Slashdot Mirror
Commercial Water Cooling, And Quiet
Aleaxander writes: "I followed this link about three weeks ago and may have found something I've been looking for for a long time; a way to make my PC's quieter while still keeping my systems cool.
A commercially available case that is water cooled, and which according to the above review seems to perform well on the cooling front, while also running quietly? Will I be able to finally stand having an overclocked PC running in the room while I am watching TV, listening to MP3's or simply waiting out a long download while doing something else? I hope so. Anyone who has bought or tested one of these cases should post their impressions, because the specifications listed on their site probably don't tell the whole story (the chart on cooling in the Comparison section that uses a graph from Tom's Hardware, and tags their Ambient Temperature on the bottom scares me)." And really, there's no reason that water-cooled computers should be any more exotic than radiators in cars (well, except for the energy-chuggin' high power use they would imply).
You don't need more than 90 MHz for both of the above. UNDERclocking your PC seems to be the solution.
My company bought two of these cases about three weeks ago. We had bought some AMD systems with fans that were *really* loud. At the time, we couldn't find any fans that would do the same job quietly, so we got these cases.
They are very quiet, even when the fans kick in to cool the water (which isn't that often). The temperature gauge on the front usually reads about 98 when the computer is idle, and we can get it up to about 101 when we run CPU intensive tasks for a few hours straight.
We aren't doing any overclocking, nor are we cramming as many hard drives and cards in the box as possible; they're just your basic desktop computer. So, while I can't tell you how good a job they do cooling in extreme situations, it's more than adequate for normal use and it probably makes less noise than the computer you're sitting at right now.
(YMMV)
Getting your monitor to power down in X is different than getting it to power down at the text console. To get X to power down the monitor, include the "dpms" argument on the command line to X. For instance, if starting X with "startx" or "xinit", use "startx -- dpms" instead.
If that doesn't help, well, I'm out of ideas.
-Paul Komarek
I've seen a few posts saying that water cooling doesn't really reduce the noise enough to make it worthwhile, partially because of hard drive noise among other things. One advantage of water cooling over aircooling is that you can use the water to move the heat away from the computer itself (within reason).
;-) I would think that making the front of the acoustic enclosure into a door would work.
Imagine, then, acoustically insulating your case using foam, cardboard, carpeted wood, or whatever. With an air cooled case, you have just screwed up your air cooling because of too many holes in the acoustic insulation. With water cooling, you only need to allow the water cooling hoses out of the acoustic insulation, and they can go to a big radiator *outside* of the acoustic insulation.
Of course, you will want a way to access the CD, floppy, and power switch.
-Paul Komarek
On the Koolance website they say that the water-cooled power supply only works for systems under 1ghz and with non-DDR RAM, even though it's rated at 300W. For people who want to go higher, they reccomend an air-cooled PSU at... 300W. So it's not like the cooler itself is sucking too much power. Can anyone shed some light on this? I posit that no one who cares enough to buy these cases are going to be running under 1Ghz, either before or after overclocking. On one of the distributor's web sites they say only that you shouldn't use DDR with it, meaning I guess that 1Ghz is okay. I really want to buy one of these cases for the noise reduction, and of course the PSU is one of the biggest sources of noise. OTOH I must have the latest and greatest, which means a P4 in the 1.5Ghz range. Anyone aware of what thes technical limitations stemming from a using liquid cooled PSU (even of identical voltage) are, how they relate to RAM and processor speed, and any ways to flout them? Thanks!
--
I think there is a world market for maybe five personal web logs.
Overclockers.com
on a side note, I just ordered a waterblock from dangerden.com so I can watercool my pc. whee!
---------------------------------------
The art of flying is throwing yourself at the ground...
Ouch! Bad pun!
Need a Python, C++, Unix, Linux develop
gsfprez: Jessis - get your stories straight... i mean, if the poster wants a silent computer so that he doesnt have to hear the fan blowing all the time.. they call them iMacs and fucking Jobsian G4 Cubes... there's no need to bother with some weird ass hydro-powered case like it was a fucking Russian sub with James Bond at the tiller.
I was going to post that if nobody else did..
I have two iMacs - a 2nd gen 333mhz and a 3rd gen 500mhz. The 333 came with a fan, like standard PCs, and the 500 was Apple's new fanless design. Comparing the two, the 500 is faster and quieter than the 333 - the only noise is when the HD is working a lot or when I've got a CD/DVD in the drive. I haven't noticed that the 500 runs any hotter than the 333, and time to time I've even noticed more heat pouring out of the older machine. The older one had a sucky sound card and speakers, but I couldn't tell because of the blow dryer sound coming from the back. The fanless design and built in Harmon Kardon speakers/soundcard make my 500 sound better than a lot of stereos I've seen.
Compared to a PC, the fanless iMac still runs cooler than an old AMD 486/80 box I recently turned into a flower planter. Hell of a lot more useful, too.
== Paul Rickard, Editor of The Microsoft Boycott Campaign ====
4) Q: I am interested in over-clocking my system. Would a Koolance PC help me with this?
A: The current PC addresses our intended customers: the home and office user, who admire a quiet system with the added efficiency of liquid cooling. For the high-performance user, we do not feel our present system can accommodate the additional stresses placed on it by overclocking the components. Please check the news page for updates on our performance-oriented PC model coming in August.
> The power supply and the disks makes quite a lot of noice as well
Well, I have a Quantum Fireball lct15 at 4400rpm and I can't hear it spinning (air-cooled non-overclocked wimpy 400MHz celeron). Head movements are clearly recognizable, but not loud. It's more of an informational "hey, I'm doing something, in case you're interested" thing.
Looking at the resellers that sell these things... They have additional cooling units ($15-$25 extra for each) for additional CPUs, chipset, video card(s), and hard drive. That pretty much covers anything that might cooling.
Does anyone know what happened to those cooling systems that used a crystal that would absorb/emit heat as electricity was applied?
I think you're talking about Peltier coolers. They're definitely gaining market share - they're on the rack at my local CompUSA, even. They go for around $25-$50. They work as advertised, but they use a lot of electricity. They're no quieter than a regular CPU cooler, though, because they still require a fan.
What's your damage, Heather?
...is that someone in here has found a way to squish their computers into a 8 inch by 8 inch by 8 inch cube!
Speaking for the Mac users...we all thought that it wasn't a real need to have a computer run silent? No, sorry let me rephrase that..
We had it jammed down our pieholes that when Apple started making fanless computers, that it "was no big fucking deal, bitches" and why don't you worry about getting 3-fucking button mice instead and you Mac users give a shit about the stupidest things...blah blah blah
Jessis - get your stories straight... i mean, if the poster wants a silent computer so that he doesnt have to hear the fan blowing all the time.. they call them iMacs and fucking Jobsian G4 Cubes... there's no need to bother with some weird ass hydro-powered case like it was a fucking Russian sub with James Bond at the tiller.
And yes, it can run linux
guns kill people like spoons make Rosie O'Donnell fat.
I may be wrong, but doesn't making things smaller actually _decrease_ heat output?
Every time the transistor size decreases, it has been possible to increase the clock-rate, and decrease the amount of voltage required.
One of the reasons Athlons will soon be viable as processors for laptops is because of decreased transistor size.
I would guess that if Moore's Law DOES NOT continue, liquid cooled computers will become necessary.
Why are processors hotter today than they used to be? Because the extreme competition has made the manufacturers increase clock-speed and add features without always being able to decrease the size of the silicon.
Could someone confirm this, or perhaps prove me wrong?
Not necessarily. In fact, unless you're running a poor SMP implementation, you shouldn't be loading one CPU heavier than the other.
As long as you have at least 2 active threads (and decent SMP), there is no reason for CPU 0 to be loaded any heavier than CPU 1. Note that Linux 2.2 and FreeBSD 4.x don't really do SMP all that well. If you're talking about those OSes, then yes, you'll see CPU get loaded unevenly.
IMHO, as long as you can switch context and toggle semaphores quickly, you're better off with zillions of threads. Sling those threads around all over the place and don't bother with funky worker pools and coarse 10 millisecond time quanta. Alas, most operating systems don't see it that that way :P
FLAMER DISCLAMER: Linux 2.4 and FreeBSD 5.x both address SMP shortcomings and do things much more efficiently.
Whoops, you're forgetting something...
This system replaces several fans: power supply, case fan, video fan, (hard disk fan), cpu fan, etc...
But... Smaller fans have much more noise and move much less air.
Actually, really large fans are quieter and can move prodigious quantities of air.
So the best system would have 1 large fan.
Many hard disks have a "quiet mode".
Here's some good info
You give up some performance, but sometimes that would be worthwhile.
Also, here's a bunch of reliability vs. heat info from pc power and cooling
Yeah, but then they'd need more machines.
(Yes, I know you were kidding, but it's a point that should be made early in this discussion)
No, it won't cool your beer. This is NOT a phase change system like some of the systems posted here before. It just uses the (water-based) liquid for heat transfer (exactly like your car radiator), so it can't get the temperature below ambient room temp.
A phase change "heat pump" system (like an air conditioner or refrigerator) needs a compressor, coils, and special fluid. It would hard to make quiet.
And _damn_ slashcode for inserting a space where a post linewraps - if I'd wanted a space byte there, then I would have _typed_ one, dammit!
I once _had_ an (OK, used) RX7 Turbo that unfortunately developed a sticky fuel injector. I didn't get it fixed in time, so the car burned up one day.
e .html . . . There _are_ ways to get your chip die down to -40 C.
However, water-cooling systems are _much_ simpler. I wouldn't hesitate to water-cool a hot Athlon chip. Swiftech (www.swiftnets.com) markets wicked air-cooling heatsink/fan assemblies and water-cooling (block-only, pieces, kit, or bare-bones system) - with or without Peltier assist with water-cooling - that have gotten good reviews. I'm running an old 500 mhz Athlon at 700 mhz right now as I post this, with a Swiftech heatsink/fan and Peltier.
Bear in mind, though - a Peltier won't help much at high thermal loads such as recent Athlons throw off. At most, you might see 5% chip efficiency improvement from adding a 155-watt TEC, and you'll have to dissipate over 180 watts from the system!
If you want to really cool a system well - and quietly too - look at evaporative water cooling (think of nuclear plant cooling towers) or vapor phase-change cooling, perhaps with a liquid (50/50 to 80/20 water/glycol) buffer stage: cpusite.exmedia.nl/sections/steve/its-cooling-tim
Um, the actual reference is: cpusite.examedia.nl/sections/steve/its-cooling-tim e .html
The basic rule is W=CF(V**2) -- the capacitance of the switching nodes times the switching frequency times the square of the supply voltage. Capacitance has been going up as oxide thicknesses have come down, along with more layer of metal. Frequencies have also gone up; you might have noticed. Voltages have come down, but not nearly as fast as the other two have gone up.
My 500 MHz K6-2 ran on 2.2 volts; my 1200 MHz Thunderbird runs on 1.8 -- even if the capacitance had stayed constant (and it hasn't, by a long shot) the power would have gone up 60%.
Lacking <sarcasm> tags,
- My experience with watercooling is though, that even if its more effective, it doesnt reduce the "total" sound of the box. The power supply and the disks makes quite a lot of noice as well... There's no real need to cool CPU in a quiet way, if disks still makes noice
The PSU is also going to be cooled with water, making the source of the noise of the PSU (the fan) pretty much nonexistant. The hard drives, however, are something that people just sort of have to live with, however if you shop around, some are quite a bit quieter then others.Do not go gentle into that good night. Rage, rage against the dying of the light.
How about this idea- no case at all: Take a big piece of plywood, and attach the motherboard and disk drives, and take the power supply, remove it's sheet metal case and fan, and just hang the whole thing on the wall. The only thing making noise will be the disk drive.
My case is too loud. I'm an overclocker and I've got about 8 fans in my case right now. It's just too loud as it is. I didn't really want to build a water cooling rig myself, but now that these guys have one integrated into the case I'm going to do it.
Anyone know what the lead time to get one is right now? I'm sure they are busy with all the press they've been getting lately.
Yah, but talk to the employees. They will tell you that you only drop about 30 degrees while using this case. $200 for 30 degrees of cooling is a bit much for me.
I don't really mind double posts on
I posted this before somewhere but it applies more here... One way to make a nice little set up for your machines is to create your own crate like addition which could follow the typical dimensions of a desk. Now it would have to be enclosed at least the section where your pc is going to be placed which makes for cool security too if you want to add a lock to it. No one could remotely root it via booting in single modes...
Anyways what you'd do after making the enclosure is insulate is with fiberglass insulation sold at a typical hardware store (dirt cheap), drill about an 4 inch slot into the side somewhere or the back if you have enough space or the side and attach a floor standing Penguino air conditioner along with a hose used for clothes dryers. The insulation keeps both the cold air in and noise out. Not only that but when your not using your PC's you could remove the hose and cool your house.
New Blackbox Themes
Want Root?
My older brother assembled one earlier this week and here are my impressions, which by the way are far from thorough or scientific. Now for the obligitory system specs:
AMD Athlon 1.33 GHz
Asus A7V133 KT133A Motherboard
Corsair PC-133 256M memory
nVidia GeForce2 GTS 64M
Soundblaster Live Value
Western Digital ATA-100 7200rpm 40 gig hard drive
Netgear FA311TX Fast Ethernet Card
Koolance Case with Liquid Cooled power supply and CPU
First off, none of the above specs have been over-clocked yet so that he can make sure his system runs fine pre-overcloking. Secondly, this case does stay cool. It was close 80 degrees Fahrenheit in his place and the temperature never got above 108. Yesterday, with the air-conditioning on it never got above 100 even after being up for hours. Thirdly, the case is QUIET! The fans that cool the reservoir kick in at 95F at 45% power and are very near silent. Even after putting my ear right next to it, I could barely hear them. The major source of noise in his PC comes from the fan attached to the chipset and even that is fairly quiet and likely could be replaced with something much quieter(But I'm not a hardware guy so take that with a grain of salt)
BTW Everyone should read the [H]ard|OCP artical for an indepth review.
Ummm.... Sorry?
Yes, the case itself is 40 pounds but leaking isn't a problem unless you crack the reservoir or the hoses.
Ummm.... Sorry?
In the Koolance case if the CPU reaches 129 degrees fahrenheit the fault alarm will sound which(assuming your near your PC) should be enough warning.
Ummm.... Sorry?
No, the problem is poorly managed deregulation. If it was done properly, there would be no energy crisis in CA. I believe NY and PA deregulated without problems.
But right now its the market that's to blame; there are quite a few people getting rich off of the shortage in CA...unfortunatlly they are doing in such a way as to make the shortages worse, not better.
PC's seem to be getting noisier. My 2-year old PIII 500MHz on which I'm typing is about three times noisier than my 5-year old Pentium 133MHz. Both the fans and IBM SCSI drive are both much noisier than their older counterparts. Even laptops these days are really noisy.
Midrange notebook components can't generate a lot of heat, so putting them in a a slightly larger PC case than a notebook should make a fan unnecessary. And I bet drive makers would make quieter drives if anyone asked.
The HP e-PC sounds like it might be quiet, but the HP Web site doesn't indicate if it has a fan or not. And I've never seen noise measurements in a computer review.
We need a visionary PC manufacturer and customers for it. Apple has the right idea with the cube, I wish a PC maker would follow them.
--
=S
The folks at www.hardocp.com did a review on this case recently. You can find the review here:
http://hardocp.com/reviews/cooling/koolance/
Seems to be a pretty nice case actually. In all honesty I wouldn't mind having it, but the primary reason I wont buy it is because I want to build my own. Although it's cool (heh) to have a water cooled case, it's infinately cooler if you built it yourself.
Sigs are awesome huh?
While there may be no PSU fan to make noise, there are fans in the cooling base of the unit. While they are variable speed & controlled by a temp. sensitive controller, don't get your hopes up too high. The fact of the matter is that the fans have been moved one or two steps aways from their original locations. At some point the exchanged heat will need to be dissipated - and as of yet, I haven't seen a solution that doesn't produce noise. I've seen people brag about having zero fans in their refrigerant based cooling system - then the condenser/compressor kicks in and you have new "source" of noise.
-ct
Without getting into details here, you can read an intro about them here:
http://thetechzone.com/articles/peltier_intro/inde x.html
and how to make one here:
http://www.thetechzone.com/articles/how_to/peltier _cooler/
Once thing that I'd be cautious is running their dual CPU liquid cooler. According to the picture on the right of this page :
http://www.koolance.com/Clickable%20Case/largeview /CPUjacket.html
the heated "exhaust" coolant from the first CPU is directly looped into the intake of the second CPU, rather than having separate coolant loops for each. I'd be interested in knowing exactly what the difference in CPU temp was between the first and second CPU's when running full tilt.
(And yes, I do realize that the primary CPU in a dual system generally runs under a greater load & therfore would require greater degree of cooling,)
-ct
If you're interested in these cases check out this thread at ars-technica. They seem to be everything you could want in a water cooling system. Allthough the Liquid Nitrogen debate still runs hot.
All generalizations are false, including this one. Mark Twain
"It has come to our attention that Koolance PC cases shipped between April 20th and May 8th, 2001 may have potential problems with liquid leakage. This is not due to the quality of our crimping methods or materials, but an increase in pressure within the tubing itself."
The article goes on to say "In reference to the Koolance product recall of sorts: Well it started as a dream...My 1.3 T-bird running 1.4 nice and cool at 98 F. Come home at lunch....a nice swimming pool has developed in my case. Everything fried. Well, so far Koolance is standing next to their product and doing the responsible thing,replace everything...but experience tells me not to hold my breath..we'll see if Koolance is the type of company does stand behind their product and does the responsible thing if a defect occurs."
Taking a look at their specs, they say the system works best with 3 or fewer cooling hookups. So, if you have two CPUs and want to cool your video card too, you can't use the HD cooler, motherboard chipset cooler, or the liquid-cooled power supply.
They also say they have no plans for slotted processors (Slot 1 and Slot A), so if you don't have a socketed CPU, you're SOL (though putting a socketed CPU on a slot converter card would work, though those cards typically aren't supported in SMP systems)
As a practical matter, this cooling system doesn't offer cooling for the graphics board. Recent 3D boards consume more power than the CPU. Heatsinks on the RAM and fans on the graphics chips are common.
Koolance also doesn't give info about allowable inlet air temperature, so you don't know what this is really good for. Inlet air temp specs today are lousy; most Compaq stuff has a 95F inlet air temp limit, which will be exceeded in non-airconditioned environments in most parts of the US. You really want a limit around 115-120F.
In theory, anyways.
____________________________
____________________________
What did the Buddhist say to the hot dog vendor?
"Make me one with everything."
The Koolance cases apear to be the next best thing since the heat sink. It is going to be hard for them (if the cases do work as good as some claim) to keep up w/ demand.
How much is your data worth? Back it up now.
there are a bunch of fans on the bottom of the case blowing up at an angle. This helps reduce noise and keeps case kool
How much is your data worth? Back it up now.
These are available even now. I bought a bunch of these shapped in the form of CPU cooling units around 6 months back from a "Hamfest" in Ohio (around $2.5 I think). The guy who sold these was complaining that he could not sell many, but were selling like hot cakes sometime back !!
I saw these guys at comdex chicago. They took a small take and submerged a motherboard, and power suppply compleetly in their cooling solution. They had the HDD sitting out of the fluid and had the pc up and running quite nicely while fully submerged.
oops, typo... take=tank
The demo unit i saw had the ability to add additional cooling plates for more HDD's and it also has a cooling plate for the graphics chip. Also, in the desktop model case i looked at, there are 3 cooling fans built into the bottom in a seperate compatment that held the radiator. Those fans were operated by a control circut that determined when the system needed the extra cooling. There is also an LED readout of the temperature of the fluid. Unfortunatly there was no feedback from this device to the PC itself so you cannot software monitor the temp of the fluid.
i didnt get a chance to ask as it was a very popular table. However it was told that it was a nonconductive fluid (obviously).
I've got a couple of recent pieces on water cooling on my site. This one's a mix-and-match test of a few pieces of cheap(ish) commercially available hardware, with much rambling on the subject of what's doing what to whom; this one covers throwing a Peltier device into the mix, and how to tell if it'll do you any good (executive summary: if you're overclocking a current Athlon, one Peltier, even with a very high rating, probably won't cut it).
I RUN A DUAL PROCESSOR DESKTOP WITH 3 HARD DRIVES AND I DON'T SEE WHAT ALL THE FUSS IS ABOUT . MY SYSTEM IS VERY VERY QUIET. THE WEIRD THING IS THAT EVERYONE I KNOW SEEMS TO TALK REALLY QUIETLY, TOO.
-b
If I wanted a sig I would have filled in that stupid box.
If a tv transmitter can have a water/antifreeze based cooling system moving around in a 30kV environment, whats the worry with 120/240?
The first thing we do, let's kill all the lawyers. Shakespeare, Henry VI, Part 2, Act 4, Scene 2
The Dynamat is a good idea, and so is the hooded vent at the back, but they hardly make a PC completely silent, which Home Theatre PC users and college audiophiles demand (I never turn my comp off, and most other ppl don't either.)
If you want some more good hints and tips, head over to AVS Forum and the Home Theatre Computer Section, and do a search on the word "quiet." Lotta people talking about all sorts of various solutions.
The devices are still used in portable electric coolers since they can exaust the hot air from the heat exchanger directly to outside air.
- subsolar
It has come to our attention that Koolance PC cases shipped between April 20th and May 8th, 2001 may have potential problems with liquid leakage. This is not due to the quality of our crimping methods or materials, but an increase in pressure within the tubing itself. We believe this to be caused by a contaminated water source used between the aforementioned dates. Liquid solutions mixed with this may cause a chemical reaction with the aluminum coolers, resulting in a gaseous buildup and potential rupture. We are therefore asking all customers of systems shipped between April 20th and May 8th to contact us directly for a return and repair. The liquid systems will be cleaned, refilled, and thoroughly tested before being returned. Shipping costs will also be our responsibility. We sincerely apologize for the inconvenience, and hope to make this process as easy as possible for our customers. Please contact tech@koolance.com for an RMA number and return information. Thank you for your support, The Koolance Team It's nice that they are addressing it so well (or seem to) but defective stuff #0
Daniel Bendorf
You should have paid attention in science class!
The fact of the matter is that the fans have been moved one or two steps aways from their original locations. At some point the exchanged heat will need to be dissipated - and as of yet, I haven't seen a solution that doesn't produce noise. You're assuming that because there are still fans, the noise is pretty much the same. There are several reasons why this is not the case. A good PSU can be so silent you can barely hear it with your head next to it, yet it has a fan. How can this be? Fan noise is the product of many things, speed, and air turbulence over edges being the worst offenders. A larger fan, spinning slower, will pump more air, yet be much quieter than a small fast fan. This is why CPU fans are so noisy, while good PSU fans are silent. The design of the cpu heatsink obviously also affects the noise. In other words, fans don't preclude a silent computer, excellent engineering can overcome the problem. The case is question seems to be well engineered, and people say it is silent because when they power it up, they notice that they don't hear it. For the record, a cooling solution that doesn't produce noise is convection cooling. And this is possible to do with modern computers via a water cooling and a Big Fucking heatsink, or simply a 10 litre water reseviour :)
Yup, they have one running with the left case panel replaced with plexiglass so you can see in... really cool :)
There is no longer anything that can be done with computers that is nontrivial and clearly legal. -- Paul Phillips
I live 5 minutes away from the first vendor for these units (Infotech) so I've been researching the Koolance cases for quite some time.
They are quieter then a normal power supply, but they still make some noise. They seem to be very well manufactured, just by eye-balling the unit. Definatly not a "hack job". I personally haven't bought one yet (my PII350 is cool enough thank you), but it's on my list if I ever go for those cool 1GHz Athlons that can be safely OC'd to 1.4GHz+. $180+ depending on configuration - but that's the price you pay for being cool (pun intended)!
There is no longer anything that can be done with computers that is nontrivial and clearly legal. -- Paul Phillips
the LED readout of the fluid temperature that librarygeek mentions is cool -- (or is it really LCD?). Either way, that should be a standard part of a decent case.
:) Matter of fact, that's the chief reason I would like to one day acquire a BeBox -- those dancing LEDs are worth more than the machine's current processing-power-money ratio.
:)
In fact, I'd like to see an LCD with a numeric output, and with a (green / yellow / orange / red) quad-bank of LEDS beneath it, for (easy / questionable / dangerous / stupid) temperature levels.
remember, there should be more LEDs, everywhere and in everything
Just like in a car, there isn't a true conflict between dummy lights and gauges -- please give us both!
simon
"Hey Carlito, r'membah me? Benny Blanco from the Bronx!"
By the way, both the iMac and the iCube from Apple don't have a fan.
a whole bunch of stuff on building your own water cooler:
http://www.agaweb.com/coolcpu/build.htm
-greg
I can see a water cooled power supply being somewhat safe, since the connections are to the outside of the unit, and I might even look into one someday. But having pressurized water a few centimeters away from my processor would scare the living crap outta me!! I've seen old car engines where the fuel lines were leaking on the manifold. It reminds me of that. scary!!! I can imagine a hot summer day, and the power goes out, and the frickin' plastic tubes get hot enough to melt and *sssppprrrinnkleeeeeeeeeeerrrrrrrrrrrrrrr!!!!! all inside the box. I dunno about that one.
-- "Perceptions create reality. By changing your perceptions you change your reality."
My experience with watercooling is though, that even if its more effective, it doesnt reduce the "total" sound of the box. The power supply and the disks makes quite a lot of noice as well... There's no real need to cool CPU in a quiet way, if disks still makes noice.
Probable impossibilities are to be preferred to improbable possibilities.
Aristotele
Noise as an issues is like best handled by isolating the machine partially in a cool cabinet with sound baffles. There are folks who go overboard into the noise reduction. some recommendation I have seen include reducing the speed of your machine so that the computer can run without CPU fans. I have also seen power supplies that do not have and do not need fans because the design.
Needless to say, you need to have a handle on your priorities.
Check out the Vinny the Vampire comic strip
"It is a greater offense to steal men's labor, than their clothes"
What about lugging one of these to a lan party? The water must make the case a bit heavier and would it leak if it tipped over in the trunk? That would suck.
Abstainer: a weak person who yields to the temptation of denying himself a pleasure.
Abstainer: a weak person who yields to the temptation of denying himself a pleasure.
--Ambrose Bierce
The best item I've found (I'm not an overclocker, mind you) to quiet hard drives, and CD roms are the following items...
1. Teflon tape. Wrap it around the head of mounting screws. It will act as a "threadlocker" for high RPM CD-Roms (which can loosen the screws through vibration.
2. Thin rubber mat. See above.
3. DynaMat, or another acoustic absorbing material.
In fact, the ultimate way to quiet a PC is to make a "snorkle, over the top side of the PC. Take some sheet tin, available at any hardware store, use a razor blade, and a pair of tin snips, or heavy duty scissors. Leave small fins for mounting it to the back of your PC, line it with DynaMat, and you've just knocked out about 60 to 70 percent of your PC's noise, the cooling fans. Make sure you use a rubber, or teflon washer when mounting it.
Line the inside of the PC with DynaMat, (leave room for vents, of course) and the only sound you'll hear from your PC is when you're swearing at it.
krystal_blade
It will be easy to motivate our fellow man; there is hardly anything people treasure more than not being annihilated.
I was not saying you could not get more cooling devices, but that their pump , according to them, only can handle pumping to three of them. From their FAQ -
8) Q: How many liquid-cooled components can I place into a system? £
A: With our current PC model, we recommend a total of three liquid coolers for best operation. This includes the power supply-- if three coolers are needed elsewhere, please consider our alternative model with an SPI 300W power supply. Filling a case with liquid cooling components puts a heavier burden on the impeller pump, which may lead to decreased performance in the way of higher temperatures.
Papa Legba come and open the gate
After reading the site and poking at the specs I have some misgivings, some of the specs seemed cooked in their favor to me, for one I noticed that the SCSI hard drive in dual fan case is listed as running at 138 degrees Farenheit, making their HD cooling solution beat it by 34 degrees. The fact is that ALL of my SCSI enclosures run at 125 to 130 degrees. They start to alarm at 130 and warn me of failure. The average is around 127 degrees across about 30 drives. This means that they are beating the HD fan solution by 13 degrees. This also makes me wonder if that is the case since they pushed the higher numeber up did they also push the lower number down, is the total savings closer to 5 or 6 degrees? With this noted, that they are playing with the HD cooling numbers, how many of the other numbers they list are being played with?
With the fact that their solution can only handle 3 devices total this does not make HD cooling overly practical.
I also noticed that their case did not contain any case fans for other circulation, with their solution only providing cooling for three devices (let's pick CPU, Power Supply and one HD) That means you have to air cool the rest. Their case does not seem to have good ariflow, and if I am having to add case fans then I am loosing the quieting fucntionalty that is desired.
this looks like a good idea , and from reading the FAQ they have put some thought into this (especially in the area of condensation) but until they can handle more device off of the pump in the case I think I would personally give this a miss.
Papa Legba come and open the gate
What was the cooling fluid?
Numbers 31:17,18 Now kill all the boys. And kill every woman who has slept with a man,but save for yourselves every virg
Bullshit. USA Today had an article in it a few weeks ago about how California is the lowest state in per-capita energy consumption, at about 6 thousand kWhrs per person per year. The worst state was more the 4 times as high. Obviously, the problem is simply that they aren't generating enough electricity to keep up with demand. population * per-capita consumption * saftey margin = generation capacity needed, and Califonia just cant meet that. maybe it has something to do with the fact that a new power plant hasn't been built in over ten years? Nah.
Numbers 31:17,18 Now kill all the boys. And kill every woman who has slept with a man,but save for yourselves every virg
To rip the electronic-stuff out and use the tower as a refigerator?
Both water and Peltier coolers have some issues with hardware destruction. The water lines sometimes DO leak. Peltiers (these days referred to as thermoelectric coolers, or TEC's) may leave condensation. The net results are mold and/or corrosion.
These days overclocking doesn't seem as worthwhile, though. You save money and get better performance just by buying the faster rated processor. Nobody wants the GHz Athlon anymore because the 1.33 is only a few bucks more, and the price difference between the two is significantly smaller than the cost of midrange/high end cooling kit.
I registered my hate for Jon Katz
Couldn't we just make a transmitter that inverts the sound waves to cancel them out? Most of the noise is predictable. I've seen this for mufflers, but cannot remember which manufacturer used it.
I really hate Dan Patrick.
They're called peltier devices, and they're still around. They're not popular because they require water cooling to work well with the current batch of CPUs.
See, an AMD Thunderbird will dissipate as much heat as a sizable incandescent light bulb and do it in a very, very small space. Peltier devices aren't magic -- they still have to obey the laws of physics. Yes, one side gets cool, but the heat has to go somewhere. It goes to the other side.
The catch is that the peltier device draws a lot of current, so it has to dissipate a lot of heat of its own. So, collect all of the heat coming off your CPU, plus all of the added power dissipation (a huge amount) generated by the peltier device. All of this heat will turn up on the "warm side" of the peltier, which really ought to be called the "hot as freaking lava" side.
If you hook a 100 watt peltier up to your Athlon (which you'll need because an athlon may be dissipating 60-80 watts) and you don't water cool your peltier, you'll quite literally melt it to pieces and it will stop working within a matter of minutes or even seconds. Of course, once the peltier has more or less dissolved into little chunks, there will be no "cool side" to keep your CPU cool and your CPU will fry as well.
Even if you do get a peltier+water rig working, it's never quite safe because the cool side gets so much cooler than room temperature that condensation starts to form all over the place and you end up shorting your CPU out anyway.
In short, it's safer to just cool things to room temperature using a water rig without the peltier element, which is just too risky and will still need water to cool it with any recent CPU.
STOP . AMERICA . NOW
You could do it with a series of Peltier Elements. Loop your coils through a few heat sinks attached to them and you would have an effective heat pump that would be noise-free. However, the cost would be prohibitive since they run about 25 bucks apiece and use quite a bit of power.
If Moore's Law is to continue, liquid cooled computers are probably an inevitability. After all, in order to stuff more transistors into the chips you have to make the wires smaller which increases resistance and thus heat output. Sooner or later, our air cooling systems just won't cut it anymore...
But then, that's me.
Nevertheless, I do know that fans represent energy lost trying to cool things that are wasting energy. When there're computers in your beer can and your BVDs they won't need fans, they'll be silent. But then, maybe we'll think back to when you could tell where the computer was by the noise it made.
MjM
XKCD:Xeric Knowledge Comically Dispen
But do the machines really make so much noise so as to disturb one from other activities? I watch TV as well as listen to music while working at something, at other times my kids are doing the watching while I work, but I've never had any problems.
There's always sufficient, but not always at the right place nor for the right folks.
I am running one now and it works great. I still need to buy a peltier cooler for it, but other than that, its workiing like a charm. I barely hear a hum coming from it (which are the fans in the back cooling the water).
One thing about this case, is that its HEAVY! It weighs a ton! So it must have a good bit of water in the base.
I would recomend this case to anyone, very easy to setup, very nice look, and very cool.
If Godzilla did not exist, man would have had to create him.
Taiwanians, being famous for their overclocking fenzy, made water-cooler for CPU years ago:
Slot 1 version Socket 7 version The Water PumpDura-Lube! :)
Two Wrongs Don't Make A Right-- But They Make Me Feel A Whole Lot Better
--
Top Most Bizarre/Disturbing Error Messages
Of course - I can't imagine UL signing off on these Power Supplies, but maybe they already have if they are robust enough. Are they UL listed? If not I can imagine this will be an issue of concern in the corporate world.
--
Top Most Bizarre/Disturbing Error Messages
>Hello Koolance? ... it is ... your monitor must be ... defective ...
Yes? How can I help you?
>My computer isn't on
Ok, well just turn it on
>I've tried
What happened when you tried?
>I heard loud cackling and the power supply smoked
Uh oh. You don't say?
>Yeah I thought it was supposed to run quietly
Well it is quite now isn't it?
>Yeah but it isn't running
Sure
>Oh. It worked fine earlier today though.
Um
*clunk*
*dial tone* *sigh*
When shall people learn that liquids and electricity don't mix?
**AA: a bunch of mindless jerks who'll be the first against the wall when the revolution comes
I wonder how well this water cooling system would work with Intel's Pentium 4 processors? One of the problems people had with the P4 is that the dang thing would slow itself down when the chip got too warm. Would a good water cooling system keep this from occurring? I'd love to see benchmarks on air-cooled versus water-cooled P4 systems...
Should've read more. I suppose one could swap the power supply for a conventional unit with a fan, and then have the water cooling system handle only the processor, chipset and video heat sinks...
...what happens when the pump dies? Will your OC'd CPU bake to kingdom come? One advantage with having fans is that you can often hear when they are on the fritz and about to die, giving you time to compensate and put a replacement in. But if the pump is so quiet, would you know when it's about to croak? How can you tell? How quickly and easily could you get a replacement pump for it?
HardOCP did a review of the Koolance a while ago:
http://hardocp.com/reviews/cooling/koolance/
Ever wonder WHY California is running out of power NOW? Guess what - it ain't environmentalists and it ain't oil shortages. It's a staggering increase in demand due to the increased number of electronic devices, in particular air conditioners and computers. Server farms are especially a problem. But instead of investing in more efficient chip designs like PowerPCs or Transmeta Crusoe processors, they run them off of hot, inefficient Pentium 3s, 4s, and so on. And now they're overclocking and water cooling them? For crying out loud, does your mp3 program really need that much?
cryptochrome
---If you can't trust a nerd, who can you trust?
I'm leery of plugging anything even remotely close to leaking into a computer. (How often does my car leak, you ask?)
Does anyone know what happened to those cooling systems that used a crystal that would absorb/emit heat as electricity was applied? I remember seeing ads for them as much as 8 years ago, then they suddenly disappeared...
They just strike me as the best of both worlds.. an actual cooling affect instead of a fan, without the risk of a liquid based system. (These crystals *were* mounted on a fan, they were energized on the one side and released on the outside so as to yank the heat out of whatever they were mounted on)
Will RAM speed and peripheral data tranfer speed ever equal CPU clock speed? Talk about heat!
After running my computer for 2 hours in my 85 degree room, my computer would constantly lock-up. In a moment of anger, I pulled off the case and took my 18 inch window fan and ran it facing the motherboard. The computer works fine now and never locks up. It certainly isn't a pretty solution, but it does show that heat is a serious problem for PCs, and may worsen in the future with everfaster CPU and bus clock speeds. Will RAM speed and peripheral data transfer speed ever equal CPU clock speed? Talk about heat!
Amen that. A few months ago I was installing a second IDE drive (Maxtor,15G) in a Sun workstation, and I thought for a while that I must have done something wrong. I could not hear any chugging or spinning, and when I put my hand on it I could feel no vibrations, so I assumed I had damaged the drive. But from the software side of things, the drive looked just fine. It's not that long ago, that standing in front of a disk array booting up, was almost like sticking your head into a jet engine.
-- Another senseless waste of fine bytes.
I am conducting a study at work, trying to evaluate new ways of cooling computer and telecom devices, on many applications, ranging from a simple home appliance, to a data center, or public telephone equipment. We are trying to change the usual solution of cooling an entire room, in order to control the equipment temperature. Our goal is to act directly on the main heat spots, cooling just the equipment case, or compartment, and not the entire room space. By doing this, we can have better temperature control inside the equipment, and of course save lots of energy. This could be used specially on places were equipment is working alone, and almost no human presence is needed (this is very common on many situations). Ex: Not just considering the above case, water cooled, I have seen some products that are designed to cool rack mount systems... What do you think about this issue? Do you consider a solution like this useful? Thanks, rTx
I'll leave the water-cooled cases to the serious overclockers. I'd rather go to the source of the problem. Cyrix supposedly has a CPU that doesn't need a fan. If I can find it available anywhere, I'm building me a new machine with old-style hardware - Socket 370 with a "C3" running at 733.
Hey, that's more than twice what I'm using now, I'm not a big gamer, and it'll be QUIET! (Sorry. Didn't mean to yell).
Of course, if anyone has built (or found) such a machine, I'd be interested to know what your experience has been like.
Just a bit of firsthand knowledge...Been using a Koolance case for about 2 weeks now. Hardware in short supply, had to cannibalize from one of my old cases.. pretty bare bones in the fancy dept. no slide in MB tray or slide out type drive cages.. contrary to reports posted.. the case is heavy but not a gut buster.. I purchased the case w/o PS cooling.. but with a PS that has it's own fan. Now the bad news. Within 24 hrs, while I was sleeping, one of the hoses came loose and pumped all the water into the case.. can we say water and electricity don't mix? I can attest to the wake up ability of the alarm system built into the system.. bloody loud! I was amazingly lucky and survived the ordeal unscathed, without losing a single component.. but scared silly.. yes indeedy...My Athlon 1.2G must of hit absolute max temp.. before I could shut the system off.. tough little bugger to survive the ordeal. My conclusion.. the worst water line clamps I have ever seen.. merely crimped.. after firing off a nasty note to Koolance.. my reply was that a contaminated water solution caused the problem , creating a gas buildup.. thus the extra pressure popped the line. Solution, my own clamps.. runs fine with no more mishaps.. Overall, I like it.. but a serious OC'er should pass (stable at 42C non-OC'd 1.2G T-bird) -that's temp reported by ALI HW Monitor(CPU).. cooling is good, but not great.. quiet as a mouse tho.. and I have one 80mm fan(exhaust), other than the PS fan installed.. If you buy.. drain the fulid, replace it.. and definitely make your own clamps.