or the Windows client, both seem to open up connections outside of the tunnel - I think I was able to see them using netstat.
seems the only safe way to do it (for VNC anyway) might be to setup a static port forwarding and then use the VNC client to localhost:5900, etc.
http://www.rs4u.com/SSHTunnel/ - great ssh tunnel program for a windows client, alternative to having to setup and manually run putty. Sets up a tunnel, socks5 proxy, lives in your systray, totally clean.
Systems is very tedious and abstract... if you're used to being low level with HDL or whatnot, SW will be more fulfilling to you - actually solving problems, instead of creating them.
unless there's a reason that you can't have a 1 character tld
[not to mention that "mo" are on the same key in a cellphone, making it even more annoying to key in... but at least predictive text might pick up that you're typing "mobile"]
yeah, basically the same thing as IE Quick Search, except you first have to go to a webpage to do it. Unless you make a quicksearch which submits to yubnub...
Slashdot Mirror
I said Rosetta, this here's the Rubber Duck, and we ain't gonna pay no toll. So we crashed the gate, doing 98 (m/s), said let them truckers roll, 10-4.
http://youtu.be/0gu2_ALY7oA#t=...
Back when I had a blackberry (even the Pearl, but the full qwerty ones too), I could write extremely long emails very comfortably from the phone, and I considered it unacceptable to degrade the email just because it was a mobile device. More importantly to me is I could compose these messages quite accurately without looking at the screen - for example while walking through an airport, 100% looking ahead of me. A quick proofread before sending was all that was needed, and because I had cursor manipulation rather than touch, it was quick to make corrections.
All of this has gone away with a touch-only phone. I DO write shorter emails that I need to follow up on later in more detail, I can't do it easily while walking, AND it's a pain to fix mistakes due to having to position the cursor - so I often leave known errors in there.
The market segment point is spot on - people are still buying phones, despite the lack of keyboards, so the manufacturer has no incentive to make keyboard phones. I bought the Droid Mini when I did my last upgrade because the Droid4 was too large, and I was hoping that I might be able to hack an iphone slider case to fit, because it was within 0.1" of iphone5 in all dimensions. About a year later, I haven't bothered with the slider case, but my mobile emails have definitely suffered.
as others have said, soundcard-based scopes would be the simplest and easiest (if the work you'll be doing will fall within the bandwidth)
A set of probes will help - this set has some protection circuitry built in: http://www.virtins.com/P601PC-...
For extra insurance, use a cheap USB sound-card instead of the line-in on your laptop... much easier to replace the USB one when (not if) you blow the input.
also flown at Lakehurst: The Hindenburg
http://en.wikipedia.org/wiki/Hindenburg_disaster
GeoRegArcView is a free utility which lets you make an ESRI world-file to georeference any jpg. You just have to identify the lat/lon of any 2 points on the map, and it can generate the file.
The world file is a text file the same name as the original file, with a "w" on the end of it (e.g. .jpgw). It identifies the upper left corner of the image and the degrees-per-pixel in the horizontal and vertical directions.
Even if your images won't be .jpg, you can convert to jpg just to generate the world file, and then rename the world file to .bmpw, .tifw, etc.
This is really cool -- Ham radio has been doing almost exactly this for years.
A ground station with nothing more than a 5 Watt handheld VHF transmitter and a regular 19" long antenna can send a position report and message via a number of satellites, including the International Space Station, using a protocol called APRS. As these are low-earth orbit satellites, you generally only have a few minutes window with each pass, but it's not terribly hard to do and there are a few satellites to potentially catch position data even if you don't get every pass.
For sharing between DVR's, one solution is to move all of your capture cards to a single GBPVR server, and then make all of your rooms "clients" to that server. (Or use a popcorn hour media extender as the client)
Another perhaps simpler option is to make each PVR's "recordings" folder a network share, and then add that network share as a "video library" folder on all the other machines, so you'll be able to browse each PVR's recordings from all the other PVRs
http://monzy.org/seti/
"after a bit of VB coding, I had this nifty little program running on a coworker's computer (we'll call him "Klif" to protect his identity). It worked like a charm -- when I came in the next morning, Klif told me rather excitedly that his computer had discovered extraterrestrial life."
I used to run Myth ~2 years ago, but got fed up with issues and linux in general (ok, so kill me slashdot). Then I switched to SageTV which was nice for a while.
IR control: At the time I used WinLirc to transmit IR to control my Dish network box and it worked pretty well. Needed a custom script to take SageTV's channel changing format and translate it to WinLirc's format, but worked after some tweaks. Not sure about motorola but don't see why it would be a problem with enough work - LIRC has a great resource for IR codes. [I was using a homebrew IR blaster... basically an IR diode and a resistor hanging off the DTR line of the serial port]
Built a new HTPC 2 months ago with Win XP for simplicity and netflix access. I tried both GB-PVR and MediaPortal. Mediaportal looks flashier, but the UI is much slower and lacks a few key features... which is why I went back to GB-PVR. I've been very happy. Very few crashes, but should probably setup a weekly reboot for insurance. Yeah it's not open source, but it's still free. There's a plugin for GBPVR which will let you launch Zinc for all your streaming content, including netflix. There's a FANTASTIC web interface, including the ability to stream any of your recordings (think Slingbox). There's a plugin to control uTorrent. And GBPVR can work directly with a media extender like Popcorn Hour, if you don't want to have another PC for another room. [Though you can build a whole mini PC for the other room for the same cost as a popcorn hour]
A friend of mine tried Windows 7's media center features and is very happy. His small daughters can run it, including playing back all of their DVD's that he has ripped to a server.
In the unlikely event that anyone is actually interested:
TUNER: I built the HTPC with a Hauppauge 1600 tuner card. Initially intending to get free ATSC over the air, I discovered I could get the same channels from my cable provider in clear QAM without needing the antenna. (Cable is for cable modem only). The digital side of the tuner can record more than 1 stream as long as it's on the same physical RF channel. Plus I can use the analog tuner simultaneously for standard-def recording. So I can record 2+ shows at once, from one card.
MOTHERBOARD: I put that in a mini itx case on an intel atom 330 mobo with s-video output and built in spdif audio (though I did have to make my own cable for the spdif). Svideo was useful until I got a better TV. Mobo only has VGA output, so that limited my HDTV selection slightly, but not bad. The whole thing (tuner, mobo, case, ram, HD) was http://www.newegg.com/Product/Product.aspx?Item=N82E16813121359
review, explaining video capability at 1080p: http://www.mini-itx.com/reviews/atoms/default.asp?page=8
GUIDE DATA: setup was a pain (and a real learning curve about digital TV), but now that I got it all figured out I'm getting it for free using MC2XML.
Good DTV / QAM Channel references:
http://www.silicondust.com/hdhomerun/channels_us
http://www.antennaweb.org/aw/welcome.aspx
http://www.titantv.com/
http://www.fcc.gov/mb/engineering/maps/
These are the same worms who survived reentry inside their experimental cannister when Columbia broke up in 2003:
http://science.slashdot.org/article.pl?sid=06/01/04/0334219
http://science.slashdot.org/article.pl?sid=03/05/01/1134217
Did anyone else think, from the title, that this article was about some sort of Open SOURCE ATM?
Some sort of Diebold opposite?
Guess we won't need good ole "IANAL" anymore...
You know that $100 phone you bought when you sign up for a new contract? It's really a $300 phone... I don't have a source, but I recall reading somewhere that it takes over a year for the cell company to recoup the cost of the loss-leader phone they gave you.
"Average Revenue Per User" is the cellular industry term that is key here. The wireless industry does everything it can to eek out every single bit of revenue from each user. Text messages, pictures, ringtones, etc. So, I don't think you'll ever see this phone in the states... there is not even a CHANCE of increasing revenue.
MAYBE you could see this phone in the pre-paid market, which typically has simpler phones anyway (and higher airtime revenue).
[ok I'm punching out]
I think you're trying to use specific clips, so this is OT, but if all you need is to demonstrate video capabilities of something, you could download NASA videos. They are pretty boring, and not a lot of motion (i.e. it's not really a great demo to show how fast your processor is), but they are openly licensed.
"A subplot through the episode where Bart brought his pet frog into the country past customs. where it reproduces and spread rapidly throughout the country and ruins Australia's ecology (a reference to the actual introduction of non-native Cane Toads into Australia.)"
I can't find the exact quote, but it's something like:
Lisa: That's a frog
Australian guy: Frog? That's a funny name for it. I'd have called it a wopple-dinger
flash stick stick: http://www.gizmodo.com/gadgets/peripherals/usb-fla sh-stick-stick-152473.php
http://www.inhabitat.com/entry_1132.php
http://www.gizmodo.com/gadgets/wood/index.php
yahoo widgets, aka konfabulator... XML for windowing and JavaScript for the code. Can you get to serial ports from javascript? maybe.
or the google whatever plug-in-bar thingy might work too.
i'm late on this, but... give yourself a scar on your fingertip. Will add a new feature that the scanner can pick up on.
(ok, bad idea)
need to watch out for trying to use VNC over sockscap. Whether it's the Java or the Windows client, both seem to open up connections outside of the tunnel - I think I was able to see them using netstat.
seems the only safe way to do it (for VNC anyway) might be to setup a static port forwarding and then use the VNC client to localhost:5900, etc.
http://www.rs4u.com/SSHTunnel/ - great ssh tunnel program for a windows client, alternative to having to setup and manually run putty. Sets up a tunnel, socks5 proxy, lives in your systray, totally clean.
this is an obvious step... it better be able to sync with a video ipod.
Seriously, who cares about "Watching their music"
If you have an MS in CE, why aren't you doing CE?
Systems is very tedious and abstract... if you're used to being low level with HDL or whatnot, SW will be more fulfilling to you - actually solving problems, instead of creating them.
unless there's a reason that you can't have a 1 character tld
[not to mention that "mo" are on the same key in a cellphone, making it even more annoying to key in... but at least predictive text might pick up that you're typing "mobile"]
yeah, basically the same thing as IE Quick Search, except you first have to go to a webpage to do it. Unless you make a quicksearch which submits to yubnub...